summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)AuthorFilesLines
2012-02-03mfd: Store twl6040-codec mclk configurationPeter Ujfalusi1-0/+2
Store the last used mclk configuration for the PLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-21MFD: mcp-core: fix mcp_priv() to be more type safeRussell King1-1/+4
mcp_priv() does unexpected things when passed a void pointer. Make it a typed inline function, which ensures that it works correctly in these cases. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp ↵Russell King2-9/+3
bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
2012-01-14Merge branch 'for-next' of ↵Linus Torvalds15-8/+673
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds3-5/+145
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-12Merge git://git.infradead.org/battery-2.6Linus Torvalds1-3/+4
* git://git.infradead.org/battery-2.6: (68 commits) power_supply: Mark da9052 driver as broken power_supply: Drop usage of nowarn variant of sysfs_create_link() s3c_adc_battery: Average over more than one adc sample power_supply: Add DA9052 battery driver isp1704_charger: Fix missing check jz4740-battery: Fix signedness bug power_supply: Assume mains power by default sbs-battery: Fix devicetree match table ARM: rx51: Add bq27200 i2c board info sbs-battery: Change power supply name devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings devicetree-bindings: Add vendor entry for Smart Battery Systems sbs-battery: Rename internals to new name bq20z75: Rename to sbs-battery wm97xx_battery: Use DEFINE_MUTEX() for work_lock max8997_charger: Remove duplicate module.h lp8727_charger: Some minor fixes for the header lp8727_charger: Add header file power_supply: Convert drivers/power/* to use module_platform_driver() power_supply: Add "unknown" in power supply type ...
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds2-1/+30
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits) regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config regulator: max8925: fix enabled/disabled judgement mistake regulator: add regulator_bulk_force_disable function regulator: pass regulator_register of_node in fixed voltage driver regulator: add regulator_force_disable() definition for !CONFIG_REGULATOR regulator: Enable supply regulator if child rail is enabled. regulator: mc13892: Convert to devm_kzalloc() regulator: mc13783: Convert to devm_kzalloc() regulator: Fix checking return value of create_regulator regulator: Fix the error handling if create_regulator fails regulator: Export regulator_is_supported_voltage() regulator: mc13892: add device tree probe support regulator: mc13892: remove the unnecessary prefix from regulator name regulator: Convert wm831x regulator drivers to devm_kzalloc() regulator: da9052: Staticize non-exported symbols regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case for da9052-regulator regulator: Update da9052-regulator for DT changes regulator: DA9052/53 Regulator support regulator: pass device_node to of_get_regulator_init_data() regulator: If a single voltage is set with device tree then set apply_uV ...
2012-01-10Merge git://git.infradead.org/users/cbou/battery-urgentAnton Vorontsov1-1/+2
2012-01-09mfd: Add pm ops to max8925Kevin Liu1-0/+2
Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add S5M core driverSangbeom Kim3-0/+557
S5M series are pmic including mutiple functional devices. It can support PMIC, RTC, Battery charger, codec. This patch implement core driver for s5m series. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 801Viresh Kumar1-0/+1
STMPE801 is a GPIO expander. Registers for 801 are much different from other variants. This patch adds support for STMPE801 in stmpe mfd driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 610Viresh Kumar1-0/+1
STMPE610 is very much like STMPE811, except the number of gpio pins, which is 8 in 811 and 6 in 610. This patch adds support for variant 610. STMPE610 will share most of the code with STMPE811. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Separate out STMPE controller and interface specific codeViresh Kumar1-2/+5
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data and devices for MAX8997 LED controlDonggeun Kim1-1/+24
MAX8997 device does not support LED control function of it. To enable MAX8997-LED driver, platform data and devices for LED are updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij5-0/+0
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add missing mutex.h inclusion to WM8994 core.hMark Brown1-0/+1
struct wm8994 includes a mutex so we need to include mutex.h before we declare it. All current users rely on this being done implicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Constify WM8994 regulator_init_dataMark Brown1-1/+1
The driver has no need to modify the regulator_init_data so declare it const to allow machine code to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.Jochen Friedrich2-3/+9
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fixed unconditional reset of the mc13xxx ADC reading enable bitsRobin van der Gracht1-0/+8
When the ADC is being prepared for a single or multiple channel reading, the adc0 register is reconfigured without taking the lithium cell, charge current and battery current reading enable bits into account. Which results in clearing the bits. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data for MAX8997 MUIC driverDonggeun Kim1-1/+57
Currently, MAX8997 device does not support MUIC function of it. To add MAX8997 MUIC driver, header file should be updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert 88pm860x to use regmap apiJett.Zhou1-1/+2
Convert the 88pm860x normal bank register read/write to use the register map API. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Disable more pulls on WM8994Mark Brown1-0/+6
Disable more pulls by default on WM8994 for a small current saving. Since some designs do leave SPKMODE floating provide platform data to allow that to be left enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for irq over gpio pin to stmpeViresh Kumar1-0/+7
On many boards, stmpe is present as an separate device (not as part of SoC). Here gpio lines are mostly used for getting interrupts. This patch adds in support to handle irq over gpio pin. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-04Merge branch 'power-supply-scope' of ↵Anton Vorontsov19-507/+1525
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
2011-12-22regulator: mc13892: add device tree probe supportShawn Guo1-0/+1
It adds device tree probe support for mc13892-regulator driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15mfd: Declare da9052_regmap_config for the bus driversMark Brown1-0/+2
Fixes build failures. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14MFD: DA9052/53 MFD core moduleAshish Jangam3-0/+918
The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12Merge branch 'mfd/wm8994' of ↵Mark Brown4-6/+108
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3
2011-12-12mfd: Convert wm8994 to use generic regmap irq_chipMark Brown1-2/+1
Factor out the irq_chip implementation, substantially reducing the code size for the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-12mfd: Mark WM1811 GPIO6 register volatile for later revisionsMark Brown1-0/+1
For later chip revisions the WM1811 GPIO6 register is always volatile so store the device revision when initialising the driver and then check at runtime if we're running on a newer device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-12mfd: Add missing mutex.h inclusion to WM8994 core.hMark Brown1-0/+1
struct wm8994 includes a mutex so we need to include mutex.h before we declare it. All current users rely on this being done implicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-12mfd: Constify WM8994 regulator_init_dataMark Brown1-1/+1
The driver has no need to modify the regulator_init_data so declare it const to allow machine code to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-12mfd: Enable register cache for wm8994 devicesMark Brown1-2/+0
As part of this we provide information about the registers that exist in the device to the regmap core, drop the small amount of cache that the core had been using and let regmap do the sync. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-12mfd: Define some additional wm8994 registersMark Brown1-0/+96
Add a bunch of definitions for wm8994 registers that are not currently used by software. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-12mfd: Disable more pulls on WM8994Mark Brown1-0/+6
Disable more pulls by default on WM8994 for a small current saving. Since some designs do leave SPKMODE floating provide platform data to allow that to be left enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-01ASoC: Add platform data for WM8958/WM1811 microphone detection ratesMark Brown1-0/+20
Allow systems to override the default microphone detection rates using platform data in case the settings are not suitable (eg, due to an unusually noisy jack). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-01ASoC: Implement support for WM1811A jack detectionMark Brown1-0/+16
The WM1811A features an advanced low power accessory detection subsystem which allows the device to be maintained in a very low power state while the system is idle without sacrificing any accessory detection features. Implement software support for this, automatically managing the power configuration of the device depending on the detected accessory. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-01ASoC: Allow more WM8958/WM1811 button levels with default handlerMark Brown1-0/+3
The WM8958 and WM1811 support detecting a range of buttons. Allow the user to provide platform data enabling more of these levels without having to write a custom detection handler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25max8925_power: Enable power change notificationsPhilip Rakity1-0/+2
The power core infrastructure allow external power change events to be passed to drivers what are listed in the supplied_to call back field. Enable this feature by allowing the supplied_to field to be passed to the driver. This feature will enable drivers named in the supplied_to field that have a external_power_changed callback to be notified when power was been turned on or off. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: Remove support for irq bits that do not existPhilip Rakity1-3/+0
The max8925 cannot return usb status.  The bits       [MAX8925_IRQ_VCHG_USB_OVP] = {               .reg            = MAX8925_CHG_IRQ1,               .mask_reg       = MAX8925_CHG_IRQ1_MASK,               .offs           = 1 << 3,       },       [MAX8925_IRQ_VCHG_USB_F] =  {               .reg            = MAX8925_CHG_IRQ1,               .mask_reg       = MAX8925_CHG_IRQ1_MASK,               .offs           = 1 << 4,       },       [MAX8925_IRQ_VCHG_USB_R] = {               .reg            = MAX8925_CHG_IRQ1,               .mask_reg       = MAX8925_CHG_IRQ1_MASK,               .offs           = 1 << 5,       }, do not exist in the irq register. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: Do not detect ac insert if handled by other codePhilip Rakity1-0/+1
On brownstone rev 4 ac-insert detect is handled by vbus. allow the platform code to configure the disabling of insert by setting no_insert_detect. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: No temperature interrupts if temperature not connectedPhilip Rakity1-0/+1
Brownstone does not have temperature reading circuit hooked up. This leads to spurious interrupts. Allow the platform layer to indicate no temperature circuit and do not activate interrupts if no temperature control is set Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-23Merge branch 'for-linus' of ↵Mark Brown1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-next
2011-11-23regulator: TPS65910: Fix VDD1/2 voltage selector countAfzal Mohammed1-1/+2
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23regulator: TPS65910: Create an array for init dataKyle Manna1-1/+4
Create an array of fixed size for the platform to pass regulator initalization data through. Passing an array of pointers to init data also allows more flexible definition of init data as well as prevents reading past the end of the array should the platform define an incorrectly sized array. Signed-off-by: Kyle Manna <kyle.manna@fuel7.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23regulator: TPS65910: Move regulator defs to headerKyle Manna1-0/+25
Move the regulator defintions to the header so that platform board file can use them to configure specific regulators. Signed-off-by: Kyle Manna <kyle.manna@fuel7.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08Merge branch 'for-3.2' of ↵Mark Brown1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2
2011-11-05ASoC: Ensure we get an impedence reported for WM8958 jack detectMark Brown1-0/+15
Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds14-466/+1371
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-11-02mfd: Fix missing abx500 header file updatesLinus Walleij1-1/+1
I missed to include a patch adding the new silicon revision define CUT3P3 and remove the retired CUT0 versions of AB8500. Also delete the reference to the retired AB3550 from the header. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 18:45:38 +0300