summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2009-12-03VFS: Add forget_all_cached_acls()Steven Whitehouse1-0/+14
This is required for cluster filesystems which want to use cached ACLs so that they can invalidate the cache when required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Cc: Christoph Hellwig <hch@infradead.org>
2009-12-03block: Allow devices to indicate whether discarded blocks are zeroedMartin K. Petersen2-0/+15
The discard ioctl is used by mkfs utilities to clear a block device prior to putting metadata down. However, not all devices return zeroed blocks after a discard. Some drives return stale data, potentially containing old superblocks. It is therefore important to know whether discarded blocks are properly zeroed. Both ATA and SCSI drives have configuration bits that indicate whether zeroes are returned after a discard operation. Implement a block level interface that allows this information to be bubbled up the stack and queried via a new block device ioctl. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03libata: add translation for SCSI WRITE SAME (aka TRIM support)Christoph Hellwig1-0/+13
Add support for the ATA TRIM command in libata. We translate a WRITE SAME 16 command with the unmap bit set into an ATA TRIM command and export enough information in READ CAPACITY 16 and the block limits EVPD page so that the new SCSI layer discard support will driver this for us. Note that I hardcode the WRITE_SAME_16 opcode for now as the patch to introduce the symbolic is not in 2.6.32 yet but only in the SCSI tree - as soon as it is merged we can fix it up to properly use the symbolic name. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03libata: retry failed FLUSH if device didn't fail itTejun Heo1-1/+1
If ATA device failed FLUSH, it means that the device failed to write out some amount of data and the error needs to be reported to upper layers. As retries can't recover the lost data, FLUSH failures need to be reported immediately in general. However, if FLUSH fails due to transmission errors, the FLUSH needs to be retried; otherwise, filesystems may switch to RO mode and/or raid array may drop a drive for a random transmission glitch. This condition can be rather easily reproduced on certain ahci controllers which go through a PHY event after powersave mode switch + ext4 combination. Powersave mode switch is often closely followed by flush from the filesystem failing the FLUSH with ATA bus error which makes the filesystem code believe that data is lost and drop to RO mode. This was reported in the following bugzilla bug. http://bugzilla.kernel.org/show_bug.cgi?id=14543 This patch makes libata EH retry FLUSH if it wasn't failed by the device. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andrey Vihrov <andrey.vihrov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03Merge commit 'v2.6.32' into nextDmitry Torokhov14-28/+193
2009-12-03KVM: s390: Make psw available on all exits, not just a subsetCarsten Otte1-2/+6
This patch moves s390 processor status word into the base kvm_run struct and keeps it up-to date on all userspace exits. The userspace ABI is broken by this, however there are no applications in the wild using this. A capability check is provided so users can verify the updated API exists. Cc: stable@kernel.org Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: x86: Add KVM_GET/SET_VCPU_EVENTSJan Kiszka1-0/+6
This new IOCTL exports all yet user-invisible states related to exceptions, interrupts, and NMIs. Together with appropriate user space changes, this fixes sporadic problems of vmsave/restore, live migration and system reset. [avi: future-proof abi by adding a flags field] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: VMX: Report unexpected simultaneous exceptions as internal errorsAvi Kivity1-0/+1
These happen when we trap an exception when another exception is being delivered; we only expect these with MCEs and page faults. If something unexpected happens, things probably went south and we're better off reporting an internal error and freezing. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Allow internal errors reported to userspace to carry extra dataAvi Kivity1-0/+4
Usually userspace will freeze the guest so we can inspect it, but some internal state is not available. Add extra data to internal error reporting so we can expose it to the debugger. Extra data is specific to the suberror. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Reorder IOCTLs in main kvm.hJan Kiszka1-118/+117
Obviously, people tend to extend this header at the bottom - more or less blindly. Ensure that deprecated stuff gets its own corner again by moving things to the top. Also add some comments and reindent IOCTLs to make them more readable and reduce the risk of number collisions. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: allow userspace to adjust kvmclock offsetGlauber Costa1-0/+10
When we migrate a kvm guest that uses pvclock between two hosts, we may suffer a large skew. This is because there can be significant differences between the monotonic clock of the hosts involved. When a new host with a much larger monotonic time starts running the guest, the view of time will be significantly impacted. Situation is much worse when we do the opposite, and migrate to a host with a smaller monotonic clock. This proposed ioctl will allow userspace to inform us what is the monotonic clock value in the source host, so we can keep the time skew short, and more importantly, never goes backwards. Userspace may also need to trigger the current data, since from the first migration onwards, it won't be reflected by a simple call to clock_gettime() anymore. [marcelo: future-proof abi with a flags field] [jan: fix KVM_GET_CLOCK by clearing flags field instead of checking it] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Xen PV-on-HVM guest supportEd Swierk1-0/+16
Support for Xen PV-on-HVM guests can be implemented almost entirely in userspace, except for handling one annoying MSR that maps a Xen hypercall blob into guest address space. A generic mechanism to delegate MSR writes to userspace seems overkill and risks encouraging similar MSR abuse in the future. Thus this patch adds special support for the Xen HVM MSR. I implemented a new ioctl, KVM_XEN_HVM_CONFIG, that lets userspace tell KVM which MSR the guest will write to, as well as the starting address and size of the hypercall blobs (one each for 32-bit and 64-bit) that userspace has loaded from files. When the guest writes to the MSR, KVM copies one page of the blob from userspace to the guest. I've tested this patch with a hacked-up version of Gerd's userspace code, booting a number of guests (CentOS 5.3 i386 and x86_64, and FreeBSD 8.0-RC1 amd64) and exercising PV network and block devices. [jan: fix i386 build warning] [avi: future proof abi with a flags field] Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: introduce kvm_vcpu_on_spinZhai, Edwin1-0/+1
Introduce kvm_vcpu_on_spin, to be used by VMX/SVM to yield processing once the cpu detects pause-based looping. Signed-off-by: "Zhai, Edwin" <edwin.zhai@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: Activate Virtualization On DemandAlexander Graf1-1/+1
X86 CPUs need to have some magic happening to enable the virtualization extensions on them. This magic can result in unpleasant results for users, like blocking other VMMs from working (vmx) or using invalid TLB entries (svm). Currently KVM activates virtualization when the respective kernel module is loaded. This blocks us from autoloading KVM modules without breaking other VMMs. To circumvent this problem at least a bit, this patch introduces on demand activation of virtualization. This means, that instead virtualization is enabled on creation of the first virtual machine and disabled on destruction of the last one. So using this, KVM can be easily autoloaded, while keeping other hypervisors usable. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Move assigned device code to own fileAvi Kivity1-0/+17
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Move irq ack notifier list to arch independent codeGleb Natapov1-0/+1
Mask irq notifier list is already there. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Maintain back mapping from irqchip/pin to gsiGleb Natapov1-0/+9
Maintain back mapping from irqchip/pin to gsi to speedup interrupt acknowledgment notifications. [avi: build fix on non-x86/ia64] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Change irq routing table to use gsi indexed arrayGleb Natapov1-3/+18
Use gsi indexed array instead of scanning all entries on each interrupt injection. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Move irq sharing information to irqchip levelGleb Natapov1-1/+1
This removes assumptions that max GSIs is smaller than number of pins. Sharing is tracked on pin level not GSI level. [avi: no PIC on ia64] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03Merge remote branch 'tip/x86/entry' into kvm-updates/2.6.33Avi Kivity1-0/+49
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03Merge branch 'master' into nextJames Morris61-149/+378
2009-12-03include/linux/compiler-gcc4.h: Fix build bug - gcc-4.0.2 doesn't understand ↵Andrew Morton1-0/+2
__builtin_object_size Maybe 4.1.0 doesn't too, but this fixed it for me. Caused by: 4a31276: x86: Turn the copy_from_user check into an (optional) compile time warning 9f0cf4a: x86: Use __builtin_object_size() to validate the buffer size for copy_from_user() Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <200910090724.n997OQl6013538@imap1.linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-03TCPCT part 1d: define TCP cookie option, extend existing struct'sWilliam Allen Simpson1-6/+23
Data structures are carefully composed to require minimal additions. For example, the struct tcp_options_received cookie_plus variable fits between existing 16-bit and 8-bit variables, requiring no additional space (taking alignment into consideration). There are no additions to tcp_request_sock, and only 1 pointer in tcp_sock. This is a significantly revised implementation of an earlier (year-old) patch that no longer applies cleanly, with permission of the original author (Adam Langley): http://thread.gmane.org/gmane.linux.network/102586 The principle difference is using a TCP option to carry the cookie nonce, instead of a user configured offset in the data. This is more flexible and less subject to user configuration error. Such a cookie option has been suggested for many years, and is also useful without SYN data, allowing several related concepts to use the same extension option. "Re: SYN floods (was: does history repeat itself?)", September 9, 1996. http://www.merit.net/mail.archives/nanog/1996-09/msg00235.html "Re: what a new TCP header might look like", May 12, 1998. ftp://ftp.isi.edu/end2end/end2end-interest-1998.mail These functions will also be used in subsequent patches that implement additional features. Requires: TCPCT part 1a: add request_values parameter for sending SYNACK TCPCT part 1b: generate Responder Cookie secret TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS Signed-off-by: William.Allen.Simpson@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONSWilliam Allen Simpson1-1/+32
Define sysctl (tcp_cookie_size) to turn on and off the cookie option default globally, instead of a compiled configuration option. Define per socket option (TCP_COOKIE_TRANSACTIONS) for setting constant data values, retrieving variable cookie values, and other facilities. Move inline tcp_clear_options() unchanged from net/tcp.h to linux/tcp.h, near its corresponding struct tcp_options_received (prior to changes). This is a straightforward re-implementation of an earlier (year-old) patch that no longer applies cleanly, with permission of the original author (Adam Langley): http://thread.gmane.org/gmane.linux.network/102586 These functions will also be used in subsequent patches that implement additional features. Requires: net: TCP_MSS_DEFAULT, TCP_MSS_DESIRED Signed-off-by: William.Allen.Simpson@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03TCPCT part 1b: generate Responder Cookie secretWilliam Allen Simpson1-0/+1
Define (missing) hash message size for SHA1. Define hashing size constants specific to TCP cookies. Add new function: tcp_cookie_generator(). Maintain global secret values for tcp_cookie_generator(). This is a significantly revised implementation of earlier (15-year-old) Photuris [RFC-2522] code for the KA9Q cooperative multitasking platform. Linux RCU technique appears to be well-suited to this application, though neither of the circular queue items are freed. These functions will also be used in subsequent patches that implement additional features. Signed-off-by: William.Allen.Simpson@gmail.com Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives.David S. Miller1-2/+2
Based upon a patch by Philippe De Muyter, and feedback from Mark Lord and Robert Hancock. As noted by Mark Lord, the outdated ATA1 spec specifies a 20msec timeout for setting DRQ but lots of common devices overshoot this. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03skbuff: remove skb_dma_map/unmapAlexander Duyck1-8/+0
The two functions skb_dma_map/unmap are unsafe to use as they cause problems when packets are cloned and sent to multiple devices while a HW IOMMU is enabled. Due to this it is best to remove the code so it is not used by any other network driver maintainters. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct WM831X_MAX_ISEL_VALUE
2009-12-02sched, cputime: Introduce thread_group_times()Hidetoshi Seto1-0/+4
This is a real fix for problem of utime/stime values decreasing described in the thread: http://lkml.org/lkml/2009/11/3/522 Now cputime is accounted in the following way: - {u,s}time in task_struct are increased every time when the thread is interrupted by a tick (timer interrupt). - When a thread exits, its {u,s}time are added to signal->{u,s}time, after adjusted by task_times(). - When all threads in a thread_group exits, accumulated {u,s}time (and also c{u,s}time) in signal struct are added to c{u,s}time in signal struct of the group's parent. So {u,s}time in task struct are "raw" tick count, while {u,s}time and c{u,s}time in signal struct are "adjusted" values. And accounted values are used by: - task_times(), to get cputime of a thread: This function returns adjusted values that originates from raw {u,s}time and scaled by sum_exec_runtime that accounted by CFS. - thread_group_cputime(), to get cputime of a thread group: This function returns sum of all {u,s}time of living threads in the group, plus {u,s}time in the signal struct that is sum of adjusted cputimes of all exited threads belonged to the group. The problem is the return value of thread_group_cputime(), because it is mixed sum of "raw" value and "adjusted" value: group's {u,s}time = foreach(thread){{u,s}time} + exited({u,s}time) This misbehavior can break {u,s}time monotonicity. Assume that if there is a thread that have raw values greater than adjusted values (e.g. interrupted by 1000Hz ticks 50 times but only runs 45ms) and if it exits, cputime will decrease (e.g. -5ms). To fix this, we could do: group's {u,s}time = foreach(t){task_times(t)} + exited({u,s}time) But task_times() contains hard divisions, so applying it for every thread should be avoided. This patch fixes the above problem in the following way: - Modify thread's exit (= __exit_signal()) not to use task_times(). It means {u,s}time in signal struct accumulates raw values instead of adjusted values. As the result it makes thread_group_cputime() to return pure sum of "raw" values. - Introduce a new function thread_group_times(*task, *utime, *stime) that converts "raw" values of thread_group_cputime() to "adjusted" values, in same calculation procedure as task_times(). - Modify group's exit (= wait_task_zombie()) to use this introduced thread_group_times(). It make c{u,s}time in signal struct to have adjusted values like before this patch. - Replace some thread_group_cputime() by thread_group_times(). This replacements are only applied where conveys the "adjusted" cputime to users, and where already uses task_times() near by it. (i.e. sys_times(), getrusage(), and /proc/<PID>/stat.) This patch have a positive side effect: - Before this patch, if a group contains many short-life threads (e.g. runs 0.9ms and not interrupted by ticks), the group's cputime could be invisible since thread's cputime was accumulated after adjusted: imagine adjustment function as adj(ticks, runtime), {adj(0, 0.9) + adj(0, 0.9) + ....} = {0 + 0 + ....} = 0. After this patch it will not happen because the adjustment is applied after accumulated. v2: - remove if()s, put new variables into signal_struct. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Spencer Candland <spencer@bluehost.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> LKML-Reference: <4B162517.8040909@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02sched, cputime: Cleanups related to task_times()Hidetoshi Seto1-0/+2
- Remove if({u,s}t)s because no one call it with NULL now. - Use cputime_{add,sub}(). - Add ifndef-endif for prev_{u,s}time since they are used only when !VIRT_CPU_ACCOUNTING. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Spencer Candland <spencer@bluehost.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> LKML-Reference: <4B1624C7.7040302@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02locking, task_struct: Reduce size on TRACE_IRQFLAGS and 64bitHiroshi Shimamoto1-5/+5
Reorder task_struct field for TRACE_IRQFLAGS to remove padding on 64-bit. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4B135F50.8070302@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02tracing/syscalls: Make syscall events print callbacks staticFrederic Weisbecker1-2/+2
enter_syscall_print_##sname and exit_syscall_print_##sname don't need to have a global scope. Make them static. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <1259734990-9034-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02sched: Revert 498657a478c60be092208422fefa9c7b248729c2Tejun Heo1-0/+5
498657a478c60be092208422fefa9c7b248729c2 incorrectly assumed that preempt wasn't disabled around context_switch() and thus was fixing imaginary problem. It also broke KVM because it depended on ->sched_in() to be called with irq enabled so that it can do smp calls from there. Revert the incorrect commit and add comment describing different contexts under with the two callbacks are invoked. Avi: spotted transposed in/out in the added comment. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Avi Kivity <avi@redhat.com> Cc: peterz@infradead.org Cc: efault@gmx.de Cc: rusty@rustcorp.com.au LKML-Reference: <1259726212-30259-2-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-02kmsg_dump: fix build for CONFIG_PRINTK=nRandy Dunlap1-0/+16
kmsg_dump() fails to build when CONFIG_PRINTK=n; provide stubs for the kmsg_dump*() functions when CONFIG_PRINTK=n. kernel/printk.c: In function 'kmsg_dump': kernel/printk.c:1501: error: 'log_buf_len' undeclared (first use in this function) kernel/printk.c:1502: error: 'logged_chars' undeclared (first use in this function) kernel/printk.c:1506: error: 'log_buf' undeclared (first use in this function) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-02Merge branch 'master' of ↵David S. Miller5-7/+138
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/ht.c
2009-12-02Input: keyboard - fix lack of locking when traversing handler->h_listDmitry Torokhov1-2/+8
Keyboard handler should not attempt to traverse handler->h_list on its own, without any locking, otherwise it races with registering and unregistering of input handles which leads to crashes. Introduce input_handler_for_each_handle() helper that allows safely iterate over all handles attached to a particular handler and switch keyboard handler to use it. Reported-by: Jim Paradis <jparadis@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-02net: Implement for_each_netdev_reverse.Eric W. Biederman1-0/+2
I will need this shortly to implement network namespace shutdown batching. For sanity sake network devices should be removed in the reverse order they were created in. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02net: NETDEV_UNREGISTER_PERNET -> NETDEV_UNREGISTER_BATCHEric W. Biederman1-1/+1
The motivation for an additional notifier in batched netdevice notification (rt_do_flush) only needs to be called once per batch not once per namespace. For further batching improvements I need a guarantee that the netdevices are unregistered in order allowing me to unregister an all of the network devices in a network namespace at the same time with the guarantee that the loopback device is really and truly unregistered last. Additionally it appears that we moved the route cache flush after the final synchronize_net, which seems wrong and there was no explanation. So I have restored the original location of the final synchronize_net. Cc: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02percpu: add missing per_cpu_ptr_to_phys() definition for UPTejun Heo1-0/+5
Commit 3b034b0d084221596bf35c8d893e1d4d5477b9cc implemented per_cpu_ptr_to_phys() but forgot to add UP definition. Add UP definition which is simple wrapper around __pa(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-12-01trace_syscalls: Simplify syscall profileLai Jiangshan1-27/+4
use only one prof_sysenter_enable() instead of prof_sysenter_enable_##sname() use only one prof_sysenter_disable() instead of prof_sysenter_disable_##sname() use only one prof_sysexit_enable() instead of prof_sysexit_enable_##sname() use only one prof_sysexit_disable() instead of prof_sysexit_disable_##sname() Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14D2A1.8060304@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01trace_syscalls: Remove duplicate init_enter_##sname()Lai Jiangshan1-28/+2
use only one init_syscall_trace instead of many init_enter_##sname()/init_exit_##sname() Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14D29B.6090708@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01trace_syscalls: Add syscall_nr field to struct syscall_metadataLai Jiangshan1-2/+2
Add syscall_nr field to struct syscall_metadata, it helps us to get syscall number easier. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14D293.6090800@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01trace_syscalls: Remove enter_id exit_idLai Jiangshan1-2/+0
use ->enter_event->id instead of ->enter_id use ->exit_event->id instead of ->exit_id Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14D288.7030001@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01trace_syscalls: Set event_enter_##sname->data to its metadataLai Jiangshan1-2/+4
Set event_enter_##sname->data to its metadata, it makes codes simpler. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14D282.7050709@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01trace_syscalls: Remove unused event_syscall_enter and event_syscall_exitLai Jiangshan1-2/+2
fix event_enter_##sname->event fix event_exit_##sname->event remove unused event_syscall_enter and event_syscall_exit Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14D278.4090209@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01SLOW_WORK: Move slow_work's proc file to debugfsDavid Howells1-4/+4
Move slow_work's debugging proc file to debugfs. Signed-off-by: David Howells <dhowells@redhat.com> Requested-and-acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01mfd: Correct WM831X_MAX_ISEL_VALUEMark Brown1-2/+2
There was confusion between the array size and the highest ISEL value possible. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Herbert Xu215-2127/+4402
2009-12-01hwrng: core - Replace u32 in driver API with byte arrayIan Molton1-2/+5
This patch implements a new method by which hw_random hardware drivers can pass data to the core more efficiently, using a shared buffer. The old methods have been retained as a compatability layer until all the drivers have been updated. Signed-off-by: Ian Molton <ian.molton@collabora.co.uk> Acked-by: Matt Mackall <mpm@selenic.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-12-01backlight: da903x_bl: control WLED output current in da9034Haojian Zhuang1-0/+4
Update WLED output current source before changing brightness. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>