summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-11-12netfilter: NF_HOOK_COND has wrong conditionalEric Paris1-1/+1
The NF_HOOK_COND returns 0 when it shouldn't due to what I believe to be an error in the code as the order of operations is not what was intended. C will evalutate == before =. Which means ret is getting set to the bool result, rather than the return value of the function call. The code says if (ret = function() == 1) when it meant to say: if ((ret = function()) == 1) Normally the compiler would warn, but it doesn't notice it because its a actually complex conditional and so the wrong code is wrapped in an explict set of () [exactly what the compiler wants you to do if this was intentional]. Fixing this means that errors when netfilter denies a packet get propagated back up the stack rather than lost. Problem introduced by commit 2249065f (netfilter: get rid of the grossness in netfilter.h). Signed-off-by: Eric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-11-11serial: Add support for UART on VIA VT8500 and compatiblesAlexey Charkov1-0/+3
This adds a driver for the serial ports found in VIA and WonderMedia Systems-on-Chip. Interrupt-driven FIFO operation is implemented. The hardware also supports pure register-based operation (which is slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes long, DMA operation is probably not worth the hassle. Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11ifx6x60: SPI protocol driver for Infineon 6x60 modemRuss Gorby1-0/+14
Prototype driver for the IFX6x60 series of SPI attached modems by Jim Stanley and Russ Gorby Signed-off-by: Russ Gorby <richardx.r.gorby@intel.com> [Some reworking and a major cleanup] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11usb: USB3.0 ch11 definitionsTatyana Brokhman2-0/+51
Adding hub SuperSpeed usb definitions as defined by ch10 of the USB3.0 spec. Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11block: remove unused copy_io_context()Jens Axboe1-1/+0
Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-11uio: Change mail address of Hans J. KochHans J. Koch1-1/+1
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11driver core: prune docs about device_interfaceBrandon Philips2-10/+0
drivers/base/intf.c was removed before the beginning of (git) time but its Documentation stuck around. Remove it. Signed-off-by: Brandon Philips <brandon@ifup.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11sched: Use group weight, idle cpu metrics to fix imbalances during idleSuresh Siddha1-0/+1
Currently we consider a sched domain to be well balanced when the imbalance is less than the domain's imablance_pct. As the number of cores and threads are increasing, current values of imbalance_pct (for example 25% for a NUMA domain) are not enough to detect imbalances like: a) On a WSM-EP system (two sockets, each having 6 cores and 12 logical threads), 24 cpu-hogging tasks get scheduled as 13 on one socket and 11 on another socket. Leading to an idle HT cpu. b) On a hypothetial 2 socket NHM-EX system (each socket having 8 cores and 16 logical threads), 16 cpu-hogging tasks can get scheduled as 9 on one socket and 7 on another socket. Leaving one core in a socket idle whereas in another socket we have a core having both its HT siblings busy. While this issue can be fixed by decreasing the domain's imbalance_pct (by making it a function of number of logical cpus in the domain), it can potentially cause more task migrations across sched groups in an overloaded case. Fix this by using imbalance_pct only during newly_idle and busy load balancing. And during idle load balancing, check if there is an imbalance in number of idle cpu's across the busiest and this sched_group or if the busiest group has more tasks than its weight that the idle cpu in this_group can pull. Reported-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1284760952.2676.11.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-11perf_events: Fix time tracking in samplesStephane Eranian1-0/+10
This patch corrects time tracking in samples. Without this patch both time_enabled and time_running are bogus when user asks for PERF_SAMPLE_READ. One uses PERF_SAMPLE_READ to sample the values of other counters in each sample. Because of multiplexing, it is necessary to know both time_enabled, time_running to be able to scale counts correctly. In this second version of the patch, we maintain a shadow copy of ctx->time which allows us to compute ctx->time without calling update_context_time() from NMI context. We avoid the issue that update_context_time() must always be called with ctx->lock held. We do not keep shadow copies of the other event timings because if the lead event is overflowing then it is active and thus it's been scheduled in via event_sched_in() in which case neither tstamp_stopped, tstamp_running can be modified. This timing logic only applies to samples when PERF_SAMPLE_READ is used. Note that this patch does not address timing issues related to sampling inheritance between tasks. This will be addressed in a future patch. With this patch, the libpfm4 example task_smpl now reports correct counts (shown on 2.4GHz Core 2): $ task_smpl -p 2400000000 -e unhalted_core_cycles:u,instructions_retired:u,baclears noploop 5 noploop for 5 seconds IIP:0x000000004006d6 PID:5596 TID:5596 TIME:466,210,211,430 STREAM_ID:33 PERIOD:2,400,000,000 ENA=1,010,157,814 RUN=1,010,157,814 NR=3 2,400,000,254 unhalted_core_cycles:u (33) 2,399,273,744 instructions_retired:u (34) 53,340 baclears (35) Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4cc6e14b.1e07e30a.256e.5190@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-10ASoC: Remove broken WM8350 direction constantsMark Brown1-3/+0
The WM8350 driver was using some custom constants to interpret the direction of the MCLK signal which had the opposite values to those used as standard by the ASoC core, causing confusion in machine drivers such as the 1133-EV1 board. Reported-by: Tommy Zhu <Tommy.Zhu@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-10block: remove REQ_HARDBARRIERChristoph Hellwig3-10/+3
REQ_HARDBARRIER is dead now, so remove the leftovers. What's left at this point is: - various checks inside the block layer. - sanity checks in bio based drivers. - now unused bio_empty_barrier helper. - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while, but Xen really needs to sort out it's barrier situaton. - setting of ordered tags in uas - dead code copied from old scsi drivers. - scsi different retry for barriers - it's dead and should have been removed when flushes were converted to FS requests. - blktrace handling of barriers - removed. Someone who knows blktrace better should add support for REQ_FLUSH and REQ_FUA, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10Merge branch 'for-2.6.37/drivers' into for-linusJens Axboe1-1/+1
Conflicts: drivers/block/cciss.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10hrtimer: Remove stale comment on curr_timerYong Zhang1-1/+0
curr_timer doesn't resident in struct hrtimer_cpu_base anymore. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> LKML-Reference: <1287892253-2587-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-10mmc, sh: Move constants to sh_mmcif.hSimon Horman1-5/+34
This moves some constants from sh_mmcif.c to sh_mmcif.h so that they can be used in sh_mmcif_boot_init(). It also alters the definition of SOFT_RST_OFF from (0 << 31) to ~SOFT_RST_ON (= ~(1 << 31)). The former seems bogus. The latter is consistent with the code in sh_mmcif_boot_init(). Cc: Yusuke Goda <yusuke.goda.sx@renesas.com> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10irq: Better struct irqaction layoutEric Dumazet1-3/+3
We currently use kmalloc-96 slab for struct irqaction allocations on 64bit arches. This is unfortunate because of possible false sharing and two cache lines accesses. Move 'name' and 'dir' fields at the end of the structure, and force a suitable alignement. Hot path fields now use one cache line on x86_64. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1288865628.2659.69.camel@edumazet-laptop> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-10Merge branch 'viafb-next' of git://github.com/schandinat/linux-2.6Paul Mundt1-0/+15
2010-11-10tty: Fix formatting in tty.hAlan Cox1-1/+1
Someone added a new ldisc number and messed up the tabbing. Fix it before anyone else copies it. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-10kernel: add roundup() code comment from akpmJames Morris1-0/+2
Add roundup() code comment from akpm. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
2010-11-09ceph: explicitly specify page alignment in network messagesSage Weil1-0/+1
The alignment used for reading data into or out of pages used to be taken from the data_off field in the message header. This only worked as long as the page alignment matched the object offset, breaking direct io to non-page aligned offsets. Instead, explicitly specify the page alignment next to the page vector in the ceph_msg struct, and use that instead of the message header (which probably shouldn't be trusted). The alloc_msg callback is responsible for filling in this field properly when it sets up the page vector. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09ceph: make page alignment explicit in osd interfaceSage Weil1-2/+5
We used to infer alignment of IOs within a page based on the file offset, which assumed they matched. This broke with direct IO that was not aligned to pages (e.g., 512-byte aligned IO). We were also trusting the alignment specified in the OSD reply, which could have been adjusted by the server. Explicitly specify the page alignment when setting up OSD IO requests. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09ceph: fix comment, remove extraneous argsSage Weil1-2/+1
The offset/length arguments aren't used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09OMAP: I2C: split device registration and convert OMAP2+ to omap_devicePaul Walmsley1-0/+5
Split the OMAP1 and OMAP2+ platform_device build and register code. Convert the OMAP2+ variant to use omap_device. This patch was developed in collaboration with Rajendra Nayak <rnayak@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-09Merge branch 'musb-v2.6.37-rc2' of git://gitorious.org/usb/usb into work-linusGreg Kroah-Hartman1-0/+2
2010-11-09viafb: General power management infrastructureDaniel Drake1-0/+15
Multiple devices need S/R hooks (framebuffer, GPIO, camera). Add infrastructure and convert existing framebuffer code to the new model. This patch should create no functional change. Based on earlier work by Jonathan Corbet. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-11-09mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platformsJacob Pan1-0/+1
SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown specific quirk, the default pci_probe will be called and crash the kernel. This patch unblocks the crash problem on C0 by using the same probing function as HC1, which limits the number of slots to one. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-09x86/mrst: Add SFI platform device parsing codeFeng Tang1-3/+5
SFI provides a series of tables. These describe the platform devices present including SPI and I²C devices, as well as various sensors, keypads and other glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c) This patch is a merge of the core elements and relevant fixes from the Intel development code by Feng, Alek, myself into a single coherent patch for upstream submission. It provides the needed infrastructure to register I2C, SPI and platform devices described by the tables, as well as handlers for some of the hardware already supported in kernel. The 0.8 firmware also provides GPIO tables. Devices are created at boot time or if they are SCU dependant at the point an SCU is discovered. The existing Linux device mechanisms will then handle the device binding. At an abstract level this is an SFI to Linux device translator. Device/platform specific setup/glue is in this file. This is done so that the drivers for the generic I²C and SPI bus devices remain cross platform as they should. (Updated from RFC version to correct the emc1403 name used by the firmware and a wrongly used #define) Signed-off-by: Alek Du <alek.du@linux.intel.com> LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain> [Clean ups, removal of 0.7 support] Signed-off-by: Feng Tang <feng.tang@linux.intel.com> [Clean ups] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-09sh: intc: Fix up initializers for gcc 4.5.Paul Mundt1-1/+1
The _INTC_ARRAY() initializer presently does a NULL test which blows up as a non-constant initializer under gcc 4.5. This switches over to a type test to account for NULL initializers explicitly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-09kernel: Constify temporary variable in roundup()Tetsuo Handa1-1/+1
Fix build error with GCC 3.x caused by commit b28efd54 "kernel: roundup should only reference arguments once" by constifying temporary variable used in that macro. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-11-09decnet: RCU conversion and get rid of dev_base_lockEric Dumazet1-1/+1
While tracking dev_base_lock users, I found decnet used it in dnet_select_source(), but for a wrong purpose: Writers only hold RTNL, not dev_base_lock, so readers must use RCU if they cannot use RTNL. Adds an rcu_head in struct dn_ifaddr and handle proper RCU management. Adds __rcu annotation in dn_route as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08Merge branch 'master' of ↵David S. Miller1-0/+5
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-11-08usb.h: fix ioctl kernel-doc infoRandy Dunlap1-1/+1
Fix struct field name, prevent kernel-doc warnings. Warning(include/linux/usb.h:865): No description found for parameter 'unlocked_ioctl' Warning(include/linux/usb.h:865): Excess struct/union/enum/typedef member 'ioctl' description in 'usb_driver' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-08net: Detect and ignore netif_stop_queue() calls before register_netdev()Guillaume Chazarain1-0/+5
After e6484930d7c73d324bccda7d43d131088da697b9: net: allocate tx queues in register_netdevice These calls make net drivers oops at load time, so let's avoid people git-bisect'ing known problems. Signed-off-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds2-10/+9
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: sh_mmcif: Convert extern inline to static inline. ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. ARM: mach-shmobile: fix sh7372 after a recent clock framework rework ARM: mach-shmobile: include drivers/sh/Kconfig ARM: mach-shmobile: ap4evb: Add HDMI sound support ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support ARM: shmobile: remove sh_timer_config clk member
2010-11-08Merge branch 'rmobile/core' into rmobile-fixes-for-linusPaul Mundt2-10/+9
2010-11-08Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and ↵Paul Mundt1-0/+4
'sh/intc-extension' into sh-fixes-for-linus
2010-11-08sh: add clk_round_parent() to optimize parent clock rateGuennadi Liakhovetski1-0/+4
Sometimes it is possible and reasonable to adjust the parent clock rate to improve precision of the child clock, e.g., if the child clock has no siblings. clk_round_parent() is a new addition to the SH clock-framework API, that implements such an optimization for child clocks with divisors, taking all integer values in a range. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-06slub tracing: move trace calls out of always inlined functions to reduce ↵Richard Kennedy1-29/+26
kernel code size Having the trace calls defined in the always inlined kmalloc functions in include/linux/slub_def.h causes a lot of code duplication as the trace functions get instantiated for each kamalloc call site. This can simply be removed by pushing the trace calls down into the functions in slub.c. On my x86_64 built this patch shrinks the code size of the kernel by approx 36K and also shrinks the code size of many modules -- too many to list here ;) size vmlinux (2.6.36) reports text data bss dec hex filename 5410611 743172 828928 6982711 6a8c37 vmlinux 5373738 744244 828928 6946910 6a005e vmlinux + patch The resulting kernel has had some testing & kmalloc trace still seems to work. This patch - moves trace_kmalloc out of the inlined kmalloc() and pushes it down into kmem_cache_alloc_trace() so this it only get instantiated once. - rename kmem_cache_alloc_notrace() to kmem_cache_alloc_trace() to indicate that now is does have tracing. (maybe this would better being called something like kmalloc_kmem_cache ?) - adds a new function kmalloc_order() to handle allocation and tracing of large allocations of page order. - removes tracing from the inlined kmalloc_large() replacing them with a call to kmalloc_order(); - move tracing out of inlined kmalloc_node() and pushing it down into kmem_cache_alloc_node_trace - rename kmem_cache_alloc_node_notrace() to kmem_cache_alloc_node_trace() - removes the include of trace/events/kmem.h from slub_def.h. v2 - keep kmalloc_order_trace inline when !CONFIG_TRACE Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2010-11-05USB: musb: blackfin: push clkin value to platform resourcesBob Liu1-0/+2
In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-04mmc: sh_mmcif: Convert extern inline to static inline.Paul Mundt1-9/+9
Presently the extern inline case results in a compiler warning on ARM due to the memory barrier definition used in the I/O routines. These ultimately all want to be static inline anyways, so just convert them all in place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-03Input: export input_reset_device() for use in KGDBDmitry Torokhov1-1/+3
KGDB, much like the resume process, needs to be able to mark all keys that were pressed at the time we dropped into the debuggers as "released", since it is unlikely that the keys stay pressed for the entire duration of the debug session. Also we need to make sure that input_reset_device() and input_dev_suspend() only attempt to change state of currenlt opened devices since closed devices may not be ready to accept IO requests. Tested-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: adp5588-keys - unify common header definesMichael Hennerich1-1/+14
Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03nfsd4: fix 4.1 connection registration raceJ. Bruce Fields1-4/+14
If a connection is closed just after a sequence or create_session is sent over it, we could end up trying to register a callback that will never get called since the xprt is already marked dead. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-11-02preempt: fix kernel build with !CONFIG_BKLArnd Bergmann1-2/+6
The preempt count logic tries to take the BKL into account, which breaks when CONFIG_BKL is not set. Use the same preempt_count offset that we use without CONFIG_PREEMPT when CONFIG_BKL is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-and-tested-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König3-3/+3
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-0/+3
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
2010-11-01of/net: Move of_get_mac_address() to a common source file.David Daney1-0/+15
There are two identical implementations of of_get_mac_address(), one each in arch/powerpc/kernel/prom_parse.c and arch/microblaze/kernel/prom_parse.c. Move this function to a new common file of_net.{c,h} and adjust all the callers to include the new header. Signed-off-by: David Daney <ddaney@caviumnetworks.com> [grant.likely@secretlab.ca: protect header with #ifdef] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-01Merge branch 'i2c-for-linus' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllers i2c-i801: Handle multiple instances instead of keeping global state i2c-i801: Add Intel Patsburg device ID i2c: Drop unused I2C_CLASS_TV flags
2010-11-01Merge branches 'irq-core-for-linus' and 'core-locking-for-linus' of ↵Linus Torvalds3-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix up irq_node() for irq_data changes. genirq: Add single IRQ reservation helper genirq: Warn if enable_irq is called before irq is set up * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Remove mutex emulation staging: Final semaphore cleanup jbd2: Convert jbd2_slab_create_sem to mutex hpfs: Convert sbi->hpfs_creation_de to mutex Fix up trivial change/delete conflicts with deleted 'dream' drivers (drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
2010-10-31i2c-i801: Add Intel Patsburg device IDSeth Heasley1-0/+1
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c: Drop unused I2C_CLASS_TV flagsJean Delvare1-2/+0
There are no users left for I2C_CLASS_TV_ANALOG and I2C_CLASS_TV_DIGITAL, so we can get rid of them. Signed-off-by: Jean Delvare <khali@linux-fr.org>