summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2009-01-04power_supply: Add cold to the POWER_SUPPLY_HEALTH report valuesMark Brown1-0/+1
Some systems are able to report problems with batteries being under temperature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Refactor WM8350 chip identificationMark Brown1-0/+6
Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Switch WM8350 revision detection to a feature based modelMark Brown2-2/+2
Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04power_supply: Add support for WM8350 PMUMark Brown2-1/+48
This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: allow reading entire register banks on twl4030David Brownell1-2/+2
Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add AUXADC support for WM8350Mark Brown2-0/+10
The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8350 revision H supportMark Brown1-0/+1
No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04intel-iommu: fix build error with INTR_REMAP=y and DMAR=nIngo Molnar1-0/+8
dmar.o can be built in the CONFIG_INTR_REMAP=y case but iommu_calculate_agaw() is only available if VT-d is built as well. So create an inline version of iommu_calculate_agaw() for the !CONFIG_DMAR case. The iommu->agaw value wont be used in this case, but the code is cleaner (has less #ifdefs) if we have it around unconditionally. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-06ext4: Remove code to create the journal inodeTheodore Ts'o1-1/+0
This code has been obsolete in quite some time, since the supported method for adding a journal inode is to use tune2fs (or to creating new filesystem with a journal via mke2fs or mkfs.ext4). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-04HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVERHannes Eder1-0/+2
Impact: include a prototype for the exported function in the macro Fix about 20 of this warnings: drivers/hid/hid-a4tech.c:162:1: warning: symbol 'hid_compat_a4tech' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add dynids facilityJiri Slaby1-0/+5
Allow adding new devices to the hid drivers on the fly without a need of kernel recompilation. Now, one can test a driver e.g. by: echo 0003:045E:00F0.0003 > ../generic-usb/unbind echo 0003 045E 00F0 > new_id from some driver subdir. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: move usbhid flags to usbhid.hJiri Slaby1-9/+0
Move usbhid specific flags from global hid.h into local usbhid.h. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add phys and name ioctls to hidrawJiri Kosina1-0/+2
The hiddev interface provides ioctl() calls which can be used to obtain phys and raw name of the underlying device. Add the corresponding support also into hidraw. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-03Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds10-173/+153
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
2009-01-03Merge branch 'for-linus' of ↵Linus Torvalds5-168/+138
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu: (89 commits) AMD IOMMU: remove now unnecessary #ifdefs AMD IOMMU: prealloc_protection_domains should be static kvm/iommu: fix compile warning AMD IOMMU: add statistics about total number of map requests AMD IOMMU: add statistics about allocated io memory AMD IOMMU: add stats counter for domain tlb flushes AMD IOMMU: add stats counter for single iommu domain tlb flushes AMD IOMMU: add stats counter for cross-page request AMD IOMMU: add stats counter for free_coherent requests AMD IOMMU: add stats counter for alloc_coherent requests AMD IOMMU: add stats counter for unmap_sg requests AMD IOMMU: add stats counter for map_sg requests AMD IOMMU: add stats counter for unmap_single requests AMD IOMMU: add stats counter for map_single requests AMD IOMMU: add stats counter for completion wait events AMD IOMMU: add init code for statistic collection AMD IOMMU: add necessary header defines for stats counting AMD IOMMU: add Kconfig entry for statistic collection code AMD IOMMU: use dev_name in iommu_enable function AMD IOMMU: use calc_devid in prealloc_protection_domains ...
2009-01-03Merge branch 'for_linus' of ↵Linus Torvalds2-26/+52
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (34 commits) V4L/DVB (10173): Missing v4l2_prio_close in radio_release V4L/DVB (10172): add DVB_DEVICE_TYPE= to uevent V4L/DVB (10171): Use usb_set_intfdata V4L/DVB (10170): tuner-simple: prevent possible OOPS caused by divide by zero error V4L/DVB (10168): sms1xxx: fix inverted gpio for lna control on tiger r2 V4L/DVB (10167): sms1xxx: add support for inverted gpio V4L/DVB (10166): dvb frontend: stop using non-C99 compliant comments V4L/DVB (10165): Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2 V4L/DVB (10164): Add missing S2 caps flag to S2API V4L/DVB (10163): em28xx: allocate adev together with struct em28xx dev V4L/DVB (10162): tuner-simple: Fix tuner type set message V4L/DVB (10161): saa7134: fix autodetection for AVer TV GO 007 FM Plus V4L/DVB (10160): em28xx: update chip id for em2710 V4L/DVB (10157): Add USB ID for the Sil4701 radio from DealExtreme V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM Plus V4L/DVB (10155): Add TEA5764 radio driver V4L/DVB (10154): saa7134: fix a merge conflict on Behold H6 board V4L/DVB (10153): Add the Beholder H6 card to DVB-T part of sources. V4L/DVB (10152): Change configuration of the Beholder H6 card V4L/DVB (10151): Fix I2C bridge error in zl10353 ...
2009-01-03sparseirq: move set/get_timer_rand_state back to .cYinghai Lu1-50/+0
those two functions only used in that C file Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-03Merge branch 'for-linus' of ↵Linus Torvalds3-1/+18
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: warn about voltage mismatches mmc_spi: Add support for OpenFirmware bindings pxamci: fix dma_unmap_sg length mmc_block: ensure all sectors that do not have errors are read drivers/mmc: Move a dereference below a NULL test sdhci: handle built-in sdhci with modular leds class mmc: balanc pci_iomap with pci_iounmap mmc_block: print better error messages mmc: Add mmc_vddrange_to_ocrmask() helper function ricoh_mmc: Handle newer models of Ricoh controllers mmc: Add 8-bit bus width support sdhci: activate led support also when module mmc: trivial annotation of 'blocks' pci: use pci_ioremap_bar() in drivers/mmc sdricoh_cs: Add support for Bay Controller devices mmc: at91_mci: reorder timer setup and mmc_add_host() call
2009-01-03Merge branch 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds2-6/+8
* 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID [PATCH] improve idle cputime accounting [PATCH] improve precision of idle time detection. [PATCH] improve precision of process accounting. [PATCH] idle cputime accounting [PATCH] fix scaled & unscaled cputime accounting
2009-01-03Merge branch 'master' of ↵Mike Travis130-1070/+3166
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03add releasepage hooks to block devices which can be used by file systemsTheodore Ts'o1-0/+2
Implement blkdev_releasepage() to release the buffer_heads and pages after we release private data belonging to a mounted filesystem. Cc: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-03VT-d: remove now unused intel_iommu_found functionJoerg Roedel1-9/+0
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt domain iova_to_phys function for IOMMU APIJoerg Roedel1-2/+0
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt domain map and unmap functions for IOMMU APIJoerg Roedel1-4/+0
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt device attach and detach functions for IOMMU APIJoerg Roedel1-4/+0
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt domain init and destroy functions for IOMMU APIJoerg Roedel1-2/+0
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: change KVM to use IOMMU APIJoerg Roedel1-3/+3
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03introcude linux/iommu.h for an iommu apiJoerg Roedel1-0/+112
This patch introduces the API to abstract the exported VT-d functions for KVM into a generic API. This way the AMD IOMMU implementation can plug into this API later. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03Deassign device in kvm_free_assgined_deviceWeidong Han1-0/+1
In kvm_iommu_unmap_memslots(), assigned_dev_head is already empty. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: support device deassignmentWeidong Han1-0/+8
Support device deassignment, it can be used in device hotplug. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: use the new intel iommu APIsWeidong Han1-5/+10
intel iommu APIs are updated, use the new APIs. In addition, change kvm_iommu_map_guest() to just create the domain, let kvm_iommu_assign_device() assign device. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03Change intel iommu APIs of virtual machine domainWeidong Han1-9/+11
These APIs are used by KVM to use VT-d Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03calculate agaw for each iommuWeidong Han2-0/+2
"SAGAW" capability may be different across iommus. Use a default agaw, but if default agaw is not supported in some iommus, choose a less supported agaw. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03intel-iommu: move iommu_prepare_gfx_mapping() out of dma_remapping.hMark McLoughlin1-7/+0
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: kill off duplicate def of dmar_disabledMark McLoughlin1-1/+0
This is only used in dmar.c and intel-iommu.h, so dma_remapping.h seems like the appropriate place for it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move struct device_domain_info out of dma_remapping.hMark McLoughlin1-10/+0
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move struct dmar_domain def out dma_remapping.hMark McLoughlin1-20/+2
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move DMA PTE defs out of dma_remapping.hMark McLoughlin1-22/+0
DMA_PTE_READ/WRITE are needed by kvm. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move context entry defs out from dma_remapping.hMark McLoughlin1-38/+0
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move root entry defs from dma_remapping.hMark McLoughlin1-33/+1
We keep the struct root_entry forward declaration for the pointer in struct intel_iommu. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move DMA_32/64BIT_PFN into intel-iommu.cMark McLoughlin1-5/+0
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: make init_dmars() staticMark McLoughlin1-1/+0
init_dmars() is not used outside of drivers/pci/intel-iommu.c Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: remove some unused struct intel_iommu fieldsMark McLoughlin1-5/+0
The seg, saved_msg and sysdev fields appear to be unused since before the code was first merged. linux/msi.h is not needed in linux/intel-iommu.h anymore since there is no longer a reference to struct msi_msg. The MSI code in drivers/pci/intel-iommu.c still has linux/msi.h included via linux/dmar.h. linux/sysdev.h isn't needed because there is no reference to struct sys_device. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-02Disallow gcc versions 3.{0,1}Ingo Molnar1-0/+4
GCC 3.0 and 3.1 are too old to build a working kernel. Signed-off-by: Ingo Molnar <mingo@elte.hu> [ This check got dropped as obsolete when I simplified the gcc header inclusion mess in f153b82121b0366fe0e5f9553545cce237335175, but Willy Tarreau reports actually having those old versions still.. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds6-61/+146
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02Merge branch 'kvm-updates/2.6.29' of ↵Linus Torvalds2-3/+27
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (140 commits) KVM: MMU: handle large host sptes on invlpg/resync KVM: Add locking to virtual i8259 interrupt controller KVM: MMU: Don't treat a global pte as such if cr4.pge is cleared MAINTAINERS: Maintainership changes for kvm/ia64 KVM: ia64: Fix kvm_arch_vcpu_ioctl_[gs]et_regs() KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMI KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchip KVM: fix handling of ACK from shared guest IRQ KVM: MMU: check for present pdptr shadow page in walk_shadow KVM: Consolidate userspace memory capability reporting into common code KVM: Advertise the bug in memory region destruction as fixed KVM: use cpumask_var_t for cpus_hardware_enabled KVM: use modern cpumask primitives, no cpumask_t on stack KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus KVM: set owner of cpu and vm file operations anon_inodes: use fops->owner for module refcount x86: KVM guest: kvm_get_tsc_khz: return khz, not lpj KVM: MMU: prepopulate the shadow on invlpg KVM: MMU: skip global pgtables on sync due to cr3 switch KVM: MMU: collapse remote TLB flushes on root sync ...
2009-01-02V4L/DVB (10166): dvb frontend: stop using non-C99 compliant commentsMauro Carvalho Chehab1-14/+14
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10164): Add missing S2 caps flag to S2APIKlaus Schmidinger1-0/+1
The attached patch adds a capability flag that allows an application to determine whether a particular device can handle "second generation modulation" transponders. This is necessary in order for applications to be able to decide which device to use for a given channel in a multi device environment, where DVB-S and DVB-S2 devices are mixed. It is assumed that a device capable of handling "second generation modulation" can implicitly handle "first generation modulation". The flag is not named anything with DVBS2 in order to allow its use with future DVBT2 devices as well (should they ever come). Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil1-13/+38
instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds1-56/+65
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (32 commits) ide-atapi: start dma in a drive-specific way ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc ide-atapi: remove timeout arg to ide_issue_pc ide-cd: remove handler wrappers ide-cd: remove xferlen arg to cdrom_start_packet_command ide-atapi: split drive-specific functionality in ide_issue_pc ide-atapi: assign expiry and timeout based on device type ide-atapi: compute cmd_len based on device type in ide_transfer_pc ide: remove the last ide-scsi remnants ide-atapi: remove ide-scsi remnants from ide_pc_intr() ide-atapi: remove ide-scsi remnants from ide_transfer_pc() ide-atapi: remove ide-scsi remnants from ide_issue_pc ide-cd: move cdrom_timer_expiry to ide-atapi.c ide-atapi: teach ide atapi about drive->waiting_for_dma ide-atapi: accomodate transfer length calculation for ide-cd ide-atapi: setup dma for ide-cd ide-atapi: combine drive-specific assignments ide-atapi: add a dev_is_idecd-inline remove ide-scsi ide-floppy: allocate only toplevel packet commands ...