summaryrefslogtreecommitdiff
path: root/include/linux/pm_runtime.h
AgeCommit message (Collapse)AuthorFilesLines
2017-06-28PM / core: Drop run_wake flag from struct dev_pm_infoRafael J. Wysocki1-12/+0
The run_wake flag in struct dev_pm_info is used to indicate whether or not the device is capable of generating remote wakeup signals at run time (or in the system working state), but the distinction between runtime remote wakeup and system wakeup signaling has always been rather artificial. The only practical reason for it to exist at the core level was that ACPI and PCI treated those two cases differently, but that's not the case any more after recent changes. For this reason, get rid of the run_wake flag and, when applicable, use device_set_wakeup_capable() and device_can_wakeup() instead of device_set_run_wake() and device_run_wake(), respectively. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-13Merge tag 'driver-core-4.10-rc1' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...
2016-10-31PM / runtime: Optimize the use of device linksRafael J. Wysocki1-0/+4
If the device has no links to suppliers that should be used for runtime PM (links with DEVICE_LINK_PM_RUNTIME set), there is no reason to walk the list of suppliers for that device during runtime suspend and resume. Add a simple mechanism to detect that case and possibly avoid the extra unnecessary overhead. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31PM / runtime: Use device linksRafael J. Wysocki1-0/+6
Modify the runtime PM framework to use device links to ensure that supplier devices will not be suspended if any of their consumer devices are active. The idea is to reference count suppliers on the consumer's resume and drop references to them on its suspend. The information on whether or not the supplier has been reference counted by the consumer's (runtime) resume is stored in a new field (rpm_active) in the link object for each link. It may be necessary to clean up those references when the supplier is unbinding and that's why the links whose status is DEVICE_LINK_SUPPLIER_UNBIND are skipped by the runtime suspend and resume code. The above means that if the consumer device is probed in the runtime-active state, the supplier has to be resumed and reference counted by device_link_add() so the code works as expected on its (runtime) suspend. There is a new flag, DEVICE_LINK_RPM_ACTIVE, to tell device_link_add() about that (in which case the caller is responsible for making sure that the consumer really will be runtime-active when runtime PM is enabled for it). The other new link flag, DEVICE_LINK_PM_RUNTIME, tells the core whether or not the link should be used for runtime PM at all. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-21PM / Runtime: Convert pm_runtime_set_suspended() to return an intUlf Hansson1-2/+2
Because pm_runtime_set_suspended() invokes __pm_runtime_set_status(), which can fail, pm_runtime_set_suspended() can also fail. Instead of hiding a potential error, let's propagate it by converting pm_runtime_set_suspended() from a void to return an int. In this way users are able to check the error code and act accordingly. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Runtime: Remove the exported function pm_children_suspended()Ulf Hansson1-7/+0
The exported function pm_children_suspended() has only one caller, which is the runtime PM internal function, rpm_check_suspend_allowed(). Let's clean-up this code, by removing pm_children_suspended() altogether and instead do the one-liner check directly in rpm_check_suspend_allowed(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-22PM / Runtime: Move ignore_children flag under CONFIG_PMUlf Hansson1-0/+6
The ignore_children flag is used only when CONFIG_PM is set, so let's move it into that section within the struct dev_pm_info. Move also the corresponding pm_suspend_ignore_children() API out of device.h into pm_runtime.h, to be consistent with similar APIs. Unfortunate this causes the Toshiba PCI SD mmc host driver to fail to compile as it needs pm_runtime.h, so let's fix this here as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-21PM / runtime: Add new helper for conditional usage count incrementationRafael J. Wysocki1-0/+5
Introduce a new runtime PM function, pm_runtime_get_if_in_use(), that will increment the device's runtime PM usage counter and return 1 if its status is RPM_ACTIVE and its usage counter is greater than 0 at the same time (0 will be returned otherwise). This is useful for things that should only be done if the device is active (from the runtime PM perspective) and used by somebody (as indicated by the usage counter) already and they are not worth bothering otherwise. Requested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-22PM / sleep: Allow devices without runtime PM to do direct-completeAlan Stern1-6/+0
Don't unset the direct_complete flag on devices that have runtime PM disabled, if they are runtime suspended. This is needed because otherwise ancestor devices wouldn't be able to do direct_complete without adding runtime PM support to all its descendants. Also removes pm_runtime_suspended_if_enabled() because it's now unused. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-13Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds1-0/+6
Pull ARM updates from Russell King: "The major updates included in this update are: - Clang compatible stack pointer accesses by Behan Webster. - SA11x0 updates from Dmitry Eremin-Solenikov. - kgdb handling of breakpoints with read-only text/modules - Support for Privileged-no-execute feature on ARMv7 to prevent userspace code execution by the kernel. - AMBA primecell bus handling of irq-safe runtime PM - Unwinding support for memset/memzero/memmove/memcpy functions - VFP fixes for Krait CPUs and improvements in detecting the VFP architecture - A number of code cleanups (using pr_*, removing or reducing the severity of a couple of kernel messages, splitting ftrace asm code out to a separate file, etc.) - Add machine name to stack dump output" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits) ARM: 8247/2: pcmcia: sa1100: make use of device clock ARM: 8246/2: pcmcia: sa1111: provide device clock ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks ARM: 8244/1: fbdev: sa1100fb: make use of device clock ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device ARM: 8242/1: sa1100: add cpu clock ARM: 8221/1: PJ4: allow building in Thumb-2 mode ARM: 8234/1: sa1100: reorder IRQ handling code ARM: 8233/1: sa1100: switch to hwirq usage ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain ARM: 8231/1: sa1100: introduce irqdomains support ARM: 8230/1: sa1100: shift IRQs by one ARM: 8229/1: sa1100: replace irq numbers with names in irq driver ARM: 8228/1: sa1100: drop entry-macro.S ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER ARM: 8241/1: Update processor_modes for hyp and monitor mode ARM: 8240/1: MCPM: document mcpm_sync_init() ARM: 8239/1: Introduce {set,clear}_pte_bit ARM: 8238/1: mm: Refine set_memory_* functions ARM: 8237/1: fix flush_pfn_alias ...
2014-12-04PM: Drop CONFIG_PM_RUNTIME from the driver coreRafael J. Wysocki1-12/+9
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM or even may be dropped entirely in some cases. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PM core code. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-17ARM: 8199/1: PM / Runtime: Add getter for querying the IRQ safe option v12Krzysztof Kozlowski1-0/+6
Add a simple getter pm_runtime_is_irq_safe() for querying whether runtime PM IRQ safe was set or not. Various bus drivers implementing runtime PM may use choose to suspend differently based on IRQ safeness status of child driver (e.g. do not unprepare the clock if IRQ safe is not set). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-23PM: Create PM workqueue if runtime PM is not configured tooRafael J. Wysocki1-2/+9
The PM workqueue is going to be used by ACPI PM notify handlers regardless of whether or not runtime PM is configured, so move it out of #ifdef CONFIG_PM_RUNTIME. Do that in three places in the ACPI device PM code. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarilyRafael J. Wysocki1-0/+6
Currently, some subsystems (e.g. PCI and the ACPI PM domain) have to resume all runtime-suspended devices during system suspend, mostly because those devices may need to be reprogrammed due to different wakeup settings for system sleep and for runtime PM. For some devices, though, it's OK to remain in runtime suspend throughout a complete system suspend/resume cycle (if the device was in runtime suspend at the start of the cycle). We would like to do this whenever possible, to avoid the overhead of extra power-up and power-down events. However, problems may arise because the device's descendants may require it to be at full power at various points during the cycle. Therefore the most straightforward way to do this safely is if the device and all its descendants can remain runtime suspended until the complete stage of system resume. To this end, introduce a new device PM flag, power.direct_complete and modify the PM core to use that flag as follows. If the ->prepare() callback of a device returns a positive number, the PM core will regard that as an indication that it may leave the device runtime-suspended. It will then check if the system power transition in progress is a suspend (and not hibernation in particular) and if the device is, indeed, runtime-suspended. In that case, the PM core will set the device's power.direct_complete flag. Otherwise it will clear power.direct_complete for the device and it also will later clear it for the device's parent (if there's one). Next, the PM core will not invoke the ->suspend() ->suspend_late(), ->suspend_irq(), ->resume_irq(), ->resume_early(), or ->resume() callbacks for all devices having power.direct_complete set. It will invoke their ->complete() callbacks, however, and those callbacks are then responsible for resuming the devices as appropriate, if necessary. For example, in some cases they may need to queue up runtime resume requests for the devices using pm_request_resume(). Changelog partly based on an Alan Stern's description of the idea (http://marc.info/?l=linux-pm&m=139940466625569&w=2). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2014-03-02PM: Add pm_runtime_suspend|resume_force functionsUlf Hansson1-0/+4
This patch provides two new runtime PM helper functions which intend to be used from system suspend/resume callbacks, to make sure devices are put into low power state during system suspend and brought back to full power at system resume. The prerequisite is to have all levels of a device's runtime PM callbacks to be defined through the SET_PM_RUNTIME_PM_OPS macro, which means these are available for CONFIG_PM. By using the new runtime PM helper functions especially the two scenarios below will be addressed. 1) The PM core prevents .runtime_suspend callbacks from being invoked during system suspend. That means even for a runtime PM centric subsystem and driver, the device needs to be put into low power state from a system suspend callback. Otherwise it may very well be left in full power state (runtime resumed) while the system is suspended. By using the new helper functions, we make sure to walk the hierarchy of a device's power domain, subsystem and driver. 2) Subsystems and drivers need to cope with all the combinations of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. The two new helper functions smothly addresses this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PMUlf Hansson1-4/+8
The pm_generic_runtime_suspend|resume functions were implemented within CONFIG_PM_RUNTIME. As we also may use runtime PM callbacks during system suspend, to put devices into low power state, we need to move the implementation of pm_generic_runtime_suspend|resume to CONFIG_PM. This change gives a power domain provision to invoke a platform driver's runtime PM callback from a power domain's system PM callback. This were earlier prevented by the platform bus, since it uses the pm_generic_runtime_suspend|resume functions as runtime PM callbacks. Cc: Kevin Hilman <khilman@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-03PM / Runtime: Rework the "runtime idle" helper routineRafael J. Wysocki1-2/+0
The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-02-24pm / runtime: introduce pm_runtime_set_memalloc_noio()Ming Lei1-0/+3
Introduce the flag memalloc_noio in 'struct dev_pm_info' to help PM core to teach mm not allocating memory with GFP_KERNEL flag for avoiding probable deadlock. As explained in the comment, any GFP_KERNEL allocation inside runtime_resume() or runtime_suspend() on any one of device in the path from one block or network device to the root device in the device tree may cause deadlock, the introduced pm_runtime_set_memalloc_noio() sets or clears the flag on device in the path recursively. Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: Jiri Kosina <jiri.kosina@suse.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Decotigny <david.decotigny@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-26PM / Runtime: Add new helper function: pm_runtime_active()ShuoX Liu1-0/+7
This boolean function simply returns whether or not the runtime status of the device is 'active'. The typical scenario is driver calls pm_runtime_get firstly, then check pm_runtime_active in atomic environment. Also add entry to Documentation/power/runtime.txt Signed-off-by: Yanmin Zhang <yanmin.zhang@intel.com> Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-05-01PM / Runtime: Remove device fields related to suspend time, v2Rafael J. Wysocki1-3/+0
After the previous changes in default_stop_ok() and default_power_down_ok() for PM domains, there are two fields in struct dev_pm_info that aren't necessary any more, suspend_time and max_time_suspended_ns. Remove those fields along with all of the code that accesses them, which simplifies the runtime PM framework quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-02PM / Runtime: Use device PM QoS constraints (v2)Rafael J. Wysocki1-0/+5
Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-18PM Sleep: Do not extend wakeup paths to devices with ignore_children setRafael J. Wysocki1-6/+0
Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-01pm_runtime.h: explicitly requires notifier.hPaul Gortmaker1-0/+1
This file was getting notifier.h via device.h --> module.h but the module.h inclusion is going away, so add notifier.h directly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-25PM: Move clock-related definitions and headers to separate fileRafael J. Wysocki1-56/+0
Since the PM clock management code in drivers/base/power/clock_ops.c is used for both runtime PM and system suspend/hibernation, the definitions of data structures and headers related to it should not be located in include/linux/pm_rumtime.h. Move them to a separate header file. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25PM / Domains: Use power.sybsys_data to reduce overheadRafael J. Wysocki1-0/+10
Currently pm_genpd_runtime_resume() has to walk the list of devices from the device's PM domain to find the corresponding device list object containing the need_restore field to check if the driver's .runtime_resume() callback should be executed for the device. This is suboptimal and can be simplified by using power.sybsys_data to store device information used by the generic PM domains code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25PM: Introduce struct pm_subsys_dataRafael J. Wysocki1-2/+6
Introduce struct pm_subsys_data that may be subclassed by subsystems to store subsystem-specific information related to the device. Move the clock management fields accessed through the power.subsys_data pointer in struct device to the new strucutre. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12PM / Runtime: Add new helper function: pm_runtime_status_suspended()Kevin Hilman1-0/+6
This boolean function simply returns whether or not the runtime status of the device is 'suspended'. Unlike pm_runtime_suspended(), this function returns the runtime status whether or not runtime PM for the device has been disabled or not. Also add entry to Documentation/power/runtime.txt Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02PM: Rename clock management functionsRafael J. Wysocki1-14/+14
The common PM clock management functions may be used for system suspend/resume as well as for runtime PM, so rename them accordingly. Modify kerneldoc comments describing these functions and kernel messages printed by them, so that they refer to power management in general rather that to runtime PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM: Allow the clocks management code to be used during system suspendRafael J. Wysocki1-1/+1
The common clocks management code in drivers/base/power/clock_ops.c is going to be used during system-wide power transitions as well as for runtime PM, so it shouldn't depend on CONFIG_PM_RUNTIME. However, the suspend/resume functions provided by it for CONFIG_PM_RUNTIME unset, to be used during system-wide power transitions, should not behave in the same way as their counterparts defined for CONFIG_PM_RUNTIME set, because in that case the clocks are managed differently at run time. The names of the functions still contain the word "runtime" after this change, but that is going to be modified by a separate patch later. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: Rename struct dev_power_domain to struct dev_pm_domainRafael J. Wysocki1-1/+1
The naming convention used by commit 7538e3db6e015e890825fbd9f86599b (PM: Add support for device power domains), which introduced the struct dev_power_domain type for representing device power domains, evidently confuses some developers who tend to think that objects of this type must correspond to "power domains" as defined by hardware, which is not the case. Namely, at the kernel level, a struct dev_power_domain object can represent arbitrary set of devices that are mutually dependent power management-wise and need not belong to one hardware power domain. To avoid that confusion, rename struct dev_power_domain to struct dev_pm_domain and rename the related pointers in struct device and struct pm_clk_notifier_block from pwr_domain to pm_domain. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
2011-04-30PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)Rafael J. Wysocki1-0/+42
Many different platforms and subsystems may want to disable device clocks during suspend and enable them during resume which is going to be done in a very similar way in all those cases. For this reason, provide generic routines for the manipulation of device clocks during suspend and resume. Convert the ARM shmobile platform to using the new routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15PM: Do not create wakeup sysfs files for devices that cannot wake upRafael J. Wysocki1-0/+6
Currently, wakeup sysfs attributes are created for all devices, regardless of whether or not they are wakeup-capable. This is excessive and complicates wakeup device identification from user space (i.e. to identify wakeup-capable devices user space has to read /sys/devices/.../power/wakeup for all devices and see if they are not empty). Fix this issue by avoiding to create wakeup sysfs files for devices that cannot wake up the system from sleep states (i.e. whose power.can_wakeup flags are unset during registration) and modify device_set_wakeup_capable() so that it adds (or removes) the relevant sysfs attributes if a device's wakeup capability status is changed. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionallyRafael J. Wysocki1-0/+6
The __pm_generic_resume() function changes the given device's runtime PM status to RPM_ACTIVE if its driver's callback returns 0, but it only should do that if the rumtime PM is enabled for the device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)Alan Stern1-0/+7
This patch (as1431c) makes the synchronous runtime-PM interface suitable for use in interrupt handlers. Subsystems can call the new pm_runtime_irq_safe() function to tell the PM core that a device's runtime_suspend and runtime_resume callbacks should be invoked with interrupts disabled and the spinlock held. This permits the pm_runtime_get_sync() and the new pm_runtime_put_sync_suspend() routines to be called from within interrupt handlers. When a device is declared irq-safe in this way, the PM core increments the parent's usage count, so the parent will never be runtime suspended. This prevents difficult situations in which an irq-safe device can't resume because it is forced to wait for its non-irq-safe parent. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-16PM / Runtime: Fix pm_runtime_suspended()Rafael J. Wysocki1-1/+2
There are some situations (e.g. in __pm_generic_call()), where pm_runtime_suspended() is used to decide whether or not to execute a device's (system) ->suspend() callback. The callback is not executed if pm_runtime_suspended() returns true, but it does so for devices that don't even support runtime PM, because the power.disable_depth device field is ignored by it. This leads to problems (i.e. devices are not suspened when they should), so rework pm_runtime_suspended() so that it returns false if the device's power.disable_depth field is different from zero. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
2010-10-17PM: runtime: add missed pm_request_autosuspendMing Lei1-0/+5
The patch "PM / Runtime: Implement autosuspend support" introduces "autosuspend" facility for runtime PM, but misses helper function of pm_request_autosuspend, so add it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17PM / Runtime: Implement autosuspend supportAlan Stern1-0/+45
This patch (as1427) implements the "autosuspend" facility for runtime PM. A few new fields are added to the dev_pm_info structure and several new PM helper functions are defined, for telling the PM core whether or not a device uses autosuspend, for setting the autosuspend delay, and for marking periods of device activity. Drivers that do not want to use autosuspend can continue using the same helper functions as before; their behavior will not change. In addition, drivers supporting autosuspend can also call the old helper functions to get the old behavior. The details are all explained in Documentation/power/runtime_pm.txt and Documentation/ABI/testing/sysfs-devices-power. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17PM / Runtime: Add no_callbacks flagAlan Stern1-0/+2
Some devices, such as USB interfaces, cannot be power-managed independently of their parents, i.e., they cannot be put in low power while the parent remains at full power. This patch (as1425) creates a new "no_callbacks" flag, which tells the PM core not to invoke the runtime-PM callback routines for the such devices but instead to assume that the callbacks always succeed. In addition, the non-debugging runtime-PM sysfs attributes for the devices are removed, since they are pretty much meaningless. The advantage of this scheme comes not so much from avoiding the callbacks themselves, but rather from the fact that without the need for a process context in which to run the callbacks, more work can be done in interrupt context. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17PM / Runtime: Combine runtime PM entry pointsAlan Stern1-20/+46
This patch (as1424) combines the various public entry points for the runtime PM routines into three simple functions: one for idle, one for suspend, and one for resume. A new bitflag specifies whether or not to increment or decrement the usage_count field. The new entry points are named __pm_runtime_idle, __pm_runtime_suspend, and __pm_runtime_resume, to reflect that they are trampolines. Simultaneously, the corresponding internal routines are renamed to rpm_idle, rpm_suspend, and rpm_resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17PM / Runtime: Replace boolean arguments with bitflagsAlan Stern1-8/+15
The "from_wq" argument in __pm_runtime_suspend() and __pm_runtime_resume() supposedly indicates whether or not the function was called by the PM workqueue thread, but in fact it isn't always used this way. It really indicates whether or not the function should return early if the requested operation is already in progress. Along with this badly-named boolean argument, later patches in this series will add several other boolean arguments to these functions and others. Therefore this patch (as1422) begins the conversion process by replacing from_wq with a bitflag argument. The same bitflags are also used in __pm_runtime_get() and __pm_runtime_put(), where they indicate whether or not the operation should be asynchronous. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-11i2c: Fix bus-level power management callbacksRafael J. Wysocki1-0/+7
There are three issues with the i2c bus type's power management callbacks at the moment. First, they don't include any hibernate callbacks, although they should at least include the .restore() callback (there's no guarantee that the driver will be present in memory before loading the image kernel and we must restore the pre-hibernation state of the device). Second, the "legacy" callbacks are not going to be invoked by the PM core since the bus type's pm object is not NULL. Finally, the system sleep PM (ie. suspend/resume) callbacks don't check if the device has been already suspended at run time, in which case they should skip suspending it. Also, it looks like the i2c bus type can use the generic subsystem-level runtime PM callbacks. For these reasons, rework the system sleep PM callbacks provided by the i2c bus type to handle hibernation correctly and to invoke the "legacy" callbacks for drivers that provide them. In addition to that make the i2c bus type use the generic subsystem-level runtime PM callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-03-06PM: Provide generic subsystem-level callbacksRafael J. Wysocki1-0/+6
There are subsystems whose power management callbacks only need to invoke the callbacks provided by device drivers. Still, their system sleep PM callbacks should play well with the runtime PM callbacks, so that devices suspended at run time can be left in that state for a system sleep transition. Provide a set of generic PM callbacks for such subsystems and define convenience macros for populating dev_pm_ops structures. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26PM / Runtime: Add sysfs switch for disabling device run-time PMRafael J. Wysocki1-0/+4
Add new device sysfs attribute, power/control, allowing the user space to block the run-time power management of the devices. If this attribute is set to "on", the driver of the device won't be able to power manage it at run time (without breaking the rules) and the device will always be in the full power state (except when the entire system goes into a sleep state). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2009-12-06PM: Add flag for devices capable of generating run-time wake-up eventsRafael J. Wysocki1-0/+12
Apparently, there are devices that can wake up the system from sleep states and yet are incapable of generating wake-up events at run time. Thus, introduce a flag indicating if given device is capable of generating run-time wake-up events. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-08-23PM: Introduce core framework for run-time PM of I/O devices (rev. 17)Rafael J. Wysocki1-0/+114
Introduce a core framework for run-time power management of I/O devices. Add device run-time PM fields to 'struct dev_pm_info' and device run-time PM callbacks to 'struct dev_pm_ops'. Introduce a run-time PM workqueue and define some device run-time PM helper functions at the core level. Document all these things. Special thanks to Alan Stern for his help with the design and multiple detailed reviews of the pereceding versions of this patch and to Magnus Damm for testing feedback. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@igel.co.jp>