summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-03-19block: remove 16 bytes of padding from struct request on 64bitsRichard Kennedy1-5/+6
Remove alignment padding to shrink struct request from 336 to 320 bytes so needing one fewer cacheline and therefore removing 48 bytes from struct request_queue. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19sh: INTC ioremap supportMagnus Damm1-0/+4
Extend the INTC code with ioremap() support V2. Support INTC controllers that are not accessible through a 1:1 virt:phys window. Needed by SH-Mobile ARM INTCS. The INTC code behaves as usual if the io window resource is omitted. The slow phys->virt lookup only happens during setup. The fast path code operates on virtual addresses. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19sh: add INTC out of memory error handlingMagnus Damm1-1/+1
Extend the INTC code to warn and return an error code in the case of memory allocation failure. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19Merge branch 'master' into for-linusJens Axboe63-136/+533
Conflicts: block/Kconfig Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19net: Potential null skb->dev dereferenceEric Dumazet1-4/+4
When doing "ifenslave -d bond0 eth0", there is chance to get NULL dereference in netif_receive_skb(), because dev->master suddenly becomes NULL after we tested it. We should use ACCESS_ONCE() to avoid this (or rcu_dereference()) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19bonding: check return value of nofitier when changing typeJiri Pirko1-1/+1
This patch adds the possibility to refuse the bonding type change for other subsystems (such as for example bridge, vlan, etc.) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19net: rename notifier defines for netdev type changeJiri Pirko1-2/+2
Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19rps: Fixed build with CONFIG_SMP not enabled.Tom Herbert1-0/+2
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+1
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: Build fix for mpc52xx watchdog timer code of: Fix comparison of "compatible" properties powerpc/52xx: update defconfigs spi/omap2_mcspi: Use transaction speed if provided spi/omap2_mcspi: fix NULL pointer dereference uartlite: Fix build on sparc.
2010-03-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-16/+17
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) ARM: Fix RiscPC decompressor build errors ARM: Fix sorting of platform group config options and includes ARM: 5991/1: Fix regression in restore_user_regs macro ARM: 5989/1: ARM: KGDB: add support for SMP platforms ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush ARM: Add final piece to fix XIP decompressor in read-only memory video: enable sh_mobile_lcdc on SH-Mobile ARM ARM: mach-shmobile: ap4evb SDHI0 platform data V2 ARM: mach-shmobile: sh7372 SDHI vector merge ARM: mach-shmobile: sh7377 SDHI vector merge ARM: mach-shmobile: sh7367 SDHI vector merge ARM: mach-shmobile: G4EVM KEYSC platform data mtd: enable sh_flctl on SH-Mobile ARM ARM: mach-shmobile: G3EVM FLCTL platform data ARM: mach-shmobile: G3EVM KEYSC platform data Video: ARM CLCD: Better fix for swapped IENB and CNTL registers ARM: Add L2 cache handling to smp boot support ARM: 5960/1: ARM: perf-events: fix v7 event selection mask ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds ...
2010-03-19Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds3-23/+83
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits) perf: Fix unexported generic perf_arch_fetch_caller_regs perf record: Don't try to find buildids in a zero sized file perf: export perf_trace_regs and perf_arch_fetch_caller_regs perf, x86: Fix hw_perf_enable() event assignment perf, ppc: Fix compile error due to new cpu notifiers perf: Make the install relative to DESTDIR if specified kprobes: Calculate the index correctly when freeing the out-of-line execution slot perf tools: Fix sparse CPU numbering related bugs perf_event: Fix oops triggered by cpu offline/online perf: Drop the obsolete profile naming for trace events perf: Take a hot regs snapshot for trace events perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot perf/x86-64: Use frame pointer to walk on irq and process stacks lockdep: Move lock events under lockdep recursion protection perf report: Print the map table just after samples for which no map was found perf report: Add multiple event support perf session: Change perf_session post processing functions to take histogram tree perf session: Add storage for seperating event types in report perf session: Change add_hist_entry to take the tree root instead of session perf record: Add ID and to recorded event data when recording multiple events ...
2010-03-19Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds2-5/+37
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: panasonic-laptop - Fix incomplete registration failure handling backlight: msi-laptop, msi-wmi: fix incomplete registration failure handling backlight: blackfin - Fix missing registration failure handling backlight: classmate-laptop - Fix missing registration failure handling backlight: mbp_nvidia_bl - add five more MacBook variants backlight: Allow properties to be passed at registration backlight: Add backlight_device parameter to check_fb video: backlight/progear, fix pci device refcounting backlight: l4f00242t03: Fix module licence absence. backlight: Revert some const qualifiers backlight: Add Epson L4F00242T03 LCD driver
2010-03-18rcu: Fix local_irq_disable() CONFIG_PROVE_RCU=y false positivesLai Jiangshan1-2/+2
It is documented that local_irq_disable() also delimits RCU_SCHED read-site critical sections. See the document of synchronize_sched() or Documentation/RCU/whatisRCU.txt. So we have to test irqs_disabled() in rcu_read_lock_sched_held(). Otherwise rcu-lockdep brings incorrect complaint. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: eric.dumazet@gmail.com LKML-Reference: <1268940334-10892-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-18OMAP4: PMIC: Rename twl6030_codec as twl6040_codecOlaya, Margarita1-3/+3
Correction for chips: twl6030 is Phoenix Power chip twl6040 is Phoenix Audio chip Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18of: Fix comparison of "compatible" propertiesGrant Likely1-1/+1
Commit 7c7b60cb87547b1664a4385c187f029bf514a737 "of: put default string compare and #a/s-cell values into common header" Breaks various things on powerpc due to using strncasecmp instead of strcasecmp for comparing against "compatible" strings. This causes things like the 4xx PCI code to fail miserably due to the partial matches in code like this: for_each_compatible_node(np, NULL, "ibm,plb-pcix") ppc4xx_probe_pcix_bridge(np); for_each_compatible_node(np, NULL, "ibm,plb-pci") ppc4xx_probe_pci_bridge(np); It's not quite right to do partial name match. Entries in a compatible list are meant to be matched whole. If a device is compatible with both "foo" and "foo1", then the device should have both strings in its "compatible" property. This patch reverts powerpc and microblaze us to use strcasecmp. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> (for patch description) Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michal Simek <michal.simek@petalogix.com>
2010-03-18netfilter: xtables: reduce holes in struct xt_targetJan Engelhardt1-1/+1
This will save one full padding chunk (8 bytes on x86_64) per target. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-18netfilter: xtables: remove almost-unused xt_match_param.data memberJan Engelhardt1-3/+0
This member is taking up a "long" per match, yet is only used by one module out of the roughly 90 modules, ip6t_hbh. ip6t_hbh can be restructured a little to accomodate for the lack of the .data member. This variant uses checking the par->match address, which should avoid having to add two extra functions, including calls, i.e. (hbh_mt6: call hbhdst_mt6(skb, par, NEXTHDR_OPT), dst_mt6: call hbhdst_mt6(skb, par, NEXTHDR_DEST)) Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-18netfilter: update documentation fields of x_tables.hJan Engelhardt1-2/+8
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-18Merge branch 'master' of ../nf-2.6Patrick McHardy2-6/+1
2010-03-18memory hotplug: allow setting of phys_deviceHeiko Carstens1-0/+2
/sys/devices/system/memory/memoryX/phys_device is supposed to contain the number of the physical device that the corresponding piece of memory belongs to. In case a physical device should be replaced or taken offline for whatever reason it is necessary to set all corresponding memory pieces offline. The current implementation always sets phys_device to '0' and there is no way or hook to change that. Seems like there was a plan to implement that but it wasn't finished for whatever reason. So add a weak function which architectures can override to actually set the phys_device from within add_memory_block(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-18kfifo: fix kerneldoc for kfifo_avail and kfifo_in_lockedViral Mehta1-2/+2
Function argument is not having "len" anywhere; "len" is later used in kfifo_{in|out}. So here, it would be appropriate to say, it copies @n bytes and not @len Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-17netfilter: xt_recent: check for unsupported user space flagsTim Gardner1-0/+3
Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-17netfilter: xt_recent: add an entry reaperTim Gardner1-0/+4
One of the problems with the way xt_recent is implemented is that there is no efficient way to remove expired entries. Of course, one can write a rule '-m recent --remove', but you have to know beforehand which entry to delete. This commit adds reaper logic which checks the head of the LRU list when a rule is invoked that has a '--seconds' value and XT_RECENT_REAP set. If an entry ceases to accumulate time stamps, then it will eventually bubble to the top of the LRU list where it is then reaped. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-17netfilter: xtables: merge xt_CONNMARK into xt_connmarkJan Engelhardt2-21/+12
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-17netfilter: xtables: merge xt_MARK into xt_markJan Engelhardt2-5/+5
Two arguments for combining the two: - xt_mark is pretty useless without xt_MARK - the actual code is so small anyway that the kmod metadata and the module in its loaded state totally outweighs the combined actual code size. i586-before: -rw-r--r-- 1 jengelh users 3821 Feb 10 01:01 xt_MARK.ko -rw-r--r-- 1 jengelh users 2592 Feb 10 00:04 xt_MARK.o -rw-r--r-- 1 jengelh users 3274 Feb 10 01:01 xt_mark.ko -rw-r--r-- 1 jengelh users 2108 Feb 10 00:05 xt_mark.o text data bss dec hex filename 354 264 0 618 26a xt_MARK.o 223 176 0 399 18f xt_mark.o And the runtime size is like 14 KB. i586-after: -rw-r--r-- 1 jengelh users 3264 Feb 18 17:28 xt_mark.o Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-17ASoC: Implement WM835x microphone jack detection supportMark Brown1-0/+2
The WM8350 provides microphone presence and short circuit detection. Integrate this with the ASoC jack reporting API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17NET: Support clause 45 MDIO commands at the MDIO bus levelJason Gunthorpe1-4/+8
IEEE 802.3ae clause 45 specifies a somewhat modified MDIO protocol for use by 10GIGE phys. The main change is a 21 bit address split into a 5 bit device ID and a 16 bit register offset. The definition is designed so that normal and extended devices can run on the same MDIO bus. Extend mdio-bitbang to do the new protocol. At the MDIO bus level the protocol is requested by or'ing MII_ADDR_C45 into the register offset. Make phy_read/phy_write/etc pass a full 32 bit register offset. This does not attempt to make the phy layer support C45 style PHYs, just to provide the MDIO bus support. Tested against a Broadcom 10GE phy with ID 0x206034, and several Broadcom 10/100/1000 Phys in normal mode. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17net: core: add IFLA_STATS64 supportJan Engelhardt1-0/+33
`ip -s link` shows interface counters truncated to 32 bit. This is because interface statistics are transported only in 32-bit quantity to userspace. This commit adds a new IFLA_STATS64 attribute that exports them in full 64 bit. References: http://lkml.indiana.edu/hypermail/linux/kernel/0307.3/0215.html Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17rps: Receive Packet SteeringTom Herbert2-2/+33
This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16backlight: Allow properties to be passed at registrationMatthew Garrett1-1/+2
Values such as max_brightness should be set before backlights are registered, but the current API doesn't allow that. Add a parameter to backlight_device_register and update drivers to ensure that they set this correctly. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16backlight: Add backlight_device parameter to check_fbBruno Prémont1-1/+1
check_fb from backlight_ops lacks a reference to the backlight_device that's being referred to. Add this parameter so a backlight_device can be mapped to a single framebuffer, especially if the same driver handles multiple devices on a single system. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16backlight: Revert some const qualifiersRichard Purdie1-4/+4
9905a43b2d563e6f89e4c63c4278ada03f2ebb14 went a little to far with const qualifiers as there are legitiment cases where the function pointers can change (machine specific setup code for example). Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16backlight: Add Epson L4F00242T03 LCD driverAlberto Panizzo1-0/+31
The Epson LCD L4F00242T03 is mounted on the Freescale i.MX31 PDK board. Based upon Marek Vasut work in l4f00242t03.c, this driver provides basic init and power on/off functionality for this device through the sysfs lcd interface. Unfortunately Datasheet for this device are not available and all the control sequences sent to the display were copied from the freescale driver that in the i.MX31 Linux BSP. As in the i.MX31PDK board the core and io suppliers are voltage regulators, that functionality is embedded here, but not strict. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16rcu: Fix tracepoints & lockdep false positiveLai Jiangshan1-1/+1
tracepoint.h uses rcu_dereference(), which triggers this warning: [ 0.701161] =================================================== [ 0.702211] [ INFO: suspicious rcu_dereference_check() usage. ] [ 0.702716] --------------------------------------------------- [ 0.703203] include/trace/events/workqueue.h:68 invoked rcu_dereference_check() without protection! [ 0.703971] [ 0.703990] other info that might help us debug this: [ 0.703993] [ 0.705590] [ 0.705604] rcu_scheduler_active = 1, debug_locks = 0 [ 0.706712] 1 lock held by swapper/1: [ 0.707229] #0: (cpu_add_remove_lock){+.+.+.}, at: [<c0142f54>] cpu_maps_update_begin+0x14/0x20 [ 0.710097] [ 0.710106] stack backtrace: [ 0.712602] Pid: 1, comm: swapper Not tainted 2.6.34-rc1-tip-01613-g72662bb #168 [ 0.713231] Call Trace: [ 0.713997] [<c017174d>] lockdep_rcu_dereference+0x9d/0xb0 [ 0.714746] [<c015a117>] create_workqueue_thread+0x107/0x110 [ 0.715353] [<c015aee0>] ? worker_thread+0x0/0x340 [ 0.715845] [<c015a8e8>] __create_workqueue_key+0x138/0x240 [ 0.716427] [<c0142f92>] ? cpu_maps_update_done+0x12/0x20 [ 0.717012] [<c086b12f>] init_workqueues+0x6f/0x80 [ 0.717530] [<c08576d2>] kernel_init+0x102/0x1f0 [ 0.717570] [<c08575d0>] ? kernel_init+0x0/0x1f0 [ 0.718944] [<c01030fa>] kernel_thread_helper+0x6/0x10 Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B9F48AD.4000404@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16rcu: Make rcu_read_lock_bh_held() allow for disabled BHPaul E. McKenney1-15/+4
Disabling BH can stand in for rcu_read_lock_bh(), and this patch updates rcu_read_lock_bh_held() to allow for this. In order to avoid include-file hell, this function is moved out of line to kernel/rcupdate.c. This fixes a false positive RCU warning. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <20100316000343.GA25857@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16Remove GENHD_FL_DRIVERFSNeilBrown1-1/+1
This flag is not used, so best discarded. Signed-off-by: NeilBrown <neilb@suse.de> -- Hi Jens, I came across this recently - these are the only two occurances of "GENHD_FL_DRIVERFS" in the kernel, so it cannot be needed. NeilBrown Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-15kobj: kref.h incorrectly describes itself as kref.c.Robert P. J. Day1-1/+1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15kobj: add comment and multiple inclusion protectionRobert P. J. Day1-0/+9
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King16-45/+183
2010-03-15block: Finalize conversion of block limits functionsMartin K. Petersen1-24/+0
Remove compatibility wrappers and update remaining drivers. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-15block: Fix overrun in lcm() and move it to libMartin K. Petersen1-0/+8
lcm() was defined to take integer-sized arguments. The supplied arguments are multiplied, however, causing us to overflow given sufficiently large input. That in turn led to incorrect optimal I/O size reporting in some cases (RAID over RAID). Switch lcm() over to unsigned long similar to gcd() and move the function from blk-settings.c to lib. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-15Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown273-1892/+10291
'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
2010-03-15resource: add window supportBjorn Helgaas1-0/+1
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-15resource: add bus number supportBjorn Helgaas1-0/+1
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-15resource: expand IORESOURCE_TYPE_BITS to make room for bus resource typeBjorn Helgaas1-8/+8
No functional change; this just makes room for another resource type. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14Video: ARM CLCD: Better fix for swapped IENB and CNTL registersRussell King1-16/+17
On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-14Add the platform data include for the Xilinx XPS IIC Bus InterfaceRichard Röjfors1-0/+43
This file was missed in the original patch that went into Linus' tree. Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: linux-i2c@vger.kernel.org Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-14Merge branch 'for-linus' of ↵Linus Torvalds2-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add ALDI/MEDION netbook E1222 to qurik reset table Input: ALPS - fix stuck buttons on some touchpads Input: wm831x-on - convert to use genirq Input: ads7846 - add wakeup support Input: appletouch - fix integer overflow issue Input: ad7877 - increase pen up imeout Input: ads7846 - add support for AD7843 parts Input: bf54x-keys - fix system hang when pressing a key Input: alps - add support for the touchpad on Toshiba Tecra A11-11L Input: remove BKL, fix input_open_file() locking Input: serio_raw - remove BKL Input: mousedev - remove BKL Input: add driver for TWL4030 vibrator device Input: enable remote wakeup for PNP i8042 keyboard ports Input: scancode in get/set_keycodes should be unsigned Input: i8042 - use platfrom_create_bundle() helper Input: wacom - merge out and in prox events Input: gamecon - fix off by one range check Input: wacom - replace WACOM_PKGLEN_PENABLED
2010-03-14Merge branch 'i2c-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-algo-bit: Add pre- and post-xfer hooks at24: Init dynamic bin_attribute structures i2c: Drop configure option I2C_DEBUG_CHIP tsl2550: Move from i2c/chips to misc i2c-i801: Don't use the block buffer for I2C block writes i2c-powermac: Be less verbose in the absence of real errors. i2c-smbus: Use device_lock/device_unlock
2010-03-14Merge branch 'for-linus' of ↵Linus Torvalds2-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: Skip check for mandatory locks when unlocking 9p: Fixes a simple bug enabling writes beyond 2GB. 9p: Change the name of new protocol from 9p2010.L to 9p2000.L fs/9p: re-init the wstat in readdir loop net/9p: Add sysfs mount_tag file for virtio 9P device net/9p: Use the tag name in the config space for identifying mount point