Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch adds support for dax zero_page_range operation to dm targets.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20200228163456.1587-5-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core to disallow stacking request-based DM on partitions.
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space
for each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive
backing device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
dm: Fix Kconfig indentation
dm thin: wakeup worker only when deferred bios exist
dm integrity: fix excessive alignment of metadata runs
dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
dm zoned: reduce overhead of backing device checks
dm dust: add limited write failure mode
dm dust: change ret to r in dust_map_read and dust_map
dm dust: change result vars to r
dm cache: replace spin_lock_irqsave with spin_lock_irq
dm bio prison: replace spin_lock_irqsave with spin_lock_irq
dm thin: replace spin_lock_irqsave with spin_lock_irq
dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
dm clone: replace spin_lock_irqsave with spin_lock_irq
dm writecache: handle REQ_FUA
dm writecache: fix uninitialized variable warning
dm stripe: use struct_size() in kmalloc()
dm raid: streamline rs_get_progress() and its raid_status() caller side
dm raid: simplify rs_setup_recovery call chain
dm raid: to ensure resynchronization, perform raid set grow in preresume
...
|
|
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct stripe_c {
...
struct stripe stripe[0];
};
In this case alloc_context() and dm_array_too_big() are removed and
replaced by the direct use of the struct_size() helper in kmalloc().
Notice that open-coded form is prone to type mistakes.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull more device mapper updates from Mike Snitzer:
- Fix zone state management race in DM zoned target by eliminating the
unnecessary DMZ_ACTIVE state.
- A couple fixes for issues the DM snapshot target's optional discard
support added during first week of the 5.3 merge.
- Increase default size of outstanding IO that is allowed for a each
dm-kcopyd client and introduce tunable to allow user adjust.
- Update DM core to use printk ratelimiting functions rather than
duplicate them and in doing so fix an issue where DMDEBUG_LIMIT()
rate limited KERN_DEBUG messages had excessive "callbacks suppressed"
messages.
* tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: use printk ratelimiting functions
dm kcopyd: Increase default sub-job size to 512KB
dm snapshot: fix oversights in optional discard support
dm zoned: fix zone state management race
|
|
DM provided its own ratelimiting printk wrapper but given printk
advances this is no longer needed.
Also, switching DMDEBUG_LIMIT to using pr_debug_ratelimited() fixes the
reported issue where DMDEBUG_LIMIT() still caused a flood of "callbacks
suppressed" messages.
Reported-by: Milan Broz <gmazyland@gmail.com>
Depends-on: 29fc2bc7539386 ("printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In
preparation of using vmalloc() for large report buffer and zone array
allocations used by this function, remove its "gfp_t gfp_mask" argument
and rely on the caller context to use memalloc_noio_save/restore() where
necessary (block layer zone revalidation and dm-zoned I/O error path).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via
blk_insert_cloned_request feedback"), map_request() will requeue the tio
when issued clone request return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE.
Thus, if device driver status is error, a tio may be requeued multiple
times until the return value is not DM_MAPIO_REQUEUE. That means
type->start_io may be called multiple times, while type->end_io is only
called when IO complete.
In fact, even without commit 396eaf21ee17, setup_clone() failure can
also cause tio requeue and associated missed call to type->end_io.
The service-time path selector selects path based on in_flight_size,
which is increased by st_start_io() and decreased by st_end_io().
Missed calls to st_end_io() can lead to in_flight_size count error and
will cause the selector to make the wrong choice. In addition,
queue-length path selector will also be affected.
To fix the problem, call type->end_io in ->release_clone_rq before tio
requeue. map_info is passed to ->release_clone_rq() for map_request()
error path that result in requeue.
Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Cc: stable@vger.kernl.org
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add a "create" module parameter, which allows device-mapper targets to
be configured at boot time. This enables early use of DM targets in the
boot process (as the root device or otherwise) without the need of an
initramfs.
The syntax used in the boot param is based on the concise format from
the dmsetup tool to follow the rule of least surprise:
dmsetup table --concise /dev/mapper/lroot
Which is:
dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+]
Where,
<name> ::= The device name.
<uuid> ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | ""
<minor> ::= The device minor number | ""
<flags> ::= "ro" | "rw"
<table> ::= <start_sector> <num_sectors> <target_type> <target_args>
<target_type> ::= "verity" | "linear" | ...
For example, the following could be added in the boot parameters:
dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0
Only the targets that were tested are allowed and the ones that don't
change any block device when the device is create as read-only. For
example, mirror and cache targets are not allowed. The rationale behind
this is that if the user makes a mistake, choosing the wrong device to
be the mirror or the cache can corrupt data.
The only targets initially allowed are:
* crypt
* delay
* linear
* snapshot-origin
* striped
* verity
Co-developed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
A dm-raid array with devices larger than 4GB won't assemble on
a 32 bit host since _check_data_dev_sectors() was added in 4.16.
This is because to_sector() treats its argument as an "unsigned long"
which is 32bits (4GB) on a 32bit host. Using "unsigned long long"
is more correct.
Kernels as early as 4.2 can have other problems due to to_sector()
being used on the size of a device.
Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality")
cc: stable@vger.kernel.org (v4.2+)
Reported-and-tested-by: Guillaume Perréal <gperreal@free.fr>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There is no need to have DM core split discards on behalf of a DM target
now that blk_queue_split() handles splitting discards based on the
queue_limits. A DM target just needs to set max_discard_sectors,
discard_granularity, etc, in queue_limits.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The biggest change this cycle is to remove support for the legacy IO
path (.request_fn) from request-based DM.
Jens has already started preparing for complete removal of the legacy
IO path in 4.21 but this earlier removal of support from DM has been
coordinated with Jens (as evidenced by the commit being attributed to
him).
Making request-based DM exclussively blk-mq only cleans up that
portion of DM core quite nicely.
- Convert the thinp and zoned targets over to using refcount_t where
applicable.
- A couple fixes to the DM zoned target for refcounting and other races
buried in the implementation of metadata block creation and use.
- Small cleanups to remove redundant unlikely() around a couple
WARN_ON_ONCE().
- Simplify how dm-ioctl copies from userspace, eliminating some
potential for a malicious user trying to change the executed ioctl
after its processing has begun.
- Tweaked DM crypt target to use the DM device name when naming the
various workqueues created for a particular DM crypt device (makes
the N workqueues for a DM crypt device more easily understood and
enhances user's accounting capabilities at a glance via "ps")
- Small fixup to remove dead branch in DM writecache's memory_entry().
* tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: remove disabled code in memory_entry()
dm zoned: fix various dmz_get_mblock() issues
dm zoned: fix metadata block ref counting
dm raid: avoid bitmap with raid4/5/6 journal device
dm crypt: make workqueue names device-specific
dm: add dm_table_device_name()
dm ioctl: harden copy_params()'s copy_from_user() from malicious users
dm: remove unnecessary unlikely() around WARN_ON_ONCE()
dm zoned: target: use refcount_t for dm zoned reference counters
dm thin: use refcount_t for thin_c reference counting
dm table: require that request-based DM be layered on blk-mq devices
dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASED
dm: remove legacy request-based IO path
|
|
Dispatching a report zones command through the request queue is a major
pain due to the command reply payload rewriting necessary. Given that
blkdev_report_zones() is executing everything synchronously, implement
report zones as a block device file operation instead, allowing major
simplification of the code in many places.
sd, null-blk, dm-linear and dm-flakey being the only block device
drivers supporting exposing zoned block devices, these drivers are
modified to provide the device side implementation of the
report_zones() block device file operation.
For device mappers, a new report_zones() target type operation is
defined so that the upper block layer calls blkdev_report_zones() can
be propagated down to the underlying devices of the dm targets.
Implementation for this new operation is added to the dm-linear and
dm-flakey targets.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Changed method block_device argument to gendisk
* Various bug fixes and improvements
* Added support for null_blk, dm-linear and dm-flakey.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a shortcut for dm_device_name(dm_table_get_md(t)).
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Now that request-based DM is only using blk-mq, there is no need to
differentiate between legacy "rq" and new "mq". We're back to a single
request-based DM -- and there was much rejoicing!
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Similar to the ->copy_from_iter() operation, a platform may want to
deploy an architecture or device specific routine for handling reads
from a dax_device like /dev/pmemX. On x86 this routine will point to a
machine check safe version of copy_to_iter(). For now, add the plumbing
to device-mapper and the dax core.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- DM core passthrough ioctl fix to retain reference to DM table, and
that table's block devices, while issuing the ioctl to one of those
block devices.
- DM core passthrough ioctl fix to _not_ override the fmode_t used to
issue the ioctl. Overriding by using the fmode_t that the block
device was originally open with during DM table load is a liability.
- Add DM core support for secure erase forwarding and update the DM
linear and DM striped targets to support them.
- A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
same, write zeroes) for targets that make use of the non-splitting IO
variant (as is done for multipath or thinp when layered directly on
NVMe).
- Allow DM targets to return a payload in response to a DM message that
they are sent. This is useful for DM targets that would like to
provide statistics data in response to DM messages.
- Update DM bufio to support non-power-of-2 block sizes. Numerous other
related changes prepare the DM bufio code for this support.
- Fix DM crypt to use a bounded amount of memory across the entire
system. This is to avoid OOM that can otherwise occur in response to
certain pathological IO workloads (e.g. discarding a large DM crypt
device).
- Add a 'check_at_most_once' feature to the DM verity target to allow
verity to be used on mobile devices that have very limited resources.
- Fix the DM integrity target to fail early if a keyed algorithm (e.g.
HMAC) is to be used but the key isn't set.
- Add non-power-of-2 support to the DM unstripe target.
- Eliminate the use of a Variable Length Array in the DM stripe target.
- Update the DM log-writes target to record metadata (REQ_META flag).
- DM raid fixes for its nosync status and some variable range issues.
* tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: remove fmode_t argument from .prepare_ioctl hook
dm: hold DM table for duration of ioctl rather than use blkdev_get
dm raid: fix parse_raid_params() variable range issue
dm verity: make verity_for_io_block static
dm verity: add 'check_at_most_once' option to only validate hashes once
dm bufio: don't embed a bio in the dm_buffer structure
dm bufio: support non-power-of-two block sizes
dm bufio: use slab cache for dm_buffer structure allocations
dm bufio: reorder fields in dm_buffer structure
dm bufio: relax alignment constraint on slab cache
dm bufio: remove code that merges slab caches
dm bufio: get rid of slab cache name allocations
dm bufio: move dm-bufio.h to include/linux/
dm bufio: delete outdated comment
dm: add support for secure erase forwarding
dm: backfill abnormal IO support to non-splitting IO submission
dm raid: fix nosync status
dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios()
dm stripe: get rid of a Variable Length Array (VLA)
dm log writes: record metadata flag for better flags record
...
|
|
Use the fmode_t that is passed to dm_blk_ioctl() rather than
inconsistently (varies across targets) drop it on the floor by
overriding it with the fmode_t stored in 'struct dm_dev'.
All the persistent reservation functions weren't using the fmode_t they
got back from .prepare_ioctl so remove them.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Set QUEUE_FLAG_SECERASE in DM device's queue_flags if a DM table's
data devices support secure erase.
Also, add support for secure erase to both the linear and striped
targets.
Signed-off-by: Denis Semakin <d.semakin@omprussia.ru>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Could be useful for a target to return stats or other information.
If a target does DMEMIT() anything to @result from its .message method
then it must return 1 to the caller.
Signed-off-By: Mike Snitzer <snitzer@redhat.com>
|
|
It happens often while I'm preparing a patch for a block driver that
I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT
available for this driver? Do I have to introduce definitions of these
constants before I can use these constants? To avoid this confusion,
move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the
<linux/blkdev.h> header file such that these become available for all
block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h
header file conditional to avoid that including that header file after
<linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE
redefinition.
Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have
not been removed from uapi header files nor from NAND drivers in
which these constants are used for another purpose than converting
block layer offsets and sizes into a number of sectors.
Cc: David S. Miller <davem@davemloft.net>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add DM_ENDIO_DELAY_REQUEUE to allow request-based multipath's
multipath_end_io() to instruct dm-rq.c:dm_done() to delay a requeue.
This is beneficial to do if BLK_STS_RESOURCE is returned from the target
(because target is busy).
Relative to blk-mq: kick the hw queues via blk_mq_requeue_work(),
indirectly from dm-rq.c:__dm_mq_kick_requeue_list(), after a delay.
For old .request_fn: use blk_delay_queue().
bio-based multipath doesn't have feature parity with request-based for
retryable error requeues; that is something that'll need fixing in the
future.
Suggested-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Bart Van Assche <bart.vanassche@wdc.com>
[as interpreted from Bart's "... patch looks fine to me."]
|
|
If anyone is going to use dm_table_create(), they probably should be
able to use dm_table_destroy() too. Move the dm_table_destroy()
definition outside the private header, near dm_table_create()
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If dm_table_determine_type() establishes DM_TYPE_NVME_BIO_BASED then
all devices in the DM table do not support partial completions. Also,
the table has a single immutable target that doesn't require DM core to
split bios.
This will enable adding NVMe optimizations to bio-based DM.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Eliminates need for a separate mempool to allocate 'struct dm_io'
objects from. As such, it saves an extra mempool allocation for each
original bio that DM core is issued.
This complicates the per-bio-data accessor functions by needing to
conditonally add extra padding to get to a target's per-bio-data. But
in the end this provides a decent performance improvement for all
bio-based DM devices.
On an NVMe-loop based testbed to a ramdisk (~3100 MB/s): bio-based
DM linear performance improved by 2% (went from 2665 to 2777 MB/s).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
No DM target provides num_write_bios and none has since dm-cache's
brief use in 2013.
Having the possibility of num_write_bios > 1 complicates bio
allocation. So remove the interface and assume there is only one bio
needed.
If a target ever needs more, it must provide a suitable bioset and
allocate itself based on its particular needs.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Commit abebfbe2f731 ("dm: add ->flush() dax operation support") is
buggy. A DM device may be composed of multiple underlying devices and
all of them need to be flushed. That commit just routes the flush
request to the first device and ignores the other devices.
It could be fixed by adding more complex logic to the device mapper. But
there is only one implementation of the method pmem_dax_ops->flush - that
is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we
don't need the pmem_dax_ops->flush abstraction at all, we can call
arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush
can't ever reach anything different from arch_wb_cache_pmem().
It should be also pointed out that for some uses of persistent memory it
is needed to flush only a very small amount of data (such as 1 cacheline),
and it would be overkill if we go through that device mapper machinery for
a single flushed cache line.
Fix this by removing the pmem_dax_ops->flush abstraction and call
arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device
mapper code that forwards the flushes.
Fixes: abebfbe2f731 ("dm: add ->flush() dax operation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The arrays of 'struct dm_arg' are never modified by the device-mapper
core, so constify them so that they are placed in .rodata.
(Exception: the args array in dm-raid cannot be constified because it is
allocated on the stack and modified.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.
Fixes: 71a16736a15e ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"libnvdimm updates for the latest ACPI and UEFI specifications. This
pull request also includes new 'struct dax_operations' enabling to
undo the abuse of copy_user_nocache() for copy operations to pmem.
The dax work originally missed 4.12 to address concerns raised by Al.
Summary:
- Introduce the _flushcache() family of memory copy helpers and use
them for persistent memory write operations on x86. The
_flushcache() semantic indicates that the cache is either bypassed
for the copy operation (movnt) or any lines dirtied by the copy
operation are written back (clwb, clflushopt, or clflush).
- Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
- Add support for the new NVDIMM platform/firmware mechanisms
introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
namespace label format, extensions to the address-range-scrub
command set, new error injection commands, and a new BTT
(block-translation-table) layout. These updates support inter-OS
and pre-OS compatibility.
- Fix a longstanding memory corruption bug in nfit_test.
- Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
- Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed: commit
6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks'
sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
<toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
libnvdimm, namespace: record 'lbasize' for pmem namespaces
acpi/nfit: Issue Start ARS to retrieve existing records
libnvdimm: New ACPI 6.2 DSM functions
acpi, nfit: Show bus_dsm_mask in sysfs
libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
acpi, nfit: Enable DSM pass thru for root functions.
libnvdimm: passthru functions clear to send
libnvdimm, btt: convert some info messages to warn/err
libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
libnvdimm: fix the clear-error check in nsio_rw_bytes
libnvdimm, btt: fix btt_rw_page not returning errors
acpi, nfit: quiet invalid block-aperture-region warnings
libnvdimm, btt: BTT updates for UEFI 2.7 format
acpi, nfit: constify *_attribute_group
libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
libnvdimm, pmem, dax: export a cache control attribute
dax: convert to bitmask for flags
dax: remove default copy_from_iter fallback
libnvdimm, nfit: enable support for volatile ranges
libnvdimm, pmem: fix persistence warning
...
|
|
A target driver support zoned block devices and exposing it as such may
receive REQ_OP_ZONE_REPORT request for the user to determine the mapped
device zone configuration. To process properly such request, the target
driver may need to remap the zone descriptors provided in the report
reply. The helper function dm_remap_zone_report() does this generically
using only the target start offset and length and the start offset
within the target device.
dm_remap_zone_report() will remap the start sector of all zones
reported. If the report includes sequential zones, the write pointer
position of these zones will also be remapped.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
1) Introduce DM_TARGET_ZONED_HM feature flag:
The target drivers currently available will not operate correctly if a
table target maps onto a host-managed zoned block device.
To avoid problems, introduce the new feature flag DM_TARGET_ZONED_HM to
allow a target to explicitly state that it supports host-managed zoned
block devices. This feature is checked for all targets in a table if
any of the table's block devices are host-managed.
Note that as host-aware zoned block devices are backward compatible with
regular block devices, they can be used by any of the current target
types. This new feature is thus restricted to host-managed zoned block
devices.
2) Check device area zone alignment:
If a target maps to a zoned block device, check that the device area is
aligned on zone boundaries to avoid problems with REQ_OP_ZONE_RESET
operations (resetting a partially mapped sequential zone would not be
possible). This also facilitates the processing of zone report with
REQ_OP_ZONE_REPORT bios.
3) Check block devices zone model compatibility
When setting the DM device's queue limits, several possibilities exists
for zoned block devices:
1) The DM target driver may want to expose a different zone model
(e.g. host-managed device emulation or regular block device on top of
host-managed zoned block devices)
2) Expose the underlying zone model of the devices as-is
To allow both cases, the underlying block device zone model must be set
in the target limits in dm_set_device_limits() and the compatibility of
all devices checked similarly to the logical block size alignment. For
this last check, introduce validate_hardware_zoned_model() to check that
all targets of a table have the same zone model and that the zone size
of the target devices are equal.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
[Mike Snitzer refactored Damien's original work to simplify the code]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Using pr_<level> is the more common logging style.
Standardize style and use new macro DM_FMT.
Use no_printk in DMDEBUG macros when CONFIG_DM_DEBUG is not #defined.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Allow device-mapper to route flush operations to the
per-target implementation. In order for the device stacking to work we
need a dax_dev and a pgoff relative to that device. This gives each
layer of the stack the information it needs to look up the operation
pointer for the next level.
This conceptually allows for an array of mixed device drivers with
varying flush implementations.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Allow device-mapper to route copy_from_iter operations to the
per-target implementation. In order for the device stacking to work we
need a dax_dev and a pgoff relative to that device. This gives each
layer of the stack the information it needs to look up the operation
pointer for the next level.
This conceptually allows for an array of mixed device drivers with
varying copy_from_iter implementations.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings. This patch
instead introduces a new blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning. Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.
For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.
blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Turn the error paramter into a pointer so that target drivers can change
the value, and make sure only DM_ENDIO_* values are returned from the
methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has been in multiple -next releases. There were a few
late breaking fixes and small features that got added in the last
couple days, but the whole set has received a build success
notification from the kbuild robot.
Change summary:
- Region media error reporting: A libnvdimm region device is the
parent to one or more namespaces. To date, media errors have been
reported via the "badblocks" attribute attached to pmem block
devices for namespaces in "raw" or "memory" mode. Given that
namespaces can be in "device-dax" or "btt-sector" mode this new
interface reports media errors generically, i.e. independent of
namespace modes or state.
This subsequently allows userspace tooling to craft "ACPI 6.1
Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
requests and submit them via the ioctl path for NVDIMM root bus
devices.
- Introduce 'struct dax_device' and 'struct dax_operations': Prompted
by a request from Linus and feedback from Christoph this allows for
dax capable drivers to publish their own custom dax operations.
This fixes the broken assumption that all dax operations are
related to a persistent memory device, and makes it easier for
other architectures and platforms to add customized persistent
memory support.
- 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger
memory controllers to drain write-pending buffers that would
otherwise be flushed automatically by the platform ADR
(asynchronous-DRAM-refresh) mechanism at a power loss event.
Support for "locked" DIMMs is included to prevent namespaces from
surfacing when the namespace label data area is locked. Finally,
fixes for various reported deadlocks and crashes, also tagged for
-stable.
- ACPI / nfit driver updates: General updates of the nfit driver to
add DSM command overrides, ACPI 6.1 health state flags support, DSM
payload debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
- commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock":
Tested-by: Yi Zhang <yizhan@redhat.com>
- commit 23f498448362 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
libnvdimm, pfn: fix 'npfns' vs section alignment
libnvdimm: handle locked label storage areas
libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
brd: fix uninitialized use of brd->dax_dev
block, dax: use correct format string in bdev_dax_supported
device-dax: fix sysfs attribute deadlock
libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
libnvdimm: rework region badblocks clearing
acpi, nfit: kill ACPI_NFIT_DEBUG
libnvdimm: fix clear length of nvdimm_forget_poison()
libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
libnvdimm, region: sysfs trigger for nvdimm_flush()
libnvdimm: fix phys_addr for nvdimm_clear_poison
x86, dax, pmem: remove indirection around memcpy_from_pmem()
block: remove block_device_operations ->direct_access()
block, dax: convert bdev_dax_supported() to dax_direct_access()
filesystem-dax: convert to dax_direct_access()
Revert "block: use DAX for partition table reads"
ext2, ext4, xfs: retrieve dax_device for iomap operations
...
|
|
This untangles the DM_MAPIO_* values returned from ->clone_and_map_rq
from the error codes used by the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Instead of returning either a DM_ENDIO_* constant or an error code, add
a new DM_ENDIO_DONE value that means keep errno as is. This allows us
to easily keep the existing error code in case where we can't push back,
and it also preparares for the new block level status codes with strict
type checking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
|
|
Introduce an enumeration type for the queue mode. This patch does
not change any functionality but makes the DM code easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Arrange for dm to lookup the dax services available from member devices.
Update the dax-capable targets, linear and stripe, to route dax
operations to the underlying device. Changes the target-internal
->direct_access() method to more closely align with the dax_operations
->direct_access() calling convention.
Cc: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A dm-crypt on dm-integrity device incorrectly advertises an integrity
profile on the DM crypt device. It can be seen in the files
"/sys/block/dm-*/integrity/*" that both dm-integrity and dm-crypt target
advertise the integrity profile. That is incorrect, only the
dm-integrity target should advertise the integrity profile.
A general problem in DM is that if we have a DM device that depends on
another device with an integrity profile, the upper device will always
advertise the integrity profile, even when the target driver doesn't
support handling integrity data.
Most targets don't support integrity data, so we provide a whitelist of
targets that support it (linear, delay and striped). The targets that
support passing integrity data to the lower device are marked with the
flag DM_TARGET_PASSES_INTEGRITY. The DM core will now advertise
integrity data on a DM device only if all the targets support the
integrity data.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Allocate a dax_device to represent the capacity of a device-mapper
instance. Provide a ->direct_access() method via the new dax_operations
indirection that mirrors the functionality of the current direct_access
support via block_device_operations. Once fs/dax.c has been converted
to use dax_operations the old dm_blk_direct_access() will be removed.
A new helper dm_dax_get_live_target() is introduced to separate some of
the dm-specifics from the direct_access implementation.
This enabling is only for the top-level dm representation to upper
layers. Converting target direct_access implementations is deferred to a
separate patch.
Cc: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Copy & paste from the REQ_OP_WRITE_SAME code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Add DM_TARGET_INTEGRITY flag that specifies bio integrity metadata is
not inherited but implemented in the target itself.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
DM already calls blk_mq_alloc_request on the request_queue of the
underlying device if it is a blk-mq device. But now that we allow drivers
to allocate additional data and initialize it ahead of time we need to do
the same for all drivers. Doing so and using the new cmd_size
infrastructure in the block layer greatly simplifies the dm-rq and mpath
code, and should also make arbitrary combinations of SQ and MQ devices
with SQ or MQ device mapper tables easily possible as a further step.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|