summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2011-02-19genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner1-1/+25
That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AFFINITY_SET to coreThomas Gleixner1-1/+8
Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner1-1/+15
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Make CHECK_IRQ_PER_CPU an inline and deprecate itThomas Gleixner1-2/+6
Its' too ugly and needs to go. The only users are core code and parisc. Core code does not need it and parisc gets a new check once IRQ_PER_CPU is reflected in irq_data.state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CONFIG_IRQ_PER_CPUThomas Gleixner1-5/+0
The saving of this switch is minimal versus the ifdef mess it creates. Simple enable PER_CPU unconditionally and remove the config switch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner1-2/+18
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add state field to irq_dataThomas Gleixner2-0/+4
Some chip implementations need to access certain status flags. With sparse irqs that requires a lookup of the irq descriptor. Add a state field which contains such flags. Name it in a way which will make coders happy to access it with the proper accessor functions. And it's easy to grep for. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SUSPENDED to coreThomas Gleixner1-2/+0
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner1-1/+1
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_PENDING flag to coreThomas Gleixner1-1/+1
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_DISABLED to coreThomas Gleixner1-2/+2
Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner1-4/+5
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_ONESHOT to coreThomas Gleixner1-1/+0
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_INPROGRESS to coreThomas Gleixner1-1/+5
We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_POLL_INPROGRESS to coreThomas Gleixner1-1/+0
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use modify_status for set_irq_nested_threadThomas Gleixner1-3/+13
No need for a separate function in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SPURIOUS_DISABLED to core stateThomas Gleixner1-1/+0
No users outside. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AUTODETECT to internal stateThomas Gleixner1-1/+0
No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add internal state field to irq_descThomas Gleixner1-1/+2
That field will contain internal state information which is not going to be exposed to anything outside the core code - except via accessor functions. I'm tired of everyone fiddling in irq_desc.status. core_internal_state__do_not_mess_with_it is clear enough, annoying to type and easy to grep for. Offenders will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Implement generic irq_show_interrupts()Thomas Gleixner1-0/+1
All archs implement show_interrupts() in more or less the same way. That's tons of duplicated code with different bugs with no value. Implement a generic version and deprecate show_interrupts() Unfortunately we need some ifdeffery for !GENERIC_HARDIRQ archs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move irq thread flags to coreThomas Gleixner1-14/+0
Soleley used in core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mark polled irqs and defer the real handlerThomas Gleixner1-0/+1
With the chip.end() function gone we might run into a situation where a poll call runs and the real interrupt comes in, sees IRQ_INPROGRESS and disables the line. That might be a perfect working one, which will then be masked forever. So mark them polled while the poll runs. When the real handler sees IRQ_INPROGRESS it checks the poll flag and waits for the polling to complete. Add the necessary amount of sanity checks to it to avoid deadlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not copy affinity before setThomas Gleixner1-0/+11
While rumaging through arch code I found that there are a few workarounds which deal with the fact that the initial affinity setting from request_irq() copies the mask into irq_data->affinity before the chip code is called. In the normal path we unconditionally copy the mask when the chip code returns 0. Copy after the code is called and add a return code IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the copy. That way we see the real mask when the chip function decided to truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is the current behaviour. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Namespace cleanupThomas Gleixner3-21/+116
The irq namespace has become quite convoluted. My bad. Clean it up and deprecate the old functions. All new functions follow the scheme: irq number based: irq_set/get/xxx/_xxx(unsigned int irq, ...) irq_data based: irq_data_set/get/xxx/_xxx(struct irq_data *d, ....) irq_desc based: irq_desc_get_xxx(struct irq_desc *desc) Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19Merge branch 'irq/urgent' into irq/coreThomas Gleixner13-28/+69
Reason: Further patches are conflicting with mainline fixes Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19ARM: clcd: add method for describing display capabilitiesRussell King1-17/+65
The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: clcd: use amba_part() to determine if we have a PL110 primecellRussell King1-5/+5
Instead of matching the entire peripheral ID, match against just the part number using the amba_xxx() macros. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19Merge branch 'rtc-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Re-enable UIE timer/polling emulation RTC: Revert UIE emulation removal RTC: Release mutex in error path of rtc_alarm_irq_enable
2011-02-19ssb: when needed, reject IM input while disabling deviceRafał Miłecki1-0/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-19ssb: remove invalid define SSB_TMSLOW_PHYCLKRafał Miłecki1-1/+0
It was incorrectly introduced in d2730b2a6a019d14455556019d744ab051e6554b. We have already fixed function to use correct define, but forgot remove old one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-19staging: iio: ak8975: add platform data.Tony SIM1-0/+20
As some of the platform not support irq_to_gpio, we pass gpio port by platform data. Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-18ipv4: Add hash table of interface addresses.David S. Miller1-0/+1
This will be used to optimize __ip_dev_find() and friends. With help from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18Merge branch 'fixes-2.6.38' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' workqueue: wake up a worker when a rescuer is leaving a gcwq
2011-02-18Merge 2.6.38-rc5 into staging-nextGreg Kroah-Hartman18-51/+107
This is to resolve a merge conflict with: drivers/staging/zram/zram_drv.c as pointed out by Stephen Rothwell Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-18Expand CONFIG_DEBUG_LIST to several other list operationsLinus Torvalds1-3/+9
When list debugging is enabled, we aim to readably show list corruption errors, and the basic list_add/list_del operations end up having extra debugging code in them to do some basic validation of the list entries. However, "list_del_init()" and "list_move[_tail]()" ended up avoiding the debug code due to how they were written. This fixes that. So the _next_ time we have list_move() problems with stale list entries, we'll hopefully have an easier time finding them.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-18Driver core: convert platform_{get,set}_drvdata to static inline functionsMarc Kleine-Budde1-2/+9
This patch converts the macros for platform_{get,set}_drvdata to static inline functions to add typechecking. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-18kobject.h: fix build when CONFIG_HOTPLUG is disabledRandy Dunlap1-3/+2
When CONFIG_HOTPLUG is not enabled, the inline function add_uevent_var() needs to have its __attribute__ before the function name/parameters, otherwise there are syntax errors. linux-next-20110207/include/linux/kobject.h:232: error: expected ',' or ';' before '{' token Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-18usb: otg: notifier: switch to atomic notifierFelipe Balbi1-3/+3
most of our notifications, will be called from IRQ context, so an atomic notifier suits the job better. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18usb: otg: TWL6030 Save the last event in otg_transceiverHema HK1-0/+1
Save the last event in the otg_transceiver so that it can used in the musb driver and gadget driver to configure the musb and enable the vbus for host mode and OTG mode, if the device is connected during boot. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18OMAP: OneNAND: fix 104MHz supportAdrian Hunter1-0/+1
104MHz needs a latency of 8 clock cycles and the VHF flag must be set. Also t_rdyo is specified as "not applicable" so pick a lower value, and force at least 1 clk between AVD High to OE Low. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-18RTC: Re-enable UIE timer/polling emulationJohn Stultz1-0/+1
This patch re-enables UIE timer/polling emulation for rtc devices that do not support alarm irqs. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-18RTC: Revert UIE emulation removalJohn Stultz1-0/+14
Uwe pointed out that my alarm based UIE emulation is not sufficient to replace the older timer/polling based UIE emulation on devices where there is no alarm irq. This causes rtc devices without alarms to return -EINVAL to UIE ioctls. The fix is to re-instate the old timer/polling method for devices without alarm irqs. This patch reverts the following commits: 042620a018afcfba1d678062b62e46 - Remove UIE emulation 1daeddd5962acad1bea55e524fc0fa - Cleanup removed UIE emulation declaration b5cc8ca1c9c3a37eaddf709b2fd3e1 - Remove Kconfig symbol for UIE emulation The emulation mode will still need to be wired-in with a following patch before it will work. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-18net: introduce NETIF_F_RXCSUMMichał Mirosław2-2/+4
Introduce NETIF_F_RXCSUM to replace device-private flags for RX checksum offload. Integrate it with ndo_fix_features. ethtool_op_get_rx_csum() is removed altogether as nothing in-tree uses it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18net: Introduce new feature setting opsMichał Mirosław2-2/+120
This introduces a new framework to handle device features setting. It consists of: - new fields in struct net_device: + hw_features - features that hw/driver supports toggling + wanted_features - features that user wants enabled, when possible - new netdev_ops: + feat = ndo_fix_features(dev, feat) - API checking constraints for enabling features or their combinations + ndo_set_features(dev) - API updating hardware state to match changed dev->features - new ethtool commands: + ETHTOOL_GFEATURES/ETHTOOL_SFEATURES: get/set dev->wanted_features and trigger device reconfiguration if resulting dev->features changed + ETHTOOL_GSTRINGS(ETH_SS_FEATURES): get feature bits names (meaning) Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18ethtool: factorize get/set_one_featureMichał Mirosław1-0/+6
This allows to enable GRO even if RX csum is disabled. GRO will not be used for packets without hardware checksum anyway. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18ethtool: enable GSO and GRO by defaultMichał Mirosław1-0/+3
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17tty: add a helper for setting termios data from kernel sideAlan Cox1-0/+1
This basically encapsulates the small bit of locking knowledge needed. While we are at it make sure we blow up on any more abusers and unsafe misuses of ioctl for this kind of stuff. We change the function to return an argument as at some point it needs to honour the POSIX 'I asked for changes but got none of them' error reporting corner case. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: fix build error in vt_ioctl.c if CONFIG_COMPAT is enabledGreg Kroah-Hartman1-1/+1
This was caused by the previous patch to remove the file pointer from the tty ioctl handler. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: now phase out the ioctl file pointer for goodAlan Cox2-6/+5
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: remove filp from the USB tty ioctlsAlan Cox1-1/+1
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2026-11-16 02:12:58 +0300