summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2016-02-02clk: tegra: Add the APB2APE audio clock on Tegra210Jon Hunter1-1/+1
The APB2APE clock for the audio subsystem is required for powering up the audio power domain and accessing the various modules in this subsystem on Tegra210 devices. Add this clock for Tegra210. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-01-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+112
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-21Merge tag 'armsoc-dt' of ↵Linus Torvalds10-3/+69
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
2016-01-16Merge tag 'clk-for-linus-4.5' of ↵Linus Torvalds11-2/+1523
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk framework updates from Michael Turquette: "The clk framework and driver changes for 4.5 look pretty typical. The bulk of the changes are to clk controller drivers, though some improvements to the core and some re-usable blocks/templates also received some love. In this past cycle the clk maintainers developed a good workflow for handling the common case of patch submissions containing a new drivers, new shared Device Tree header and a new Device Tree binding description. This requires coordination with the Device Tree maintainers and with the architecture maintainers (typically the arm-soc tree in our case). This explains the increase in changes to include/dt-bindings/... and to Documentation/devicetree/bindings/clock/... coming from the clk tree. The same commits can be expected to come through those trees on occasion, through the use of shared, immutable branches" * tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: remove duplicated COMMON_CLK_NXP record from clk/Kconfig clk: fix clk-gpio.c with optional clock= DT property clk: rockchip: fix section mismatches with new child-clocks clk: gpio: handle error codes for of_clk_get_parent_count() clk: gpio: fix memory leak clk: shmobile: r8a7795: Add SATA0 clock clk: bcm2835: Add PWM clock support clk: bcm2835: Support for clock parent selection clk: bcm2835: add a round up ability to the clock divisor clk: lpc32xx: add common clock framework driver clk: lpc18xx: add NXP specific COMMON_CLK_NXP configuration symbol dt-bindings: clock: add NXP LPC32xx clock list for consumers dt-bindings: clock: add description of LPC32xx USB clock controller dt-bindings: clock: add description of LPC32xx clock controller clk: rockchip: rk3036: include downstream muxes into fractional dividers clk: add flag for clocks that need to be enabled on rate changes clk: rockchip: Allow the RK3288 SPDIF clocks to change their parent clk: rockchip: include downstream muxes into fractional dividers clk: rockchip: handle mux dependency of fractional dividers clk: bcm2835: Add a driver for the auxiliary peripheral clock gates. ...
2016-01-15Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
2016-01-07Merge tag 'samsung-clk-exynos4-4.5' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Add a Security SubSystem (SSS) clock for Exynos4, needed by exynos-rng driver (Pseudo Random Number Generator). * tag 'samsung-clk-exynos4-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: exynos4: Add SSS gate clock
2016-01-05Merge tag 'tegra-for-4.5-clk' of ↵Michael Turquette1-0/+401
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.5-rc1 This set of changes adds support for the Tegra210 SoC and contains a couple fixes and cleanups.
2015-12-31Merge tag 'samsung-dt-4.5-2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "Samsung DeviceTree updates and improvements for 4.5" from Krzysztof Kozlowski: 1. eMMC/SDIO minor fixes usage of bindings on Snow and Peach Chromebooks. 2. Remove FIMD from Odroid XU3-family because on XU3 it cannot be used yet and on XU3-Lite and XU4 it is not supported. 3. Remove deprecated since June 2013 samsung,exynos5-hdmi. 4. Add support for Pseudo Random Generator on Exynos4 (Trats2 for now). This depends on new SSS clock. 5. Add rotator nodes for Exynos4 and Exynos5. 6. Switch DWC3_1 on Odroid XU3 and XU3-Lite to peripheral mode because now it cannot be used as OTG. 7. Cleanup the G2D usage on Exynos4 and add it to a proper domain in case of Exynos4210. 8. Put MDMA1 in proper domain on Exynos4210 as well. 9. Minor cleanups. * tag 'samsung-dt-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (21 commits) ARM: dts: Unify G2D device node with other devices on exynos4 ARM: dts: Add power domain to G2D device on exynos4210 ARM: dts: MDMA1 device belongs to LCD0 power domain on exynos4210 ARM: dts: Remove unneeded GPIO include in exynos4412-odroidu3 ARM: dts: exynos4210-universal_c210: Disable DMA for UARTs ARM: dts: Use peripheral mode for dwc3_1 on exynos5422-odroidxu3 ARM: dts: Add rotator node on exynos5420 ARM: dts: Add rotator node on exynos5250 ARM: dts: Fix power domain for sysmmu-rotator device on exynos4 ARM: dts: Add rotator nodes on exynos4 ARM: dts: Enable PRNG module on exynos4412-trats2 ARM: dts: Add PRNG module for exynos4 dt-bindings: remove deprecated compatible string from exynos-hdmi ARM: dts: Remove fimd node from exynos5422-odroidxu3-common ARM: dts: Mark eMMC as non-removable in exynos5250-snow-common ARM: dts: Remove broken-cd from eMMC node in exynos5420-peach-pi ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi ARM: dts: Mark SDIO as non-removable in exynos5250-snow-common ARM: dts: Mark SDIO as non-removable in exynos5420-peach-pit ARM: dts: Mark SDIO as non-removable in exynos5800-peach-pi ...
2015-12-31Merge tag 'bcm2835-drivers-next-2015-12-28' of ↵Arnd Bergmann1-0/+41
http://github.com/anholt/linux into next/drivers Pull "BCM2835 drivers changes for 4.5" from Eric Anholt: This pull request includes the bcm2835 changes for 4.5 targeting the arm-soc next/drivers branch. * tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux: ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware.
2015-12-31Merge tag 'omap-for-v4.5/81xx-dts-signed' of ↵Arnd Bergmann2-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "reworked dts changes for ti81xx devices and minimal dra62x j5ec-evm support" from Tony Lindgren: Add minimal device tree support for dra62x also known j5eco. It is related to dm814x, just the clocks are a bit different and it has a different set of integrated devices. And let's get some basic dm814x and dra62x devices working as many of the devices are like on am33xx:: - pinctrl using the pinctrl defines as for am33xx - Updated EDMA bindings with support for using exma_xbar - MMC support for dm814x-evm, t410 and dra62x-j5eco-evm - USB support for dm814x-evm, t410 and dra62x-j5eco-evm This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed branch that has dm814x dts fixes interlaced with SoC related fixes to keep things booting. The interlaced SoC and dts fixes were needed because of issues with the device tree defined clocks that just happened to work on bootloader timings for t410 earlier. * tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: Add usb support for j5-eco evm ARM: dts: Add usb support for hp t410 ARM: dts: Add usb support for dm814x-evm ARM: dts: Add usb support for dm814x and dra62x ARM: dts: Enable emmc on hp t410 ARM: dts: Add mmc support for dra62x j5-eco evm ARM: dts: Add mmc support for dm8148-evm ARM: dts: Add mmc device entries for dm814x ARM: dts: Update edma bindings on dm814x to use edma_xbar ARM: dts: Add pinctrl macros for dm814x ARM: dts: Add minimal dra62x j5-eco evm support ARM: dts: Add basic support for dra62x j5-eco SoC ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: dts: Fix dm814x pinctrl address and mask ARM: dts: Fix dm8148 control modules ranges ARM: OMAP2+: Fix timer entries for dm814x ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: OMAP2+: Add DPPLS clock manager for dm814x clk: ti: Add few dm814x clock aliases ...
2015-12-25Merge branch 'clk-bcm2835' into clk-nextMichael Turquette1-1/+2
2015-12-25clk: bcm2835: Add PWM clock supportRemi Pommarel1-1/+2
Register the pwm clock for bcm2835. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-24Merge branch 'clk-lpc32xx' into clk-nextMichael Turquette1-0/+56
2015-12-24dt-bindings: clock: add NXP LPC32xx clock list for consumersVladimir Zapolskiy1-0/+56
The change adds a list of NXP LPC32xx clocks, which can be requested by clock consumers. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-23Merge branch 'clk-bcm2835' into clk-nextMichael Turquette1-0/+17
2015-12-23clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.Eric Anholt1-0/+17
These will be used for enabling UART1, SPI1, and SPI2. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-23ARM: dts: Add pinctrl macros for dm814xTony Lindgren2-0/+49
Let's add the DM814X_IOPAD macro the same way as we have for dm816x and am33xx as this allows comparing the registers with the documentation easily. The pinctrl bits are yet again different on dm814x. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-23Merge tag 'imx-dt-4.5' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree updates for 4.5: - New boards support: imx51-ts4800, imx6q-novena, CompuLab imx7d SoM/SBC, vf610m4-cosmic - Add ADC device support for imx6ul and imx7d - Remove config space from PCIe controller ranges property for i.MX6 - Add Vivante GPU nodes for i.MX6 - Add DCU, LCD, and SATA devices for LS1021A - A series to update Ventana gw5xxx boards getting HDMI and LVDS to work simultaneously and devices like PWM and SPI added - Quite a few random cleanups and minor updates * tag 'imx-dt-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) ARM: dts: imx7d: sbc-imx7: add basic board support ARM: dts: imx7d: cl-som-imx7: add basic module support ARM: dts: TS-4800: add touchscreen support ARM: dts: ts-4800: Add LCD support ARM: dts: imx6q: add Novena board devicetree: bindings: Add vendor prefix for Kosagi ARM: dts: TS-4800: use weim IP to map the FPGA ARM: dts: TS-4800: drop uart rts/cts pin reservations ARM: dts: imx6: add Vivante GPU nodes ARM: dts: imx28: add alternate auart4 pinmux ARM: dts: ls1021a: add sata node to dts ARM: dts: TS-4800: add basic device tree of: documentation: add bindings documentation for TS-4800 of: add vendor prefix for Technologic Systems ARM: dts: imx7d-sdb: add ADC support ARM: dts: imx7d.dtsi: add ADC support ARM: dts: vf-colibri: add CAN support ARM: mxs: dt: cfa10057: fix backlight PWM ARM: dts: imx6qdl: move GIC to right location in DT ARM: dts: imx6qdl: add IPU aliases ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'v4.5-rockchip-dts32-2' of ↵Olof Johansson2-0/+223
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board, support for the efuses on Rockchip socs and some improvements for rk3288 regulators. * tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add the kylin board for rk3036 ARM: dts: rockchip: add the sdio/sdmmc node for rk3036 ARM: dts: rockchip: fix the pinctrl bias settings for rk3036 ARM: dts: rockchip: add eFuse node for rk3188 SoCs ARM: dts: rockchip: add eFuse node for rk3066a SoCs ARM: dts: rockchip: add eFuse config of rk3288 SoC ARM: dts: rockchip: add rk3228-evb board ARM: dts: rockchip: add core rk3228 dtsi clk: rockchip: Add the clock ids of rk3288 eFuses ARM: dts: rockchip: Fix typo in rk3288 sdmmc card detect pin name ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board ARM: dts: rockchip: move the public part to rk3288-evb common ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846 clk: rockchip: add dt-binding header for rk3228 clk: rockchip: add id for mipidsi sclk on rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson2-0/+0
Add regulators to the scpsys binding. Move the include of the reset contoller to include/dt-bindings/reset. Add basic support for mt2701 SoC and evaluation board. * tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: soc: Add supplies for Mediatek SCPSYS unit ARM: mediatek: DT: Move reset controller constants into common location ARM: dts: mediatek: add MT2701 basic support Document: DT: Add bindings for mediatek MT2701 SoC Platform Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'renesas-dt3-for-v4.5' of ↵Olof Johansson2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Third Round of Renesas ARM Based SoC DT Updates for v4.5 * Use SoC-specific usb-dmac and IPMMU compatibility strings * Add internal delay for i2c IPs * Add missing serial devices to r8a7793 * Enable DMA for r8a7793 serial devices * Add serial port config to chosen/stdout-path * Tidyup #sound-dai-cells settings for r8a7798/bockw * Remove deprecated #gpio-range-cells from r8a7793 * Add EtherAVB support to r8a7791 * Add MSIOF support to sh73a0 * tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits) ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings ARM: shmobile: r8a7794: IPMMU compat string SoC part number update ARM: shmobile: r8a7793: IPMMU compat string SoC part number update ARM: shmobile: r8a7791: IPMMU compat string SoC part number update ARM: shmobile: r8a7790: IPMMU compat string SoC part number update ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7793: Describe DMA for the serial ports ARM: shmobile: r8a7793: Add missing serial devices to DT ARM: shmobile: lager dts: Add serial port config to chosen/stdout-path ARM: shmobile: porter dts: Add serial port config to chosen/stdout-path ARM: shmobile: silk dts: Add serial port config to chosen/stdout-path ARM: shmobile: gose dts: Add serial port config to chosen/stdout-path ARM: shmobile: bockw dts: Update console parameters ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-path ARM: shmobile: r8a7778: tidyup #sound-dai-cells settings ARM: shmobile: bockw dts: Override #sound-dai-cells to zero ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'clk-samsung-4.5' of git://linuxtv.org/snawrocki/samsung into clk-nextMichael Turquette1-0/+4
drivers/clk/samsung updates (mostly bug fixes): - instantiation of the cpu clocks and addition of the GSCL IP parent clocks to the list of available consumer clocks for exynos542x SoCs; - MFC IP parent clock fix for exynos542x; - fix of locking bug in samsung/clk-cpu.c which caused system crashes with cpufreq enabled; - minor cleanup for s3c2410.
2015-12-22Merge tag 'imx-clk-v4.5' of ↵Michael Turquette1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next The i.MX clock updates for 4.5: - Add is_prepared function callback for pllv3 clock driver - Use imx_check_clocks() on imx6ul and imx7d clock drivers to save some code - Add a core clock for imx7d to support generic cpufreq driver - Support imx6q clock routing with OSC to anaclk2/2b - To support more precise pixel clocks on imx5, allow ipu_di_sel clock selectors to influence the PLLs that they are derived from - A cleanup on imx25 OSC clock
2015-12-22Merge tag 'v4.5-rockchip-clk1_1' of ↵Michael Turquette3-0/+417
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Rockchip clock changes for 4.5 containing - a new pll-type used on rk3036 and other Cortex-A7 socs - new clock-trees for rk3036 and rk3228 - switch rk3288 plls to slow mode on reboot - a bunch of new clock ids - some more critical clocks - wrong register offsets for the rk3368 cpuclks - allowing more than 2 parents for the cpuclk
2015-12-22ARM: bcm2835: add rpi power domain driverAlexander Aring1-0/+41
This patch adds support for several power domains on Raspberry Pi, including USB (so it can be enabled even if the bootloader didn't do it), and graphics. This patch is the combined work of Eric Anholt (who wrote USB support inside of the Raspberry Pi firmware driver, and wrote the non-USB domain support) and Alexander Aring (who separated the original USB work out from the firmware driver). Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org>
2015-12-16clk: samsung: exynos5420: add cpu clock configuration data and instantiate ↵Thomas Abraham1-0/+2
cpu clock With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos5420. Changes by Bartlomiej: - split Exynos5420 support from the original patches - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16clk: samsung: exynos542x: add missing parent GSCL block clocksMarek Szyprowski1-0/+2
This patch adds clocks, which are required for preserving parent clock configuration on GSCL power domain on/off. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-12clk: rockchip: Add the clock ids of rk3288 eFusesZhengShunQian1-0/+2
Add clock-ids for the two efuse blocks of the rk3288. Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-12Merge tag 'omap-for-v4.5/dt-pt1' of ↵Arnd Bergmann3-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "Device tree changes for omaps for v4.5 merge window" from Tony Lindgren: - Update all omaps to use pinctrl macros. This makes comparing the pinmux settings against the documentation much earlier. Javier compared the checksums of the generated dtb files to make sure nothing changed for the dtb files. - Updates for dm816x - Add GPMC DMA channels for am437x - Updates for LogicPD Torpedo - Basic support for CompuLab cm-t335 - Remove tps65217.dtsi file, we're better off adding SoC generic board dtsi files for the common features - Add support for ELM on am33xx - Add support for Bosch shc c3 board - Add qspi aliases for am437x and dra7 - Wake-up support for dra7-evm uart1 - Basic support for CompuLab sbc-t43 - Basic support for CompuLab cl-som-am57x - Use MMC pwrseq for libertas WLAN on igep0020 and igep0030 * tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (97 commits) ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs ARM: dts: am57xx: sbc-am57x: add HDMI support ARM: dts: am57xx: compulab-sb-som: add HDMI connector ARM: dts: am57xx: sbc-am57x: add LCD support ARM: dts: am57xx: sbc-am57x: add GPIO expander support ARM: dts: am57xx: sbc-am57x: add EEPROM support ARM: dts: am57xx: sbc-am57x: add usb vbus pinmux ARM: dts: am57xx: cl-som-am57x: add MMC1 support ARM: dts: am57xx: sbc-am57x: add basic board support ARM: dts: am57xx: cl-som-am57x: add analog audio support ARM: dts: am57xx: cl-som-am57x: add touchscreen support ARM: dts: am57xx: cl-som-am57x: add USB support ARM: dts: am57xx: cl-som-am57x: add dual EMAC support ARM: dts: am57xx: cl-som-am57x: add spi-flash support ARM: dts: am57xx: cl-som-am57x: add eMMC support ARM: dts: am57xx: cl-som-am57x: add EEPROM support ARM: dts: am57xx: cl-som-am57x: add I2C3 support ARM: dts: am57xx: cl-som-am57x: dts: add RTC support ...
2015-12-12Merge tag 'v4.5-rockchip-dts32-1' of ↵Arnd Bergmann2-0/+194
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "rockchip dts32 changes for 4.5" from Heiko Stuebner: First round of arm devicetree changes. Among the bigger changes are two new Veyron boards, support for the dual-core cortex-a7 rk3036 soc and addition of support for the crypto engine of the rk3288. Smaller changes include some IR receivers, updates of thermal settings more reflecting real- life and testing-results. * tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add gpio-ir-receiver to the R89 board ARM: dts: rockchip: add touchscreen node to veyron minnie ARM: dts: rockchip: add veyron-mickey board ARM: dts: rockchip: add veyron-brain board ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron ARM: dts: rockchip: override thermal settings on veyron-speedy ARM: dts: rockchip: update the thermal management on rk3288 ARM: dts: rockchip: Add Crypto node for rk3288 ARM: dts: rockchip: add rk3036-evb board ARM: dts: rockchip: add core rk3036 dtsi clk: rockchip: add dt-binding header for rk3036 clk: rockchip: add an id for rk3288 crypto clk ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 Square ARM: dts: rockchip: add channels properties for i2s ARM: dts: rockchip: set system-power-controller property on rk3288-rock2 ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot ARM: dts: rockchip: Setup rk3288 ethernet0 alias for u-boot
2015-12-10Merge tag 'renesas-dt-for-v4.5' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Renesas ARM Based SoC DT Updates for v4.5" from Simon Horman: * henninger: Remove as it is now replaced by silk * koelsch: Move SPI partitions to subnode * porter: Add CAN0 and HS-USB support * r8a7793/gose: Add QSPI, PFC support * r8a7793: Add GPIO, DMAC, theral, IPMMU support * r8a7794/alt: Add DU support * r8a7794: Disable all IPMMU nodes by default * r8a779[0134]: Use Use SoC specific binding for rcar-dmac * r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with wakeup-source property * r8a779[14]: Correct "gpio-ranges" properties * r8a779[14]: Remove bogus imp_clk node * silk: Add SDHI1 support * tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits) ARM: shmobile: alt: add VIN0, ADV7180 DT support ARM: shmobile: alt: add I2C1 DT support ARM: shmobile: alt: Add pfc pins to DT ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes ARM: shmobile: r8a7793: Add GPIO nodes to device tree ARM: shmobile: r8a7794: alt: Enable VGA port ARM: shmobile: r8a7794: Add DU node to device tree ARM: shmobile: r8a7794: Add DU0 clock ARM: shmobile: gose: Add QSPI device to DT ARM: shmobile: r8a7793: Add QSPI device to DT ARM: shmobile: r8a7793: Add DMAC devices to DT ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode ARM: shmobile: gose: Configure PFC in DT ARM: shmobile: r8a7793: Add PFC to DT ARM: shmobile: r8a7793: Add thermal device to DT ARM: shmobile: henninger: remove board DT ARM: shmobile: porter: add CAN0 DT support ...
2015-12-10clk: rockchip: add dt-binding header for rk3228Jeffy Chen1-0/+220
Add the dt-bindings header for the rk3228, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-08dt-bindings: fixes some incorrect header guardsAshley Towns2-2/+2
in dt-bindings where the preprocessor #ifndef/#define variables were mismatched. Signed-off-by: Ashley Towns <mail@ashleytowns.id.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-07ARM: shmobile: r8a7791: add EtherAVB clockSergei Shtylyov1-0/+1
Add the EtherAVB clock to the R8A7791 device tree. Based on the commit 63d2d750c902 ("ARM: shmobile: r8a7790: add EtherAVB clocks"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-02clk: imx: Add a virtual arm clk on i.mx7dBai Ping1-1/+2
Add a virtual arm clk to abstract the actual steps when changing the ARM core frequency.So we can using the 'cpufreq-dt' driver on i.MX7D/Solo. Signed-off-by: Bai Ping <b51503@freescale.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-01ARM: shmobile: sh73a0: Add MSIOF clocksGeert Uytterhoeven1-1/+5
The 4 MSIOF clocks are MSTP clocks, and children of the SUB clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-01clk: qcom: Add MSM8996 Multimedia Clock Controller (MMCC) driverStephen Boyd1-0/+285
Add a driver for the multimedia clock controller found on MSM8996 based devices. This should allow most multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-01clk: qcom: Add MSM8996 Global Clock Control (GCC) driverStephen Boyd1-0/+339
Add support for the global clock controller found on MSM8996 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-30pinctrl: Move am4372 and dra7 macros to the the SoC header filesJavier Martinez Canillas3-2/+12
The <dt-bindings/pinctrl/omap.h> header file defines a set of macros for different SoCs families that falls under the OMAP sub-arch, that allow to define the padconf register physical address instead of the register offset from the padconf base. But the am43xx and dra7xx SoCs families have their own pinctrl header file so the DTS using these SoCs aren't able to use the AM4372_IOPAD() and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is not included. Move the macros to the correct header files so can be used by the DTS. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-26clk: rockchip: add id for mipidsi sclk on rk3288Chris Zhong1-0/+1
Adds a new id for the sclk supplying the mipidsi on rk3288 socs. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-24ARM: mediatek: DT: Move reset controller constants into common locationPhilipp Zabel2-0/+0
By popular vote, the DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the mediatek reset constants in there, too, to avoid confusion. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-11-24Merge tag 'v4.4-rc1' into HEADSimon Horman28-525/+601
Linux 4.4-rc1
2015-11-23clk: rockchip: add dt-binding header for rk3036Xing Zheng1-0/+193
Add the dt-bindings header for the rk3036, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-23clk: rockchip: add an id for rk3288 crypto clkZain Wang1-0/+1
Add an id for crypto clk to the binding header, so that it can be called in other part. Signed-off-by: Zain Wang <zain.wang@rock-chips.com> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-20reset: hisilicon: document hisi-hi6220 reset controllers bindingsChen Feng1-0/+67
Add DT bindings documentation for hi6220 SoC reset controller. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org>
2015-11-18clk: samsung: exynos4: Add SSS gate clockKrzysztof Kozlowski1-0/+1
Add a gate clock for controlling all clocks of Security Sub System (SSS). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-17ARM: shmobile: r8a7794: Add DU0 clockLaurent Pinchart1-0/+1
The DU0 clock is an MSTP clock, child of the CPG ZX clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-16ARM: STi: Add DT defines for co-processor reset linesLee Jones1-0/+4
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-16clk: tegra: Add Tegra210 device tree bindingThierry Reding1-0/+401
Add a header file that defines the clock numbers for Tegra210. It is meant to be included by device trees so that they can refer to the clocks by symbolic name instead of numeric value. Also add the device tree binding documentation which is largely the same as for earlier generations of Tegra. Extracted from a larger patch by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-11Merge tag 'armsoc-dt' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 23:46:45 +0300