summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-10-02sh: Support early IRQ vector map reservation for delayed controllers.Paul Mundt1-0/+1
Some controllers will need to be initialized lazily due to pinmux constraints, while others may simply have no need to be brought online if there are no backing devices for them attached. In this case it's still necessary to be able to reserve their hardware vector map before dynamic IRQs get a hold of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02slub: reduce differences between SMP and NUMAChristoph Lameter1-4/+1
Reduce the #ifdefs and simplify bootstrap by making SMP and NUMA as much alike as possible. This means that there will be an additional indirection to get to the kmem_cache_node field under SMP. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2010-10-02percpu: use percpu allocator on UP tooTejun Heo1-24/+5
On UP, percpu allocations were redirected to kmalloc. This has the following problems. * For certain amount of allocations (determined by PERCPU_DYNAMIC_EARLY_SLOTS and PERCPU_DYNAMIC_EARLY_SIZE), percpu allocator can be used before the usual kernel memory allocator is brought online. On SMP, this is used to initialize the kernel memory allocator. * percpu allocator honors alignment upto PAGE_SIZE but kmalloc() doesn't. For example, workqueue makes use of larger alignments for cpu_workqueues. Currently, users of percpu allocators need to handle UP differently, which is somewhat fragile and ugly. Other than small amount of memory, there isn't much to lose by enabling percpu allocator on UP. It can simply use kernel memory based chunk allocation which was added for SMP archs w/o MMUs. This patch removes mm/percpu_up.c, builds mm/percpu.c on UP too and makes UP build use percpu-km. As percpu addresses and kernel addresses are always identity mapped and static percpu variables don't need any special treatment, nothing is arch dependent and mm/percpu.c implements generic setup_per_cpu_areas() for UP. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi>
2010-10-02percpu: reduce PCPU_MIN_UNIT_SIZE to 32kTejun Heo1-1/+1
In preparation of enabling percpu allocator for UP, reduce PCPU_MIN_UNIT_SIZE to 32k. On UP, the first chunk doesn't have to include static percpu variables and chunk size can be smaller which is important as UP percpu allocator will use contiguous kernel memory to populate chunks. PCPU_MIN_UNIT_SIZE also determines the maximum supported allocation size but 32k should still be enough. Signed-off-by: Tejun Heo <tj@kernel.org>
2010-10-02vmalloc: pcpu_get/free_vm_areas() aren't needed on UPTejun Heo1-0/+2
These functions are used only by percpu memory allocator on SMP. Don't build them on UP. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Nick Piggin <npiggin@kernel.dk>
2010-10-02slub: Dynamically size kmalloc cache allocationsChristoph Lameter1-5/+2
kmalloc caches are statically defined and may take up a lot of space just because the sizes of the node array has to be dimensioned for the largest node count supported. This patch makes the size of the kmem_cache structure dynamic throughout by creating a kmem_cache slab cache for the kmem_cache objects. The bootstrap occurs by allocating the initial one or two kmem_cache objects from the page allocator. C2->C3 - Fix various issues indicated by David - Make create kmalloc_cache return a kmem_cache * pointer. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2010-10-02nfsd: provide callbacks on svc_xprt deletionJ. Bruce Fields1-0/+25
NFSv4.1 needs warning when a client tcp connection goes down, if that connection is being used as a backchannel, so that it can warn the client that it has lost the backchannel connection. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-02nfsd4: keep per-session list of connectionsJ. Bruce Fields1-0/+3
The spec requires us in various places to keep track of the connections associated with each session. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-10-02x86, amd_nb: Enable GART support for AMD family 0x15 CPUsAndreas Herrmann1-0/+1
AMD CPU family 0x15 still supports GART for compatibility reasons. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930124316.GG20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-02nfsd4: remove spkm3J. Bruce Fields1-55/+0
Unfortunately, spkm3 never got very far; while interoperability with one other implementation was demonstrated at some point, problems were found with the spec that were deemed not worth fixing. The kernel code is useless on its own without nfs-utils patches which were never merged into nfs-utils, and were only ever available from citi.umich.edu. They appear not to have been updated since 2005. Therefore it seems safe to assume that this code has no users, and never will. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02net: Export __sock_createPavel Emelyanov1-0/+2
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Tag rpc_xprt with netPavel Emelyanov1-1/+2
The net is known from the xprt_create and this tagging will also give un the context in the conntection workers where real sockets are created. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Add net to xprt_createPavel Emelyanov1-0/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Add net to rpc_create_argsPavel Emelyanov1-0/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Pull net argument downto svc_create_socketPavel Emelyanov1-0/+1
After this the socket creation in it knows the context. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Add net argument to svc_create_xprtPavel Emelyanov1-2/+2
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Factor out rpc_xprt freeingPavel Emelyanov1-0/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-02sunrpc: Factor out rpc_xprt allocationPavel Emelyanov1-0/+1
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-01Merge branch 'idle-release' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: Voluntary leave_mm before entering deeper acpi_idle: add missing \n to printk intel_idle: add missing __percpu markup intel_idle: Change mode 755 => 644 cpuidle: Fix typos intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang
2010-10-01ipv4: introduce __ip_dev_find()Eric Dumazet1-1/+6
ip_dev_find(net, addr) finds a device given an IPv4 source address and takes a reference on it. Introduce __ip_dev_find(), taking a third argument, to optionally take the device reference. Callers not asking the reference to be taken should be in an rcu_read_lock() protected section. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01intel_idle: Voluntary leave_mm before entering deeperSuresh Siddha1-0/+1
Avoid TLB flush IPIs for the cores in deeper c-states by voluntary leave_mm() before entering into that state. CPUs tend to flush TLB in those c-states anyways. acpi_idle does this with C3-type states, but it was not caried over when intel_idle was introduced. intel_idle can apply it to C-states in addition to those that ACPI might export as C3... Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-30wl12xx: fix non-wl12xx build scenariosOhad Ben-Cohen1-0/+13
Support building wl1271-equipped boards without building the wl1271 driver itself, e.g.: CONFIG_MACH_OMAP_ZOOM3=y CONFIG_WL12XX is not set Reported-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-30Merge branch 'fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: fix interrupt clearing for mv_xor missing inline keyword for static function in linux/dmaengine.h dma/shdma: move dereference below the NULL check
2010-09-30dmaengine: driver for the ARM PL080/PL081 PrimeCells v5Linus Walleij1-0/+222
This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells based on the implementation earlier submitted by Peter Pearse. This is working like a charm for memcpy and slave DMA to the PL011 PrimeCell on the PB11MPCore. This DMA controller is used in mostly unmodified form in the ARM RealView and Versatile platforms, in the ST-Ericsson Nomadik, and in the ST SPEAr platform. It has been converted to use the header from the Samsung PL080 derivate instead of its own defintions. The Samsungs have a custom driver in their mach-* folders though, atleast we can share the register definitions. Cc: Peter Pearse <peter.pearse@arm.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-30net: rename netdev rx_queue to ingress_queueEric Dumazet1-1/+1
There is some confusion with rx_queue name after RPS, and net drivers private rx_queue fields. I suggest to rename "struct net_device"->rx_queue to ingress_queue. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-30dummy: percpu stats and lockless xmitEric Dumazet1-0/+1
Converts dummy network device driver to : - percpu stats - 64bit stats - lockless xmit (NETIF_F_LLTX) - performance features added (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-29serial: Add OMAP high-speed UART driverGovindraj.R1-0/+3
This patch adds driver support for OMAP2/3/4 high speed UART. The driver is made separate from 8250 driver as we cannot over load 8250 driver with omap platform specific configuration for features like DMA, it makes easier to implement features like DMA and hardware flow control and software flow control configuration with this driver as required for the omap-platform. This patch involves only the core driver and its dependent. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29sunrpc: fix up rpcauth_remove_module section mismatchStephen Rothwell1-2/+2
On Wed, 29 Sep 2010 14:02:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote: > > After merging the final tree, today's linux-next build (powerpc > ppc44x_defconfig) produced tis warning: > > WARNING: net/sunrpc/sunrpc.o(.init.text+0x110): Section mismatch in reference from the function init_sunrpc() to the function .exit.text:rpcauth_remove_module() > The function __init init_sunrpc() references > a function __exit rpcauth_remove_module(). > This is often seen when error handling in the init function > uses functionality in the exit path. > The fix is often to remove the __exit annotation of > rpcauth_remove_module() so it may be used outside an exit section. > > Probably caused by commit 2f72c9b73730c335381b13e2bd221abe1acea394 > ("sunrpc: The per-net skeleton"). This actually causes a build failure on a sparc32 defconfig build: `rpcauth_remove_module' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o I applied the following patch for today: Fixes: `rpcauth_remove_module' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-28netfilter: ctnetlink: add support for user-space expectation helpersPablo Neira Ayuso1-0/+1
This patch adds the basic infrastructure to support user-space expectation helpers via ctnetlink and the netfilter queuing infrastructure NFQUEUE. Basically, this patch: * adds NF_CT_EXPECT_USERSPACE flag to identify user-space created expectations. I have also added a sanity check in __nf_ct_expect_check() to avoid that kernel-space helpers may create an expectation if the master conntrack has no helper assigned. * adds some branches to check if the master conntrack helper exists, otherwise we skip the code that refers to kernel-space helper such as the local expectation list and the expectation policy. * allows to set the timeout for user-space expectations with no helper assigned. * a list of expectations created from user-space that depends on ctnetlink (if this module is removed, they are deleted). * includes USERSPACE in the /proc output for expectations that have been created by a user-space helper. This patch also modifies ctnetlink to skip including the helper name in the Netlink messages if no kernel-space helper is set (since no user-space expectation has not kernel-space kernel assigned). You can access an example user-space FTP conntrack helper at: http://people.netfilter.org/pablo/userspace-conntrack-helpers/nf-ftp-helper-userspace-POC.tar.bz Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-3/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
2010-09-28net: Add netif_copy_real_num_queues() for use by virtual net driversBen Hutchings1-0/+12
This sets the active numbers of queues on a net device to match another. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28net: Allow changing number of RX queues after device allocationBen Hutchings1-1/+15
For RPS, we create a kobject for each RX queue based on the number of queues passed to alloc_netdev_mq(). However, drivers generally do not determine the numbers of hardware queues to use until much later, so this usually represents the maximum number the driver may use and not the actual number in use. For TX queues, drivers can update the actual number using netif_set_real_num_tx_queues(). Add a corresponding function for RX queues, netif_set_real_num_rx_queues(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28tunnels: prepare percpu accountingEric Dumazet1-0/+1
Tunnels are going to use percpu for their accounting. They are going to use a new tstats field in net_device. skb_tunnel_rx() is changed to be a wrapper around __skb_tunnel_rx() IPTUNNEL_XMIT() is changed to be a wrapper around __IPTUNNEL_XMIT() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28Phonet: Implement Pipe Controller to support Nokia Slim ModemsKumar Sanghvi1-0/+5
Phonet stack assumes the presence of Pipe Controller, either in Modem or on Application Processing Engine user-space for the Pipe data. Nokia Slim Modems like WG2.5 used in ST-Ericsson U8500 platform do not implement Pipe controller in them. This patch adds Pipe Controller implemenation to Phonet stack to support Pipe data over Phonet stack for Nokia Slim Modems. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28tcp: Fix >4GB writes on 64-bit.David S. Miller1-1/+1
Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by: Olaf Bonorden <bono@onlinehome.de> Reported-by: Daniel Büse <dbuese@gmx.de> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix rounding-bug in __unmap_single x86/amd-iommu: Work around S3 BIOS bug x86/amd-iommu: Set iommu configuration flags in enable-loop x86, setup: Fix earlyprintk=serial,0x3f8,115200 x86, setup: Fix earlyprintk=serial,ttyS0,115200
2010-09-27sunrpc: Make the /proc/net/rpc appear in net namespacesPavel Emelyanov1-8/+15
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-27sunrpc: Tag svc_xprt with netPavel Emelyanov1-0/+2
The transport representation should be per-net of course. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-27sunrpc: Add routines that allow registering per-net cachesPavel Emelyanov1-0/+2
Existing calls do the same, but for the init_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-27sunrpc: Add net to pure API callsPavel Emelyanov1-2/+2
There are two calls that operate on ip_map_cache and are directly called from the nfsd code. Other places will be handled in a different way. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-27sunrpc: Make xprt auth cache release work with the xprtPavel Emelyanov1-1/+2
This is done in order to facilitate getting the ip_map_cache from which to put the ip_map. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-27Merge branch 'master' of ↵David S. Miller2-6/+6
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
2010-09-27net: loopback driver cleanupEric Dumazet1-2/+4
loopback driver uses dev->ml_priv to store its percpu stats pointer. It uses ugly casts "(void __percpu __force *)" to shut up sparse complains. Define an union to better document we use ml_priv in loopback driver and define a lstats field with appropriate types. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: skb_frag_t can be smaller on small archesEric Dumazet1-0/+5
On 32bit arches, if PAGE_SIZE is smaller than 65536, we can use 16bit offset and size fields. This patch saves 72 bytes per skb on i386, or 128 bytes after rounding. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-25Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASKMark Lord1-0/+3
Ensure that 'sysctl_hung_task_timeout_secs' is defined even when CONFIG_DETECT_HUNG_TASK is not set. This way we can safely reference it without need for ifdefs in the code elsewhere. eg. in block/blk-exec.c Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-25stmmac: review the wake-up supportGiuseppe Cavallaro1-0/+1
If the PM support is available this is passed through the platform instead to be hard-coded in the core files. WoL on Magic Frame can be enabled by using the ethtool support. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24net: davinci_emac: cleanup unused mdio emac codeCyril Chemparathy1-3/+0
This patch removes code that has been rendered useless by the previous patches in this series. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24net: davinci_emac: switch to new mdioCyril Chemparathy1-0/+9
This patch switches the emac implementation over to the newly separated MDIO driver. With this, the mdio bus frequency defaults to a safe 2.2MHz. Boards may optionally specify a bus frequency via platform data. The phy identification scheme has been modified to use a phy bus id instead of a mask. This largely serves to eliminate the "phy search" code in emac init. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24net: davinci_emac: separate out davinci mdioCyril Chemparathy1-0/+4
Davinci's MDIO controller is present on other TI devices, without an accompanying EMAC. For example, on tnetv107x, the same MDIO module is used in conjunction with a 3-port switch hardware. By separating the MDIO controller code into its own platform driver, this patch allows common logic to be reused on such platforms. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24NFSv4.1: keep seq_res.sr_slot as pointer rather than an indexBenny Halevy1-1/+1
Having to explicitly initialize sr_slotid to NFS4_MAX_SLOT_TABLE resulted in numerous bugs. Keeping the current slot as a pointer to the slot table is more straight forward and robust as it's implicitly set up to NULL wherever the seq_res member is initialized to zeroes. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>