summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2014-05-17net: cdc_ncm: use sane defaults for rx/tx buffersBjørn Mork1-0/+4
Lots of devices request much larger buffers than reasonable. This cause real problems for users of hosts with limited resources. Reducing the default buffer size to 16kB for such devices is a reasonable trade-off between allowing them to aggregate traffic and avoiding memory exhaustion on resource restrained hosts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm/cdc_mbim: adding NCM protocol statisticsBjørn Mork1-0/+11
To have an idea of the effects of the protocol coalescing it's useful to have some counters showing the different aspects. Due to the asymmetrical usbnet interface the netdev rx_bytes counter has been counting real received payload, while the tx_bytes counter has included the NCM/MBIM framing overhead. This overhead can be many times the payload because of the aggressive padding strategy of this driver, and will vary a lot depending on device and traffic. With very few exceptions, users are only interested in the payload size. Having an somewhat accurate payload byte counter is particularly important for mobile broadband devices, which many NCM devices and of course all MBIM devices are. Users and userspace applications will use this counter to monitor account quotas. Having protocol specific counters for the overhead, we are now able to correct the tx_bytes netdev counter so that it shows the real payload Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: set reasonable padding limitsBjørn Mork1-0/+1
We pad frames larger than X to maximum size for devices which don't need a ZLP after maximum sized frames. This allows the device to optimize its transfers for one fixed buffer size. X was arbitrarily set at 512 bytes regardless of real buffer maximum, causing extreme overheads due to excessive padding of larger tx buffers. Limit the padding to at most 3 full USB packets, still allowing the overhead to payload ratio of 3/1. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: use true max dgram count for header estimatesBjørn Mork1-9/+1
Many newer NCM and MBIM devices will request a maximum tx datagram count which is much smaller than our hard-coded absolute max. We can reduce the overhead without sacrificing any of the simplicity for these devices, by simply using the true negotiated count in when calculated the maximum NTH and NDP header sizes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: cdc_ncm: use ethtool to tune coalescing settingsBjørn Mork1-1/+5
Datagram coalescing is an integral part of the NCM and MBIM protocols, intended to reduce the interrupt load primarily on the device end of the USB link. As with all coalescing solutions, there is a trade-off between buffering and interrupts. The current defaults are based on the assumption that device side buffers should be the limiting factor. However, many modern high speed LTE modems suffers from buffer-bloat, making this assumption fail. This results in sub-optimal performance due to excessive coalescing. And in cases where such modems are connected to cheap embedded hosts there is often severe buffer allocation issues, giving very noticeable performance degradation . A start on improving this is going from build time hard coded limits to per device user configurable limits. The ethtool coalescing API was selected as user interface because, although the tuned values are buffer sizes, these settings directly control datagram coalescing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17bonding: Fix stacked device detection in arp monitoringVlad Yasevich2-0/+15
Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17macvlan: Fix lockdep warnings with stacked macvlan devicesVlad Yasevich1-0/+1
Macvlan devices try to avoid stacking, but that's not always successfull or even desired. As an example, the following configuration is perefectly legal and valid: eth0 <--- macvlan0 <---- vlan0.10 <--- macvlan1 However, this configuration produces the following lockdep trace: [ 115.620418] ====================================================== [ 115.620477] [ INFO: possible circular locking dependency detected ] [ 115.620516] 3.15.0-rc1+ #24 Not tainted [ 115.620540] ------------------------------------------------------- [ 115.620577] ip/1704 is trying to acquire lock: [ 115.620604] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.620686] but task is already holding lock: [ 115.620723] (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.620795] which lock already depends on the new lock. [ 115.620853] the existing dependency chain (in reverse order) is: [ 115.620894] -> #1 (&macvlan_netdev_addr_lock_key){+.....}: [ 115.620935] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.620974] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621019] [<ffffffffa07296c3>] vlan_dev_set_rx_mode+0x53/0x110 [8021q] [ 115.621066] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621105] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621143] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] -> #0 (&vlan_netdev_addr_lock_key/1){+.....}: [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] other info that might help us debug this: [ 115.621174] Possible unsafe locking scenario: [ 115.621174] CPU0 CPU1 [ 115.621174] ---- ---- [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] *** DEADLOCK *** [ 115.621174] 2 locks held by ip/1704: [ 115.621174] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815e6dbb>] rtnetlink_rcv+0x1b/0x40 [ 115.621174] #1: (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.621174] stack backtrace: [ 115.621174] CPU: 3 PID: 1704 Comm: ip Not tainted 3.15.0-rc1+ #24 [ 115.621174] Hardware name: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010 [ 115.621174] ffffffff82339ae0 ffff880465f79568 ffffffff816ee20c ffffffff82339ae0 [ 115.621174] ffff880465f795a8 ffffffff816e9e1b ffff880465f79600 ffff880465b019c8 [ 115.621174] 0000000000000001 0000000000000002 ffff880465b019c8 ffff880465b01230 [ 115.621174] Call Trace: [ 115.621174] [<ffffffff816ee20c>] dump_stack+0x4d/0x66 [ 115.621174] [<ffffffff816e9e1b>] print_circular_bug+0x200/0x20e [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d3172>] ? trace_hardirqs_on_caller+0xb2/0x1d0 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff811e1db1>] ? mem_cgroup_bad_page_check+0x21/0x30 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff810d394c>] ? __lock_acquire+0x37c/0x1a60 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815ea169>] ? rtnl_newlink+0xe9/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff810d329d>] ? trace_hardirqs_on+0xd/0x10 [ 115.621174] [<ffffffff815e6dbb>] ? rtnetlink_rcv+0x1b/0x40 [ 115.621174] [<ffffffff815e6de0>] ? rtnetlink_rcv+0x40/0x40 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff8119d4f8>] ? might_fault+0xa8/0xb0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff815cb51e>] ? verify_iovec+0x5e/0xe0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff816faa0d>] ? __do_page_fault+0x11d/0x570 [ 115.621174] [<ffffffff810cfe9f>] ? up_read+0x1f/0x40 [ 115.621174] [<ffffffff816fab04>] ? __do_page_fault+0x214/0x570 [ 115.621174] [<ffffffff8120a10b>] ? mntput_no_expire+0x6b/0x1c0 [ 115.621174] [<ffffffff8120a0b7>] ? mntput_no_expire+0x17/0x1c0 [ 115.621174] [<ffffffff8120a284>] ? mntput+0x24/0x40 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b Fix this by correctly providing macvlan lockdep class. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17vlan: Fix lockdep warning with stacked vlan devices.Vlad Yasevich1-1/+2
This reverts commit dc8eaaa006350d24030502a4521542e74b5cb39f. vlan: Fix lockdep warning when vlan dev handle notification Instead we use the new new API to find the lock subclass of our vlan device. This way we can support configurations where vlans are interspersed with other devices: bond -> vlan -> macvlan -> vlan Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: Allow for more then a single subclass for netif_addr_lockVlad Yasevich1-1/+7
Currently netif_addr_lock_nested assumes that there can be only a single nesting level between 2 devices. However, if we have multiple devices of the same type stacked, this fails. For example: eth0 <-- vlan0.10 <-- vlan0.10.20 A more complicated configuration may stack more then one type of device in different order. Ex: eth0 <-- vlan0.10 <-- macvlan0 <-- vlan1.10.20 <-- macvlan1 This patch adds an ndo_* function that allows each stackable device to report its nesting level. If the device doesn't provide this function default subclass of 1 is used. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: Find the nesting level of a given device by type.Vlad Yasevich1-0/+10
Multiple devices in the kernel can be stacked/nested and they need to know their nesting level for the purposes of lockdep. This patch provides a generic function that determines a nesting level of a particular device by its type (ex: vlan, macvlan, etc). We only care about nesting of the same type of devices. For example: eth0 <- vlan0.10 <- macvlan0 <- vlan1.20 The nesting level of vlan1.20 would be 1, since there is another vlan in the stack under it. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17ieee802154: add netlink interfaces for llsecPhoebe Buckheister1-0/+31
This patch adds user-visible interfaces for the llsec infrastructure. For the added methods, the only major difference between all add/remove implementation lies in how the specific object is parsed, and for dump requests, how objects are written into netlink messages. To save on boilerplate code, table dumps are routed through a helper function that handles netlink dump state, leaving the actual dumping code to care only about iterating over the table to be dumped and filling netlink messages. For add/remove methods, the boilerplate required to work is not quite as large, but still enough to also move into a local helper. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17of: provide a binding for fixed link PHYsThomas Petazzoni1-0/+15
Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17net: phy: extend fixed driver with fixed_phy_register()Thomas Petazzoni1-0/+11
The existing fixed_phy_add() function has several drawbacks that prevents it from being used as is for OF-based declaration of fixed PHYs: * The address of the PHY on the fake bus needs to be passed, while a dynamic allocation is desired. * Since the phy_device instantiation is post-poned until the next mdiobus scan, there is no way to associate the fixed PHY with its OF node, which later prevents of_phy_connect() from finding this fixed PHY from a given OF node. To solve this, this commit introduces fixed_phy_register(), which will allocate an available PHY address, add the PHY using fixed_phy_add() and instantiate the phy_device structure associated with the provided OF node. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarilyRafael J. Wysocki2-8/+34
Currently, some subsystems (e.g. PCI and the ACPI PM domain) have to resume all runtime-suspended devices during system suspend, mostly because those devices may need to be reprogrammed due to different wakeup settings for system sleep and for runtime PM. For some devices, though, it's OK to remain in runtime suspend throughout a complete system suspend/resume cycle (if the device was in runtime suspend at the start of the cycle). We would like to do this whenever possible, to avoid the overhead of extra power-up and power-down events. However, problems may arise because the device's descendants may require it to be at full power at various points during the cycle. Therefore the most straightforward way to do this safely is if the device and all its descendants can remain runtime suspended until the complete stage of system resume. To this end, introduce a new device PM flag, power.direct_complete and modify the PM core to use that flag as follows. If the ->prepare() callback of a device returns a positive number, the PM core will regard that as an indication that it may leave the device runtime-suspended. It will then check if the system power transition in progress is a suspend (and not hibernation in particular) and if the device is, indeed, runtime-suspended. In that case, the PM core will set the device's power.direct_complete flag. Otherwise it will clear power.direct_complete for the device and it also will later clear it for the device's parent (if there's one). Next, the PM core will not invoke the ->suspend() ->suspend_late(), ->suspend_irq(), ->resume_irq(), ->resume_early(), or ->resume() callbacks for all devices having power.direct_complete set. It will invoke their ->complete() callbacks, however, and those callbacks are then responsible for resuming the devices as appropriate, if necessary. For example, in some cases they may need to queue up runtime resume requests for the devices using pm_request_resume(). Changelog partly based on an Alan Stern's description of the idea (http://marc.info/?l=linux-pm&m=139940466625569&w=2). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2014-05-16net/mlx4_core: Add UPDATE_QP SRIOV wrapper supportMatan Barak1-0/+11
This patch adds UPDATE_QP SRIOV wrapper support. The mechanism is a general one, but currently only source MAC index changes are allowed for VFs. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16lib/crc7: Shift crc7() output left 1 bitGeorge Spelvin1-4/+4
This eliminates a 1-bit left shift in every single caller, and makes the inner loop of the CRC computation more efficient. Renamed crc7 to crc7_be (big-endian) since the interface changed. Also purged #include <linux/crc7.h> from files that don't use it at all. Signed-off-by: George Spelvin <linux@horizon.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16cgroup: implement css_tryget()Tejun Heo1-0/+18
Implement css_tryget() which tries to grab a cgroup_subsys_state's reference as long as it already hasn't reached zero. Combined with the recent css iterator changes to include offline && !released csses during traversal, this can be used to access csses regardless of its online state. v2: Take the new flag CSS_NO_REF into account. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-16cgroup: convert cgroup_has_live_children() into css_has_online_children()Tejun Heo1-0/+2
Now that cgroup liveliness and css onliness are the same state, convert cgroup_has_live_children() into css_has_online_children() so that it can be used for actual csses too. The function now uses css_for_each_child() for iteration and is published. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16cgroup: use CSS_ONLINE instead of CGRP_DEADTejun Heo1-2/+0
Use CSS_ONLINE on the self css to indicate whether a cgroup has been killed instead of CGRP_DEAD. This will allow re-using css online test for cgroup liveliness test. This doesn't introduce any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16cgroup: iterate cgroup_subsys_states directlyTejun Heo1-18/+26
Currently, css_next_child() is implemented as finding the next child cgroup which has the css enabled, which used to be the only way to do it as only cgroups participated in sibling lists and thus could be iteratd. This works as long as what's required during iteration is not missing online csses; however, it turns out that there are use cases where offlined but not yet released csses need to be iterated. This is difficult to implement through cgroup iteration the unified hierarchy as there may be multiple dying csses for the same subsystem associated with single cgroup. After the recent changes, the cgroup self and regular csses behave identically in how they're linked and unlinked from the sibling lists including assertion of CSS_RELEASED and css_next_child() can simply switch to iterating csses directly. This both simplifies the logic and ensures that all visible non-released csses are included in the iteration whether there are multiple dying csses for a subsystem or not. As all other iterators depend on css_next_child() for sibling iteration, this changes behaviors of all css iterators. Add and update explanations on the css states which are included in traversal to all iterators. As css iteration could always contain offlined csses, this shouldn't break any of the current users and new usages which need iteration of all on and offline csses can make use of the new semantics. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-16cgroup: introduce CSS_RELEASED and reduce css iteration fallback windowTejun Heo1-0/+1
css iterations allow the caller to drop RCU read lock. As long as the caller keeps the current position accessible, it can simply re-grab RCU read lock later and continue iteration. This is achieved by using CGRP_DEAD to detect whether the current positions next pointer is safe to dereference and if not re-iterate from the beginning to the next position using ->serial_nr. CGRP_DEAD is used as the marker to invalidate the next pointer and the only requirement is that the marker is set before the next sibling starts its RCU grace period. Because CGRP_DEAD is set at the end of cgroup_destroy_locked() but the cgroup is unlinked when the reference count reaches zero, we currently have a rather large window where this fallback re-iteration logic can be triggered. This patch introduces CSS_RELEASED which is set when a css is unlinked from its sibling list. This still keeps the re-iteration logic working while drastically reducing the window of its activation. While at it, rewrite the comment in css_next_child() to reflect the new flag and better explain the synchronization. This will also enable iterating csses directly instead of through cgroups. v2: CSS_RELEASED now assigned to 1 << 2 as 1 << 0 is used by CSS_NO_REF. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16cgroup: move cgroup->serial_nr into cgroup_subsys_stateTejun Heo1-8/+8
We're moving towards using cgroup_subsys_states as the fundamental structural blocks. All csses including the cgroup->self and actual ones now form trees through css->children and ->sibling which follow the same rules as what cgroup->children and ->sibling followed. This patch moves cgroup->serial_nr which is used to implement css iteration into css. Note that all csses, regardless of their types, allocate their serial numbers from the same monotonically increasing counter. This doesn't affect the ordering needed by css iteration or cause any other material behavior changes. This will be used to update css iteration. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16cgroup: move cgroup->sibling and ->children into cgroup_subsys_stateTejun Heo1-7/+4
We're moving towards using cgroup_subsys_states as the fundamental structural blocks. Let's move cgroup->sibling and ->children into cgroup_subsys_state. This is pure move without functional change and only cgroup->self's fields are actually used. Other csses will make use of the fields later. While at it, update init_and_link_css() so that it zeroes the whole css before initializing it and remove explicit zeroing of ->flags. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16cgroup: remove cgroup->parentTejun Heo1-1/+0
cgroup->parent is redundant as cgroup->self.parent can also be used to determine the parent cgroup and we're moving towards using cgroup_subsys_states as the fundamental structural blocks. This patch introduces cgroup_parent() which follows cgroup->self.parent and removes cgroup->parent. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2014-05-16cgroup: remove css_parent()Tejun Heo1-18/+11
cgroup in general is moving towards using cgroup_subsys_state as the fundamental structural component and css_parent() was introduced to convert from using cgroup->parent to css->parent. It was quite some time ago and we're moving forward with making css more prominent. This patch drops the trivial wrapper css_parent() and let the users dereference css->parent. While at it, explicitly mark fields of css which are public and immutable. v2: New usage from device_cgroup.c converted. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-05-16cgroup: skip refcnting on normal root csses and cgrp_dfl_root self cssTejun Heo1-3/+8
9395a4500404 ("cgroup: enable refcnting for root csses") enabled reference counting for root csses (cgroup_subsys_states) so that cgroup's self csses can be used to manage the lifetime of the containing cgroups. Unfortunately, this change was incorrect. During early init, cgrp_dfl_root self css refcnt is used. percpu_ref can't initialized during early init and its initialization is deferred till cgroup_init() time. This means that cpu was using percpu_ref which wasn't properly initialized. Due to the way percpu variables are laid out on x86, this didn't blow up immediately on x86 but ended up incrementing and decrementing the percpu variable at offset zero, whatever it may be; however, on other archs, this caused fault and early boot failure. As cgroup self csses for root cgroups of non-dfl hierarchies need working refcounting, we can't revert 9395a4500404. This patch adds CSS_NO_REF which explicitly inhibits reference counting on the css and sets it on all normal (non-self) csses and cgroup_dfl_root self css. v2: cgrp_dfl_root.self is the offending one. Set the flag on it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Fixes: 9395a4500404 ("cgroup: enable refcnting for root csses")
2014-05-16gpio: include linux/bug.h in interface headerArnd Bergmann1-0/+1
Today's linux-next kernel started showing build errors for the use of WARN_ON in linux/gpio/consumer.h: In file included from drivers/video/backlight/pwm_bl.c:13:0: include/linux/gpio/consumer.h: In function 'gpiod_put': include/linux/gpio/consumer.h:81:2: error: implicit declaration of function 'WARN_ON' [-Werror=implicit-function-declaration] It's not clear why this never happened before, but this patch fixes it by including the header that contains the defintion of this macro. Signed-off-by: Arnd Bergmann <arnd@arnd.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-16Merge remote-tracking branch 'tip/timers/core/timers/core' into clockevents/3.16Daniel Lezcano10-5/+67
2014-05-16genirq: Remove dynamic_irq messThomas Gleixner1-10/+0
No more users. Get rid of the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140507154341.012847637@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16genirq: Replace dynamic_irq_init/cleanupThomas Gleixner1-0/+4
Create a new interface and confine it with a config switch which makes clear that this is just legacy support and not to be used for new code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140507154340.574437049@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16genirq: Remove irq_reserve_irq[s]Thomas Gleixner1-7/+0
No more users. And it's not going to come back. If you need hotplugable irq chips, use irq domains. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-and-acked-by: Grant Likely <grant.likely@linaro.org> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140507154340.302183048@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16genirq: Make create/destroy_irq() ia64 privateThomas Gleixner1-4/+0
No more users outside of itanic. Confine it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/20140507154338.700598389@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16x86: Remove create/destroy_irq()Thomas Gleixner1-4/+0
No more users. Remove the cruft Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154336.760446122@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16genirq: Provide generic hwirq allocation facilityThomas Gleixner1-0/+15
Not really the solution to the problem, but at least it confines the mess in the core code and allows to get rid of the create/destroy_irq variants from hell, i.e. 3 implementations with different semantics plus the x86 specific variants __create_irqs and create_irq_nr which have been invented in another circle of hell. x86 : x86 should be converted to irq domains and I'm deliberately making it impossible to do the multi-vector MSI support by adding more crap to the current mess. It's not that hard to do and I'm really tired of the trainwrecks which have been invented by baindaid engineering so far. Any attempt to do multi-vector MSI or ioapic hotplug without converting to irq domains is NAKed hereby. tile: Might use irq domains as well, but it has a very limited interrupt space, so handling it via this functionality might be the right thing to do even in the long run. ia64: That's an hopeless case, as I doubt that anyone has the stomach to rewrite the homebrewn dynamic allocation facilities. I stared at it for a couple of hours and gave up. The create/destroy_irq mess could be made private to itanic right away if there wouldn't be the iommu/dmar driver being shared with x86. So to do that I'm going to add a separate ia64 specific implementation later in order not to deep-six itanic right away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154334.208629358@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16Merge branches 'linus' and 'irq/urgent' into irq/coreThomas Gleixner11-11/+38
Reason: Get the upstream and urgent fixes before applying more complex changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16ACPI / PM: Hold ACPI scan lock over the "freeze" sleep stateRafael J. Wysocki1-0/+7
The "freeze" sleep state suffers from the same issue that was addressed by commit ad07277e82de (ACPI / PM: Hold acpi_scan_lock over system PM transitions) for ACPI sleep states, that is, things break if ->remove() is called for devices whose system resume callbacks haven't been executed yet. It also can be addressed in the same way, by holding the ACPI scan lock over the "freeze" sleep state and PM transitions to and from that state, but ->begin() and ->end() platform operations for the "freeze" sleep state are needed for this purpose. This change has been tested on Acer Aspire S5 with Thunderbolt. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-16HSI: Introduce driver for SSI ProtocolSebastian Reichel1-0/+42
This adds a driver for the SSI McSAAB protocol as used in the Nokia N900. Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2014-05-16HSI: Add common DT binding for HSI client devicesSebastian Reichel1-0/+11
Implement and document generic DT bindings for HSI clients. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2014-05-16HSI: export method to (un)register clientsSebastian Reichel1-0/+3
Expose method for registering and unregistering HSI clients, so that client drivers can register other client drivers. This is useful for HSI drivers, which want to use the functionality of other HSI drivers. For example the N900 modem driver can load HSI drivers for mcsaab protocol and speech protocol. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2014-05-16HSI: Add channel resource support to HSI clientsSebastian Reichel1-4/+20
Make HSI channel ids platform data, which can be provided by platform data. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2014-05-16HSI: method to unregister clients from an hsi portSebastian Reichel1-0/+1
This exports a method to unregister all clients from an hsi port. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2014-05-16net: filter: x86: internal BPF JITAlexei Starovoitov1-0/+3
Maps all internal BPF instructions into x86_64 instructions. This patch replaces original BPF x64 JIT with internal BPF x64 JIT. sysctl net.core.bpf_jit_enable is reused as on/off switch. Performance: 1. old BPF JIT and internal BPF JIT generate equivalent x86_64 code. No performance difference is observed for filters that were JIT-able before Example assembler code for BPF filter "tcpdump port 22" original BPF -> old JIT: original BPF -> internal BPF -> new JIT: 0: push %rbp 0: push %rbp 1: mov %rsp,%rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 4: sub $0x228,%rsp 8: mov %rbx,-0x8(%rbp) b: mov %rbx,-0x228(%rbp) // prologue 12: mov %r13,-0x220(%rbp) 19: mov %r14,-0x218(%rbp) 20: mov %r15,-0x210(%rbp) 27: xor %eax,%eax // clear A c: xor %ebx,%ebx 29: xor %r13,%r13 // clear X e: mov 0x68(%rdi),%r9d 2c: mov 0x68(%rdi),%r9d 12: sub 0x6c(%rdi),%r9d 30: sub 0x6c(%rdi),%r9d 16: mov 0xd8(%rdi),%r8 34: mov 0xd8(%rdi),%r10 3b: mov %rdi,%rbx 1d: mov $0xc,%esi 3e: mov $0xc,%esi 22: callq 0xffffffffe1021e15 43: callq 0xffffffffe102bd75 27: cmp $0x86dd,%eax 48: cmp $0x86dd,%rax 2c: jne 0x0000000000000069 4f: jne 0x000000000000009a 2e: mov $0x14,%esi 51: mov $0x14,%esi 33: callq 0xffffffffe1021e31 56: callq 0xffffffffe102bd91 38: cmp $0x84,%eax 5b: cmp $0x84,%rax 3d: je 0x0000000000000049 62: je 0x0000000000000074 3f: cmp $0x6,%eax 64: cmp $0x6,%rax 42: je 0x0000000000000049 68: je 0x0000000000000074 44: cmp $0x11,%eax 6a: cmp $0x11,%rax 47: jne 0x00000000000000c6 6e: jne 0x0000000000000117 49: mov $0x36,%esi 74: mov $0x36,%esi 4e: callq 0xffffffffe1021e15 79: callq 0xffffffffe102bd75 53: cmp $0x16,%eax 7e: cmp $0x16,%rax 56: je 0x00000000000000bf 82: je 0x0000000000000110 58: mov $0x38,%esi 88: mov $0x38,%esi 5d: callq 0xffffffffe1021e15 8d: callq 0xffffffffe102bd75 62: cmp $0x16,%eax 92: cmp $0x16,%rax 65: je 0x00000000000000bf 96: je 0x0000000000000110 67: jmp 0x00000000000000c6 98: jmp 0x0000000000000117 69: cmp $0x800,%eax 9a: cmp $0x800,%rax 6e: jne 0x00000000000000c6 a1: jne 0x0000000000000117 70: mov $0x17,%esi a3: mov $0x17,%esi 75: callq 0xffffffffe1021e31 a8: callq 0xffffffffe102bd91 7a: cmp $0x84,%eax ad: cmp $0x84,%rax 7f: je 0x000000000000008b b4: je 0x00000000000000c2 81: cmp $0x6,%eax b6: cmp $0x6,%rax 84: je 0x000000000000008b ba: je 0x00000000000000c2 86: cmp $0x11,%eax bc: cmp $0x11,%rax 89: jne 0x00000000000000c6 c0: jne 0x0000000000000117 8b: mov $0x14,%esi c2: mov $0x14,%esi 90: callq 0xffffffffe1021e15 c7: callq 0xffffffffe102bd75 95: test $0x1fff,%ax cc: test $0x1fff,%rax 99: jne 0x00000000000000c6 d3: jne 0x0000000000000117 d5: mov %rax,%r14 9b: mov $0xe,%esi d8: mov $0xe,%esi a0: callq 0xffffffffe1021e44 dd: callq 0xffffffffe102bd91 // MSH e2: and $0xf,%eax e5: shl $0x2,%eax e8: mov %rax,%r13 eb: mov %r14,%rax ee: mov %r13,%rsi a5: lea 0xe(%rbx),%esi f1: add $0xe,%esi a8: callq 0xffffffffe1021e0d f4: callq 0xffffffffe102bd6d ad: cmp $0x16,%eax f9: cmp $0x16,%rax b0: je 0x00000000000000bf fd: je 0x0000000000000110 ff: mov %r13,%rsi b2: lea 0x10(%rbx),%esi 102: add $0x10,%esi b5: callq 0xffffffffe1021e0d 105: callq 0xffffffffe102bd6d ba: cmp $0x16,%eax 10a: cmp $0x16,%rax bd: jne 0x00000000000000c6 10e: jne 0x0000000000000117 bf: mov $0xffff,%eax 110: mov $0xffff,%eax c4: jmp 0x00000000000000c8 115: jmp 0x000000000000011c c6: xor %eax,%eax 117: mov $0x0,%eax c8: mov -0x8(%rbp),%rbx 11c: mov -0x228(%rbp),%rbx // epilogue cc: leaveq 123: mov -0x220(%rbp),%r13 cd: retq 12a: mov -0x218(%rbp),%r14 131: mov -0x210(%rbp),%r15 138: leaveq 139: retq On fully cached SKBs both JITed functions take 12 nsec to execute. BPF interpreter executes the program in 30 nsec. The difference in generated assembler is due to the following: Old BPF imlements LDX_MSH instruction via sk_load_byte_msh() helper function inside bpf_jit.S. New JIT removes the helper and does it explicitly, so ldx_msh cost is the same for both JITs, but generated code looks longer. New JIT has 4 registers to save, so prologue/epilogue are larger, but the cost is within noise on x64. Old JIT checks whether first insn clears A and if not emits 'xor %eax,%eax'. New JIT clears %rax unconditionally. 2. old BPF JIT doesn't support ANC_NLATTR, ANC_PAY_OFFSET, ANC_RANDOM extensions. New JIT supports all BPF extensions. Performance of such filters improves 2-4 times depending on a filter. The longer the filter the higher performance gain. Synthetic benchmarks with many ancillary loads see 20x speedup which seems to be the maximum gain from JIT Notes: . net.core.bpf_jit_enable=2 + tools/net/bpf_jit_disasm is still functional and can be used to see generated assembler . there are two jit_compile() functions and code flow for classic filters is: sk_attach_filter() - load classic BPF bpf_jit_compile() - try to JIT from classic BPF sk_convert_filter() - convert classic to internal bpf_int_jit_compile() - JIT from internal BPF seccomp and tracing filters will just call bpf_int_jit_compile() Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15rtnetlink: wait for unregistering devices in rtnl_link_unregister()Cong Wang1-0/+5
From: Cong Wang <cwang@twopensource.com> commit 50624c934db18ab90 (net: Delay default_device_exit_batch until no devices are unregistering) introduced rtnl_lock_unregistering() for default_device_exit_batch(). Same race could happen we when rmmod a driver which calls rtnl_link_unregister() as we call dev->destructor without rtnl lock. For long term, I think we should clean up the mess of netdev_run_todo() and net namespce exit code. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15ARM: vexpress: move HBI check to sysreg driverPawel Moll1-1/+0
The last reason for static memory mapping is the HBI (board identification number) check early in the machine code. Moving the check to the sysreg driver makes it possible to completely remove the early mapping and init functions. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: vexpress: Define the device as MFD cellsPawel Moll1-14/+2
This patch - finally, after over 6 months! :-( - addresses Samuel's request to split the vexpress-sysreg driver into smaller portions and define the device in a form of MFD cells: * LEDs code has been completely removed and replaced with "gpio-leds" nodes in the tree (referencing dedicated GPIO subnodes in sysreg - bindings documentation updated); this also better fits the reality as some variants of the motherboard don't have all the LEDs populated * syscfg bridge code has been extracted into a separate driver (placed in drivers/misc for no better place) * all the ID & MISC registers are defined as sysconf making them available for other drivers should they need to use them (and also to the user via /sys/kernel/debug/regmap which can be helpful in platform debugging) Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: syscon: Add platform data with a regmap config namePawel Moll1-0/+8
Define syscon platform data structure that can be used to define a regmap config name. This is particularly useful in the regmap debugfs when there is more than one syscon device registered, to distinguish the register blocks. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: vexpress: Convert custom func API to regmapPawel Moll1-60/+19
Components of the Versatile Express platform (configuration microcontrollers on motherboard and daughterboards in particular) talk to each other over a custom configuration bus. They provide miscellaneous functions (from clock generator control to energy sensors) which are represented as platform devices (and Device Tree nodes). The transactions on the bus can be generated by different "bridges" in the system, some of which are universal for the whole platform (for the price of high transfer latencies), others restricted to a subsystem (but much faster). Until now drivers for such functions were using custom "func" API, which is being replaced in this patch by regmap calls. This required: * a rework (and move to drivers/bus directory, as suggested by Samuel and Arnd) of the config bus core, which is much simpler now and uses device model infrastructure (class) to keep track of the bridges; non-DT case (soon to be retired anyway) is simply covered by a special device registration function * the new config-bus driver also takes over device population, so there is no need for special matching table for of_platform_populate nor "simple-bus" hack in the arm64 model dtsi file (relevant bindings documentation has been updated); this allows all the vexpress devices fit into normal device model, making it possible to remove plenty of early inits and other hacks in the near future * adaptation of the syscfg bridge implementation in the sysreg driver, again making it much simpler; there is a special case of the "energy" function spanning two registers, where they should be both defined in the tree now, but backward compatibility is maintained in the code * modification of the relevant drivers: * hwmon - just a straight-forward API change * power/reset driver - API change * regulator - API change plus error handling simplification * osc clock driver - this one required larger rework in order to turn in into a standard platform driver Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-15of: Keep track of populated platform devicesPawel Moll2-0/+12
In "Device Tree powered" systems, platform devices are usually massively populated with of_platform_populate() call, executed at some level of initcalls, either by generic architecture or by platform-specific code. There are situations though where certain devices must be created (and bound with drivers) before all the others. This presents a challenge, as devices created explicitly would be created again by of_platform_populate(). This patch tries to solve that issue in a generic way, adding a "populated" flag for a DT node description. Subsequent of_platform_populate() will skip such nodes (and its children) in a similar way to the non-available ones. This patch also adds of_platform_depopulate() as an operation complementary to the _populate() one. It removes a platform or an amba device populated from the Device Tree, together with its all children (leaving, however, devices without associated of_node untouched) clearing the "populated" flag on the way. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org>
2014-05-15tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasksSteven Rostedt (Red Hat)2-0/+13
Being able to show a cpumask of events can be useful as some events may affect only some CPUs. There is no standard way to record the cpumask and converting it to a string is rather expensive during the trace as traces happen in hotpaths. It would be better to record the raw event mask and be able to parse it at print time. The following macros were added for use with the TRACE_EVENT() macro: __bitmask() __assign_bitmask() __get_bitmask() To test this, I added this to the sched_migrate_task event, which looked like this: TRACE_EVENT(sched_migrate_task, TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus), TP_ARGS(p, dest_cpu, cpus), TP_STRUCT__entry( __array( char, comm, TASK_COMM_LEN ) __field( pid_t, pid ) __field( int, prio ) __field( int, orig_cpu ) __field( int, dest_cpu ) __bitmask( cpumask, num_possible_cpus() ) ), TP_fast_assign( memcpy(__entry->comm, p->comm, TASK_COMM_LEN); __entry->pid = p->pid; __entry->prio = p->prio; __entry->orig_cpu = task_cpu(p); __entry->dest_cpu = dest_cpu; __assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus()); ), TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s", __entry->comm, __entry->pid, __entry->prio, __entry->orig_cpu, __entry->dest_cpu, __get_bitmask(cpumask)) ); With the output of: ksmtuned-3613 [003] d..2 485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f migration/1-13 [001] d..5 485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f awk-3615 [002] d.H5 485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff migration/2-18 [002] d..5 485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home Suggested-by: Javi Merino <javi.merino@arm.com> Tested-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-15of: fix CONFIG_OF=n prototype of of_node_full_name()Stephen Rothwell1-1/+1
Make the CONFIG_OF=n prototpe of of_node_full_name() mateh the CONFIG_OF=y version. Fixes compile warnings like this: sound/soc/soc-core.c: In function 'soc_check_aux_dev': sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] codecname = of_node_full_name(aux_dev->codec_of_node); when CONFIG_OF is not defined. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-11-04 07:04:25 +0300