summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-08-04jbd2: Change j_state_lock to be a rwlock_tTheodore Ts'o1-1/+1
Lockstat reports have shown that j_state_lock is a major source of lock contention, especially on systems with more than 4 CPU cores. So change it to be a read/write spinlock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits) 9p: fix sparse warnings in new xattr code fs/9p: remove sparse warning in vfs_inode fs/9p: destroy fid on failed remove fs/9p: Prevent parallel rename when doing fid_lookup fs/9p: Add support user. xattr net/9p: Implement TXATTRCREATE 9p call net/9p: Implement attrwalk 9p call 9p: Implement LOPEN fs/9p: This patch implements TLCREATE for 9p2000.L protocol. 9p: Implement TMKDIR 9p: Implement TMKNOD 9p: Define and implement TSYMLINK for 9P2000.L 9p: Define and implement TLINK for 9P2000.L 9p: Define and implement TLINK for 9P2000.L 9p: Implement client side of setattr for 9P2000.L protocol. 9p: getattr client implementation for 9P2000.L protocol. fs/9p: Pass the correct user credentials during attach net/9p: Handle the server returned error properly 9p: readdir implementation for 9p2000.L 9p: Make use of iounit for read/write ...
2010-08-04Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds1-1/+2
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits) xfs simplify and speed up direct I/O completions xfs: move aio completion after unwritten extent conversion direct-io: move aio_complete into ->end_io xfs: fix big endian build xfs: clean up xfs_bmap_get_bp xfs: simplify xfs_truncate_file xfs: kill the b_strat callback in xfs_buf xfs: remove obsolete osyncisosync mount option xfs: clean up filestreams helpers xfs: fix gcc 4.6 set but not read and unused statement warnings xfs: Fix build when CONFIG_XFS_POSIX_ACL=n xfs: fix unsigned underflow in xfs_free_eofblocks xfs: use GFP_NOFS for page cache allocation xfs: fix memory reclaim recursion deadlock on locked inode buffer xfs: fix xfs_trans_add_item() lockdep warnings xfs: simplify and remove xfs_ireclaim xfs: don't block on buffer read errors xfs: move inode shrinker unregister even earlier xfs: remove a dmapi leftover xfs: writepage always has buffers ...
2010-08-04Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds5-5/+41
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
2010-08-03[CPUFREQ] unexport (un)lock_policy_rwsem* functionsAmerigo Wang1-5/+0
lock_policy_rwsem_* and unlock_policy_rwsem_* functions are scheduled to be unexported when 2.6.33. Now there are no other callers of them out of cpufreq.c, unexport them and make them static. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03gpio: Add PMIC GPIO block supportAlek Du1-0/+15
Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is connected to Langwell by SPI interface. So this GPIO driver will be regarded as SPI GPIO expander though the actual GPIO access is through IPC and SRAM. The SPI master contoller will probe this device driver by parsing SPIB table. Cleaned up for new IPC, GPE removed and some printk and other tidying by Alan Cox. Fixes for points noted by Matthew Garrett Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03rar: Move the RAR driver into the right place as its now cleanAlan Cox1-0/+44
We exit staging rar! rar! rar!... Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-03timer: add on-stack deferrable timer interfacesJesse Barnes1-0/+15
In some cases (for instance with kernel threads) it may be desireable to use on-stack deferrable timers to get their power saving benefits. Add interfaces to support this for the IPS driver. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03OMAP: DSS2: OMAPFB: Add support for switching memory regionsVille Syrjälä1-1/+4
Separate the memory region from the framebuffer device a little bit. It's now possible to select the memory region used by the framebuffer device using the new mem_idx parameter of omapfb_plane_info. If the mem_idx is specified it will be interpreted as an index into the memory regions array, if it's not specified the framebuffer's index is used instead. So by default each framebuffer keeps using it's own memory region which preserves backwards compatibility. This allows cloning the same memory region to several overlays and yet each overlay can be controlled independently since they can be associated with separate framebuffer devices. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03l2tp: fix export of header file for userspaceJames Chapman1-0/+1
The header file l2tp.h should be exported to the installed include/linux/ tree for userspace programs. This patch fixes compilation errors in L2TP userspace apps which want to use the new L2TP support introduced in 2.6.35. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03can-raw: Fix skb_orphan_try handlingOliver Hartkopp1-1/+3
Commit fc6055a5ba31e2c14e36e8939f9bf2b6d586a7f5 (net: Introduce skb_orphan_try()) allows an early orphan of the skb and takes care on tx timestamping, which needs the sk-reference in the skb on driver level. So does the can-raw socket, which has not been taken into account here. The patch below adds a 'prevent_sk_orphan' bit in the skb tx shared info, which fixes the problem discovered by Matthias Fuchs here: http://marc.info/?t=128030411900003&r=1&w=2 Even if it's not a primary tx timestamp topic it fits well into some skb shared tx context. Or should be find a different place for the information to protect the sk reference until it reaches the driver level? Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03Input: dynamically allocate ABS informationDaniel Mack1-39/+18
As all callers are now changed to only use the input_abs_*() access helpers, switching over to dynamically allocated ABS information is easy. This reduces size of struct input_dev from 3152 to 1640 on 64 bit architectures. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-03Input: add static inline accessors for ABS propertiesDaniel Mack1-0/+30
In preparation for dynamically allocated ABS axis, introduce a number of static inline access helpers. This should make the transition less painful. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-03Merge branch 'next' into for-linusDmitry Torokhov9-28/+533
2010-08-03Tulip: don't initialize SBE xT3E3 WAN ports.Krzysztof Hałasa1-0/+3
SBE 2T3E3 cards use DECchips 21143 but they need a different driver. Don't even try to use a normal tulip driver with them. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03Merge branch 'vhost-net-next' of ↵David S. Miller1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-08-03tg3: Remove 5720, 5750, and 5750MMatt Carlson1-3/+0
These devices were never released to the public. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03Merge branch 'master' of ↵David S. Miller6-3/+64
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-08-02V4L/DVB: uvc: Move constants and structures definitions to linux/usb/video.hLaurent Pinchart1-0/+397
The UVC host and gadget drivers both define constants and structures in private header files. Move all those definitions to linux/usb/video.h where they can be shared by the two drivers (and be available for userspace applications). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: uvcvideo: Define control information bits using macrosLaurent Pinchart1-0/+7
Use the macros instead of hardcoding numerical constants for the controls information bitfield. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: Increment DVB API versionMauro Carvalho Chehab1-1/+1
A new flag were added at the Frontend capabilities. Increment API minor revision. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: Add FE_CAN_TURBO_FECKlaus Schmidinger1-0/+1
Some (North American) providers use a non-standard mode called "8psk turbo fec". Since there is no flag in the driver that would allow an application to determine whether a particular device can handle "turbo fec", the attached patch introduces FE_CAN_TURBO_FEC. Since there is no flag in the SI data that would indicate that a transponder uses "turbo fec", VDR will assume that all 8psk transponders on DVB-S use "turbo fec". Tested-by: Derek Kelly <user.vdr@gmail.com> Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02virtio_9p.h needs <linux/types.h>Fang Wenqi1-0/+1
Found with makes headers_check: include/linux/virtio_9p.h:15: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02Merge branch 'v2.6.35'Alex Elder6-26/+54
2010-08-02jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stopTheodore Ts'o1-4/+4
By using an atomic_t for t_updates and t_outstanding credits, this should allow us to not need to take transaction t_handle_lock in jbd2_journal_stop(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-02mtd: nand: more BB Detection refactoring and dynamic scan optionsBrian Norris1-0/+4
This is a revision to PATCH 2/2 that I sent. Link: http://lists.infradead.org/pipermail/linux-mtd/2010-July/030911.html Added new flag for scanning of both bytes 1 and 6 of the OOB for a BB marker (instead of simply one or the other). The "check_pattern" and "check_short_pattern" functions were updated to include support for scanning the two different locations in the OOB. In order to handle increases in variety of necessary scanning patterns, I implemented dynamic memory allocation of nand_bbt_descr structs in new function 'nand_create_default_bbt_descr()'. This replaces some increasingly-unwieldy, statically-declared descriptors. It can replace several more (e.g. "flashbased" structs). However, I do not test the flashbased options personally. How this was tested: I referenced 30+ data sheets (covering 100+ parts), and I tested a selection of 10 different chips to varying degrees. Particularly, I tested the creation of bad-block descriptors and basic BB scanning on three parts: ST NAND04GW3B2D, 2K page ST NAND128W3A, 512B page Samsung K9F1G08U0A, 2K page To test these, I wrote some fake bad block markers to the flash (in OOB bytes 1, 6, and elsewhere) to see if the scanning routine would detect them properly. However, this method was somewhat limited because the driver I am using has some bugs in its OOB write functionality. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02Merge firewire branches to be released post v2.6.35Stefan Richter2-112/+451
Conflicts: drivers/firewire/core-card.c drivers/firewire/core-cdev.c and forgotten #include <linux/time.h> in drivers/firewire/ohci.c Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-02mtd: nand: edit macro flag for BBT scan of last page in blockBrian Norris2-2/+2
NAND_BB_LAST_PAGE used to be in nand.h, but it pertained to bad block management and so belongs next to NAND_BBT_SCAN2NDPAGE in bbm.h. Also, its previous flag value (0x00000400) conflicted with NAND_BBT_SCANALLPAGES so I changed its value to 0x00008000. All uses of the name were modified to provide consistency with other "NAND_BBT_*" flags. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: add an ioctl to query the lock status of a flash sectorRichard Cochran1-0/+1
This patchs adds a way for user space programs to find out whether a flash sector is locked. An optional driver method in the mtd_info struct provides the information. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02Merge commit 'v2.6.35' into perf/coreIngo Molnar7-26/+55
Conflicts: tools/perf/Makefile tools/perf/util/hist.c Merge reason: Resolve the conflicts and update to latest upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-02AppArmor: basic auditing infrastructure.John Johansen1-0/+27
Update lsm_audit for AppArmor specific data, and add the core routines for AppArmor uses for auditing. Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02SELinux: special dontaudit for access checksEric Paris1-0/+5
Currently there are a number of applications (nautilus being the main one) which calls access() on files in order to determine how they should be displayed. It is normal and expected that nautilus will want to see if files are executable or if they are really read/write-able. access() should return the real permission. SELinux policy checks are done in access() and can result in lots of AVC denials as policy denies RWX on files which DAC allows. Currently SELinux must dontaudit actual attempts to read/write/execute a file in order to silence these messages (and not flood the logs.) But dontaudit rules like that can hide real attacks. This patch addes a new common file permission audit_access. This permission is special in that it is meaningless and should never show up in an allow rule. Instead the only place this permission has meaning is in a dontaudit rule like so: dontaudit nautilus_t sbin_t:file audit_access With such a rule if nautilus just checks access() we will still get denied and thus userspace will still get the correct answer but we will not log the denial. If nautilus attempted to actually perform one of the forbidden actions (rather than just querying access(2) about it) we would still log a denial. This type of dontaudit rule should be used sparingly, as it could be a method for an attacker to probe the system permissions without detection. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02vfs: re-introduce MAY_CHDIREric Paris1-0/+1
Currently MAY_ACCESS means that filesystems must check the permissions right then and not rely on cached results or the results of future operations on the object. This can be because of a call to sys_access() or because of a call to chdir() which needs to check search without relying on any future operations inside that dir. I plan to use MAY_ACCESS for other purposes in the security system, so I split the MAY_ACCESS and the MAY_CHDIR cases. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02security: move LSM xattrnames to xattr.hMimi Zohar2-3/+14
Make the security extended attributes names global. Updated to move the remaining Smack xattrs. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02LSM: Remove unused arguments from security_path_truncate().Tetsuo Handa1-8/+3
When commit be6d3e56a6b9b3a4ee44a0685e39e595073c6f0d "introduce new LSM hooks where vfsmount is available." was proposed, regarding security_path_truncate(), only "struct file *" argument (which AppArmor wanted to use) was removed. But length and time_attrs arguments are not used by TOMOYO nor AppArmor. Thus, let's remove these arguments. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02KVM: Convert mask notifiers to use irqchip/pin instead of gsiGleb Natapov1-1/+2
Devices register mask notifier using gsi, but irqchip knows about irqchip/pin, so conversion from irqchip/pin to gsi should be done before looking for mask notifier to call. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02KVM: Return EFAULT from kvm ioctl when guest accesses bad areaGleb Natapov1-0/+1
Currently if guest access address that belongs to memory slot but is not backed up by page or page is read only KVM treats it like MMIO access. Remove that capability. It was never part of the interface and should not be relied upon. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02KVM: Use u64 for frame data typesJoerg Roedel1-2/+2
For 32bit machines where the physical address width is larger than the virtual address width the frame number types in KVM may overflow. Fix this by changing them to u64. [sfr: fix build on 32-bit ppc] Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02libata: more PCI IDs for jmicron controllersTejun Heo1-0/+2
Add support for JMB364 and 369. Patch-originally-from: Aries Lee <arieslee@jmicron.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-02ahci_platform: Provide for vendor specific initJassi Brar1-1/+3
Some AHCI implementations may use Vendor Specific HBA[A0h, FFh] and/or Port[70h, 7Fh] registers to 'prepare' for initialization. For that, the platform needs memory mapped address of AHCI registers. This patch adds the 'mmio' argument and reorders the call to platform init function. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-02powerpc/5121: move fsl-diu-fb.h to include/linuxAnatolij Gustschin1-0/+223
Some DIU structures will be used in platform code in subsequent MPC5121 DIU patch, so we move this header to be able to include it elsewhere. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-02NFS: Fix a typo in include/linux/nfs_fs.hTrond Myklebust1-0/+6
nfs_commit_inode() needs to be defined irrespectively of whether or not we are supporting NFSv3 and NFSv4. Allow the compiler to optimise away code in the NFSv2-only case by converting it into an inlined stub function. Reported-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-01workqueue: mark init_workqueues() as early_initcall()Suresh Siddha1-1/+0
Mark init_workqueues() as early_initcall() and thus it will be initialized before smp bringup. init_workqueues() registers for the hotcpu notifier and thus it should cope with the processors that are brought online after the workqueues are initialized. x86 smp bringup code uses workqueues and uses a workaround for the cold boot process (as the workqueues are initialized post smp_init()). Marking init_workqueues() as early_initcall() will pave the way for cleaning up this code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-08-01KVM: Keep slot ID in memory slot structureAvi Kivity1-0/+1
May be used for distinguishing between internal and user slots, or for sorting slots in size order. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Reduce atomic operations on vcpu->requestsAvi Kivity1-1/+6
Usually the vcpu->requests bitmap is sparse, so a test_and_clear_bit() for each request generates a large number of unneeded atomics if a bit is set. Replace with a separate test/clear sequence. This is safe since there is no clear_bit() outside the vcpu thread. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Add mini-API for vcpu->requestsAvi Kivity1-0/+15
Makes it a little more readable and hackable. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Remove memory alias supportAvi Kivity2-6/+1
As advertised in feature-removal-schedule.txt. Equivalent support is provided by overlapping memory regions. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: XSAVE/XRSTOR live migration supportSheng Yang1-0/+12
This patch enable save/restore of xsave state. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: Enable XSAVE/XRSTOR for guestDexuan Cui1-1/+1
This patch enable guest to use XSAVE/XRSTOR instructions. We assume that host_xcr0 would use all possible bits that OS supported. And we loaded xcr0 in the same way we handled fpu - do it as late as we can. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01of/address: Clean up function declarationsGrant Likely1-0/+32
This patch moves the declaration of of_get_address(), of_get_pci_address(), and of_pci_address_to_resource() out of arch code and into the common linux/of_address header file. This patch also fixes some of the asm/prom.h ordering issues. It still includes some header files that it ideally shouldn't be, but at least the ordering is consistent now so that of_* overrides work. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>