summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2006-05-15[PATCH] libata-eh: implement dev->eringTejun Heo1-0/+17
This patch implements ata_ering and uses it to define dev->ering. ata_ering is a ring buffer which records libata errors - whether a command was for normar IO request, err_mask and timestamp. Errors are recorded per-device in dev->ering. This will be used by EH to determine recovery actions. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh: add ATA and libata flags for new EHTejun Heo2-0/+21
Add ATA and libata flags to be used by new EH. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: update ata_scsi_error() for new EHTejun Heo1-0/+3
Update ata_scsi_error() for new EH. ata_scsi_error() is responsible for claiming timed out qcs and invoking ->error_handler in safe and synchronized manner. As the state of the controller is unknown if a qc has timed out, the port is frozen in such cases. Note that ata_scsi_timed_out() isn't used for new EH. This is because a timed out qc cannot be claimed by EH without freezing the port and freezing the port in ata_scsi_timed_out() results in unnecessary abortion of other active qcs. ata_scsi_timed_out() can be removed once all drivers are converted to new EH. While at it, add 'TODO: kill' comments to old EH functions. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: implement freeze/thawTejun Heo1-0/+4
Freezing is performed atomic w.r.t. host_set->lock and once frozen LLDD is not allowed to access the port or any qc on it. Also, libata makes sure that no new qc gets issued to a frozen port. A frozen port is thawed after a reset operation completes successfully, so reset methods must do its job while the port is frozen. During initialization all ports get frozen before requesting IRQ, so reset methods are always invoked on a frozen port. Optional ->freeze and ->thaw operations notify LLDD that the port is being frozen and thawed, respectively. LLDD can disable/enable hardware interrupt in these callbacks if the controller's IRQ mask can be changed dynamically. If the controller doesn't allow such operation, LLDD can check for frozen state in the interrupt handler and ack/clear interrupts unconditionally while frozen. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort()Tejun Heo1-0/+4
ata_port_schedule_eh() directly schedules EH for @ap without associated qc. Once EH scheduled, no further qc is allowed and EH kicks in as soon as all currently active qc's are drained. ata_port_abort() schedules all currently active commands for EH by qc_completing them with ATA_QCFLAG_FAILED set. If ata_port_abort() doesn't find any qc to abort, it directly schedule EH using ata_port_schedule_eh(). These two functions provide ways to invoke EH for conditions which aren't directly related to any specfic qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: implement new EH scheduling via error completionTejun Heo1-26/+1
There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: update ata_qc_from_tag() to enforce normal/EH qc ownershipTejun Heo1-2/+17
New EH framework has clear distinction about who owns a qc. Every qc starts owned by normal execution path - PIO, interrupt or whatever. When an exception condition occurs which affects the qc, the qc gets scheduled for EH. Note that some events (say, link lost and regained, command timeout) may schedule qc's which are not directly related but could have been affected for EH too. Scheduling for EH is atomic w.r.t. ap->host_set->lock and once schedule for EH, normal execution path is not allowed to access the qc in whatever way. (PIO synchronization acts a bit different and will be dealt with later) This patch make ata_qc_from_tag() check whether a qc is active and owned by normal path before returning it. If conditions don't match, NULL is returned and thus access to the qc is denied. __ata_qc_from_tag() is the original ata_qc_from_tag() and is used by libata core/EH layers to access inactive/failed qc's. This change is applied only if the associated LLDD implements new EH as indicated by non-NULL ->error_handler Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: use special reserved tag and qc for internal commandsTejun Heo1-1/+8
New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata-eh-fw: add flags and operations for new EHTejun Heo1-7/+20
Add ATA_FLAG_EH_{PENDING|FROZEN}, ATA_ATA_QCFLAG_{FAILED|SENSE_VALID} and ops->freeze, thaw, error_handler, post_internal_cmd() for new EH. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: implement ATA printk helpersTejun Heo1-0/+11
Implement ata_{port|dev}_printk() which prefixes the message with proper identification string. This change is necessary for later PM support because devices and links should be identified differently depending on how they are attached. This also helps unifying device id strings. Currently, there are two forms in use (P is the port number D device number) - 'ataP(D):', and 'ataP: dev D '. These macros also make it harder to forget proper ID string (e.g. printing only port number when a device is in question). Debug message handling can be integrated into these printk macros by passing debug type and level via @lv. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: use dev->apTejun Heo1-12/+9
Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: add dev->apTejun Heo1-0/+1
Add dev->ap which points back to the port the device belongs to. This makes it unnecessary to pass @ap for silly reasons (e.g. printks). Also, this change is necessary to accomodate later PM support which will introduce ATA link inbetween port and device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: kill old SCR functions and sata_dev_present()Tejun Heo1-22/+0
Kill now unused scr_{read|write|write_flush}() and sata_dev_present(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: implement new SCR handling and port on/offline functionsTejun Heo1-0/+6
Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: implement qc->result_tfTejun Heo1-2/+14
Add qc->result_tf and ATA_QCFLAG_RESULT_TF. This moves the responsibility of loading result TF from post-compltion path to qc execution path. qc->result_tf is loaded if explicitly requested or the qc failsa. This allows more efficient completion implementation and correct handling of result TF for controllers which don't have global TF representation such as sil3124/32. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: use preallocated buffersTejun Heo1-1/+3
It's not a very good idea to allocate memory during EH. Use statically allocated buffer for dev->id[] and add 512byte buffer ap->sector_buf. This buffer is owned by EH (or probing) and to be used as temporary buffer for various purposes (IDENTIFY, NCQ log page 10h, PM GSCR block). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: kill duplicate prototypesTejun Heo1-2/+0
Kill duplicate prototypes for ata_eh_qc_complete/retry() in libata.h. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: rename ata_down_sata_spd_limit() and friendsTejun Heo1-1/+1
Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[JFFS2] Don't pack on-medium structures, because GCC emits crappy codeDavid Woodhouse1-7/+7
If we use __attribute__((packed)), GCC will _also_ assume that the structures aren't sensibly aligned, and it'll emit code to cope with that instead of straight word load/save. This can be _very_ suboptimal on architectures like ARM. Ideally, we want an attribute which just tells GCC not to do any padding, without the alignment side-effects. In the absense of that, we'll just drop the 'packed' attribute and hope that everything stays as it was (which to be fair is fairly much what we expect). And add some paranoia checks in the initialisation code, which should be optimised away completely in the normal case. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-14[MTD] Clean up <linux/mtd/physmap.h> to fix modular buildDavid Woodhouse1-6/+2
... and also fix the multiple inclusion guard so it actually _works_ Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-14[MTD] Fix legacy character sets throughout drivers/mtd, include/linux/mtdDavid Woodhouse1-1/+1
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-13[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)KaiGai Kohei1-0/+40
This attached patches provide xattr support including POSIX-ACL and SELinux support on JFFS2 (version.5). There are some significant differences from previous version posted at last December. The biggest change is addition of EBS(Erase Block Summary) support. Currently, both kernel and usermode utility (sumtool) can recognize xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype. In addition, some bugs are fixed. - A potential race condition was fixed. - Unexpected fail when updating a xattr by same name/value pair was fixed. - A bug when removing xattr name/value pair was fixed. The fundamental structures (such as using two new nodetypes and exclusion mechanism by rwsem) are unchanged. But most of implementation were reviewed and updated if necessary. Espacially, we had to change several internal implementations related to load_xattr_datum() to avoid a potential race condition. [1/2] xattr_on_jffs2.kernel.version-5.patch [2/2] xattr_on_jffs2.utils.version-5.patch Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-13V4L/DVB (3774): Create V4L1 config optionsMauro Carvalho Chehab1-0/+5
V4L1 API is depreciated and should be removed soon from kernel. This patch adds two new options, one to disable V4L1 drivers, and another to disable V4L1 compat module. This way, it would be easy to check what still depends on V4L1 stuff, allowing also to test if app works fine with V4L2 only support. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-12Merge branch 'master'Steven Whitehouse21-99/+425
2006-05-12OneNAND: One-Time Programmable (OTP) supportKyungmin Park2-0/+10
One Block of the NAND Flash Array memory is reserved as a One-Time Programmable Block memory area. Also, 1st Block of NAND Flash Array can be used as OTP. The OTP block can be read, programmed and locked using the same operations as any other NAND Flash Array memory block. OTP block cannot be erased. OTP block is fully-guaranteed to be a valid block. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12OneNAND: handle byte access on BufferRAMKyungmin Park1-0/+3
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-0/+1
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: add locking to console write function [SERIAL] Remove unconditional enable of TX irq for console [SERIAL] 8250: set divisor register correctly for AMD Alchemy SoC uart [SERIAL] AMD Alchemy UART: claim memory range [SERIAL] Clean up serial locking when obtaining a reference to a port
2006-05-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-2/+1
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET_SCHED]: HFSC: fix thinko in hfsc_adjust_levels() [IPV6]: skb leakage in inet6_csk_xmit [BRIDGE]: Do sysfs registration inside rtnl. [NET]: Do sysfs registration as part of register_netdevice. [TG3]: Fix possible NULL deref in tg3_run_loopback(). [NET] linkwatch: Handle jiffies wrap-around [IRDA]: Switching to a workqueue for the SIR work [IRDA]: smsc-ircc: Minimal hotplug support. [IRDA]: Removing unused EXPORT_SYMBOLs [IRDA]: New maintainer. [NET]: Make netdev_chain a raw notifier. [IPV4]: ip_options_fragment() has no effect on fragmentation [NET]: Add missing operstates documentation.
2006-05-11Merge branch 'upstream' of ↵Linus Torvalds1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/shemminger/netdev-2.6 * 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/shemminger/netdev-2.6: sis900: phy for FoxCon motherboard dl2k: use DMA_48BIT_MASK constant phy: mdiobus_register(): initialize all phy_map entries sky2: ifdown kills irq mask
2006-05-11dl2k: use DMA_48BIT_MASK constantFrancois Romieu1-0/+1
Typo will be harder with this one. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-11[NET]: Do sysfs registration as part of register_netdevice.Stephen Hemminger1-2/+1
The last step of netdevice registration was being done by a delayed call, but because it was delayed, it was impossible to return any error code if the class_device registration failed. Side effects: * one state in registration process is unnecessary. * register_netdevice can sleep inside class_device registration/hotplug * code in netdev_run_todo only does unregistration so it is simpler. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-09[IA64] rework memory attribute aliasingBjorn Helgaas1-0/+1
This closes a couple holes in our attribute aliasing avoidance scheme: - The current kernel fails mmaps of some /dev/mem MMIO regions because they don't appear in the EFI memory map. This keeps X from working on the Intel Tiger box. - The current kernel allows UC mmap of the 0-1MB region of /sys/.../legacy_mem even when the chipset doesn't support UC access. This causes an MCA when starting X on HP rx7620 and rx8620 boxes in the default configuration. There's more detail in the Documentation/ia64/aliasing.txt file this adds, but the general idea is that if a region might be covered by a granule-sized kernel identity mapping, any access via /dev/mem or mmap must use the same attribute as the identity mapping. Otherwise, we fall back to using an attribute that is supported according to the EFI memory map, or to using UC if the EFI memory map doesn't mention the region. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-05-09sky2: backout NAPI rescheduleStephen Hemminger1-10/+8
This is a backout of earlier patch. The whole rescheduling hack was a bad idea. It doesn't really solve the problem and it makes the code more complicated for no good reason. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-09Finally remove the obnoxious inter_module_xxx()David Woodhouse1-9/+0
This was already a bad plan when I argued against adding it in the first place. Good riddance. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07[MTD] Convert physmap to platform driverLennert Buytenhek1-13/+8
After dwmw2 let me know it ought to be done, I rewrote the physmap map driver to be a platform driver. I know zilch about the driver model, so I probably botched it in some way, but I've done some tests on an ixp23xx board which uses physmap, and it all seems to work. In order to not break existing physmap users, I've added some compat code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN is defined and != 0. Also, I've changed the default value for CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently compile in physmap (or new, platform-style, users of physmap) don't get burned. This works pretty well -- the new physmap driver is a drop-in replacement for the old one, and works on said ixp23xx board without any code changes needed. (This should hold as long as users don't touch 'physmap_map' directly.) Once all physmap users have been converted to instantiate their own platform devices, the compat code can go. (Or we decide that we can change all the in-tree users at the same time, and never merge the compat code.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07[NET]: Create netdev attribute_groups with class_device_addStephen Hemminger1-0/+2
Atomically create attributes when class device is added. This avoids the race between registering class_device (which generates hotplug event), and the creation of attribute groups. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-07[CLASS DEVICE]: add attribute_group creationStephen Hemminger1-0/+2
Extend the support of attribute groups in class_device's to allow groups to be created as part of the registration process. This allows network device's to avoid race between registration and creating groups. Note that unlike attributes that are a property of the class object, the groups are a property of the class_device object. This is done because there are different types of network devices (wireless for example). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6David Woodhouse10-29/+290
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-05Merge branch 'merge' of ↵Linus Torvalds1-0/+60
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: Use the ibm,pa-features property if available powerpc: Fix incorrect might_sleep in __get_user/__put_user on kernel addresses [PATCH] ppc32 CPM_UART: fixes and improvements [PATCH] ppc32 CPM_UART: Fixed break send on SCC [PATCH] powerpc/kprobes: fix singlestep out-of-line [PATCH] powerpc/pseries: avoid crash in PCI code if mem system not up
2006-05-05Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds1-0/+1
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Move set_ios debugging into mmc.c [MMC] Correct mmc_request_done comments [MMC] PXA: reduce the number of lines PXAMCI debug uses [MMC] PXA and i.MX: don't avoid sending stop command on error [MMC] extend data timeout for writes [ARM] 3485/1: i.MX: MX1 SD/MMC fix of unintentional double start possibility
2006-05-04Merge branch 'splice' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds1-2/+3
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] compat_sys_vmsplice: one-off in UIO_MAXIOV check [PATCH] splice: redo page lookup if add_to_page_cache() returns -EEXIST [PATCH] splice: rename remaining info variables to pipe [PATCH] splice: LRU fixups [PATCH] splice: fix unlocking of page on error ->prepare_write()
2006-05-04Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>David Woodhouse1-20/+14
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-04Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> tooDavid Woodhouse1-87/+80
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-04Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>David Woodhouse1-1/+2
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-04Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>David Woodhouse1-35/+37
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-04Use __uXX types in <linux/divert.h> for struct divert_blk et al.David Woodhouse1-10/+10
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-04Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirelyDavid Woodhouse1-10/+4
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-04[NETFILTER]: H.323 helper: Change author's email addressJing Min Zhao1-1/+1
Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-04[PATCH] splice: LRU fixupsJens Axboe1-2/+3
Nick says that the current construct isn't safe. This goes back to the original, but sets PIPE_BUF_FLAG_LRU on user pages as well as they all seem to be on the LRU in the first place. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-05-04Use __uXX types in user-visible structures in <linux/nbd.h>David Woodhouse1-6/+6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>