summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2-11/+25
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits) sh: remove dead LED code for migo-r and ms7724se sh: ecovec build fix for CONFIG_I2C=n sh: ecovec r-standby support sh: ms7724se r-standby support sh: SH-Mobile R-standby register save/restore clocksource: Fix up a registration/IRQ race in the sh drivers. sh: ms7724: modify scan_timing for KEYSC sh: ms7724: Add sh_sir support sh: mach-ecovec24: Add sh_sir support sh: wire up SET/GET_UNALIGN_CTL. sh: allow alignment fault mode to be configured at kernel boot. sh: sh7724: Update FSI/SPU2 clock sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec sh: add sh7724 kick callback to clk_div4_table sh: introduce struct clk_div4_table sh: clock-cpg div4 set_rate() shift fix sh: Turn on speculative return for SH7785 and SH7786 sh: Merge legacy and dynamic PMB modes. sh: Use uncached I/O helpers in PMB setup. sh: Provide uncached I/O helpers. ...
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-0/+89
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-27netdevice.h: check for CONFIG_WLAN instead of CONFIG_WLAN_80211John W. Linville1-1/+1
In "wireless: remove WLAN_80211 and WLAN_PRE80211 from Kconfig" I inadvertantly missed a line in include/linux/netdevice.h. I thereby effectively reverted "net: Set LL_MAX_HEADER properly for wireless." by accident. :-( Now we should check there for CONFIG_WLAN instead. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: stable@kernel.org
2010-02-27[S390] Define new s390 ELF note sections in elf.hMichael Holzheu1-0/+5
S390 ELF core dump currently only contains the PSW, the general purpose registers, the floating point registers and the access registers stored in PRSTATUS/PRFPREG note sections. For analyzing s390 kernel problems additional registers are important. In order to be able to include these registers to a kernel ELF core dump, this patch adds the following five new note sections to elf.h: * NT_S390_TIMER: S390 timer register * NT_S390_TODCMP: S390 TOD comparator register * NT_S390_TODPREG: S390 TOD programmable register * NT_S390_CTRS: S390 control registers * NT_S390_PREFIX: S390 prefix register The new note sections have been already defined and accepted in the upstream binutils package. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26USB: implement non-tree resume ordering constraints for PCI host controllersAlan Stern1-0/+1
This patch (as1331) adds non-tree ordering constraints needed for proper resume of PCI USB host controllers from hibernation. The main issue is that non-high-speed devices must not be resumed before the high-speed root hub, because it is the ehci_bus_resume() routine which takes care of handing the device connection over to the companion controller. If the device resume is attempted before the handover then the device won't be found and it will be treated as though it had disconnected. The patch adds a new field to the usb_bus structure; for each full/low-speed bus this field will contain a pointer to the companion high-speed bus (if one exists). It is used during normal device resume; if the hs_companion pointer isn't NULL then we wait for the root-hub device on the hs_companion bus. A secondary issue is that an EHCI controlller shouldn't be resumed before any of its companions. On some machines I have observed handovers failing if the companion controller is reinitialized after the handover. Thus, the EHCI resume routine must wait for the companion controllers to be resumed. The patch also fixes a small bug in usb_hcd_pci_probe(); an error path jumps to the wrong label, causing a memory leak. [rjw: Fixed compilation for CONFIG_PM_SLEEP unset.] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26PM: Allow device drivers to use dpm_wait()Rafael J. Wysocki1-0/+2
There are some dependencies between devices (in particular, between EHCI USB controllers and their OHCI/UHCI siblings) which are not reflected by the structure of the device tree. With synchronous suspend and resume these dependencies are taken into accout automatically, because the devices in question are always registered in the right order, but to meet these constraints with asynchronous suspend and resume the drivers of these devices will need to use dpm_wait() in their suspend/resume routines, so introduce a helper function allowing them to do that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26PM: Add facility for advanced testing of async suspend/resumeRafael J. Wysocki1-0/+11
Add configuration switch CONFIG_PM_ADVANCED_DEBUG for compiling in extra PM debugging/testing code allowing one to access some PM-related attributes of devices from the user space via sysfs. If CONFIG_PM_ADVANCED_DEBUG is set, add sysfs attribute power/async for every device allowing the user space to access the device's power.async_suspend flag and modify it, if desired. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26PM: Asynchronous suspend and resume of devicesRafael J. Wysocki3-0/+16
Theoretically, the total time of system sleep transitions (suspend to RAM, hibernation) can be reduced by running suspend and resume callbacks of device drivers in parallel with each other. However, there are dependencies between devices such that we're not allowed to suspend the parent of a device before suspending the device itself. Analogously, we're not allowed to resume a device before resuming its parent. The most straightforward way to take these dependencies into accout is to start the async threads used for suspending and resuming devices at the core level, so that async_schedule() is called for each suspend and resume callback supposed to be executed asynchronously. For this purpose, introduce a new device flag, power.async_suspend, used to mark the devices whose suspend and resume callbacks are to be executed asynchronously (ie. in parallel with the main suspend/resume thread and possibly in parallel with each other) and helper function device_enable_async_suspend() allowing one to set power.async_suspend for given device (power.async_suspend is unset by default for all devices). For each device with the power.async_suspend flag set the PM core will use async_schedule() to execute its suspend and resume callbacks. The async threads started for different devices as a result of calling async_schedule() are synchronized with each other and with the main suspend/resume thread with the help of completions, in the following way: (1) There is a completion, power.completion, for each device object. (2) Each device's completion is reset before calling async_schedule() for the device or, in the case of devices with the power.async_suspend flags unset, before executing the device's suspend and resume callbacks. (3) During suspend, right before running the bus type, device type and device class suspend callbacks for the device, the PM core waits for the completions of all the device's children to be completed. (4) During resume, right before running the bus type, device type and device class resume callbacks for the device, the PM core waits for the completion of the device's parent to be completed. (5) The PM core completes power.completion for each device right after the bus type, device type and device class suspend (or resume) callbacks executed for the device have returned. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26PM / Runtime: Add sysfs switch for disabling device run-time PMRafael J. Wysocki2-0/+5
Add new device sysfs attribute, power/control, allowing the user space to block the run-time power management of the devices. If this attribute is set to "on", the driver of the device won't be able to power manage it at run time (without breaking the rules) and the device will always be in the full power state (except when the entire system goes into a sleep state). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2010-02-26Merge branch 'master' of ↵David Woodhouse122-3696/+1573
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 The SmartMedia FTL code depends on new kfifo bits from 2.6.33
2010-02-26mtd: Workaround wrong write protect status on some xD cardsMaxim Levitsky1-0/+6
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26Merge branch 'linux-next' of ↵Linus Torvalds5-65/+102
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (48 commits) x86/PCI: Prevent mmconfig memory corruption ACPI: Use GPE reference counting to support shared GPEs x86/PCI: use host bridge _CRS info by default on 2008 and newer machines PCI: augment bus resource table with a list PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs PCI: read bridge windows before filling in subtractive decode resources PCI: split up pci_read_bridge_bases() PCIe PME: use pci_pcie_cap() PCI PM: Run-time callbacks for PCI bus type PCIe PME: use pci_is_pcie() PCI / ACPI / PM: Platform support for PCI PME wake-up ACPI / ACPICA: Multiple system notify handlers per device ACPI / PM: Add more run-time wake-up fields ACPI: Use GPE reference counting to support shared GPEs PCI PM: Make it possible to force using INTx for PCIe PME signaling PCI PM: PCIe PME root port service driver PCI PM: Add function for checking PME status of devices PCI: mark is_pcie obsolete PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges PCI: pciehp: second try to get big range for pcie devices ...
2010-02-26mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()David Woodhouse1-1/+3
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26V4L/DVB (14003): gspca_cpai1: New gspca subdriver for CPIA CPiA version 1 camsHans de Goede1-0/+1
This new driver supports USB PIA CPiA version 1 cams, replacing the old v4l1 driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13992): gspca_sn9c2028: New gspca subdriverTheodore Kilgore1-0/+1
New gspca subdriver adding support for SN9C2028 dual-mode cameras. Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26mtd: nand: add ->badblockbits for minimum number of set bits in bad block byteMaxim Levitsky1-0/+1
This can be used to protect against bitflips in that field, but now mostly for smartmedia. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: make reads using MTD_OOB_RAW affect only ECC validationMaxim Levitsky1-3/+1
This changes the behavier of MTD_OOB_RAW. It used to read both OOB and data to the data buffer, however you would still need to specify the dummy oob buffer. This is only used in one place, but makes it hard to read data+oob without ECC test, thus I removed that behavier, and fixed the user. Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC validation Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: blktrans: allow FTL drivers to export sysfs attributesMaxim Levitsky1-0/+2
This patch adds an ability to export sysfs attributes below the block disk device. This can be used to pass the udev an information about the FTL and could include the vendor, serial, version, etc... Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26failslab: add ability to filter slab cachesDmitry Monakhov2-2/+8
This patch allow to inject faults only for specific slabs. In order to preserve default behavior cache filter is off by default (all caches are faulty). One may define specific set of slabs like this: # mark skbuff_head_cache as faulty echo 1 > /sys/kernel/slab/skbuff_head_cache/failslab # Turn on cache filter (off by default) echo 1 > /sys/kernel/debug/failslab/cache-filter # Turn on fault injection echo 1 > /sys/kernel/debug/failslab/times echo 1 > /sys/kernel/debug/failslab/probability Acked-by: David Rientjes <rientjes@google.com> Acked-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-02-26mtd: blktrans: Hotplug fixesMaxim Levitsky1-0/+3
* Add locking where it was missing. * Don't do a get_mtd_device in blktrans_open because it would lead to a deadlock; instead do that in add_mtd_blktrans_dev. * Only free the mtd_blktrans_dev structure when the last user exits. * Flush request queue on device removal. * Track users, and call tr->release in del_mtd_blktrans_dev Due to that ->open and release aren't called more that once. Now it is safe to call del_mtd_blktrans_dev while the device is still in use. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: blktrans: remove mtd_blkcore_priv, switch to per device queue and threadMaxim Levitsky1-5/+5
This is the biggest change. To make hotplug possible, and this layer clean, the mtd_blktrans_dev now contains everything for a single mtd block translation device. Also removed some very old leftovers. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: create unlocked versions of {get,put}_mtd_deviceMaxim Levitsky1-1/+2
Use these only if you know that you already hold mtd_table_mutex Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: move more manufacturers to the common cfi.h header fileGuillaume LECERF1-5/+7
Move MANUFACTURER_MACRONIX and MANUFACTURER_SST definitions to the include/linux/mtd/cfi.h header file and rename them to CFI_MFR_MACRONIX and CFI_MFR_SST. All references in drivers/mtd/chips/cfi_cmdset_0002.c are updated to reflect this. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26can: ti hecc module : add platform specific initialization callback.Sriramakrishnan1-2/+6
CAN module on AM3517 requires programming of IO expander as part of init sequence - to enable CAN PHY. Added platform specific callback to handle phy control(switch on /off). Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26mtd: nand: add lock/unlock routinesVimal Singh1-0/+10
Add nand lock / unlock routines. At least 'micron' parts support this. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26Revert "ethtool: Add n-tuple string length to drvinfo and return it"David S. Miller1-1/+0
This reverts commit c79c5ffdce14abb4de3878c5aa8c3c6e5093c69b. As Jeff points out we can't break the user visible interface like this, we need to add this into the reserved[] thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26block: remove padding from io_context on 64bit buildsRichard Kennedy1-1/+1
On 64 bit builds when CONFIG_BLK_CGROUP=n (the default) this removes 8 bytes of padding from structure io_context and drops its size from 72 to 64 bytes, so needing one fewer cachelines and allowing more objects per slab in it's kmem_cache. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> ---- patch against 2.6.33 compiled & test on x86_64 AMDX2 regards Richard Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26block: Consolidate phys_segment and hw_segment limitsMartin K. Petersen2-12/+17
Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen1-1/+8
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26block: Add BLK_ prefix to definitionsMartin K. Petersen1-3/+7
Add a BLK_ prefix to block layer constants. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26block: Remove unused accessor functionMartin K. Petersen1-1/+0
blk_queue_max_hw_sectors is no longer called by any subsystem and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26ethtool: Add n-tuple string length to drvinfo and return itPeter Waskiewicz1-0/+1
The drvinfo struct should include the number of strings that get_rx_ntuple will return. It will be variable if an underlying driver implements its own get_rx_ntuple routine, so userspace needs to know how much data is coming. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()Peter Zijlstra1-1/+1
Since the cpu argument to hw_perf_group_sched_in() is always smp_processor_id(), simplify the code a little by removing this argument and using the current cpu where needed. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1265890918.5396.3.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26perf_events: Add new start/stop PMU callbacksStephane Eranian1-0/+2
In certain situations, the kernel may need to stop and start the same event rapidly. The current PMU callbacks do not distinguish between stop and release (i.e., stop + free the resource). Thus, a counter may be released, then it will be immediately re-acquired. Event scheduling will again take place with no guarantee to assign the same counter. On some processors, this may event yield to failure to assign the event back due to competion between cores. This patch is adding a new pair of callback to stop and restart a counter without actually release the underlying counter resource. On stop, the counter is stopped, its values saved and that's it. On start, the value is reloaded and counter is restarted (on x86, actual restart is delayed until perf_enable()). Signed-off-by: Stephane Eranian <eranian@google.com> [ added fallback to ->enable/->disable for all other PMUs fixed x86_pmu_start() to call x86_pmu.enable() merged __x86_pmu_disable into x86_pmu_stop() ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4b703875.0a04d00a.7896.ffffb824@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26can: netlink support for bus-error reporting and countersWolfgang Grandegger2-4/+16
This patch makes the bus-error reporting configurable and allows to retrieve the CAN TX and RX bus error counters via netlink interface. I have added support for the SJA1000. The TX and RX bus error counters are also copied to the data fields 6..7 of error messages when state changes are reported. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26Input: atkbd - release previously reserved keycodes 248 - 254Dmitry Torokhov1-1/+1
Keycodes in 248 - 254 range were reserved for special needs (scrolling) of atkbd driver. Now that the driver has been switched to use unsigned short keycodes instead of unsigned char we can release this range back into pull. We keep code 255 (ATKBD_KEY_NULL) reserved since users may have been using it to silence keys they do not care about since atkbd silently drops scancodes mapped to this keycode. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-26Input: add KEY_WPS_BUTTON definitionDmitry Torokhov1-0/+1
The new key definition is supposed to be used for buttons that initiate WiFi Protected setup sequence: http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-26Merge branch 'tip/tracing/core' of ↵Ingo Molnar1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/core
2010-02-26Merge commit 'v2.6.33' into tracing/coreIngo Molnar45-210/+319
Conflicts: scripts/recordmcount.pl Merge reason: Merge up to v2.6.33. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26Merge branch 'master' of ↵David S. Miller1-1/+50
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
2010-02-26early_res: Add free_early_partial()Yinghai Lu1-0/+1
To free partial areas in pcpu_setup... Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> LKML-Reference: <4B85E245.5030001@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26rcu: Make rcu_read_lock_sched_held() take boot time into accountPaul E. McKenney3-6/+3
Before the scheduler starts, all tasks are non-preemptible by definition. So, during that time, rcu_read_lock_sched_held() needs to always return "true". This patch makes that be so. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267135607-7056-2-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26Merge commit 'origin/master' into nextBenjamin Herrenschmidt13-57/+209
Manual merge of: drivers/char/hvc_console.c drivers/char/hvc_console.h
2010-02-26Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-47/+90
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits) of: remove undefined request_OF_resource & release_OF_resource of/sparc: Remove sparc-local declaration of allnodes and devtree_lock of: move definition of of_chosen into common code. of: remove unused extern reference to devtree_lock of: put default string compare and #a/s-cell values into common header of/flattree: Don't assume HAVE_LMB of: protect linux/of.h with CONFIG_OF proc_devtree: fix THIS_MODULE without module.h of: Remove old and misplaced function declarations of/flattree: Make the kernel accept ePAPR style phandle information of/flattree: endian-convert members of boot_param_header of: assume big-endian properties, adding conversions where necessary of: use __be32 for cell value accessors of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing of/flattree: use callback to setup initrd from /chosen proc_devtree: include linux/of.h of: make set_node_proc_entry private to proc_devtree.c of: include linux/proc_fs.h of/flattree: merge early_init_dt_scan_memory() common code of: add 'of_' prefix to machine_is_compatible() ...
2010-02-26Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-0/+5
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (31 commits) spi: Correct SPI clock frequency setting in spi_mpc8xxx spi/spi_s3c64xx.c: Fix continuation line formats spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLK spi/dw_spi: Allow dw_spi.c to be a module spi/dw_spi: mmio code style fixups Memory-mapped dw_spi driver spi/dw_spi: fix missing export of dw_spi_remove_host spi/dw_spi: conditional transfer mode changes spi/dw_spi: remove conditional from 'poll_transfer'. spi/dw_spi: fixed a spelling typo in a warning message. spi/dw_spi: add return value to empty mrst_spi_debugfs_init() spi/dw_spi: enable platform specific chipselect. spi/dw_spi: add a FIFO depth detection spi/dw_spi: fix __init/__devinit section mismatch spi: xilinx_spi: Fix up I/O routine wrapping bogosity. spi/spi_imx: add device information by switching pr_debug() to dev_dbg() spi: update MSIOF includes spi/dw_spi: refine the IRQ mode working flow spi/dw_spi: add a missed dw_spi_remove_host() in exit sequence spi/dw_spi: bug fix in wait_till_not_busy() ...
2010-02-26Merge branch 'for-linus' of ↵Linus Torvalds2-2/+45
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits) HID: usbhid: initialize interface pointers early enough HID: extend mask for BUTTON usage page HID: hid-ntrig: Single touch mode tap HID: hid-ntrig: multitouch cleanup and fix HID: n-trig: remove unnecessary tool switching HID: hid-ntrig add multi input quirk and clean up HID: usbhid: introduce timeout for stuck ctrl/out URBs HID: magicmouse: coding style and probe failure fixes HID: remove MODULE_VERSION from new drivers HID: fix up Kconfig entry for MagicMouse HID: add a device driver for the Apple Magic Mouse. HID: Export hid_register_report HID: Support for MosArt multitouch panel HID: add pressure support for the Stantum multitouch panel HID: fixed bug in single-touch emulation on the stantum panel HID: fix typo in error message HID: add mapping for "AL Network Chat" usage HID: use multi input quirk for TouchPack touchscreen HID: make full-fledged hid-bus drivers properly selectable HID: make Wacom modesetting failures non-fatal ...
2010-02-25kprobes: Jump optimization sysctl interfaceMasami Hiramatsu1-0/+8
Add /proc/sys/debug/kprobes-optimization sysctl which enables and disables kprobes jump optimization on the fly for debugging. Changes in v7: - Remove ctl_name = CTL_UNNUMBERED for upstream compatibility. Changes in v6: - Update comments and coding style. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133415.6725.8274.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25kprobes: Introduce kprobes jump optimizationMasami Hiramatsu1-0/+36
Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25Merge branches 'upstream', 'raw_report_modifications' and ↵Jiri Kosina2-33/+2
'apple_magic_mouse' into for-linus Conflicts: drivers/hid/Kconfig
2010-02-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds4-2/+60
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (44 commits) Add MAINTAINERS entry for virtio_console virtio: console: Fill ports' entire in_vq with buffers virtio: console: Error out if we can't allocate buffers for control queue virtio: console: Add ability to remove module virtio: console: Ensure no memleaks in case of unused buffers virtio: console: show error message if hvc_alloc fails for console ports virtio: console: Add debugfs files for each port to expose debug info virtio: console: Add ability to hot-unplug ports virtio: console: Handle port hot-plug virtio: console: Remove cached data on port close virtio: console: Register with sysfs and create a 'name' attribute for ports virtio: console: Ensure only one process can have a port open at a time virtio: console: Add file operations to ports for open/read/write/poll virtio: console: Associate each port with a char device virtio: console: Prepare for writing to userspace buffers virtio: console: Add a new MULTIPORT feature, support for generic ports virtio: console: Introduce a send_buf function for a common path for sending data to host virtio: console: Introduce function to hand off data from host to readers virtio: console: Separate out find_vqs operation into a different function virtio: console: Separate out console init into a new function ...