summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2009-03-25USB: make transfer_buffer_lengths in struct urb field u32Greg Kroah-Hartman1-1/+1
Roel Kluin pointed out that transfer_buffer_lengths in struct urb was declared as an 'int'. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25USB: allow libusb to talk to unauthenticated WUSB devicesDavid Vrabel1-1/+1
To permit a userspace application to associate with WUSB devices using numeric association, control transfers to unauthenticated WUSB devices must be allowed. This requires that wusbcore correctly sets the device state to UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be performed to UNAUTHENTICATED devices. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25usb-storage: prepare for subdriver separationAlan Stern1-17/+4
This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25USB: otg: adding nop usb transceiverAjay Kumar Gupta1-0/+4
NOP transceiver is used by all the usb transceiver which are mostly autonomous and doesn't require any programming or which are built into the usb ip itself.NOP transceiver only allocates the memory for struct xceiv and calls otg_set_transceiver() so function call to otg_get_transceiver() will return a valid transceiver. NOP transceiver device should be registered by calling usb_nop_xceiv_register() from platform files. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25USB: serial: introduce a flag into the usb serial layer to tell drivers that ↵Oliver Neukum1-1/+2
their URBs are killed due to suspension This patch introduces a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension. That is necessary to let drivers know whether they should report an error back. Signed-off-by: Oliver Neukum <oneukum@suse.de> Hi Greg, this is for 2.6.30. Patches to use this in drivers are under development. Regards Oliver
2009-03-25USB: Move definitions from usb.h to usb/ch9.hJulia Lawall2-180/+179
The functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) are moved from include/linux/usb.h to include/linux/usb/ch9.h. include/linux/usb/ch9.h makes more sense for these functions because they only depend on constants that are defined in this file. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25USB: gpio_vbus: add delayed vbus_session callsRobert Jarzmik2-2/+8
Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25USB: add quirk to avoid config and interface stringsAlan Stern1-0/+3
Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by: Melchior FRANZ <melchior.franz@gmail.com> Tested-by: Melchior FRANZ <melchior.franz@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.28 and 2.6.29, nothing earlier] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25ide: use try_to_identify() in ide_driveid_update()Bartlomiej Zolnierkiewicz1-0/+2
* Pass pointer to buffer for IDENTIFY data to do_identify() and try_to_identify(). * Un-static try_to_identify() and use it in ide_driveid_update(). * Rename try_to_identify() to ide_dev_read_id(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: remove broken EXABYTENEST supportBartlomiej Zolnierkiewicz1-2/+0
do_identify() marks EXABYTENEST device as non-present and frees drive->id so enable_nest() has absolutely no chance of working. The code was like this since at least 2.6.12-rc2 and nobody has noticed so just remove broken EXABYTENEST support. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25mn10300: remove <asm/ide.h>Bartlomiej Zolnierkiewicz1-3/+2
* Remove superfluous <asm/intctl-regs.h> include. * Remove no longer used SUPPORT_SLOW_DATA_PORTS define. * Move defining SUPPORT_VLB_SYNC to <linux/ide.h>. * Use __ide_mm_*() macros from <asm-generic/ide_iops.h> (MN10300 uses only memory-mapped I/O). * Remove <asm/ide.h>. While at it: * Remove superfluous SPARC64 #ifdef from <linux/ide.h>. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25frv: remove <asm/ide.h>Bartlomiej Zolnierkiewicz1-2/+2
* Remove superfluous <asm/{setup,io,irq}.h> includes. * Remove <asm/ide.h>. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: remove pciirq argument from ide_pci_setup_ports()Bartlomiej Zolnierkiewicz1-1/+1
* Set ->irq explicitly in cs5520.c. * Remove irq argument from ide_hw_configure(). * Remove pciirq argument from ide_pci_setup_ports(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: fix ->init_chipset method to return 'int' valueBartlomiej Zolnierkiewicz1-2/+2
* Return 0 instead of dev->irq in ->init_chipset implementations. * Fix ->init_chipset method to return 'int' value instead of 'unsigned int' one. This fixes ->init_chipset handling for host drivers (cs5530, hpt366 and pdc202xx_new) for which it is possible for this method to fail. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: remove no longer needed IRQ fallback code from hwif_init()Bartlomiej Zolnierkiewicz1-15/+0
Then remove no longer used __ide_default_irq(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: remove no longer needed IDE_HFLAG[_FORCE]_LEGACY_IRQSBartlomiej Zolnierkiewicz1-4/+0
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move error handling code to ide-eh.c (v2)Bartlomiej Zolnierkiewicz1-5/+8
Do some CodingStyle fixups in <linux/ide.h> while at it. v2: Add missing <linux/delay.h> include (reported by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move xfer mode tuning code to ide-xfer-mode.cBartlomiej Zolnierkiewicz1-5/+7
* Move xfer mode tuning code to ide-xfer-mode.c. * Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers that support xfer mode tuning. * Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio() and ide_set_xfer_rate(). * Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE, also add explicit selects for few host drivers that need it. * Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move device settings code to ide-devsets.cBartlomiej Zolnierkiewicz1-0/+1
Remove stale comment from ide.c while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move ide_do_park_unpark() to ide-park.cBartlomiej Zolnierkiewicz1-0/+2
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: remove ide_do_drive_cmd()Bartlomiej Zolnierkiewicz1-2/+0
* Use elv_add_request() instead of __elv_add_request() in ide_do_drive_cmd(). * ide_do_drive_cmd() is used only in ide-{atapi,cd}.c so inline it there. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move ide_dma_timeout_retry() to ide-dma.cBartlomiej Zolnierkiewicz1-0/+2
Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move drive_is_ready() to ide-io.cBartlomiej Zolnierkiewicz1-2/+0
Move drive_is_ready() to ide-io.c, then make it static. Also make some minor CodingStyle fixups while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: sanitize ACPI initializationBartlomiej Zolnierkiewicz1-2/+4
* ide_acpi_init() -> ide_acpi_init_port() * ide_acpi_blacklist() -> ide_acpi_init() * Call ide_acpi_init() only once (do it during IDE core initialization) and cleanup the function accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: add ide_for_each_present_dev() iteratorBartlomiej Zolnierkiewicz1-0/+4
* Add ide_for_each_present_dev() iterator and convert IDE code to use it. * Do some drive-by CodingStyle fixups in ide-acpi.c while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move ide_pktcmd_tf_load() to ide-atapi.cBartlomiej Zolnierkiewicz1-2/+0
Then make it static and remove 'dma' argument. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24Merge branch 'master' of ↵David S. Miller9-15/+58
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2009-03-24firewire: cdev: add closure to async stream ioctlStefan Richter1-15/+16
This changes the as yet unreleased FW_CDEV_IOC_SEND_STREAM_PACKET ioctl to generate an fw_cdev_event_response event just like the other two ioctls for asynchronous request transmission do. This way, clients get feedback on successful or unsuccessful transmission. This also adds input validation for length, tag, channel, sy, speed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: secure add_descriptor ioctlStefan Richter1-1/+4
The access permissions and ownership or ACL of /dev/fw* character device files will typically be set based on the device type of the respective nodes, as obtained by firewire-core from descriptors in the device's configuration ROM. An example policy is to deny write permission by default but grant write permission to files of AV/C video and audio devices and IIDC video devices. The FW_CDEV_IOC_ADD_DESCRIPTOR ioctl could be used to partly subvert such a policy: Find a device file with relaxed permissions, use the ioctl to add a descriptor with AV/C marker to the local node's ROM, thus gain access to the local node's character device file. (This is only possible if there are udev scripts installed which actively relax permissions for known device types and if there is a device of such a type connected.) Accessibility of the local node's device file is relevant to host security if the host contains two or more IEEE 1394 link layer controllers which are plugged into a single bus. Therefore change the ABI to deny FW_CDEV_IOC_ADD_DESCRIPTOR if the file belongs to a remote node. (This change has no impact on known implementers of the ABI: None of them uses the ioctl yet.) Also clarify the documentation: The ioctl affects all local nodes, not just one local node. Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: amendment to "add ioctl to query maximum transmission speed"Stefan Richter1-23/+14
The as yet unreleased FW_CDEV_IOC_GET_SPEED ioctl puts only a single integer into the parameter buffer. We can use ioctl()'s return value instead. (Also: Some whitespace change in firewire-cdev.h.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: implement asynchronous stream transmissionJay Fenlason1-0/+27
Allow userspace and other firewire drivers (fw-ipv4 I'm looking at you!) to send Asynchronous Transmit Streams as described in 7.8.3 of release 1.1 of the 1394 Open Host Controller Interface Specification. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (tweaks)
2009-03-24firewire: cdev: add ioctls for iso resource management, amendmentStefan Richter1-6/+4
Some fixes: - Remove stale documentation. - Fix a != vs. == thinko that got in the way of channel management. - Try bandwidth deallocation even if channel deallocation failed. A simplification: - fw_cdev_allocate_iso_resource.channels is now ordered like libdc1394's dc1394_iso_allocate_channel() channels_allowed argument. By the way, I looked closer at cards from NEC, TI, and VIA, and noticed that they all don't implement IEEE 1394a behaviour which is meant to deviate from IEEE 1212's notion of lock compare-swap. This means that we have to do two lock transactions instead of one in many cases where one transaction would already succeed on a fully 1394a compliant IRM. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: increment fw_cdev_version, update documentationStefan Richter1-5/+30
Necessary due to Date: Tue, 22 Jul 2008 23:23:40 -0700 From: David Moore <dcm@acm.org> Subject: firewire: Include iso timestamp in headers when header_size > 4 Side note: The lack of upwards compatibility sounds worse than it is. All existing client implementations, libraw1394 and libdc1394, set header_size = 4. And since the ABI v1 behaviour does not offer any advantages over the new behaviour, we deliberately do not provide the old behaviour anymore. Also add documentation about the format of fw_cdev_get_cycle_timer which may be used in conjunction with the timestamp of iso packets but has a different format. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctl for broadcast write requestsJay Fenlason, Stefan Richter1-0/+1
Write transactions to the broadcast node ID are a convenient way to trigger functions of multiple nodes at once. IIDC is a protocol which can make use of this if multiple cameras with same command_regs_base are connected at the same bus. Based on Date: Wed, 10 Sep 2008 11:32:16 -0400 From: Jay Fenlason <fenlason@redhat.com> Subject: [patch] SEND_BROADCAST_REQUEST Changes: ioctl_send_request() and ioctl_send_broadcast_request() now share code. Broadcast speed corrected to S100. Check for proper tcode. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctl to query maximum transmission speedStefan Richter1-0/+10
While the speed of asynchronous transactions is automatically chosen by the kernel, the speed of isochronous streams has to be chosen by the initiating client. In case of 1394a bus topologies, the maximum possible speed could be figured out with some effort by evaluation of the remote node's link speed field in the config ROM, the local node's link speed field, and the PHY speeds and topologic information in the local node's or IRM's topology map CSR. However, this does not work in case of 1394b buses. Hence add an ioctl to export the maximum speed which the kernel already determined. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctls for manual iso resource managementStefan Richter1-10/+32
This adds ioctls for allocation and deallocation of a channel or/and bandwidth without auto-reallocation and without auto-deallocation. The benefit of these ioctls is that libraw1394-style isochronous resource management can be implemented without write access to the IRM's character device file. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctls for isochronous resource managementJay Fenlason, Stefan Richter1-13/+87
Based on Date: Tue, 18 Nov 2008 11:41:27 -0500 From: Jay Fenlason <fenlason@redhat.com> Subject: [Patch V4] Add ISO resource management support with several changes to the ABI and implementation. Only the part of the ABI which enables auto-reallocation and auto-deallocation is included here. This implements ioctls for kernel-assisted allocation of isochronous channels and isochronous bandwidth. The benefits are: - The client does not have to have write access to the /dev/fw* device corresponding to the IRM. - The client does not have to perform reallocation after bus resets. - Channel and bandwidth are deallocated by the kernel if the file is closed before the client deallocated the resources. Thus resources are released even if the client crashes. It is anticipated that future in-kernel code (firewire-core IRM code; the firewire port of firedtv), will use the fw-iso.c portions of this code too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: David Moore <dcm@acm.org>
2009-03-24firewire: cdev: fix documentation of FW_CDEV_IOC_GET_INFOStefan Richter1-1/+1
The FW_CDEV_IOC_GET_INFO ioctl looks at client->device->config_rom, not at the local node's config ROM. We could fix the implementation or the documentation. I believe the way how it is currently implemented is more useful than the way how it is currently documented. In fact, libdc1394 uses the ABI already as implemented, not as documented. Hence let's change the documentation. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: documentation fixletStefan Richter1-1/+1
Reported-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24genirq: provide old request_irq() for CONFIG_GENERIC_HARDIRQ=nThomas Gleixner1-1/+6
Impact: Undo compile breakage for archs with CONFIG_GENERIC_HARDIRQ=n The threaded interrupt handler patches changed request_irq from extern to inline. Architectures which do not use the generic irq code still have request_irq() as a global function and therefor fail to compile. Keep the extern declaration for CONFIG_GENERIC_HARDIRQ=n Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24tracing: use union for multi-usages fieldLai Jiangshan1-3/+9
Impact: cleanup struct dyn_ftrace::ip has different usages in his lifecycle, we use union for it. And also for struct dyn_ftrace::flags. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49C871BE.3080405@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24Merge branches 'x86/apic', 'x86/cleanups', 'x86/mm', 'x86/pat', 'x86/setup' ↵Ingo Molnar1-0/+20
and 'x86/signal'; commit 'v2.6.29' into x86/core
2009-03-24function-graph: ignore times across scheduleSteven Rostedt1-0/+2
Impact: more accurate timings The current method of function graph tracing does not take into account the time spent when a task is not running. This shows functions that call schedule have increased costs: 3) + 18.664 us | } ------------------------------------------ 3) <idle>-0 => kblockd-123 ------------------------------------------ 3) | finish_task_switch() { 3) 1.441 us | _spin_unlock_irq(); 3) 3.966 us | } 3) ! 2959.433 us | } 3) ! 2961.465 us | } This patch uses the tracepoint in the scheduling context switch to account for time that has elapsed while a task is scheduled out. Now we see: ------------------------------------------ 3) <idle>-0 => edac-po-1067 ------------------------------------------ 3) | finish_task_switch() { 3) 0.685 us | _spin_unlock_irq(); 3) 2.331 us | } 3) + 41.439 us | } 3) + 42.663 us | } Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24function-graph: moved the timestamp from arch to generic codeSteven Rostedt1-2/+1
This patch move the timestamp from happening in the arch specific code into the general code. This allows for better control by the tracer to time manipulation. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24bsg: add support for tail queuingBoaz Harrosh1-0/+8
Currently inherited from sg.c bsg will submit asynchronous request at the head-of-the-queue, (using "at_head" set in the call to blk_execute_rq_nowait()). This is bad in situation where the queues are full, requests will execute out of order, and can cause starvation of the first submitted requests. The sg_io_v4->flags member is used and a bit is allocated to denote the Q_AT_TAIL. Zero is to queue at_head as before, to be compatible with old code at the write/read path. SG_IO code path behavior was changed so to be the same as write/read behavior. SG_IO was very rarely used and breaking compatibility with it is OK at this stage. sg_io_hdr at sg.h also has a flags member and uses 3 bits from the first nibble and one bit from the last nibble. Even though none of these bits are supported by bsg, The second nibble is allocated for use by bsg. Just in case. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> CC: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24block: genhd.h cleanup patchPetros Koutoupis1-2/+1
In include/linux/genhd.h: Line 335 has a comment that needs to be updated from: /* drivers/block/ll_rw_blk.c */ to /* block/blk-core.c */. Also as of kernel 2.6.16, the function definition for get_blkdev_list was removed from block/genhd.c but the function declaration is still present on line 339. This patch addresses both those fixes, by updating the comment and removing the declaration. Signed-off-by: Petros Koutoupis <pkoutoupis@hydrasystemsllc.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24block: add private bio_set for bio integrity allocationsMartin K. Petersen1-14/+4
The integrity bio allocation needs its own bio_set to avoid violating the mempool allocation rules and risking deadlocks. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24block: genhd.h comment needs updatingPetros Koutoupis1-1/+1
The include/linux/genhd.h file, on line 338-352 declares some function prototypes in which the comment on line 338 states that the definition of these prototypes are to be found at drivers/block/genhd.c. The problem is that genhd.c has been relocated to block/genhd.c. See attached patch to correct this minor cosmetic typo. Signed-off-by: Petros Koutoupis <pkoutoupis@hydrasystemsllc.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24GFS2: Merge lock_dlm module into GFS2Steven Whitehouse1-277/+0
This is the big patch that I've been working on for some time now. There are many reasons for wanting to make this change such as: o Reducing overhead by eliminating duplicated fields between structures o Simplifcation of the code (reduces the code size by a fair bit) o The locking interface is now the DLM interface itself as proposed some time ago. o Fewer lookups of glocks when processing replies from the DLM o Fewer memory allocations/deallocations for each glock o Scope to do further optimisations in the future (but this patch is more than big enough for now!) Please note that (a) this patch relates to the lock_dlm module and not the DLM itself, that is still a separate module; and (b) that we retain the ability to build GFS2 as a standalone single node filesystem with out requiring the DLM. This patch needs a lot of testing, hence my keeping it I restarted my -git tree after the last merge window. That way, this has the maximum exposure before its merged. This is (modulo a few minor bug fixes) the same patch that I've been posting on and off the the last three months and its passed a number of different tests so far. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-03-24genirq: threaded irq handlers review fixupsThomas Gleixner1-0/+2
Delta patch to address the review comments. - Implement warning when IRQ_WAKE_THREAD is requested and no thread handler installed - coding style fixes Pointed-out-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>