summaryrefslogtreecommitdiff
path: root/include/linux/netdev_features.h
AgeCommit message (Collapse)AuthorFilesLines
2014-11-06net: Remove MPLS GSO feature.Pravin B Shelar1-4/+1
Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-06udp: Changes to udp_offload to support remote checksum offloadTom Herbert1-1/+3
Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24openvswitch: Enable tunnel GSO for OVS bridge.Pravin B Shelar1-0/+8
Following patch enables all available tunnel GSO features for OVS bridge device so that ovs can use hardware offloads available to underling device. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
2014-06-15net: Fix GSO constants to match NETIF flagsTom Herbert1-0/+1
Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05gre: Call gso_make_checksumTom Herbert1-0/+2
Call gso_make_checksum. This should have the benefit of using a checksum that may have been previously computed for the packet. This also adds NETIF_F_GSO_GRE_CSUM to differentiate devices that offload GRE GSO with and without the GRE checksum offloaed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: Add GSO support for UDP tunnels with checksumTom Herbert1-0/+1
Added a new netif feature for GSO_UDP_TUNNEL_CSUM. This indicates that a device is capable of computing the UDP checksum in the encapsulating header of a UDP tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03net: add busy_poll device featureJiri Pirko1-0/+2
Currently there is no way how to find out if a device supports busy polling. So add a feature and make it dependent on ndo_busy_poll existence. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29vlan: Warn the user if lowerdev has bad vlan features.Vlad Yasevich1-0/+7
Some drivers incorrectly assign vlan acceleration features to vlan_features thus causing issues for Q-in-Q vlan configurations. Warn the user of such cases. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08net: Add layer 2 hardware acceleration operations for macvlan devicesJohn Fastabend1-0/+2
Add a operations structure that allows a network interface to export the fact that it supports package forwarding in hardware between physical interfaces and other mac layer devices assigned to it (such as macvlans). This operaions structure can be used by virtual mac devices to bypass software switching so that forwarding can be done in hardware more efficiently. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22ipv6: sit: add GSO/TSO supportEric Dumazet1-0/+2
Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20ipip: add GSO/TSO supportEric Dumazet1-0/+2
Now inet_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for IPIP Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO IPIP support) : Before patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3357.88 5.09 3.70 2.983 2.167 After patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 7710.19 4.52 6.62 1.152 1.687 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28MPLS: Add limited GSO supportSimon Horman1-1/+3
In the case where a non-MPLS packet is received and an MPLS stack is added it may well be the case that the original skb is GSO but the NIC used for transmit does not support GSO of MPLS packets. The aim of this code is to provide GSO in software for MPLS packets whose skbs are GSO. SKB Usage: When an implementation adds an MPLS stack to a non-MPLS packet it should do the following to skb metadata: * Set skb->inner_protocol to the old non-MPLS ethertype of the packet. skb->inner_protocol is added by this patch. * Set skb->protocol to the new MPLS ethertype of the packet. * Set skb->network_header to correspond to the end of the L3 header, including the MPLS label stack. I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to kernel" which adds MPLS support to the kernel datapath of Open vSwtich. That patch sets the above requirements in datapath/actions.c:push_mpls() and was used to exercise this code. The datapath patch is against the Open vSwtich tree but it is intended that it be added to the Open vSwtich code present in the mainline Linux kernel at some point. Features: I believe that the approach that I have taken is at least partially consistent with the handling of other protocols. Jesse, I understand that you have some ideas here. I am more than happy to change my implementation. This patch adds dev->mpls_features which may be used by devices to advertise features supported for MPLS packets. A new NETIF_F_MPLS_GSO feature is added for devices which support hardware MPLS GSO offload. Currently no devices support this and MPLS GSO always falls back to software. Alternate Implementation: One possible alternate implementation is to teach netif_skb_features() and skb_network_protocol() about MPLS, in a similar way to their understanding of VLANs. I believe this would avoid the need for net/mpls/mpls_gso.c and in particular the calls to __skb_push() and __skb_push() in mpls_gso_segment(). I have decided on the implementation in this patch as it should not introduce any overhead in the case where mpls_gso is not compiled into the kernel or inserted as a module. MPLS GSO suggested by Jesse Gross. Based in part on "v4 GRE: Add TCP segmentation offload for GRE" by Pravin B Shelar. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-02net: Restore NETIF_F_* bit ordering.David Miller1-6/+6
Commit 8ad227ff89a7 ("net: vlan: add 802.1ad support") added some new NETIF_F_* features bits, but it added them in the middle of existing values. Userland depends upon the flag bits via the per-netdevice 'flags' sysfs file. So restore the previous ordering by adding the new flags at the end. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19net: vlan: add 802.1ad supportPatrick McHardy1-0/+6
Add support for 802.1ad VLAN devices. This mainly consists of checking for ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check offloading capabilities based on the used protocol. Configuration is done using "ip link": # ip link add link eth0 eth0.1000 \ type vlan proto 802.1ad id 1000 # ip link add link eth0.1000 eth0.1000.1000 \ type vlan proto 802.1q id 1000 52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64 92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84) 20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-6/+6
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17net: fix some typos in netif featuresCong Wang1-2/+2
Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10tunneling: Add generic Tunnel segmentation.Pravin B Shelar1-3/+4
Adds generic tunneling offloading support for IPv4-UDP based tunnels. GSO type is added to request this offload for a skb. netdev feature NETIF_F_UDP_TUNNEL is added for hardware offloaded udp-tunnel support. Currently no device supports this feature, software offload is used. This can be used by tunneling protocols like VXLAN. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-16v4 GRE: Add TCP segmentation offload for GREPravin B Shelar1-1/+2
Following patch adds GRE protocol offload handler so that skb_gso_segment() can segment GRE packets. SKB GSO CB is added to keep track of total header length so that skb_segment can push entire header. e.g. in case of GRE, skb_segment need to push inner and outer headers to every segment. New NETIF_F_GRE_GSO feature is added for devices which support HW GRE TSO offload. Currently none of devices support it therefore GRE GSO always fall backs to software GSO. [ Compute pkt_len before ip_local_out() invocation. -DaveM ] Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24net: Support RX-ALL feature flag.Ben Greear1-0/+2
This flag requests that network devices pass all received frames up the stack, even ones with errors such as invalid FCS (frame check sum). This will allow sniffers to see bad packets and perhaps give the user some idea how to fix the problem. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24net: Support RXFCS feature flag.Ben Greear1-0/+2
When set on hardware that supports the feature, this causes the Ethernet FCS to be appended to the end of the skb. Useful for sniffing packets. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-17net: remove NETIF_F_NO_CSUM feature bitMichał Mirosław1-3/+2
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17net: extend netdev_features_t to 64 bitsMichał Mirosław1-1/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17net: Define enum for net device features.Michał Mirosław1-40/+93
Define feature values by bit position instead of direct 2**i values and force the values to be of type netdev_features_t. Cleaned and extended from patch by Mahesh Bandewar <maheshb@google.com>: + added netdev_features_t casts + included bits under NETIF_F_GSO_MASK + moved feature #defines out of struct net_device definition Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17net: introduce and use netdev_features_t for device features setsMichał Mirosław1-0/+4
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17net: split netdev features to separate headerMichał Mirosław1-0/+90
Move features definitions to separate header so that linux/skbuff.h won't need to include linux/netdevice.h after netdev_features_t is introduced. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 16:23:34 +0300