| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add helpers to get ports and endpoints from DT data.
These helpers parse v4l2 style ports and endpoints, but compared to the
v4l2 helpers, these allow iterating ports and endpoints separately.
This is a temporary solution until we get generic code to parse the
ports and endpoints.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
|
|
Some newer Atom CPUs, eg Avoton and Bay Trail, use slightly different
register layouts for the iTCO than the current v1 and v2 iTCO.
Differences from previous iTCO versions include:
- The ACPI space is enabled in the "ACPI base address" register instead
of the "ACPI control register"
- The "no reboot" functionality is set in the "Power Management
Configuration" register instead of the "General Control and Status"
(GCS) register or PCI configuration space.
- The "ACPI Control Register" is not present on v3. The "Power
Management Configuration Base Address" register resides at the same
address is Avoton/Bay Trail.
To differentiate these newer chipsets create a new v3 iTCO version and
update the MFD driver to support them.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add a driver for the BCM590xx PMU multi-function devices. The driver
initially supports regmap initialization and instantiation of the
voltage regulator device function of the PMU.
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch updates the register definitions for DA9063 to support the
production silicon variant code ID (0x5). These changes are not backwards
compatible with the previous register definitions and can only be used
with the production variant of DA9063.
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add read and write helper functions that the pm8921-core driver
can use to read and write ssbi registers via a "no-bus" regmap.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Convert this driver to use irqdomains so that the PMIC's child
devices can be converted to devicetree.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
The pm8xxx-irq.c code is practically mandatory given that the
pm8921-core driver will WARN about it missing and the Kconfig
marks it as default y when a PM8xxx chips is enabled. The only
reason the file was split out was because we planned to support
other pm8xxx chips with different pm8xxx-core.c files. Now that
we have DT on ARM this isn't necessary because we should be able
to support all the ssbi based PM8xxx chips in one driver and one
file with no data bloat. Let's move this code into the only
driver that uses it right now (pm8921) so that it's always compiled when
needed. In the future we can rename pm8921-core.c to something
more generic.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add the hash define for the new variant of the DA9053 PMIC called BC.
Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
All those IDs are arbitrary and so can be encapsulated into an enumeration.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add the correct silicon variant code ID (0x5) to the driver. This
new code is the 'production' variant code ID for DA9063.
This patch will remove the older variant code ID which matches the
pre-production silicon ID (0x3) for the DA9063 chip.
There is also some small amount of correction done in this patch:
it splits the revision code and correctly names it according to
the hardware specification and moves the dev_info() call before
the variant ID test.
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The TPS65218 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:
- Regulators.
- Over Temperature warning and Shut down.
This patch adds support for tps65218 mfd device. At this time only
the regulator functionality is made available.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Expose some DSP registers which are useful for DSP users to be able to
access whilst debugging their firmware.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Expose some DSP registers which are useful for DSP users to be able to
access whilst debugging their firmware.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Remove not needed max14577-private.h header inclusion in the main driver
header. Remove obvious comment.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Remove unused symbol: enum max14577_irq_source.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
|
|
Now only fixed rate clocks are appended into the clock driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
|
|
This patch move simply OF helper function to extcon core and change function
name as following:
- of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle()
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
|
|
This patch changes each mb_cache's both block and index hash chains to
use a hlist_bl_node, which contains a built-in lock. This is the
first step in decoupling of locks serializing accesses to mb_cache
global data and each mb_cache_entry local data.
Signed-off-by: T. Makphaibulchoke <tmac@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.
It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents
This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.
Also add appropriate tracepoints.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Allow arches to decided to ignore a probe hit. ARM will use this to
only call handlers if the conditions to execute a conditionally executed
instruction are satisfied.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
|
|
Tejun says:
"At least for libata, worrying about suspend/resume failures don't make
whole lot of sense. If suspend failed, just proceed with suspend. If
the device can't be woken up afterwards, that's that. There isn't
anything we could have done differently anyway. The same for resume, if
spinup fails, the device is dud and the following commands will invoke
EH actions and will eventually fail. Again, there really isn't any
*choice* to make. Just making sure the errors are handled gracefully
(ie. don't crash) and the following commands are handled correctly
should be enough."
The only libata user that actually cares about the result from a suspend
operation is libsas. However, it only cares about whether queuing a new
operation collides with an in-flight one. All libsas does with the
error is retry, but we can just let libata wait for the previous
operation before continuing.
Other cleanups include:
1/ Unifying all ata port pm operations on an ata_port_pm_ prefix
2/ Marking all ata port pm helper routines as returning void, only
ata_port_pm_ entry points need to fake a 0 return value.
3/ Killing ata_port_{suspend|resume}_common() in favor of calling
ata_port_request_pm() directly
4/ Killing the wrappers that just do a to_ata_port() conversion
5/ Clearly marking the entry points that do async operations with an
_async suffix.
Reference: http://marc.info/?l=linux-scsi&m=138995409532286&w=2
Cc: Phillip Susi <psusi@ubuntu.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
into for-3.15/drivers
Kent writes:
Jens, here's the bcache changes for 3.15. Lots of bugfixes, and some
refactoring and cleanups.
|
|
The _install_special_mapping() is the new base function for
install_special_mapping(). This function will return a pointer of the
created VMA or a error code in an ERR_PTR()
This new function will be needed by the for the vdso 32 bit support to map the
additonal vvar and hpet pages into the 32 bit address space. This will be done
with io_remap_pfn_range() and remap_pfn_range, which requieres a vm_area_struct.
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Link: http://lkml.kernel.org/r/1395094933-14252-3-git-send-email-stefani@seibold.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
This is a context modified revert of commit 6a9612e2cb22
("net: cdc_ncm: remove ncm_parm field") which introduced
a NCM specification violation, causing setup errors for
some devices. These errors resulted in the device and
host disagreeing about shared settings, with complete
failure to communicate as the end result.
The NCM specification require that many of the NCM specific
control reuests are sent only while the NCM Data Interface
is in alternate setting 0. Reverting the commit ensures that
we follow this requirement.
Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field")
Reported-and-tested-by: Pasi Kärkkäinen <pasik@iki.fi>
Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This was originally added as at optimization that for various reasons isn't
needed anymore, but it does add a lot of nasty corner cases (and it was
responsible for some recently fixed bugs). Just get rid of it now.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
Change the invalidate tracepoint to indicate how much data we're invalidating,
and change the alloc tracepoints to indicate what offset they're for.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
One patch to rename a newly introduced struct. The rest is
the rework of the IPsec virtual tunnel interface for ipv6 to
support inter address family tunneling and namespace crossing.
1) Rename the newly introduced struct xfrm_filter to avoid a
conflict with iproute2. From Nicolas Dichtel.
2) Introduce xfrm_input_afinfo to access the address family
dependent tunnel callback functions properly.
3) Add and use a IPsec protocol multiplexer for ipv6.
4) Remove dst_entry caching. vti can lookup multiple different
dst entries, dependent of the configured xfrm states. Therefore
it does not make to cache a dst_entry.
5) Remove caching of flow informations. vti6 does not use the the
tunnel endpoint addresses to do route and xfrm lookups.
6) Update the vti6 to use its own receive hook.
7) Remove the now unused xfrm_tunnel_notifier. This was used from vti
and is replaced by the IPsec protocol multiplexer hooks.
8) Support inter address family tunneling for vti6.
9) Check if the tunnel endpoints of the xfrm state and the vti interface
are matching and return an error otherwise.
10) Enable namespace crossing for vti devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
1) Fix a sleep in atomic when pfkey_sadb2xfrm_user_sec_ctx()
is called from pfkey_compile_policy().
Fix from Nikolay Aleksandrov.
2) security_xfrm_policy_alloc() can be called in process and atomic
context. Add an argument to let the callers choose the appropriate
way. Fix from Nikolay Aleksandrov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is apparently a dependency for the STi reset controller driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.stlinux.com/devel/kernel/linux-sti into next/dt
Merge "STi DT changes part 1 v2" from Srinivas Kandagatla:
Patches : 01-02 are DT patches, adding interrupt support to pin
controller driver, Driver changes are already going via Linus W's
pinctrl tree.
Patches: 03 - 06 are DT patches for reset/softreset controller. Reset
controller driver is Acked by Philipp Zabel.
Patches: 07, 08 are DT patches, adding Ethernet controller support
patches, actual driver changes are already in v3.14-rc4 via Dave Millers
net tree.
Patches: 09, 10 are DT patches for IR driver support, actual IR driver
is already available since v3.12. Reason for the delay is due to
dependency on reset controller driver/headers.
* tag 'DT-for-v3.15-part-1-v2' of git://git.stlinux.com/devel/kernel/linux-sti:
ARM: STi: STIH416: Add IR support.
ARM: STi: STIH415: Add IR support.
ARM: STi: STiH416: Add ethernet support.
ARM: STi: STiH415: Add ethernet support.
ARM: STi: STiH416: Add soft reset controller support.
ARM: STi: STiH416: Add reset controller support.
ARM: STi: STiH415: Add soft reset controller support.
ARM: STi: STiH415: Add reset controller support.
ARM: STi: STiH415: Add interrupt support for pin controller
ARM: STi: STiH416: Add interrupt support for pin controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
syscore->resume() callback is expected to do not enable interrupts,
it generates warning like below otherwise:
[ 9386.365390] WARNING: CPU: 0 PID: 6733 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0()
[ 9386.365403] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor]
...
[ 9386.365429] Call Trace:
[ 9386.365434] [<ffffffff81667a8b>] dump_stack+0x45/0x56
[ 9386.365437] [<ffffffff8106921d>] warn_slowpath_common+0x7d/0xa0
[ 9386.365439] [<ffffffff8106928c>] warn_slowpath_fmt+0x4c/0x50
[ 9386.365442] [<ffffffffa0261bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor]
[ 9386.365443] [<ffffffff814055fa>] syscore_resume+0x9a/0xe0
[ 9386.365445] [<ffffffff810aef42>] suspend_devices_and_enter+0x402/0x470
[ 9386.365447] [<ffffffff810af128>] pm_suspend+0x178/0x260
On xen_acpi_processor_resume() we call various procedures, which are
non atomic and can enable interrupts. To prevent the issue introduce
separate resume notify called after we enable interrupts on resume
and before we call other drivers resume callbacks.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Add support for MSI message groups for Xen Dom0 using the
MAP_PIRQ_TYPE_MULTI_MSI pirq map type.
In order to keep track of which pirq is the first one in the group all
pirqs in the MSI group except for the first one have the newly
introduced PIRQ_MSI_GROUP flag set. This prevents calling
PHYSDEVOP_unmap_pirq on them, since the unmap must be done with the
first pirq in the group.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
When used 64bit compiler GCC warns as
drivers/mfd/sec-core.c:199:10: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding
interrupts are named similarly). Use consistent names for interrupts to
limit possible errors.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add maximum register to the regmap used by rtc-s5m driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Let the drivers specify the name of the I2C-over-AUX adapter to maintain
backwards compatibility in the sysfs when converting to the new
I2C-over-AUX helper infrastructure.
The i915 driver currently uses DPDDC-A to DPDDC-D as names for the DP
i2c adapters. These names show up in the i2c sysfs name attribute. We'd
like to be able to maintain that when switching over to the new helpers.
Due to i2c device and connector cleanup ordering issues we also recently
made the drm device (instead of connector) the parent of the i2c
adapters:
commit 80f65de3c9b8101c1613fa82df500ba6a099a11c
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Feb 11 17:12:49 2014 +0200
drm/i915: dp: fix order of dp aux i2c device cleanup
With the name picked up from the adapter parent using dev_name(), it
would be the same for all i2c adapters with the current I2C-over-AUX
helpers.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
drm-next
This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.
* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
drm: init TTM dev_mapping in ttm_bo_device_init()
drm: use anon-inode instead of relying on cdevs
drm: add pseudo filesystem for shared inodes
|
|
Linux 3.14-rc7
Backmerge to help out Intel guys.
|
|
drm-next
Here's my drm documentation update and driver api polish pull request.
Alex reviewed the entire pile, I've applied a little bit of spelling
polish in a few places since then and otherwise the Usual Suspects (David,
Rob, ...) don't seem up to have another look at it (I've poked them on
irc). So I think it's as good as it gets ;-)
Note that I've dropped the final imx breaker patch since that's blocked on
imx getting sane. Once that's landed I'll ping you to pick up that
straggler.
* 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits)
drm/imx: remove drm_mode_connector_detach_encoder harder
drm: kerneldoc polish for drm_crtc.c
drm: kerneldoc polish for drm_crtc_helper.c
drm: drop error code for drm_helper_resume_force_mode
drm/crtc-helper: remove LOCKING from kerneldoc
drm: remove return value from drm_helper_mode_fill_fb_struct
drm/doc: Fix misplaced </para>
drm: remove drm_display_mode->private_size
drm: polish function kerneldoc for drm_modes.[hc]
drm/modes: drop maxPitch from drm_mode_validate_size
drm/modes: drop return value from drm_display_mode_from_videomode
drm/modes: remove drm_mode_height/width
drm: extract drm_modes.h for drm_crtc.h functions
drm: move drm_mode related functions into drm_modes.c
drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
drm/doc: Integrate drm_modes.c kerneldoc
drm/kms: rip out drm_mode_connector_detach_encoder
drm/doc: Add function reference documentation for drm_mm.c
drm/doc: Overview documentation for drm_mm.c
drm/mm: Remove MM_UNUSED_TARGET
...
|
|
Add a simple twl_i2c_read/write_u16 wrapper over
the twl_i2c_read/write, which is similar to the
twl_i2c_read/write_u8 wrapper.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Some style fixes in twl4030-madc driver.
Reported-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
iSCSI needs to be at least aware that a task involves protection
information. In case it does, after the transaction completed libiscsi
will ask the transport to check the protection status of the
transaction.
Unlike transport errors, DIF errors should not prevent successful
completion of the transaction from the transport point of view, but
should be escelated to scsi mid-layer when constructing the scsi
result and sense data.
check_protection routine will return the ascq corresponding to the DIF
error that occured (or 0 if no error happened).
return ascq:
- 0x1: GUARD_CHECK_FAILED
- 0x2: APPTAG_CHECK_FAILED
- 0x3: REFTAG_CHECK_FAILED
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This reverts commit aae576e5faefa8ba70647efa320d4747b6375f1e.
Push and Pop are not portable "enough", and caused problems for
some ACPICA customers.
Signed-off-by: Robert Moore <Robert.Moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Conflicts:
include/acpi/platform/aclinux.h
|
|
Version 20140214.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
