summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2010-12-08nl80211/mac80211: Report signal averageBruno Randolf1-0/+2
Extend nl80211 to report an exponential weighted moving average (EWMA) of the signal value. Since the signal value usually fluctuates between different packets, an average can be more useful than the value of the last packet. This uses the recently added generic EWMA library function. -- v2: fix ABI breakage and change factor to be a power of 2. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07fuse: fix ioctl ABIMiklos Szeredi1-0/+10
In kernel ABI version 7.16 and later FUSE_IOCTL_RETRY reply from a unrestricted IOCTL request shall return with an array of 'struct fuse_ioctl_iovec' instead of 'struct iovec'. This fixes the ABI ambiguity of 32bit vs. 64bit. Reported-by: "ccmail111" <ccmail111@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org>
2010-12-07fuse: allow batching of FORGET requestsMiklos Szeredi1-1/+15
Terje Malmedal reports that a fuse filesystem with 32 million inodes on a machine with lots of memory can take up to 30 minutes to process FORGET requests when all those inodes are evicted from the icache. To solve this, create a BATCH_FORGET request that allows up to about 8000 FORGET requests to be sent in a single message. This request is only sent if userspace supports interface version 7.16 or later, otherwise fall back to sending individual FORGET messages. Reported-by: Terje Malmedal <terje.malmedal@usit.uio.no> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-12-07Staging: Merge 2.6.37-rc5 into staging-nextGreg Kroah-Hartman34-94/+85
This was done to handle a number of conflicts in the batman-adv and winbond drivers properly. It also now allows us to fix up the sysfs attributes properly that were not in the .37 release due to them being only in this tree at the time. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-07dccp: Policy-based packet dequeueing infrastructureTomasz Grobelny1-0/+21
This patch adds a generic infrastructure for policy-based dequeueing of TX packets and provides two policies: * a simple FIFO policy (which is the default) and * a priority based policy (set via socket options). Both policies honour the tx_qlen sysctl for the maximum size of the write queue (can be overridden via socket options). The priority policy uses skb->priority internally to assign an u32 priority identifier, using the same ranking as SO_PRIORITY. The skb->priority field is set to 0 when the packet leaves DCCP. The priority is supplied as ancillary data using cmsg(3), the patch also provides the requisite parsing routines. Signed-off-by: Tomasz Grobelny <tomasz@grobelny.oswiecenia.net> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-12-07Merge branch 'perf/core' of ↵Ingo Molnar1-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2010-12-07Merge commit 'v2.6.37-rc5' into perf/coreIngo Molnar21-58/+52
Merge reason: Pick up the latest -rc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-07Input: add input driver for polled GPIO buttonsGabor Juhos1-0/+2
The existing gpio-keys driver can be usable only for GPIO lines with interrupt support. Several devices have buttons connected to a GPIO line which is not capable to generate interrupts. This patch adds a new input driver using the generic GPIO layer and the input-polldev to support such buttons. [Ben Gardiner <bengardiner@nanometrics.ca: fold code to use more of the original gpio_keys infrastructure; cleanups and other improvements.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-07Merge branch 'pm-fixes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix memory corruption related to swap PM / Hibernate: Use async I/O when reading compressed hibernation image
2010-12-07PM / Hibernate: Fix memory corruption related to swapRafael J. Wysocki1-2/+2
There is a problem that swap pages allocated before the creation of a hibernation image can be released and used for storing the contents of different memory pages while the image is being saved. Since the kernel stored in the image doesn't know of that, it causes memory corruption to occur after resume from hibernation, especially on systems with relatively small RAM that need to swap often. This issue can be addressed by keeping the GFP_IOFS bits clear in gfp_allowed_mask during the entire hibernation, including the saving of the image, until the system is finally turned off or the hibernation is aborted. Unfortunately, for this purpose it's necessary to rework the way in which the hibernate and suspend code manipulates gfp_allowed_mask. This change is based on an earlier patch from Hugh Dickins. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org
2010-12-07cfg80211/mac80211: add mesh join/leave commandsJohannes Berg1-0/+8
Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07nl80211/mac80211: define and allow configuring mesh element TTLJavier Cardona1-0/+4
The TTL in path selection information elements is different from the mesh ttl used in mesh data frames. Version 7.03 of the 11s draft calls this ttl 'Element TTL'. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06__in_dev_get_rtnl() can use rtnl_dereference()Eric Dumazet1-1/+1
If caller holds RTNL, we dont need a memory barrier (smp_read_barrier_depends) included in rcu_dereference(). Just use rtnl_dereference() to properly document the assertions. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06filter: add SKF_AD_RXHASH and SKF_AD_CPUEric Dumazet1-1/+3
Add SKF_AD_RXHASH and SKF_AD_CPU to filter ancillary mechanism, to be able to build advanced filters. This can help spreading packets on several sockets with a fast selection, after RPS dispatch to N cpus for example, or to catch a percentage of flows in one queue. tcpdump -s 500 "cpu = 1" : [0] ld CPU [1] jeq #1 jt 2 jf 3 [2] ret #500 [3] ret #0 # take 12.5 % of flows (average) tcpdump -s 1000 "rxhash & 7 = 2" : [0] ld RXHASH [1] and #7 [2] jeq #2 jt 3 jf 4 [3] ret #1000 [4] ret #0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Rui <wirelesser@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06usbnet: changes for upcoming cdc_ncm driverAlexey Orishko1-0/+6
Changes: include/linux/usb/usbnet.h: - a new flag to indicate driver's capability to accumulate IP packets in Tx direction and extract several packets from single skb in Rx direction. drivers/net/usb/usbnet.c: - the procedure of counting packets in usbnet was updated due to the accumulating of IP packets in the driver - no short packets are sent if indicated by the flag in driver_info structure Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06lib: Improve EWMA efficiency by using bitshiftsBruno Randolf1-3/+1
Using bitshifts instead of division and multiplication should improve performance. That requires weight and factor to be powers of two, but i think this is something we can live with. Thanks to Peter Zijlstra for the improved formula! Signed-off-by: Bruno Randolf <br1@einfach.org> -- v2: use log2.h functions Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06Merge branch 'master' of ↵John W. Linville3-5/+64
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-12-06tg3: Move EEE definitions into mdio.hMatt Carlson1-0/+5
In commit 52b02d04c801fff51ca49ad033210846d1713253 entitled "tg3: Add EEE support", Ben Hutchings had commented that the EEE advertisement register will be in a standard location. This patch moves that definition into mdio.h and changes the code to use it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06kprobes: Use text_poke_smp_batch for unoptimizingMasami Hiramatsu1-0/+2
Use text_poke_smp_batch() on unoptimization path for reducing the number of stop_machine() issues. If the number of unoptimizing probes is more than MAX_OPTIMIZE_PROBES(=256), kprobes unoptimizes first MAX_OPTIMIZE_PROBES probes and kicks optimizer for remaining probes. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20101203095434.2961.22657.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-06kprobes: Use text_poke_smp_batch for optimizingMasami Hiramatsu1-1/+1
Use text_poke_smp_batch() in optimization path for reducing the number of stop_machine() issues. If the number of optimizing probes is more than MAX_OPTIMIZE_PROBES(=256), kprobes optimizes first MAX_OPTIMIZE_PROBES probes and kicks optimizer for remaining probes. Changes in v5: - Use kick_kprobe_optimizer() instead of directly calling schedule_delayed_work(). - Rescheduling optimizer outside of kprobe mutex lock. Changes in v2: - Allocate code buffer and parameters in arch_init_kprobes() instead of using static arraies. - Merge previous max optimization limit patch into this patch. So, this patch introduces upper limit of optimization at once. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20101203095428.2961.8994.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-06Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-1/+1
Conflicts: include/linux/mfd/wm8994/pdata.h
2010-12-06ASoC: Fix off by one error in WM8994 EQ register bank sizeUk Kim1-1/+1
Signed-off-by: Uk Kim <w0806.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-05perf events: Make sample_type identity fields available in all PERF_RECORD_ ↵Arnaldo Carvalho de Melo1-1/+11
events If perf_event_attr.sample_id_all is set it will add the PERF_SAMPLE_ identity info: TID, TIME, ID, CPU, STREAM_ID As a trailer, so that older perf tools can process new files, just ignoring the extra payload. With this its possible to do further analysis on problems in the event stream, like detecting reordering of MMAP and FORK events, etc. V2: Fixup header size in comm, mmap and task processing, as we have to take into account different sample_types for each matching event, noticed by Thomas Gleixner. Thomas also noticed a problem in v2 where if we didn't had space in the buffer we wouldn't restore the header size. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-05perf events: Separate the routines handling the PERF_SAMPLE_ identity fieldsArnaldo Carvalho de Melo1-0/+1
Those will be made available in sample like events like MMAP, EXEC, etc in a followup patch. So precalculate the extra id header space and have a separate routine to fill them up. V2: Thomas noticed that the id header needs to be precalculated at inherit_events too: LKML-Reference: <alpine.LFD.2.00.1012031245220.2653@localhost6.localdomain6> Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1291318772-30880-2-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-03mtd: FSMC NAND fix obvious speling errorsLinus Walleij1-3/+3
Fix spelling in the interface file. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03mtd: FSMC NAND use the PrimeCell identifier macrosLinus Walleij1-19/+0
The FSMC actually has a standard ARM PrimeCell ID register, and the "revision" part of that register contains the thing that the code is looking at. Reuse the infrastructure from the AMBA bus abstraction and rid local defines. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03mtd: fix master device identification for mtd repartitionRoman Tereshonkov1-1/+1
Function mtd_has_master renamed as mtd_is_partition to follow the function logic. The patch fixes the problem of checking the right mtd device for partition creation. To delete partition checking is not needed here so as it is done in mtd_del_partition. By master we consider the mtd device which does not belong to any partition. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03mtd: fix nand kernel-doc warningsRandy Dunlap1-0/+2
Warning(include/linux/mtd/nand.h:543): No description found for parameter 'badblockbits' Warning(drivers/mtd/nand/nand_bbt.c:1101): No description found for parameter 'mtd' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03mtd: cfi_fixup: remove unused 'param' parameterGuillaume LECERF1-2/+1
The 'param' parameter has never been used since its introduction, so simply remove it. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03mtd: fsmc.h: including linux/io.h for definition of readlViresh Kumar1-0/+1
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03mtd: onenand: add option and variable for cache program featureRoman Tereshonkov1-0/+12
A new option is added for cache program feature. A new variable ongoing is introduced for onenand_chip to handle the multi-command cache program operation. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03tracing: Add TRACE_EVENT_CONDITIONAL()Steven Rostedt1-6/+23
There are instances in the kernel that we only want to trace a tracepoint when a certain condition is set. But we do not want to test for that condition in the core kernel. If we test for that condition before calling the tracepoin, then we will be performing that test even when tracing is not enabled. This is 99.99% of the time. We currently can just filter out on that condition, but that happens after we write to the trace buffer. We just wasted time writing to the ring buffer for an event we never cared about. This patch adds: TRACE_EVENT_CONDITION() and DEFINE_EVENT_CONDITION() These have a new TP_CONDITION() argument that comes right after the TP_ARGS(). This condition can use the parameters of TP_ARGS() in the TRACE_EVENT() to determine if the tracepoint should be traced or not. The TP_CONDITION() will be placed in a if (cond) trace; For example, for the tracepoint sched_wakeup, it is useless to trace a wakeup event where the caller never actually wakes anything up (where success == 0). So adding: TP_CONDITION(success), which uses the "success" parameter of the wakeup tracepoint will have it only trace when we have successfully woken up a task. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-12-03include: Install linux/if_alg.h for user-space crypto APIMiloslav Trmač1-0/+1
Signed-off-by: Miloslav Trmač <mitr@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-03timers: Introduce timerlist infrastructure.John Stultz1-0/+37
The timerlist infrastructure is a thin layer over the rbtree code that implements a simple list of timers sorted by an expires value, and a getnext function that provides a pointer to the earliest timer. This infrastructure allows drivers and other kernel infrastructure to easily implement timers without duplicating code. Signed-off-by: John Stultz <john.stultz@linaro.org> LKML Reference: <1290136329-18291-2-git-send-email-john.stultz@linaro.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Richard Cochran <richardcochran@gmail.com>
2010-12-03Merge branch 'drm-intel-fixes' into drm-intel-nextChris Wilson20-68/+64
Conflicts: drivers/gpu/drm/i915/intel_drv.h
2010-12-03mem-hotplug: introduce {un}lock_memory_hotplug()KOSAKI Motohiro1-0/+6
Presently hwpoison is using lock_system_sleep() to prevent a race with memory hotplug. However lock_system_sleep() is a no-op if CONFIG_HIBERNATION=n. Therefore we need a new lock. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Suggested-by: Hugh Dickins <hughd@google.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-03vmalloc: eagerly clear ptes on vunmapJeremy Fitzhardinge1-2/+0
On stock 2.6.37-rc4, running: # mount lilith:/export /mnt/lilith # find /mnt/lilith/ -type f -print0 | xargs -0 file crashes the machine fairly quickly under Xen. Often it results in oops messages, but the couple of times I tried just now, it just hung quietly and made Xen print some rude messages: (XEN) mm.c:2389:d80 Bad type (saw 7400000000000001 != exp 3000000000000000) for mfn 1d7058 (pfn 18fa7) (XEN) mm.c:964:d80 Attempt to create linear p.t. with write perms (XEN) mm.c:2389:d80 Bad type (saw 7400000000000010 != exp 1000000000000000) for mfn 1d2e04 (pfn 1d1fb) (XEN) mm.c:2965:d80 Error while pinning mfn 1d2e04 Which means the domain tried to map a pagetable page RW, which would allow it to map arbitrary memory, so Xen stopped it. This is because vm_unmap_ram() left some pages mapped in the vmalloc area after NFS had finished with them, and those pages got recycled as pagetable pages while still having these RW aliases. Removing those mappings immediately removes the Xen-visible aliases, and so it has no problem with those pages being reused as pagetable pages. Deferring the TLB flush doesn't upset Xen because it can flush the TLB itself as needed to maintain its invariants. When unmapping a region in the vmalloc space, clear the ptes immediately. There's no point in deferring this because there's no amortization benefit. The TLBs are left dirty, and they are flushed lazily to amortize the cost of the IPIs. This specific motivation for this patch is an oops-causing regression since 2.6.36 when using NFS under Xen, triggered by the NFS client's use of vm_map_ram() introduced in 56e4ebf877b60 ("NFS: readdir with vmapped pages") . XFS also uses vm_map_ram() and could cause similar problems. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Bryan Schumaker <bjschuma@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Alex Elder <aelder@sgi.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-03Merge branch 'smack-next-master' into nextJames Morris1-0/+2
2010-12-02Merge branch 'driver-core-linus' of ↵Linus Torvalds3-11/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: uio: Change mail address of Hans J. Koch driver core: prune docs about device_interface driver core: the development tree has switched to git
2010-12-02Merge branch 'tty-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: mfd: adjust the baud rate setting TTY: open/hangup race fixup TTY: don't allow reopen when ldisc is changing NET: wan/x25, fix ldisc->open retval TTY: ldisc, fix open flag handling serial8250: Mark console as CON_ANYTIME
2010-12-02Merge branch 'usb-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fix autosuspend bug in usb-serial USB: ehci: disable LPM and PPCD for nVidia MCP89 chips USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added USB: yurex: add .llseek fop to file_operations USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable usb: musb: do not use dma for control transfers usb: musb: gadget: fix compilation warning usb: musb: clear RXCSR_AUTOCLEAR before PIO read usb: musb: unmap dma buffer when switching to PIO xhci: Don't let the USB core disable SuperSpeed ports. xhci: Setup array of USB 2.0 and USB 3.0 ports. xhci: Fix reset-device and configure-endpoint commands
2010-12-02ssb: extract indexes for power tablesRafał Miłecki2-0/+44
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02spi/pxa2xx: Add chipselect support for SodavilleSebastian Andrzej Siewior1-0/+2
The SPI core on Sodaville supports chip selects. Its configuration moved into the SSSR register at bit 0 and 1. Thus Sodaville can be hooked up with up to 4 devices. This patch ensures that the bits which are otherwiese reserved are only touched on Sodaville and not on any other PXAs. Also it makes sure that the status register does not lose the CS information while clearing the ROR bit. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-02NFS: Fix a memory leak in nfs_readdirTrond Myklebust1-0/+1
We need to ensure that the entries in the nfs_cache_array get cleared when the page is removed from the page cache. To do so, we use the freepage address_space operation. Change nfs_readdir_clear_array to use kmap_atomic(), so that the function can be safely called from all contexts. Finally, modify the cache_page_release helper to call nfs_readdir_clear_array directly, when dealing with an anonymous page from 'uncached_readdir'. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-02Call the filesystem back whenever a page is removed from the page cacheLinus Torvalds1-0/+1
NFS needs to be able to release objects that are stored in the page cache once the page itself is no longer visible from the page cache. This patch adds a callback to the address space operations that allows filesystems to perform page cleanups once the page has been removed from the page cache. Original patch by: Linus Torvalds <torvalds@linux-foundation.org> [trondmy: cover the cases of invalidate_inode_pages2() and truncate_inode_pages()] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-02This patch adds a new security attribute to Smack calledCasey Schaufler1-0/+2
SMACK64EXEC. It defines label that is used while task is running. Exception: in smack_task_wait() child task is checked for write access to parent task using label inherited from the task that forked it. Fixed issues from previous submit: - SMACK64EXEC was not read when SMACK64 was not set. - inode security blob was not updated after setting SMACK64EXEC - inode security blob was not updated when removing SMACK64EXEC
2010-12-02ASoC: Tune performance of WM8958 revision AMark Brown1-0/+9
Update some of the default configuration for the device to improve the performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-01net sched: use xps information for qdisc NUMA affinityEric Dumazet1-1/+19
Allocate qdisc memory according to NUMA properties of cpus included in xps map. To be effective, qdisc should be (re)setup after changes of /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus I added a numa_node field in struct netdev_queue, containing NUMA node if all cpus included in xps_cpus share same node, else -1. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01spi/pxa2xx: Consider CE4100's FIFO depthSebastian Andrzej Siewior1-6/+26
For PXA the default threshold is FIFO_DEPTH / 2. Adjust this value for CE4100. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01spi/pxa2xx: Add CE4100 supportSebastian Andrzej Siewior1-1/+104
Sodaville's SPI controller is very much the same as in PXA25x. The difference: - The RX/TX FIFO is only 4 words deep instead of 16 - No DMA support - The SPI controller offers a CS functionality Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>