summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-10-16Merge branch 'master' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 into for-davem
2010-10-15x86: Remove stale pmtimer_64.cThomas Gleixner1-2/+0
This file is unused since the apic unification in 2.6.29, but nobody noticed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-15block: Make the integrity mapped property a bio flagMartin K. Petersen1-2/+1
Previously we tracked whether the integrity metadata had been remapped using a request flag. This was fine for low-level retries. However, if an I/O was redriven by upper layers we would end up remapping again, causing the retry to fail. Deprecate the REQ_INTEGRITY flag and introduce BIO_MAPPED_INTEGRITY which enables filesystems to notify lower layers that the bio in question has already been remapped. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-15drbd: add race-breaker to drbd_go_disklessLars Ellenberg1-1/+1
This adds a necessary race breaker to these commits: drbd: fix for possible deadlock on IO error during resync drbd: drop wrong debug asserts, fix recently introduced race What we do is get a refcount, check the state, then depending on the state and the requested minimum disk state, either hold it (success), or give it back immediately (failed "try lock"). Some code paths (flushing of drbd metadata) may still grab and hold a refcount even if we are D_FAILED (application IO won't). So even if we hit local_cnt == 0 once after being D_FAILED, we still need to wait for that again after we changed to D_DISKLESS. Once local_cnt reaches 0 while we are D_DISKLESS, we can be sure that no one will look at the protected members anymore, so only then is it safe to free them. We cannot easily convert to standard locking primitives here, as we want to be able to use it in atomic context (we always do a "try lock"), as well as hold references for a "long time" (from IO submission to completion callback). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-15oprofile: fix linker errorsAnand Gadiyar1-1/+1
Commit e9677b3ce (oprofile, ARM: Use oprofile_arch_exit() to cleanup on failure) caused oprofile_perf_exit to be called in the cleanup path of oprofile_perf_init. The __exit tag for oprofile_perf_exit should therefore be dropped. The same has to be done for exit_driverfs as well, as this function is called from oprofile_perf_exit. Else, we get the following two linker errors. LD .tmp_vmlinux1 `oprofile_perf_exit' referenced in section `.init.text' of arch/arm/oprofile/built-in.o: defined in discarded section `.exit.text' of arch/arm/oprofile/built-in.o make: *** [.tmp_vmlinux1] Error 1 LD .tmp_vmlinux1 `exit_driverfs' referenced in section `.text' of arch/arm/oprofile/built-in.o: defined in discarded section `.exit.text' of arch/arm/oprofile/built-in.o make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15Merge remote branch 'tip/perf/core' into oprofile/coreRobert Richter18-91/+245
Conflicts: arch/arm/oprofile/common.c kernel/perf_event.c
2010-10-15sh: clkfwk: Add a helper for rate rounding by divisor ranges.Paul Mundt1-0/+3
This adds a new clk_rate_div_range_round() for implementing rate rounding by divisor ranges. This can be used trivially by clocks that support arbitrary ranged divisors without the need for rate table construction. This should only be used by clocks that both have large divisor ranges in addition to clocks that will never be arbitrarily scaled, as the lack of a backing frequency table will prevent cpufreq from being able to do much of anything with them. Primarily intended for use as a ->recalc helper. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15sh: clkfwk: Abstract rate rounding helper.Paul Mundt1-0/+1
Presently the only assisted rate rounding is frequency table backed, but there are cases where it's impractical to use a frequency table for certain clocks (such as the FSIDIV case, which supports 65535 divisors), and we wish to reuse the same rate rounding algorithm. This breaks out the core of the rate rounding logic in to its own helper routine and shuffles the frequency table logic around, switching to using an iterator for the generic helper routine. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not setPhilipp Reisner1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2010-10-15sh: clkfwk: support clock remapping.Paul Mundt1-0/+10
This implements support for ioremapping of register windows that encapsulate clock control registers used by a struct clk, with transparent sibling inheritance. Root clocks at the top of a given topology often encapsulate the entire register space of all of their sibling clocks, so this mapping can be done once and handed down. A given clock enable/disable case maps out to a single bit in a shared register, so this prevents creating multiple overlapping mappings. The mapping case breaks down in to a couple of different situations: - Sibling clocks without a specific mapping. - Root clocks without a specific mapping. - Any of sibling/root clocks with a specific mapping. Sibling clocks with no specified mapping will grovel up the clock chain and install the root clock mapping unconditionally at registration time. Root clocks without their own mappings have a dummy BSS-initialized mapping inserted that is handed down the chain just like any other mapping. This permits all of the sibling clock ops to read/write using the mapping offsets without any special configuration, enabling them to not care whether access ultimately goes through translatable or untranslatable memory. Any clock with its own mapping will have the window initialized at registration time and be ready for use by its clock ops. Failure to establish the mapping will prevent registration, so no additional sanity checks are needed. Sibling clocks that double as parents for the moment will not propagate their mapping down, but this is easily tunable if the need arises. All clock mappings are kref refcounted, with each instance of mapping inheritance incrementing the refcount. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15Un-inline the core-dump helper functionsLinus Torvalds1-32/+2
Tony Luck reports that the addition of the access_ok() check in commit 0eead9ab41da ("Don't dump task struct in a.out core-dumps") broke the ia64 compile due to missing the necessary header file includes. Rather than add yet another include (<asm/unistd.h>) to make everything happy, just uninline the silly core dump helper functions and move the bodies to fs/exec.c where they make a lot more sense. dump_seek() in particular was too big to be an inline function anyway, and none of them are in any way performance-critical. And we really don't need to mess up our include file headers more than they already are. Reported-and-tested-by: Tony Luck <tony.luck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-14drivers: misc: ti-st: fix review commentsPavan Savoy1-2/+0
Based on comments from Jiri Slaby, drop the register storage specifier, remove the unused code, cleanup the const to non-const type casting. Also make the line discipline ops structure static, since its a singleton, unmodified structure which need not be in heap. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-14Don't dump task struct in a.out core-dumpsLinus Torvalds1-1/+1
akiphie points out that a.out core-dumps have that odd task struct dumping that was never used and was never really a good idea (it goes back into the mists of history, probably the original core-dumping code). Just remove it. Also do the access_ok() check on dump_write(). It probably doesn't matter (since normal filesystems all seem to do it anyway), but he points out that it's normally done by the VFS layer, so ... [ I suspect that we should possibly do "vfs_write()" instead of calling ->write directly. That also does the whole fsnotify and write statistics thing, which may or may not be a good idea. ] And just to be anal, do this all for the x86-64 32-bit a.out emulation code too, even though it's not enabled (and won't currently even compile) Reported-by: akiphie <akiphie@lavabit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-14drbd: fix unlikely access after free and list corruptionLars Ellenberg1-2/+2
Various cleanup paths have been incomplete, for the very unlikely case that we cannot allocate enough bios from process context when submitting on behalf of the peer or resync process. Never observed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Allow larger values for c-fill-target.Philipp Reisner1-1/+1
Connections through a compressing proxy might have more bits on the fly. 500MByte instead of 50MByte Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Track the reasons to suspend IO in dedicated state bitsPhilipp Reisner1-3/+7
There are three ways to get IO suspended: * Loss of any access to data * Fence-peer-handler running * User requested to suspend IO Track those in different bits, so that one condition clearing its state bit does not interfere with the other two conditions. Only when the user resumes IO he overrules all three bits. The fact is hidden from the user, he sees only a single suspend bit. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Sending of big packets, for payloads from 64KByte to 4GBytePhilipp Reisner1-0/+2
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: new configuration parameter c-min-rateLars Ellenberg2-0/+5
We now track the data rate of locally submitted resync related requests, and can thus detect non-resync activity on the lower level device. If the current sync rate is above c-min-rate, and the lower level device appears to be busy, we throttle the resyncer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: New sync parameters for the smart resync rate controllerPhilipp Reisner2-12/+16
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Do not allow a fencing-policy of resource-and-stonith with protocol APhilipp Reisner1-0/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Finished the "on-no-data-accessible suspend-io;" functionalityPhilipp Reisner3-0/+7
When no data is accessible (no connection to the peer, nor a local disk) allow the user to select to freeze all IO operations instead of getting IO errors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14Merge branch 'linus' into sched/coreIngo Molnar12-9/+21
Merge reason: update from -rc5 to -almost-final Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-14stopmachine: Define __stop_machine when CONFIG_STOP_MACHINE=nMasami Hiramatsu1-2/+8
Define dummy __stop_machine() function even when CONFIG_STOP_MACHINE=n. This getcpu-required version of stop_machine() will be used from poke_text_smp(). Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101014031030.4100.34156.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-14powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chipsKumar Gala1-0/+8
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14Phonet: 'connect' socket implementation for Pipe controllerKumar Sanghvi1-2/+1
Based on suggestion by Rémi Denis-Courmont to implement 'connect' for Pipe controller logic, this patch implements 'connect' socket call for the Pipe controller logic. The patch does following:- - Removes setsockopts for PNPIPE_CREATE and PNPIPE_DESTROY - Adds setsockopt for setting the Pipe handle value - Implements connect socket call - Updates the Pipe controller logic User-space should now follow below sequence with Pipe controller:- -socket -bind -setsockopt for PNPIPE_PIPE_HANDLE -connect -setsockopt for PNPIPE_ENCAP_IP -setsockopt for PNPIPE_ENABLE GPRS/3G data has been tested working fine with this. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13wext: fix alignment problem in serializing 'struct iw_point'Gerrit Renker1-1/+1
wext: fix alignment problem in serializing 'struct iw_point' This fixes a typo in the definition of the serialized length of struct iw_point: a) wireless.h is exported to userspace, the typo causes IW_EV_POINT_PK_LEN to be 12 on 64-bit, and 8 on 32-bit systems (causing misalignment); b) in compat-64 mode iwe_stream_add_point() memcpys overlap (see below). The second case in in compat-64 mode looks like (variable names are as in include/net/iw_handler.h:iwe_stream_add_point()): point_len = IW_EV_COMPAT_POINT_LEN = 8 lcp_len = IW_EV_COMPAT_LCP_LEN = 4 2nd memcpy: IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN = 12 - 4 = 8 IW_EV_LCP_PK_LEN <--------------> *---> 'extra' data area +-------+-------+-------+-------+---------------+------- ...-+ | len | cmd |length | flags | (empty) -> extra ... | +-------+-------+-------+-------+---------------+------- ...-+ 2 2 2 2 4 lcp_len <--------------> <-!! OVERLAP !!> <--1st memcpy--><------- 2nd memcpy -----------> <---- 3rd memcpy ------- ... > <--------- point_len ----------> This case could cause overrun whenever iw_point.length < 4. The other two cases are - * 32-bit systems: IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN = 8 - 4 = 4, the second memcpy copies exactly the 4 required bytes; * 64-bit systems: IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN = 12 - 4 = 8, the second memcpy copies a superfluous (but non overlapping) 4 bytes. The patch changes IW_EV_POINT_PK_LEN to be 8, so that in all 3 cases always only the requested iw_point.{length,flags} (both __u16) are copied, avoiding overrrun (compat-64) and superfluous copy (64-bit). In addition, the userspace header is sanitized (in agreement with version 30 of the wireless tools). Many thanks to Johannes Berg for help and review with this patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13block: Ensure physical block size is unsigned intMartin K. Petersen1-2/+2
Physical block size was declared unsigned int to accomodate the maximum size reported by READ CAPACITY(16). Make sure we use the right type in the related functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-13netfilter: xtables: remove unused definesJan Engelhardt3-12/+0
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13netfilter: xtables: unify {ip,ip6,arp}t_error_targetJan Engelhardt4-21/+14
Unification of struct *_error_target was forgotten in v2.6.16-1689-g1e30a01. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13netfilter: xtables: resolve indirect macros 3/3Jan Engelhardt3-104/+67
2010-10-13netfilter: xtables: resolve indirect macros 2/3Jan Engelhardt3-29/+24
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13netfilter: xtables: resolve indirect macros 1/3Jan Engelhardt3-13/+18
Many of the used macros are just there for userspace compatibility. Substitute the in-kernel code to directly use the terminal macro and stuff the defines into #ifndef __KERNEL__ sections. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13Input: serio - support multiple child devices per single parentDmitry Eremin-Solenikov1-1/+3
Some (rare) serio devices need to have multiple serio children. One of the examples is PS/2 multiplexer present on several TQC STKxxx boards, which connect PS/2 keyboard and mouse to single tty port. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: add ROHM BU21013 touch panel controller supportNaveen Kumar Gaddipati1-0/+44
Add the ROHM BU21013 capacitive touch panel controller support with i2c interface. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13sh: remove name and id from struct clkMagnus Damm1-3/+0
Remove "name" and "id" from drivers/sh/ struct clk. The struct clk members "name" and "id" are not used now when matching is done through clkdev. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13of/irq: remove references to NO_IRQ in drivers/of/platform.cAndres Salomon1-0/+3
Instead of referencing NO_IRQ in platform.c, define some helper functions in irq.c to call instead from platform.c. Keep NO_IRQ usage local to irq.c, and define NO_IRQ if not defined in headers. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13of/promtree: add package-to-path support to pdtAndres Salomon1-0/+3
package-to-path is a PROM function which tells us the real (full) name of the node. This provides a hook for that in the prom ops struct, and makes use of it in the pdt code when attempting to determine a node's name. If the hook is available, try using it (falling back to looking at the "name" property if it fails). Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13of/promtree: add of_pdt namespace to pdt codeAndres Salomon1-1/+1
For symbols still lacking namespace qualifiers, add an of_pdt_ prefix. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13of/promtree: no longer call prom_ functions directly; use an ops structureAndres Salomon1-1/+19
Rather than assuming an architecture defines prom_getchild and friends, define an ops struct with hooks for the various prom functions that pdt.c needs. This ops struct is filled in by the arch-(and sometimes firmware-)specific code, and passed to of_pdt_build_devicetree. Update sparc code to define the ops struct as well. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13Merge commit 'v2.6.36-rc7' into spi/nextGrant Likely5-5/+6
2010-10-13spi/pl022: get rid of chipinfo dev pointerLinus Walleij1-1/+0
What is the dev pointer doing inside the platform data anyway. We have another pointer to the actual device at hand, use that. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13spi/pl022: Add spi->mode support to AMBA SPI driverKevin Wells1-6/+0
This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13spi/pl022: add PrimeCell generic DMA supportLinus Walleij1-0/+6
This extends the PL022 SSP/SPI driver with generic DMA engine support using the PrimeCell DMA engine interface. Also fix up the test code for the U300 platform. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-13memblock, bootmem: Round pfn properly for memory and reserved regionsYinghai Lu1-13/+12
We need to round memory regions correctly -- specifically, we need to round reserved region in the more expansive direction (lower limit down, upper limit up) whereas usable memory regions need to be rounded in the more restrictive direction (lower limit up, upper limit down). This introduces two set of inlines: memblock_region_memory_base_pfn() memblock_region_memory_end_pfn() memblock_region_reserved_base_pfn() memblock_region_reserved_end_pfn() Although they are antisymmetric (and therefore are technically duplicates) the use of the different inlines explicitly documents the programmer's intention. The lack of proper rounding caused a bug on ARM, which was then found to also affect other architectures. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB4CDFD.4020105@kernel.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-12net: percpu net_device refcountEric Dumazet1-3/+4
We tried very hard to remove all possible dev_hold()/dev_put() pairs in network stack, using RCU conversions. There is still an unavoidable device refcount change for every dst we create/destroy, and this can slow down some workloads (routers or some app servers, mmap af_packet) We can switch to a percpu refcount implementation, now dynamic per_cpu infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes per device. On x86, dev_hold(dev) code : before lock incl 0x280(%ebx) after: movl 0x260(%ebx),%eax incl fs:(%eax) Stress bench : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE) Before: real 1m1.662s user 0m14.373s sys 12m55.960s After: real 0m51.179s user 0m15.329s sys 10m15.942s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12Bluetooth: Support SDIO devices that are AMP controllersDavid Vrabel1-0/+1
Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Merge branch 'linus' into core/lockingThomas Gleixner68-200/+581
Reason: Pull in the semaphore related changes Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12genirq: Remove the now unused sparse irq leftoversThomas Gleixner1-10/+2
The move_irq_desc() function was only used due to the problem that the allocator did not free the old descriptors. So the descriptors had to be moved in create_irq_nr(). That's history. The code would have never been able to move active interrupt descriptors on affinity settings. That can be done in a completely different way w/o all this horror. Remove all of it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Sanitize dynamic irq handlingThomas Gleixner1-4/+8
Use the cleanup functions of the dynamic allocator. No need to have separate implementations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Remove arch_init_chip_data()Thomas Gleixner1-3/+0
This function should have not been there in the first place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>