summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2011-01-06NFS rename client back channel transport fieldAndy Adamson2-3/+3
Differentiate from server backchannel Signed-off-by: Andy Adamson <andros@netapp.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06NFS add session back channel drainingAndy Adamson1-1/+1
Currently session draining only drains the fore channel. The back channel processing must also be drained. Use the back channel highest_slot_used to indicate that a callback is being processed by the callback thread. Move the session complete to be per channel. When the session is draininig, wait for any current back channel processing to complete and stop all new back channel processing by returning NFS4ERR_DELAY to the back channel client. Drain the back channel, then the fore channel. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06NFS refactor nfs_find_client and reference client across callback processingAndy Adamson1-0/+13
Fixes a bug where the nfs_client could be freed during callback processing. Refactor nfs_find_client to use minorversion specific means to locate the correct nfs_client structure. In the NFS layer, V4.0 clients are found using the callback_ident field in the CB_COMPOUND header. V4.1 clients are found using the sessionID in the CB_SEQUENCE operation which is also compared against the sessionID associated with the back channel thread after a successful CREATE_SESSION. Each of these methods finds the one an only nfs_client associated with the incoming callback request - so nfs_find_client_next is not needed. In the RPC layer, the pg_authenticate call needs to find the nfs_client. For the v4.0 callback service, the callback identifier has not been decoded so a search by address, version, and minorversion is used. The sessionid for the sessions based callback service has (usually) not been set for the pg_authenticate on a CB_NULL call which can be sent prior to the return of a CREATE_SESSION call, so the sessionid associated with the back channel thread is not used to find the client in pg_authenticate for CB_NULL calls. Pass the referenced nfs_client to each CB_COMPOUND operation being proceesed via the new cb_process_state structure. The reference is held across cb_compound processing. Use the new cb_process_state struct to move the NFS4ERR_RETRY_UNCACHED_REP processing from process_op into nfs4_callback_sequence where it belongs. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06NFS associate sessionid with callback connectionAndy Adamson1-0/+1
The sessions based callback service is started prior to the CREATE_SESSION call so that it can handle CB_NULL requests which can be sent before the CREATE_SESSION call returns and the session ID is known. Set the callback sessionid after a sucessful CREATE_SESSION. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06NFS implement v4.0 callback_identAndy Adamson1-0/+1
Use the small id to pointer translator service to provide a unique callback identifier per SETCLIENTID call used to identify the v4.0 callback service associated with the clientid. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06SUNRPC register and unregister the back channel transportAndy Adamson1-1/+0
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06SUNRPC new transport for the NFSv4.1 shared back channelAndy Adamson1-0/+1
Move the current sock create and destroy routines into the new transport ops. Back channel socket will be destroyed by the svc_closs_all call in svc_destroy. Added check: only TCP supported on shared back channel. Signed-off-by: Andy Adamson <andros@netapp.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06net: remove the duplicate #ifdef __KERNEL__Changli Gao1-6/+2
Since we are already in #ifdef __KERNEL__, we don't need to check it again. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', ↵Linus Torvalds1-3/+3
'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, asm: Use fxsaveq/fxrestorq in more places * 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hwmon: Add core threshold notification to therm_throt.c * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, paravirt: Use native_halt on a halt, not native_safe_halt * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: locking, lockdep: Convert sprintf_symbol to %pS * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: Better struct irqaction layout
2011-01-06include/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local ↵Henry Ptasinski1-0/+1
tunnel Ethertype used by HPNA control protocols (LARQ, rate, link, etc) and by Broadcom wlan drivers for local signalling. Signed-off-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06Merge branch 'x86-security-for-linus' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: module: Move RO/NX module protection to after ftrace module update x86: Resume trampoline must be executable x86: Add RO/NX protection for loadable kernel modules x86: Add NX protection for kernel data x86: Fix improper large page preservation
2011-01-06Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, earlyprintk: Move mrst early console to platform/ and fix a typo x86, apbt: Setup affinity for apb timers acting as per-cpu timer ce4100: Add errata fixes for UART on CE4100 x86: platform: Move iris to x86/platform where it belongs x86, mrst: Check platform_device_register() return code x86/platform: Add Eurobraille/Iris power off support x86, mrst: Add explanation for using 1960 as the year offset for vrtc x86, mrst: Fix dependencies of "select INTEL_SCU_IPC" x86, mrst: The shutdown for MRST requires the SCU IPC mechanism x86: Ce4100: Add reboot_fixup() for CE4100 ce4100: Add PCI register emulation for CE4100 x86: Add CE4100 platform support x86: mrst: Set vRTC's IRQ to level trigger type x86: mrst: Add audio driver bindings rtc: Add drivers/rtc/rtc-mrst.c x86: mrst: Add vrtc driver which serves as a wall clock device x86: mrst: Add Moorestown specific reboot/shutdown support x86: mrst: Parse SFI timer table for all timer configs x86/mrst: Add SFI platform device parsing code
2011-01-06Merge branch 'timers-for-linus' of ↵Linus Torvalds4-21/+102
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: MAINTAINERS: Update timer related entries timers: Use this_cpu_read timerqueue: Make timerqueue_getnext() static inline hrtimer: fix timerqueue conversion flub hrtimers: Convert hrtimers to use timerlist infrastructure timers: Fixup allmodconfig build issue timers: Rename timerlist infrastructure to timerqueue timers: Introduce timerlist infrastructure. hrtimer: Remove stale comment on curr_timer timer: Warn when del_timer_sync() is called in hardirq context timer: Del_timer_sync() can be used in softirq context timer: Make try_to_del_timer_sync() the same on SMP and UP posix-timers: Annotate lock_timer() timer: Permit statically-declared work with deferrable timers time: Use ARRAY_SIZE macro in timecompare.c timer: Initialize the field slack of timer_list timer_list: Remove alignment padding on 64 bit when CONFIG_TIMER_STATS time: Compensate for rounding on odd-frequency clocksources Fix up trivial conflict in MAINTAINERS
2011-01-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds4-12/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) sched: Change wait_for_completion_*_timeout() to return a signed long sched, autogroup: Fix reference leak sched, autogroup: Fix potential access to freed memory sched: Remove redundant CONFIG_CGROUP_SCHED ifdef sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight sched: Move periodic share updates to entity_tick() printk: Use this_cpu_{read|write} api on printk_pending sched: Make pushable_tasks CONFIG_SMP dependant sched: Add 'autogroup' scheduling feature: automated per session task groups sched: Fix unregister_fair_sched_group() sched: Remove unused argument dest_cpu to migrate_task() mutexes, sched: Introduce arch_mutex_cpu_relax() sched: Add some clock info to sched_debug cpu: Remove incorrect BUG_ON cpu: Remove unused variable sched: Fix UP build breakage sched: Make task dump print all 15 chars of proc comm sched: Update tg->shares after cpu.shares write sched: Allow update_cfs_load() to update global load sched: Implement demand based update_cfs_load() ...
2011-01-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds8-25/+80
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (146 commits) tools, perf: Documentation for the power events API perf: Add calls to suspend trace point perf script: Make some lists static perf script: Use the default lost event handler perf session: Warn about errors when processing pipe events too perf tools: Fix perf_event.h header usage perf test: Clarify some error reports in the open syscall test x86, NMI: Add touch_nmi_watchdog to io_check_error delay x86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time x86: Only call smp_processor_id in non-preempt cases perf timechart: Adjust perf timechart to the new power events perf: Clean up power events by introducing new, more generic ones perf: Do not export power_frequency, but power_start event perf test: Add test for counting open syscalls perf evsel: Auto allocate resources needed for some methods perf evsel: Use {cpu,thread}_map to shorten list of parameters perf tools: Refactor all_tids to hold nr and the map perf tools: Refactor cpumap to hold nr and the map perf evsel: Introduce per cpu and per thread open helpers perf evsel: Steal the counter reading routines from stat ...
2011-01-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds6-15/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: remove unused __list_for_each_rcu() macro rculist: fix borked __list_for_each_rcu() macro rcu: reduce __call_rcu()-induced contention on rcu_node structures rcu: limit rcu_node leaf-level fanout rcu: fine-tune grace-period begin/end checks rcu: Keep gpnum and completed fields synchronized rcu: Stop chasing QS if another CPU did it for us rcu: increase synchronize_sched_expedited() batching rcu: Make synchronize_srcu_expedited() fast if running readers rcu: fix race condition in synchronize_sched_expedited() rcu: update documentation/comments for Lai's adoption patch rcu,cleanup: simplify the code when cpu is dying rcu,cleanup: move synchronize_sched_expedited() out of sched.c rcu: get rid of obsolete "classic" names in TREE_RCU tracing rcu: Distinguish between boosting and boosted rcu: document TINY_RCU and TINY_PREEMPT_RCU tracing. rcu: add tracing for TINY_RCU and TINY_PREEMPT_RCU rcu: priority boosting for TINY_PREEMPT_RCU rcu: move TINY_RCU from softirq to kthread rcu: add priority-inversion testing to rcutorture
2011-01-06mtd: add writebufsize field to mtd_info structAnatolij Gustschin1-0/+11
This field will be used to indicate the write buffer size of the MTD device. UBI will set it's minimal I/O unit size (min_io_size) to the indicated write buffer size. By this change we intend to fix failed recovery of UBIFS partitions we currently observe on NOR flash when mounting the partition after unclean unmount. Currently the min_io_size is set to mtd->writesize (which is 1 byte for NOR flash). But flash programming is often done from prepared write buffer containing multiple bytes and is performed in one programming operation which could be interrupted by a power cut or a system reset causing corrupted (partially written) areas in a flash sector. Knowing the size of potentially corrupted areas UBIFS scanning and recovery algorithms are able to perform successful recovery. In case of NOR flash minimal I/O size must be equal to the maximal size of the write buffer used by embedded flash programming algorithm. In case of NAND flash mtd->writebufsize should be equivalent to mtd->writesize. The subsequent patches will add mtd->writebufsize initialization where needed. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: OneNAND: add enable / disable methods to onenand_chipAdrian Hunter1-0/+2
Add enable / disable methods called from get_device() / release_device(). These can be used, for example, to allow the driver to prevent the voltage regulator from being put to sleep while OneNAND is in use. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06Merge branch 'master' of ↵Paul Mundt5-18/+51
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/video/sh_mobile_lcdcfb.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06vga_switcheroo: fix build with non switcheroo enabled path.Dave Airlie1-0/+1
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06[libata] avoid needlessly passing around ptr to SCSI completion funcJeff Garzik1-4/+2
It's stored in struct scsi_cmnd->scsi_done, making several 'done' parameters to functions redundant. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-06af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.David S. Miller1-8/+7
unix_release() can asynchornously set socket->sk to NULL, and it does so without holding the unix_state_lock() on "other" during stream connects. However, the reverse mapping, sk->sk_socket, is only transitioned to NULL under the unix_state_lock(). Therefore make the security hooks follow the reverse mapping instead of the forward mapping. Reported-by: Jeremy Fitzhardinge <jeremy@goop.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-05Merge branches 'mmci' and 'pl011-dma' into develRussell King1-0/+22
2011-01-05Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and ↵Russell King1-1/+8
'versatile' into devel
2011-01-05ARM: PL011: add DMA burst threshold support for ST variantsRussell King1-0/+15
ST Micro variants has some specific dma burst threshold compensation, which allows them to make better use of a DMA controller. Add support to set this up. Based on a patch from Linus Walleij. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: Add support for transmit DMARussell King1-0/+7
Add DMA engine support for transmit to the PL011 driver. Based on a patch from Linus Walliej, with the following changes: - remove RX DMA support. As PL011 doesn't give us receive timeout interrupts, we only get notified of received data when the RX DMA has completed. This rather sucks for interactive use of the TTY. - remove abuse of completions. Completions are supposed to be for events, not to tell what condition buffers are in. Replace it with a simple 'queued' bool. - fix locking - it is only safe to access the circular buffer with the port lock held. - only map the DMA buffer when required - if we're ever behind an IOMMU this helps keep IOMMU usage down, and also ensures that we're legal when we change the scatterlist entry length. - fix XON/XOFF sending - we must send XON/XOFF characters out as soon as possible - waiting for up to 4095 characters in the DMA buffer to be sent first is not acceptable. - fix XON/XOFF receive handling - we need to stop DMA when instructed to by the TTY layer, and restart it again when instructed to. There is a subtle problem here: we must not completely empty the circular buffer with DMA, otherwise we will not be notified of XON. - change the 'enable_dma' flag into a 'using DMA' flag, and track whether we can use TX DMA by whether the channel pointer is non-NULL. This gives us more control over whether we use DMA in the driver. - we don't need to have the TX DMA buffer continually allocated for each port - instead, allocate it when the port starts up, and free it when it's shut down. Update the 'using DMA' flag if we get the buffer, and adjust the TTY FIFO size appropriately. - if we're going to use PIO to send characters, use the existing IRQ based functionality rather than reimplementing it. This also ensures we call uart_write_wakeup() at the appropriate time, otherwise we'll stall. - use DMA engine helper functions for type safety. - fix init when built as a module - we can't have to initcall functions, so we must settle on one. This means we can eliminate the deferred DMA initialization. - there is no need to terminate transfers on a failed prep_slave_sg() call - nothing has been setup, so nothing needs to be terminated. This avoids a potential deadlock in the DMA engine code (tasklet->callback->failed prepare->terminate->tasklet_disable which then ends up waiting for the tasklet to finish running.) - Dan says that the submission callback should not return an error: | dma_submit_error() is something I should have removed after commit | a0587bcf "ioat1: move descriptor allocation from submit to prep" all | errors should be notified by prep failing to return a descriptor | handle. Negative dma_cookie_t values are only returned by the | dma_async_memcpy* calls which translate a prep failure into -ENOMEM. So remove the error handling at that point. This also solves the potential deadlock mentioned in the previous comment. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05block: fix accounting bug on cross partition mergesJerome Marchand2-0/+3
/proc/diskstats would display a strange output as follows. $ cat /proc/diskstats |grep sda 8 0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089 8 1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691 ~~~~~~~~~~ 8 2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390 8 3 sda3 54 487 2188 92 0 0 0 0 0 88 92 8 4 sda4 4 0 8 0 0 0 0 0 0 0 0 8 5 sda5 81 2027 2130 138 0 0 0 0 0 87 137 Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE. The detailed root cause is as follows. Assuming that there are two partition, sda1 and sda2. 1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight is 0 and sda2's one is 1. | hd_struct->in_flight --------------------------- sda1 | 0 sda2 | 1 --------------------------- 2. A bio belongs to sda1 is issued and is merged into the request mentioned on step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed from sda2 region to sda1 region. However the two partition's hd_struct->in_flight are not changed. | hd_struct->in_flight --------------------------- sda1 | 0 sda2 | 1 --------------------------- 3. The request is finished and blk_account_io_done() is called. In this case, sda2's hd_struct->in_flight, not a sda1's one, is decremented. | hd_struct->in_flight --------------------------- sda1 | -1 sda2 | 1 --------------------------- The patch fixes the problem by caching the partition lookup inside the request structure, hence making sure that the increment and decrement will always happen on the same partition struct. This also speeds up IO with accounting enabled, since it cuts down on the number of lookups we have to do. Also add a refcount to struct hd_struct to keep the partition in memory as long as users exist. We use kref_test_and_get() to ensure we don't add a reference to a partition which is going away. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-05kref: add kref_test_and_getJerome Marchand1-0/+1
Add kref_test_and_get() function, which atomically add a reference only if refcount is not zero. This prevent to add a reference to an object that is already being removed. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-05Merge commit 'v2.6.37' into perf/coreIngo Molnar1-3/+10
Merge reason: Add the final .37 tree. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05sched: Change wait_for_completion_*_timeout() to return a signed longNeilBrown1-4/+4
wait_for_completion_*_timeout() can return: 0: if the wait timed out -ve: if the wait was interrupted +ve: if the completion was completed. As they currently return an 'unsigned long', the last two cases are not easily distinguished which can easily result in buggy code, as is the case for the recently added wait_for_completion_interruptible_timeout() call in net/sunrpc/cache.c So change them both to return 'long'. As MAX_SCHEDULE_TIMEOUT is LONG_MAX, a large +ve return value should never overflow. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110105125016.64ccab0e@notabene.brown> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05Merge commit 'v2.6.37' into sched/coreIngo Molnar18-42/+111
Merge reason: Merge the final .37 tree. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05vga_switcheroo: add reprobe hook for fbcon to recheck connected outputs.Dave Airlie1-0/+1
This adds a hook after the mux is switched for the driver to reprobe the connected outputs. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05ARM: PL08x: fix locking between prepare function and submit functionRussell King - ARM Linux1-4/+0
The PL08x driver holds on to the channel lock with interrupts disabled between the prepare and the subsequent submit API functions. This means that the locking state when the prepare function returns is dependent on whether it suceeeds or not. It did this to ensure that the physical channel wasn't released, and as it used to add the descriptor onto the pending list at prepare time rather than submit time. Now that we have reorganized the code to remove those reasons, we can now safely release the spinlock at the end of preparation and reacquire it in our submit function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: introduce 'phychan_hold' to hold on to physical channelsRussell King - ARM Linux1-0/+3
Introduce 'phychan_hold' to hold on to physical DMA channels while we're preparing a new descriptor for it. This will be incremented when we allocate a physical channel and set the MUX registers during the preparation of the TXD, and will only be decremented when the TXD is submitted. This prevents the physical channel being given up before the new TXD is placed on the queue. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: rename 'desc_list' as 'pend_list'Russell King - ARM Linux1-2/+2
This 'desc_list' is actually a list of pending descriptors, so name it after its function (pending list) rather than what it contains (descriptors). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: shrink srcbus/dstbus in txd structureRussell King - ARM Linux1-2/+2
We only need to store the dma address. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: allow AHB master port selection to be configuredRussell King - ARM Linux1-2/+13
Platforms need to be able to control which AHB master interface is used, as each AHB master interface may be asymetric. Allow the interfaces used for fetching LLIs, memory, and each peripheral to be configured individually. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: move default cctl into txd structureRussell King - ARM Linux1-1/+2
Rather than modifying platform data while preparing a transfer, copy the cctl value into the txd structure and modify the value there. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: move ccfg into txd structureRussell King - ARM Linux1-1/+5
The ccfg register is used to configure the channel parameters - the type and direction of transfer, the flow control signal and IRQ mask enables. The type and direction of transfer is known in the relevent prep_* function where a txd is created. The IRQ mask enables are always set, and the flow control signals are always set when we start processing a txd according to phychan->signal. If we store the ccfg value in the txd structure, we can avoid modifying platform data - and even having it in platform data at all. So, remove it from platform data too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: avoid duplicating registers in txd and phychan structuresRussell King - ARM Linux1-13/+0
As we now have all the code accessing the phychan {csrc,cdst,clli,cctl, ccfg} members in one function, there's no point storing the data into the struct. Get rid of the struct members. Re-order the register dump in the dev_dbg() to reflect the order we write the registers to the DMA device. The txd {csrc,cdst,clli,cctl} values are duplicates of the lli[0] values, so there's no point duplicating these either. Program the DMAC registers directly from the lli[0] values. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: use 'size_t' for lengthsRussell King - ARM Linux1-2/+2
Use size_t for variables denoting lengths throughout, and use the 'z' qualifier for printing the value. For safety, add a BUG_ON() in pl08x_fill_lli_for_desc() to catch the remainder potentially becoming negative. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: avoid 'void *' struct fields when we can type them properlyRussell King - ARM Linux1-1/+4
Avoid using 'void *' struct fields when the structs are not defined in linux/amba/pl08x.h - instead, forward declare the struct names, and use these instead. This ensures we have proper typechecking. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05ARM: PL08x: fix atomic_t usage and tx_submit() return value rangeRussell King - ARM Linux1-1/+0
The last_issued variable uses an atomic type, which is only incremented inside a protected region, and then read. Everywhere else only reads the value, so it isn't using atomic_t correctly, and it doesn't even need to. Moreover, the DMA engine code provides us with a variable for this already - chan.cookie. Use chan.cookie instead. Also, avoid negative dma_cookie_t values - negative returns from tx_submit() mean failure, yet in reality we always succeed. Restart from cookie 1, just like other DMA engine drivers do. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05nfsd4: move idmap and acl header files into fs/nfsdJ. Bruce Fields2-125/+0
These are internal nfsd interfaces. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-05Merge branch 'master' of /home/airlied/kernel/linux-2.6 into drm-core-nextDave Airlie26-46/+136
2011-01-05locks: eliminate fl_mylease callbackJ. Bruce Fields1-1/+0
The nfs server only supports read delegations for now, so we don't care how conflicts are determined. All we care is that unlocks are recognized as matching the leases they are meant to remove. After the last patch, a comparison of struct files will work for that purpose. So we no longer need this callback. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-05svcrpc: simpler request droppingJ. Bruce Fields1-0/+1
Currently we use -EAGAIN returns to determine when to drop a deferred request. On its own, that is error-prone, as it makes us treat -EAGAIN returns from other functions specially to prevent inadvertent dropping. So, use a flag on the request instead. Returning an error on request deferral is still required, to prevent further processing, but we no longer need worry that an error return on its own could result in a drop. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-05SUNRPC: Remove more code when NFSD_DEPRECATED is not configuredJ. Bruce Fields1-0/+3
Signed-off-by: NeilBrown <neilb@suse.de> [bfields@redhat.com: moved svcauth_unix_purge outside ifdef's.] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-01-04net: typos in comments in include/linux/igmp.hFrancois-Xavier Le Bail1-2/+2
There are typos in comments in include/linux/igmp.h: 83 #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ 84 #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ [snip] 88 #define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x11 */ 89 #define IGMP_HOST_LEAVE_MESSAGE 0x17 90 #define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x11 */ The line 88 and 90 are about REPORT messages. The IGMP_HOST_MEMBERSHIP_REPORT (IGMP V1) value is 0x12. So the comment on line 88 must be /* V2 version of 0x12 */, and the comment on line 90 must be /* V3 version of 0x12 */. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@orange.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04firewire: use split transaction timeout only for split transactionsClemens Ladisch1-1/+1
Instead of starting the split transaction timeout timer when any request is submitted, start it only when the destination's ACK_PENDING has been received. This prevents us from using a timeout that is too short, and, if the controller's AT queue is emptying very slowly, from cancelling a packet that has not yet been sent. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>