summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2011-01-13leds-lp5521: modify the way of setting led device nameArun Murthy1-0/+1
Currently the led device name is fetched from the device_type in I2C_BOARD_INFO which comes from the platform data. This name is in turn used to create an entry in sysfs. If there exists two or more lp5521 on a particular platform, the device_type in I2C_BOARD_INFO has to be the same, else lp5521 driver probe wont be called and if used so, results in run time warning "cannot create sysfs with same name" and hence a failure. The name that is used to create sysfs entry is to be passed by the struct led_platform_data. Hence adding an element of type const char * and change in lp5521 driver to use this name in creating the led device if present else use the name obtained by I2C_BOARD_INFO. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: leds-lp5523: modify the way of setting led device nameSamu Onkalo1-0/+1
Currently all leds channels begins with string lp5523. Patch adds a possibility to provide name via platform data. This makes it possible to have several chips without overlapping sysfs names. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'for-2.6.38/event-handling' into for-2.6.38/coreJens Axboe4-4/+27
2011-01-13netfilter: ebt_ip6: allow matching on ipv6-icmp types/codesFlorian Westphal1-3/+12
To avoid adding a new match revision icmp type/code are stored in the sport/dport area. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Holger Eitzenberger <holger@eitzenberger.org> Reviewed-by: Bart De Schuymer<bdschuym@pandora.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-13netfilter: x_table: speedup compat operationsEric Dumazet1-1/+2
One iptables invocation with 135000 rules takes 35 seconds of cpu time on a recent server, using a 32bit distro and a 64bit kernel. We eventually trigger NMI/RCU watchdog. INFO: rcu_sched_state detected stall on CPU 3 (t=6000 jiffies) COMPAT mode has quadratic behavior and consume 16 bytes of memory per rule. Switch the xt_compat algos to use an array instead of list, and use a binary search to locate an offset in the sorted array. This halves memory need (8 bytes per rule), and removes quadratic behavior [ O(N*N) -> O(N*log2(N)) ] Time of iptables goes from 35 s to 150 ms. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-13netfilter: xt_conntrack: support matching on port rangesPatrick McHardy1-0/+15
Add a new revision 3 that contains port ranges for all of origsrc, origdst, replsrc and repldst. The high ports are appended to the original v2 data structure to allow sharing most of the code with v1 and v2. Use of the revision specific port matching function is made dependant on par->match->revision. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-13netfilter: xt_comment: drop unneeded unsigned qualifierJan Engelhardt1-1/+1
Since a string is stored, and not something like a MAC address that would rely on (un)signedness, drop the qualifier. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai3-0/+327
2011-01-13Merge branch 'common/serial-rework' into sh-latestPaul Mundt1-0/+22
2011-01-13Merge branch 'master' of ↵Paul Mundt1081-20927/+63990
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework Conflicts: arch/sh/kernel/cpu/sh2/setup-sh7619.c arch/sh/kernel/cpu/sh2a/setup-mxg.c arch/sh/kernel/cpu/sh2a/setup-sh7201.c arch/sh/kernel/cpu/sh2a/setup-sh7203.c arch/sh/kernel/cpu/sh2a/setup-sh7206.c arch/sh/kernel/cpu/sh3/setup-sh7705.c arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh4-202.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4/setup-sh7760.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7780.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c arch/sh/kernel/cpu/sh4a/setup-shx3.c arch/sh/kernel/cpu/sh5/setup-sh5.c drivers/serial/sh-sci.c drivers/serial/sh-sci.h include/linux/serial_sci.h
2011-01-13Merge branch 'master' of git://1984.lsi.us.es/net-2.6David S. Miller1-0/+15
2011-01-13Merge branch 'master' of ↵David S. Miller1-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-01-13Merge branch 'master' of ↵Simon Horman177-1575/+4148
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 into HEAD
2011-01-13fs: add hole punching to fallocateJosef Bacik1-0/+1
Hole punching has already been implemented by XFS and OCFS2, and has the potential to be implemented on both BTRFS and EXT4 so we need a generic way to get to this feature. The simplest way in my mind is to add FALLOC_FL_PUNCH_HOLE to fallocate() since it already looks like the normal fallocate() operation. I've tested this patch with XFS and BTRFS to make sure XFS did what it's supposed to do and that BTRFS failed like it was supposed to. Thank you, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13move internal-only parts of ncpfs headers to fs/ncpfsAl Viro4-315/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13switch ncpfsAl Viro1-1/+1
merge dentry_operations for root and non-root Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13pass default dentry_operations to mount_pseudo()Al Viro1-1/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13take coda-private headers out of include/linuxAl Viro3-181/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13switch codaAl Viro1-0/+2
Coda ->d_revalidate() actually checks for root, ->d_delete() is irrelevant. So we can use the same d_op for all coda dentries Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13per-superblock default ->d_opAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13net/ceph: make ceph_msgr_wq non-reentrantTejun Heo1-5/+0
ceph messenger code does a rather complex dancing around multithread workqueue to make sure the same work item isn't executed concurrently on different CPUs. This restriction can be provided by workqueue with WQ_NON_REENTRANT. Make ceph_msgr_wq non-reentrant workqueue with the default concurrency level and remove the QUEUED/BUSY logic. * This removes backoff handling in con_work() but it couldn't reliably block execution of con_work() to begin with - queue_con() can be called after the work started but before BUSY is set. It seems that it was an optimization for a rather cold path and can be safely removed. * The number of concurrent work items is bound by the number of connections and connetions are independent from each other. With the default concurrency level, different connections will be executed independently. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sage Weil <sage@newdream.net> Cc: ceph-devel@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-13ceph: add dir_layout to inodeSage Weil1-3/+13
Add a ceph_dir_layout to the inode, and calculate dentry hash values based on the parent directory's specified dir_hash function. This is needed because the old default Linux dcache hash function is extremely week and leads to a poor distribution of files among dir fragments. Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-13Merge branch 'linus' into idle-testLen Brown172-1367/+4148
2011-01-13IB/mlx4: Handle protocol field in multicast tableAleksey Senin2-7/+9
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-13Merge branch 'suspend-ioremap-cache' into releaseLen Brown1-9/+10
2011-01-13ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS reworkRafael J. Wysocki1-9/+10
The recent rework of the NVS saving/restoring code introduced two build issues for !CONFIG_ACPI, a warning in drivers/acpi/internal.h and an error in arch/x86/kernel/e820.c. Fix them by providing suitable static inline definitions of the relevant functions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12netfilter: fix compilation when conntrack is disabled but tproxy is enabledKOVACS Krisztian1-0/+15
The IPv6 tproxy patches split IPv6 defragmentation off of conntrack, but failed to update the #ifdef stanzas guarding the defragmentation related fields and code in skbuff and conntrack related code in nf_defrag_ipv6.c. This patch adds the required #ifdefs so that IPv6 tproxy can truly be used without connection tracking. Original report: http://marc.info/?l=linux-netdev&m=129010118516341&w=2 Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-12quota: Fix deadlock during path resolutionJan Kara2-4/+5
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl is prone to deadlocks. We hold s_umount semaphore for reading during the path resolution and resolution itself may need to acquire the semaphore for writing when e. g. autofs mountpoint is passed. Solve the problem by performing the resolution before we get hold of the superblock (and thus s_umount semaphore). The whole thing is complicated by the fact that some filesystems (OCFS2) ignore the path argument. So to distinguish between filesystem which want the path and which do not we introduce new .quota_on_meta callback which does not get the path. OCFS2 then uses this callback instead of old .quota_on. CC: Al Viro <viro@ZenIV.linux.org.uk> CC: Christoph Hellwig <hch@lst.de> CC: Ted Ts'o <tytso@mit.edu> CC: Joel Becker <joel.becker@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-12cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specificLen Brown1-1/+0
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idleLen Brown1-1/+0
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12cpuidle: delete unused CPUIDLE_FLAG_SHALLOW, BALANCED, DEEP definitionsLen Brown1-3/+0
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12cpuidle: delete NOP CPUIDLE_FLAG_POLLLen Brown1-1/+0
it serves no purpose Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12regulator: Add initial per-regulator debugfs supportMark Brown1-2/+6
We only expose the use and open counts to userspace, providing a tiny bit of insight into what the API is up to. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Add API to re-apply voltage to hardwareMark Brown1-0/+1
When cooperating with an external control source the regulator setup may be changed underneath the API. Currently consumers can just redo the regulator_set_voltage() to restore a previously set configuration but provide an explicit API for doing this as optimsations in the regulator_set_voltage() implementation will shortly prevent that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Provide a selector based set_voltage_sel() operationMark Brown1-0/+3
Many regulator drivers implement voltage setting by looping through a table of possible values, normally because the set of available voltages can't be mapped onto selectors with simple calcuation. Factor out these loops by providing a variant of set_voltage() which takes a selector rather than a voltage range as an argument and implementing a loop through the available selectors in the core. This is not going to be suitable for use with all devices as when the regulator voltage can be mapped onto selector values with a simple calculation the linear scan through the available values will be more expensive than just doing the calculation, especially for regulators that provide fine grained voltage control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: support PMIC mc13892Yong Shen1-0/+39
add support for mc13892, tested on mx51 babbage board Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12Change the register name definitions for mc13783Yong Shen1-33/+34
To make mc13783 and mc13892 share code, the register names should be changed to fit the new macro definitions in the comming patch. Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Moved define for number of regulators in ab8500Bengt Jonsson2-14/+15
The define for number of regulators is moved from ab8500-core to ab8500-regulator so that the regulator driver can be updated independently of ab8500-core. This also changes the platform configuration structure of ab8500-core so that it contains a pointer to the regulator_init_data array plus number of regulators instead of an fixed size array of pointers to regulator_init_data. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Allow drivers to report voltages as selectorsMark Brown1-0/+3
Since drivers already have to provide an API for translating selectors into voltages they may as well just report the selector values directly to the core API rather than implement the lookup themselves. The old interface is left in place for now, but may be removed in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Copy constraints from regulators when initialising themMark Brown1-1/+1
Currently the regulator API uses the constraints structure passed in to the core throughout the lifetime of the object. This means that it is not possible to mark the constraints as __initdata so if the kernel supports many boards the constraints for all of them are kept around throughout the lifetime of the system, consuming memory needlessly. By copying constraints that are actually used we allow the use of __initdata, saving memory when multiple boards are supported. This also means the constraints can be const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Report actual configured voltage to set_voltage()Mark Brown1-1/+2
Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12Merge branch 'misc' into releaseLen Brown1-10/+5
2011-01-12Merge branch 'ipmi' into releaseLen Brown2-0/+46
2011-01-12Merge branch 'apei' into releaseLen Brown1-4/+82
2011-01-12Merge branch 'thermal' into releaseLen Brown1-0/+32
2011-01-12KVM: Fix build error on s390 due to missing tlbs_dirtyAvi Kivity1-1/+1
Make it available for all archs. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: Make the way of accessing lpage_info more genericTakuya Yoshikawa1-4/+6
Large page information has two elements but one of them, write_count, alone is accessed by a helper function. This patch replaces this helper function with more generic one which returns newly named kvm_lpage_info structure and use it to access the other element rmap_pde. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: delay flush all tlbs on sync_page pathXiao Guangrong1-0/+2
Quote from Avi: | I don't think we need to flush immediately; set a "tlb dirty" bit somewhere | that is cleareded when we flush the tlb. kvm_mmu_notifier_invalidate_page() | can consult the bit and force a flush if set. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: PPC: Fix compile warningAlexander Graf1-0/+2
KVM compilation fails with the following warning: include/linux/kvm_host.h: In function 'kvm_irq_routing_update': include/linux/kvm_host.h:679:2: error: 'struct kvm' has no member named 'irq_routing' That function is only used and reasonable to have on systems that implement an in-kernel interrupt chip. PPC doesn't. Fix by #ifdef'ing it out when no irqchip is available. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: fast-path msi injection with irqfdMichael S. Tsirkin1-0/+16
Store irq routing table pointer in the irqfd object, and use that to inject MSI directly without bouncing out to a kernel thread. While we touch this structure, rearrange irqfd fields to make fastpath better packed for better cache utilization. This also adds some comments about locking rules and rcu usage in code. Some notes on the design: - Use pointer into the rt instead of copying an entry, to make it possible to use rcu, thus side-stepping locking complexities. We also save some memory this way. - Old workqueue code is still used for level irqs. I don't think we DTRT with level anyway, however, it seems easier to keep the code around as it has been thought through and debugged, and fix level later than rip out and re-instate it later. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>