summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2009-05-30Merge branches 'bugzilla-13121+', 'bugzilla-13233', ↵Len Brown1-10/+10
'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - better handle bad scheduler decisions Input: usb1400_ts - fix access to "device data" in resume function Input: multitouch - augment event semantics documentation Input: multitouch - add tracking ID to the protocol
2009-05-29memcg: fix deadlock between lock_page_cgroup and mapping tree_lockDaisuke Nishimura1-0/+5
mapping->tree_lock can be acquired from interrupt context. Then, following dead lock can occur. Assume "A" as a page. CPU0: lock_page_cgroup(A) interrupted -> take mapping->tree_lock. CPU1: take mapping->tree_lock -> lock_page_cgroup(A) This patch tries to fix above deadlock by moving memcg's hook to out of mapping->tree_lock. charge/uncharge of pagecache/swapcache is protected by page lock, not tree_lock. After this patch, lock_page_cgroup() is not called under mapping->tree_lock. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29cred: #include init.h in cred.hAlexey Dobriyan1-0/+1
linux/cred.h can't be included as first header (alphabetical order) because it uses __init which is enough to break compilation on some archs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29perf_counter: Ammend cleanup in fork() failPeter Zijlstra1-0/+2
When fork() fails we cannot use perf_counter_exit_task() since that assumes to operate on current. Write a new helper that cleans up unused/clean contexts. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29bonding: allow bond in mode balance-alb to work properly in bridge -try4.3Jiri Pirko1-0/+18
[PATCH net-next] bonding: allow bond in mode balance-alb to work properly in bridge -try4.3 (updated) changes v4.2 -> v4.3 - memcpy the address always, not just in case it differs from master->dev_addr - compare_ether_addr_64bits() is not used so there is no direct need to make new header file (I think it would be good to have bond stuff in separate file anyway). changes v4.1 -> v4.2 - use skb->pkt_type == PACKET_HOST compare rather then comparing skb dest addr against skb->dev->dev_addr The problem is described in following bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=487763 Basically here's what's going on. In every mode, bonding interface uses the same mac address for all enslaved devices (except fail_over_mac). Only balance-alb will simultaneously use multiple MAC addresses across different slaves. When you put this kind of bond device into a bridge it will only add one of mac adresses into a hash list of mac addresses, say X. This mac address is marked as local. But this bonding interface also has mac address Y. Now then packet arrives with destination address Y, this address is not marked as local and the packed looks like it needs to be forwarded. This packet is then lost which is wrong. Notice that interfaces can be added and removed from bond while it is in bridge. *** When the multiple addresses for bridge port approach failed to solve this issue due to STP I started to think other way to solve this. I returned to previous solution but tweaked one. This patch solves the situation in the bonding without touching bridge code. For every incoming frame to bonding the destination address is compared to current address of the slave device from which tha packet came. If these two match destination address is replaced by mac address of the master. This address is known by bridge so it is delivered properly. Note that the comparsion is not made directly, it's used skb->pkt_type == PACKET_HOST instead. This is "set" previously in eth_type_trans(). I experimentally tried that this works as good as searching through the slave list (v4 of this patch). Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29Merge branch 'linux-2.6.31.y' of ↵David S. Miller1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2009-05-29Merge branch 'merge' into nextBenjamin Herrenschmidt4-3/+29
2009-05-29wimax: a new API call was added, increment minor protocol version numberInaky Perez-Gonzalez1-1/+1
As the 'state_get' API call was added, we need to increase the minor protocol version number so applications that depend on the can check it's presence. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-29wimax: Add netlink interface to get device statePaulius Zaleckas1-0/+5
wimax connection manager / daemon has to know what is current state of the device. Previously it was only possible to get notification whet state has changed. Note: By mistake, the new generic netlink's number for WIMAX_GNL_OP_STATE_GET was declared inserting into the existing list of API calls, not appending; thus, it'd break existing API. Fixed by Inaky Perez-Gonzalez <inaky@linux.intel.com> by moving to the tail, where we add to the interface, not modify the interface. Thanks to Stephen Hemminger <shemminger@vyatta.com> for catching this. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-05-29i7300_idle: allow testing on i5000-series hardware w/o re-compileLen Brown1-10/+10
Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-05-28perf_counter: Fix race in attaching counters to tasks and exitingPaul Mackerras1-2/+3
Commit 564c2b21 ("perf_counter: Optimize context switch between identical inherited contexts") introduced a race where it is possible that a counter being attached to a task could get attached to the wrong task, if the task is one that has inherited its context from another task via fork. This happens because the optimized context switch could switch the context to another task after find_get_context has read task->perf_counter_ctxp. In fact, it's possible that the context could then get freed, if the other task then exits. This fixes the problem by protecting both the context switch and the critical code in find_get_context with spinlocks. The context switch locks the cxt->lock of both the outgoing and incoming contexts before swapping them. That means that once code such as find_get_context has obtained the spinlock for the context associated with a task, the context can't get swapped to another task. However, the context may have been swapped in the interval between reading task->perf_counter_ctxp and getting the lock, so it is necessary to check and retry. To make sure that none of the contexts being looked at in find_get_context can get freed, this changes the context freeing code to use RCU. Thus an rcu_read_lock() is sufficient to ensure that no contexts can get freed. This part of the patch is lifted from a patch posted by Peter Zijlstra. This also adds a check to make sure that we can't add a counter to a task that is exiting. There is also a race between perf_counter_exit_task and find_get_context; this solves the race by moving the get_ctx that was in perf_counter_alloc into the locked region in find_get_context, so that once find_get_context has got the context for a task, it won't get freed even if the task calls perf_counter_exit_task. It doesn't matter if new top-level (non-inherited) counters get attached to the context after perf_counter_exit_task has detached the context from the task. They will just stay there and never get scheduled in until the counters' fds get closed, and then perf_release will remove them from the context and eventually free the context. With this, we are now doing the unclone in find_get_context rather than when a counter was added to or removed from a context (actually, we were missing the unclone_ctx() call when adding a counter to a context). We don't need to unclone when removing a counter from a context because we have no way to remove a counter from a cloned context. This also takes out the smp_wmb() in find_get_context, which Peter Zijlstra pointed out was unnecessary because the cmpxchg implies a full barrier anyway. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <18974.33033.667187.273886@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-28perf_counter: Fix perf_counter_init_task() on !CONFIG_PERF_COUNTERSIngo Molnar1-1/+1
Pointed out by compiler warnings: tip/include/linux/perf_counter.h:644: warning: no return statement in function returning non-void Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-28Merge branch 'master' of ↵David S. Miller1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-05-28net: correct a comment for the final #endifJiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28net: ALIGN/PTR_ALIGN cleanup in alloc_netdev_mq()/netdev_priv()Eric Dumazet1-4/+1
Use ALIGN() and PTR_ALIGN() macros instead of handcoding them. Get rid of NETDEV_ALIGN_CONST ugly define Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28mlx4_core: Add module parameter for number of MTTs per segmentEli Cohen1-0/+1
The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27knfsd: reply cache cleanupsGreg Banks1-2/+1
Make REQHASH() an inline function. Rename hash_list to cache_hash. Fix an obsolete comment. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-27netfilter: conntrack: add support for DCCP handshake sequence to ctnetlinkPablo Neira Ayuso1-0/+1
This patch adds CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ that exposes the u64 handshake sequence number to user-space. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-27Input: ucb1400 - move static function from header into coreSebastian Andrzej Siewior1-19/+4
it's a little too large for static line. The ts is currently the only mainline user but Marek Vasut claims that there is a battery driver in an ARM tree which also needs this function. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-27gro: Avoid unnecessary comparison after skb_gro_headerHerbert Xu1-9/+14
For the overwhelming majority of cases, skb_gro_header's return value cannot be NULL. Yet we must check it because of its current form. This patch splits it up into multiple functions in order to avoid this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27gro: Optimise length comparison in skb_gro_headerHerbert Xu1-2/+5
By caching frag0_len, we can avoid checking both frag0 and the length separately in skb_gro_header. This helps as skb_gro_header is called four times per packet which amounts to a few million times at 10Gb/s. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27gro: Only use skb_gro_header for completely non-linear packetsHerbert Xu1-5/+6
Currently skb_gro_header is used for packets which put the hardware header in skb->data with the rest in frags. Since the drivers that need this optimisation all provide completely non-linear packets, we can gain extra optimisations by only performing the frag0 optimisation for completely non-linear packets. In particular, we can simply test frag0 (instead of skb_headlen) to see whether the optimisation is in force. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27gro: Inline skb_gro_header and cache frag0 virtual addressHerbert Xu1-7/+15
The function skb_gro_header is called four times per packet which quickly adds up at 10Gb/s. This patch inlines it to allow better optimisations. Some architectures perform multiplication for page_address, which is done by each skb_gro_header invocation. This patch caches that value in skb->cb to avoid the unnecessary multiplications. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27phy: Eliminate references to BUS_ID_SIZE.David S. Miller1-2/+2
Just use the constant 20 to keep things working. If someone is so motivated, this can be converted over to dynamic strings. I tried and it's a lot of work. But for now this is good enough. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26tracing: add __print_symbolic to trace eventsSteven Rostedt1-0/+3
This patch adds __print_symbolic which is similar to __print_flags but works for an enumeration type instead. That is, there is only a one to one mapping between the values and the symbols. When a match is made, then it is printed, otherwise the hex value is outputed. [ Impact: add interface for showing symbol names in events ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26tracing: add __print_flags for eventsSteven Rostedt1-1/+12
Developers have been asking for the ability in the ftrace event tracer to display names of bits in a flags variable. Instead of printing out c2, it would be easier to read FOO|BAR|GOO, assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7. Some examples where this would be useful are the state flags in a context switch, kmalloc flags, and even permision flags in accessing files. [ v2 changes include: Frederic Weisbecker's idea of using a mask instead of bits, thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS. Li Zefan's idea of allowing the caller of __print_flags to add their own delimiter (or no delimiter) where we can get for file permissions rwx instead of r|w|x. ] [ v3 changes: Christoph Hellwig's idea of using an array instead of va_args. ] [ Impact: better displaying of flags in trace output ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26[MTD] Remove option for add_mtd_partitions() to not register partitions.David Woodhouse1-1/+0
This breaks the dilnetpc map driver, but it could be fixed not to use that option. We want to simplify the partition handling, and this is a step towards that. Remove superfluous 'index' field from private struct mtd_part too, while we're at it. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26net: txq_trans_update() helperEric Dumazet1-0/+6
We would like to get rid of netdev->trans_start = jiffies; that about all net drivers have to use in their start_xmit() function, and use txq->trans_start instead. This can be done generically in core network, as suggested by David. Some devices, (particularly loopback) dont need trans_start update, because they dont have transmit watchdog. We could add a new device flag, or rely on fact that txq->tran_start can be updated is txq->xmit_lock_owner is different than -1. Use a helper function to hide our choice. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26perf_counter: fix warning & lockupIngo Molnar1-39/+39
- remove bogus warning - fix wakeup from NMI path lockup - also fix up whitespace noise in perf_counter.h Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090525153931.703093461@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25perf_counter: Generic per counter interrupt throttlePeter Zijlstra1-0/+11
Introduce a generic per counter interrupt throttle. This uses the perf_counter_overflow() quick disable to throttle a specific counter when its going too fast when a pmu->unthrottle() method is provided which can undo the quick disable. Power needs to implement both the quick disable and the unthrottle method. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090525153931.703093461@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25perf_counter: x86: Remove interrupt throttlePeter Zijlstra1-2/+0
remove the x86 specific interrupt throttle Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090525153931.616671838@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25netfilter: nf_ct_tcp: fix accepting invalid RST segmentsJozsef Kadlecsik1-0/+4
Robert L Mathews discovered that some clients send evil TCP RST segments, which are accepted by netfilter conntrack but discarded by the destination. Thus the conntrack entry is destroyed but the destination retransmits data until timeout. The same technique, i.e. sending properly crafted RST segments, can easily be used to bypass connlimit/connbytes based restrictions (the sample script written by Robert can be found in the netfilter mailing list archives). The patch below adds a new flag and new field to struct ip_ct_tcp_state so that checking RST segments can be made more strict and thus TCP conntrack can catch the invalid ones: the RST segment is accepted only if its sequence number higher than or equal to the highest ack we seen from the other direction. (The last_ack field cannot be reused because it is used to catch resent packets.) Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-25perf_counter: Propagate inheritance failures down the fork() pathPeter Zijlstra1-2/+2
Fail fork() when we fail inheritance for some reason (-ENOMEM most likely). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090525124600.324656474@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25perf_counter: Remove unused ABI bitsPeter Zijlstra1-2/+2
extra_config_len isn't used for anything, remove it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090525124600.116035832@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25net: remove COMPAT_NET_DEV_OPSAlexander Beregalov1-38/+0
All drivers are already converted to new net_device_ops API and nobody uses old API anymore. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Added PCI ID for new Junghanns.net Single E1 cards.Andreas Eversberg1-0/+1
The new ID is validated by Cologne Chip. LEDs control is also supported. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Cleanup debug messagesKarsten Keil1-7/+7
This patch make debug printk's KERN_DEBUG and also fix some codestyle issues. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add PCI ID for Junghanns 8S cardAndreas Eversberg1-0/+1
new id for HFC-8S Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add XHFC support for embedded Speech-Design board to hfcmultiKarsten Keil1-0/+1
New version without emulating arch specific stuff for the other architectures, the special IO and init functions for the 8xx microcontroller are in a separate include file. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Added layer-1-hold featureAndreas Eversberg1-0/+2
Add IMHOLD_L1 ioctl. The feature will be disabled on closing. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Echo canceler now gets delay information from hardwareAndreas Eversberg2-2/+3
Added tx-fifo information for calculation of current delay to sync tx and rx streams for echo canceler. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add watchdog functionality to hfcmulti driverAndreas Eversberg1-1/+2
This patch was made by Titus Moldovan and provides IOCTL functions for enabling and disabling the controller's built in watchdog. The use is optional. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25Merge branch 'master' of ↵David S. Miller1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-05-24perf_counter: Remove perf_counter_context::nr_enabledPeter Zijlstra1-1/+0
now that pctrl() no longer disables other people's counters, remove the PMU cache code that deals with that. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090523163013.032998331@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-24perf_counter: Change pctrl() behaviourPeter Zijlstra3-0/+15
Instead of en/dis-abling all counters acting on a particular task, en/dis- able all counters we created. [ v2: fix crash on first counter enable ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090523163012.916937244@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23perf_counter: Sanitize counter->mutexPeter Zijlstra1-4/+3
s/counter->mutex/counter->child_mutex/ and make sure its only used to protect child_list. The usage in __perf_counter_exit_task() doesn't appear to be problematic since ctx->mutex also covers anything related to fd tear-down. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090523163012.533186528@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23perf_counter: Fix dynamic irq_period loggingPeter Zijlstra1-0/+1
We call perf_adjust_freq() from perf_counter_task_tick() which is is called under the rq->lock causing lock recursion. However, it's no longer required to be called under the rq->lock, so remove it from under it. Also, fix up some related comments. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <20090523163012.476197912@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23Input: multitouch - add tracking ID to the protocolHenrik Rydberg1-0/+1
There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-23block: Export I/O topology for block devices and partitionsMartin K. Petersen2-0/+48
To support devices with physical block sizes bigger than 512 bytes we need to ensure proper alignment. This patch adds support for exposing I/O topology characteristics as devices are stacked. logical_block_size is the smallest unit the device can address. physical_block_size indicates the smallest I/O the device can write without incurring a read-modify-write penalty. The io_min parameter is the smallest preferred I/O size reported by the device. In many cases this is the same as the physical block size. However, the io_min parameter can be scaled up when stacking (RAID5 chunk size > physical block size). The io_opt characteristic indicates the optimal I/O size reported by the device. This is usually the stripe width for arrays. The alignment_offset parameter indicates the number of bytes the start of the device/partition is offset from the device's natural alignment. Partition tools and MD/DM utilities can use this to pad their offsets so filesystems start on proper boundaries. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>