summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2015-09-09Merge branch 'i2c/for-4.3' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Features: - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx - core: scans DT and assigns wakeup interrupts. no driver changes needed. - core: some refcouting issues fixed and better API for that - core: new helper function for best effort block read emulation - slave framework: proper DT bindings and userspace instantiation - some bigger work for xiic, pxa, omap drivers .. and quite a number of smaller driver fixes, cleanups, improvements" * 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits) i2c: mux: reg Change ioread endianness for readback i2c: mux: reg: fix compilation warnings i2c: mux: reg: simplify register size checking i2c: muxes: fix leaked i2c adapter device node references i2c: allow specifying separate wakeup interrupt in device tree of/irq: export of_get_irq_byname() i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code i2c: Replace I2C_CROS_EC_TUNNEL dependency eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated i2c: core: Add support for best effort block read emulation i2c: lpc2k: add driver i2c: mux: Add register-based mux i2c-mux-reg i2c: dt: describe generic bindings i2c: slave: print warning if slave flag not set i2c: support 10 bit and slave addresses in sysfs 'new_device' i2c: take address space into account when checking for used addresses i2c: apply DT flags when probing i2c: make address check indpendent from client struct i2c: rename address check functions i2c: apply address offset for slaves, too ...
2015-09-06Merge tag 'media/v4.3-1' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25 - new HDMI capture driver: tc358743 - new driver for NetUP DVB new boards (netup_unidvb) - IR support for DVBSky cards (smipcie-ir) - Coda driver has gain macroblock tiling support - Renesas R-Car gains JPEG codec driver - new DVB platform driver for STi boards: c8sectpfe - added documentation for the media core kABI to device-drivers DocBook - lots of driver fixups, cleanups and improvements * tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits) [media] c8sectpfe: Remove select on undefined LIBELF_32 [media] i2c: fix platform_no_drv_owner.cocci warnings [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr() [media] tc358743: only queue subdev notifications if devnode is set [media] tc358743: add missing Kconfig dependency/select [media] c8sectpfe: Use %pad to print 'dma_addr_t' [media] DocBook media: Fix typo "the the" in xml files [media] tc358743: make reset gpio optional [media] tc358743: set direction of reset gpio using devm_gpiod_get [media] dvbdev: document most of the functions/data structs [media] dvb_frontend.h: document the struct dvb_frontend [media] dvb-frontend.h: document struct dtv_frontend_properties [media] dvb-frontend.h: document struct dvb_frontend_ops [media] dvb: Use DVBFE_ALGO_HW where applicable [media] dvb_frontend.h: document struct analog_demod_ops [media] dvb_frontend.h: Document struct dvb_tuner_ops [media] Docbook: Document struct analog_parameters [media] dvb_frontend.h: get rid of dvbfe_modcod [media] add documentation for struct dvb_tuner_info [media] dvb_frontend: document dvb_frontend_tune_settings ...
2015-09-04Merge tag 'mfd-for-linus-4.3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - New Clocksource driver from ST - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms - Add support for Arizona WM8998 and WM1814 - Add support for Dialog Semi DA9062 and DA9063 - Add support for Kontron COMe-bBL6 and COMe-cBW6 - Add support for X-Powers AXP152 - Add support for Atmel, many - Add support for STMPE, many - Add support for USB in X-Powers AXP22X Core Frameworks: - New Base API to traverse devices and their children in reverse order Bug Fixes: - Fix race between runtime-suspend and IRQs - Obtain platform data form more reliable source Fix-ups: - Constifying things - Variable signage changes - Kconfig depends|selects changes - Make use of BIT() macro - Do not supply .owner attribute in *_driver structures - MAINTAINERS entries - Stop using set_irq_flags() - Start using irq_set_chained_handler_and_data() - Export DT device ID structures" * tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: jz4740-adc: Init mask cache in generic IRQ chip mfd: cros_ec: spi: Add OF match table mfd: stmpe: Add OF match table mfd: max77686: Split out regulator part from the DT binding mfd: Add DT binding for Maxim MAX77802 IC mfd: max77686: Use a generic name for the PMIC node in the example mfd: max77686: Don't suggest in binding to use a deprecated property mfd: Add MFD_CROS_EC dependencies mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs mfd: axp20x: Add missing registers, and mark more registers volatile mfd: arizona: Fixup some formatting/white space errors mfd: wm8994: Fix NULL pointer exception on missing pdata of: Add vendor prefix for Nuvoton mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event mfd: atmel-hlcdc: Add support for new SoCs mfd: Export OF module alias information in missing drivers mfd: stw481x: Export I2C module alias information mfd: da9062: Support for the DA9063 OnKey in the DA9062 core mfd: max899x: Avoid redundant irq_data lookup ...
2015-09-04Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-49/+48
Pull dmaengine updates from Vinod Koul: "This time we have aded a new capability for scatter-gathered memset using dmaengine APIs. This is supported in xdmac & hdmac drivers We have added support for reusing descriptors for examples like video buffers etc. Driver will follow The behaviour of descriptor ack has been clarified and documented New devices added are: - dma controller in sun[457]i SoCs - lpc18xx dmamux - ZTE ZX296702 dma controller - Analog Devices AXI-DMAC DMA controller - eDMA support for dma-crossbar - imx6sx support in imx-sdma driver - imx-sdma device to device support Other: - jz4780 fixes - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is deprecated and fixes - ACPI support in X-Gene DMA engine driver - ipu irq fixes - mvxor fixes - minor fixes spread thru drivers" [ The Kconfig and Makefile entries got re-sorted alphabetically, and I handled the conflict with the new Intel integrated IDMA driver by slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in order to keep the Intel entries together. I think it might be a good idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make the sorting be a true sort, not this mismash. Also, this merge disables the COMPILE_TEST for the sun4i DMA controller, because it does not compile cleanly at all. - Linus ] * tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs dmaengine :ipu: change ipu_irq_handler() to remove compile warning dmaengine: ioatdma: Fix variable array length dmaengine: ioatdma: fix sparse "error" with prep lock dmaengine: hdmac: Add memset capabilities dmaengine: sort the sh Makefile dmaengine: sort the sh Kconfig dmaengine: sort the dw Kconfig dmaengine: sort the Kconfig dmaengine: sort the makefile drivers/dma: make mv_xor.c driver explicitly non-modular dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller devicetree: Add bindings documentation for Analog Devices AXI-DMAC dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests dmaengine: ioatdma: fix coccinelle warning dmaengine: ioatdma: fix zero day warning on incompatible pointer type dmaengine: tegra-apb: Simplify locking for device using global pause dmaengine: tegra-apb: Remove unnecessary return statements and variables dmaengine: tegra-apb: Avoid unnecessary channel base address calculation dmaengine: tegra-apb: Remove unused variables ...
2015-09-04Merge tag 'pinctrl-v4.3-1' of ↵Linus Torvalds1-0/+51
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.3 development cycle. Like with GPIO it's a lot of stuff. If my subsystems are any sign of the overall tempo of the kernel v4.3 will be a gigantic diff. [ It looks like 4.3 is calmer than 4.2 in most other subsystems, but we'll see - Linus ] Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers" * tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits) pinctrl: at91: fix null pointer dereference pinctrl: mediatek: Implement wake handler and suspend resume pinctrl: mediatek: Fix multiple registration issue. pinctrl: sh-pfc: r8a7794: add USB pin groups pinctrl: at91: Use generic irq_{request,release}_resources() pinctrl: cherryview: Use raw_spinlock for locking pinctrl: baytrail: Use raw_spinlock for locking pinctrl: imx6ul: Remove .owner field pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks pinctrl: sun4i: add spdif to pin description. pinctrl: atlas7: clear ugly branch statements for pull and drivestrength pinctrl: baytrail: Serialize all register access pinctrl: baytrail: Drop FSF mailing address pinctrl: rockchip: only enable gpio clock when it setting pinctrl/mediatek: fix spelling mistake in dev_err error message pinctrl: cherryview: Serialize all register access pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting pinctrl: nomadik: reflect current input value ...
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds6-0/+300
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-09-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds4-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some releases this branch is nearly empty, others we have more stuff. It tends to gather drivers that need SoC modification or dependencies such that they have to (also) go in through our tree. For this release, we have merged in part of the reset controller tree (with handshake that the parts we have merged in will remain stable), as well as dependencies on a few clock branches. In general, new items here are: - Qualcomm driver for SMM/SMD, which is how they communicate with the coprocessors on (some) of their platforms - memory controller work for ARM's PL172 memory controller - reset drivers for various platforms - PMU power domain support for Marvell platforms - Tegra support for T132/T210 SoCs: PMC, fuse, memory controller per-SoC support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits) ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze() ARM: tegra: Disable cpuidle if PSCI is available soc/tegra: pmc: Use existing pclk reference soc/tegra: pmc: Remove unnecessary return statement soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile memory: tegra: Add Tegra210 support memory: tegra: Add support for a variable-size client ID bitfield clk: shmobile: rz: Add CPG/MSTP Clock Domain support clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support clk: shmobile: Add CPG/MSTP Clock Domain support ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets reset: reset-zynq: Adding support for Xilinx Zynq reset controller. docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings. MIPS: ath79: Add the reset controller to the AR9132 dtsi reset: Add a driver for the reset controller on the AR71XX/AR9XXX devicetree: Add bindings for the ATH79 reset controller reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property doc: dt: add documentation for lpc1850-rgu reset driver ...
2015-09-01Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ...
2015-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+4
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.3: API: - the AEAD interface transition is now complete. - add top-level skcipher interface. Drivers: - x86-64 acceleration for chacha20/poly1305. - add sunxi-ss Allwinner Security System crypto accelerator. - add RSA algorithm to qat driver. - add SRIOV support to qat driver. - add LS1021A support to caam. - add i.MX6 support to caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (163 commits) crypto: algif_aead - fix for multiple operations on AF_ALG sockets crypto: qat - enable legacy VFs MPI: Fix mpi_read_buffer crypto: qat - silence a static checker warning crypto: vmx - Fixing opcode issue crypto: caam - Use the preferred style for memory allocations crypto: caam - Propagate the real error code in caam_probe crypto: caam - Fix the error handling in caam_probe crypto: caam - fix writing to JQCR_MS when using service interface crypto: hash - Add AHASH_REQUEST_ON_STACK crypto: testmgr - Use new skcipher interface crypto: skcipher - Add top-level skcipher interface crypto: cmac - allow usage in FIPS mode crypto: sahara - Use dmam_alloc_coherent crypto: caam - Add support for LS1021A crypto: qat - Don't move data inside output buffer crypto: vmx - Fixing GHASH Key issue on little endian crypto: vmx - Fixing AES-CTR counter bug crypto: null - Add missing Kconfig tristate for NULL2 crypto: nx - Add forward declaration for struct crypto_aead ...
2015-09-01Merge tag 'clk-for-linus-4.3' of ↵Linus Torvalds10-2/+673
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The clk framework changes for 4.3 are mostly updates to existing drivers and the addition of new clock drivers. Stephen Boyd has also done a lot of subsystem-wide driver clean-ups (thanks!). There are also fixes to the framework core and changes to better split clock provider drivers from clock consumer drivers" * tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: s5pv210: add missing call to samsung_clk_of_add_provider() clk: pistachio: correct critical clock list clk: pistachio: Fix PLL rate calculation in integer mode clk: pistachio: Fix override of clk-pll settings from boot loader clk: pistachio: Fix 32bit integer overflows clk: tegra: Fix some static checker problems clk: qcom: Fix MSM8916 prng clock enable bit clk: Add missing header for 'bool' definition to clk-conf.h drivers/clk: appropriate __init annotation for const data clk: rockchip: register pll mux before pll itself clk: add bindings for the Ux500 clocks clk/ARM: move Ux500 PRCC bases to the device tree clk: remove duplicated code with __clk_set_parent_after clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw) clk: Constify clk_hw argument to provider APIs clk: Hi6220: add stub clock driver dt-bindings: clk: Hi6220: Document stub clock driver dt-bindings: arm: Hi6220: add doc for SRAM controller clk: atlas7: fix pll missed divide NR in fraction mode clk: atlas7: fix bit field and its root clk for coresight_tpiu ...
2015-08-28leds: leds-ns2: move LED modes mapping outside of the driverVincent Donnefort1-0/+8
On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO values to LED mode) is different from the one used on other boards supported by the leds-ns2 driver. With this patch the hardcoded mapping is removed from leds-ns2. Now, it must be defined either in the platform data (if an old-fashion board setup file is used) or in the DT node. In order to allow the later, this patch also introduces a modes-map property for the leds-ns2 DT binding. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-26Merge tag 'tegra-for-4.3-clk' of ↵Stephen Boyd1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.3-rc1 This contains the DFLL driver needed to implement CPU frequency scaling on Tegra.
2015-08-24dt-bindings: add header for generic I2C flags in bindingsWolfram Sang1-0/+18
Tested-by: Andrey Danin <danindrey@mail.ru> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-23devicetree: Add bindings documentation for Analog Devices AXI-DMACLars-Peter Clausen1-0/+48
Add the devicetree descriptor for the Analog Devices AXI-DMAC DMA controller. This is a soft peripheral used in FPGAs and the bindings describe how it is connected to the system (clock, interrupt, memory map) as well as the configuration options that were used when the peripheral was instantiated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-21Merge tag 'tegra-for-4.3-dt' of ↵Olof Johansson1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Devicetree changes for v4.3-rc1 Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on Venice2 and Jetson TK1. This also enables support for the PMU hardware found on Tegra124, which among other things, can be used for performance measurements. * tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree pinctrl: tegra: Only set the gpio range if needed clk: tegra: Add the DFLL as a possible parent of the cclk_g clock clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend clk: tegra: Add Tegra124 DFLL clocksource platform driver clk: tegra: Add DFLL DVCO reset control for Tegra124 clk: tegra: Introduce ability for SoC-specific reset control callbacks clk: tegra: Add functions for parsing CVB tables clk: tegra: Add closed loop support for the DFLL clk: tegra: Add library for the DFLL clock source (open-loop mode) clk: tegra: Add binding for the Tegra124 DFLL clocksource Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-21Merge tag 'tegra-for-4.3-memory' of ↵Olof Johansson1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers ARM: tegra: Memory controller updates for v4.3-rc1 Adds support for Tegra210, which allows the SMMU to be used on this new SoC generation. * tag 'tegra-for-4.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Add Tegra210 support memory: tegra: Add support for a variable-size client ID bitfield memory: tegra: Expose supported rates via debugfs Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-18Merge tag 'imx-dt-4.3' of ↵Olof Johansson1-0/+240
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree updates for 4.3: - Add audio and eTSEC device support and update dspi node for LS1021A. - Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable a bunch of device support for i.MX6UL, including RTC, power key, USB, QSPI, and dual FEC. - Enable HDMI and LVDS dual display support for a few imx6qdl boards. - Support of imx6sl-warp board rev1.12, the version which will be publicly available for the customers. - A few i.MX7D device additions, watchdog, cortex-a7 coresight components, RTC, power key, power off. - Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc., update ADC node, and define stdout-path property. - A few random updates for i.MX27 and i.MX53 devices. * tag 'imx-dt-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits) ARM: dts: imx6ul: add snvs power key support ARM: dts: imx6ul: add RTC support ARM: dts: imx6ul: enable GPC as extended interrupt controller ARM: dts: imx6sx: correct property name for wakeup source ARM: dts: add property for maximum ADC clock frequencies ARM: dts: imx7d: enable snvs rtc, onoffkey and power off ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL ARM: dts: imx27: add support of internal rtc ARM: dts: vf-colibri: define stdout-path property ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR ARM: dts: ls1021a: Add the eTSEC controller nodes ARM: dts: imx6ul: add qspi support ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h ARM: dts: imx6ul: add usb host and function support ARM: dts: vfxxx: Add io-channel-cells property for ADC node ARM: dts: ls1021a: Add dts nodes for audio on LS1021A ARM: imx6qdl-sabreauto.dtsi: enable USB support ARM: dts: imx: update snvs to use syscon access register ARM: dts: imx: add imx6ul and imx6ul evk board support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-18dmaengine: jz4780: Remove request type number definitions headerAlex Smith1-49/+0
The header just includes definitions of hardware-specific numbers which can be written directly in the device tree, there's no need for a public header containing these definitions. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: dmaengine@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-13memory: tegra: Add Tegra210 supportThierry Reding1-0/+36
Add the table of memory clients and SWGROUPs for Tegra210 to enable SMMU support for this new SoC. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13Merge tag 'socfpga_dts_for_v4.3_part_2' of ↵Olof Johansson1-0/+110
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v4.3, take 2 - Add DTS property "altr,modrst-offset" for reset driver to use - Add updated reset defines for the reset driver - Add reset property for EMACs on Arria10 * tag 'socfpga_dts_for_v4.3_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: Add resets for EMACs on Arria10 ARM: socfpga: dts: add "altr,modrst-offset" property dt-bindings: Add reset manager offsets for Arria10 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-12Merge tag 'imx-clk-4.3' of ↵Michael Turquette1-0/+240
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next The i.MX clock updates for 4.3: - Provide a better IPU clock initial settings on imx6dl for getting HDMI and LVDS at the same time. - Add clock driver support for i.MX6UL SoC - Add a second clock for RTC device on i.MX31 and i.MX35
2015-08-11[media] c8sectpfe: Add DT bindings documentation for c8sectpfe driverPeter Griffin1-0/+12
This patch adds the DT bindings documentation for the c8sectpfe LinuxDVB demux driver whose IP is in the STiH407 family silicon SoC's. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11Merge tag 'omap-for-v4.3/dt-pt3' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Omap device tree changes for v4.3 merge window. Pretty much all just trivial additions to configure devices for various SoCs and boards: - Updates for omap3-devkit8000 board support - M3 coprosessor, regulator, mux, RTC and eMMC updates for am437x - MMC, regmap, mux and dwc3 updates for dra7 and omap5 * tag 'omap-for-v4.3/dt-pt3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support ARM: dts: omap3-devkit8000: add LCD panels ARM: dts: omap3-devkit8000: Add DSS' DVI support ARM: dts: omap3-devkit8000: Add S-video output support ARM: dts: omap3-devkit8000: Add keymap support ARM: dts: omap3-devkit8000: Add PMU stat support ARM: dts: omap3-devkit8000: Add user button support ARM: dts: am437x-gp-evm: Add regulator-always-on and regulator-boot-on for RTC DCDCs ARM: dts: AM4372: Reorder the rtc compatible string ARM: dts: am437x-gp-evm: Add eMMC support ARM: dts: am437x-gp-evm: Add gpio-hog for configuring eMMC/NAND driver ARM: dts: am43xx: Introduce MUX_MODE9 for pinctrl ARM: dts: dra72-evm: Fix spurious card insert/removal interrupt ARM: dts: dra7-evm: Fix spurious card insert/removal interrupt ARM: dts: am57xx-beagle-x15: mmc1: remove redundant pbias-supply property ARM: dts: dra7-evm: Add MMCSD card removal GPIO ARM: dts: dra72-evm: Set max clock frequency of MMC1 and MMC2 ARM: dts: dra7-evm: add evm_3v3_sd regulator ARM: dts: dra72-evm: add evm_3v3_sd regulator ARM: dts: AM4372: Add the wkup_m3_ipc node ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-10ARM: clk-imx6q: Add CAAM clock supportVictoria Milhoan1-1/+4
Add CAAM clock support to the i.MX6 clocking infrastructure. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10dt-bindings: Add reset manager offsets for Arria10Dinh Nguyen1-0/+110
The reset manager for is pretty similar to the one for SoCFPGA cyclone5/arria5 except for a few offsets. This patch adds those offsets. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-05ARM: dts: am43xx: Introduce MUX_MODE9 for pinctrlDave Gerlach1-0/+1
Some pins on AM43XX support MODE9 for the pinctrl settings so add a binding to describe this. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-03ARM: STi: DT: Move reset controller constants into common locationPhilipp Zabel3-0/+0
By popular vote, the DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the STi reset constants in there, too, to avoid confusion. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2015-07-28clk: zx: Add audio and GPIO clock for zx296702Jun Nie1-2/+15
Add SPDIF/I2S and GPIO clock for zx296702 Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28Merge branch 'v4.3-topic/clk-samsung' of ↵Michael Turquette2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into clk-next
2015-07-27Merge tag 'renesas-dt2-for-v4.3' of ↵Olof Johansson2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.3 * Add Audio MIX and CTU support to r8a779[01] SoCs * Correct IRQ sense for adv7511 on lager board * Add sound label to koelsch and lager boards * Add IIC support to emev2 SoC * tag 'renesas-dt2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: Add Audio MIX support on DTSI ARM: shmobile: r8a7791: Add Audio CTU support on DTSI ARM: shmobile: r8a7790: Add Audio MIX support on DTSI ARM: shmobile: r8a7790: Add Audio CTU support on DTSI ARM: shmobile: lager: Fix adv7511 IRQ sensing ARM: shmobile: koelsch: add sound label on DTS ARM: shmobile: lager: add sound label on DTS ARM: shmobile: emev2: kzm9d: enable IIC busses ARM: shmobile: emev2: add IIC cores to dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-24clk: exynos3250: Add cpu clock configuration data and instaniate cpu clockChanwoo Choi1-0/+1
This patch add CPU clock configuration data and instantiate the CPU clock type for Exynos3250 to support Samsung specific cpu-clock type. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-24clk: exynos5250: add cpu clock configuration data and instantiate cpu clockThomas Abraham1-0/+1
With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos5250. Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: split exynos5250 support from the original patch] [b.zolnierkie: moved E5250_CPU_DIV[0,1] macros to clk-exynos5250.c] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-23mfd: dt-bindings: Provide human readable define for Clocksource modeLee Jones1-0/+1
ST's Low Power Controller can now operate in three supported modes; Watchdog, Real Time Clock and most recently as a Clocksource. This new define will allow the LPC IP to be configured for Clocksource from DT. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-22ARM: shmobile: r8a7791: Add Audio CTU support on DTSIKuninori Morimoto1-0/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-22ARM: shmobile: r8a7790: Add Audio CTU support on DTSIKuninori Morimoto1-0/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-17pinctrl: qcom: ssbi: Family A gpio & mpp driversBjorn Andersson1-0/+51
This introduces pinctrl drivers for gpio and mpp blocks found in family A PMICs. Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16clk: tegra: Add DFLL DVCO reset control for Tegra124Paul Walmsley1-0/+12
The DVCO present in the DFLL IP block has a separate reset line, exposed via the CAR IP block. This reset line is asserted upon SoC reset. Unless something (such as the DFLL driver) deasserts this line, the DVCO will not oscillate, although reads and writes to the DFLL IP block will complete. Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and saving hours of debugging time. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> [ttynkkynen: ported to tegra124 from tegra114] Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> [mikko.perttunen: ported to special reset callback] Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-15Merge tag 'omap-for-v4.3/dt-pt1' of ↵Olof Johansson1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v4.3, part 1" from Tony Lindgren: Omap dts changes for v4.3 merge window. There are also related changes for reemoteproc platform_data and audio options for omap2plus_defconfig to keep audio working when changing boards to use SIMPLE_CARD. The summary of changes is: - A large set of audio related changes for SIMPLE_CARD from Peter Ujfalusi <peter.ujfalusi@ti.com> for am335x and am437x - Pinctrl dts defines for dra7 virtual mode to configure timings - Change to use cpsw slave0 for dra7 Ethernet - Remove unconfigured and wrong l3-mux entry for dm816x - Add support for Gumstix Palo35 and TobiDuo boards, and Overo PoP NAND and McBSP2 - Start using new HDMI binding for tilcdc - Start using new sDMA crossbar for dra7 - Start using rproc for am335x and am437x M3 coprocessor * tag 'omap-for-v4.3/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (32 commits) ARM: dts: am335x-evm: Switch using simple-audio-card for audio support ARM: dts: am335x-evm: Add sleep pin settings for mcasp1 ARM: dts: am335x-evm: Rename pinctrl section for McASP1 ARM: dts: am335x-evm: Fix mcasp1 node's indentation ARM: dts: am335x-evmsk: Switch using simple-audio-card for audio support ARM: dts: am335x-evmsk: Add sleep pin settings for mcasp1 ARM: dts: am335x-evmsk: Fix mcasp1 node's indentation ARM: dts: am437x-gp-evm: Enable analog audio via simple-card ARM: dts: am437x-gp-evm: McASP1 node for audio support ARM: dts: am437x-gp-evm: Add node for tlv320aic3106 audio codec ARM: dts: am437x-gp-evm: Rename fixed regulator vmmcsd_fixed to evm_v3_3d ARM: dts: am437x-gp-evm: Add gpio-hog for configuring the display/audio mux ARM: dts: am43xx-epos-evm: Enable analog audio via simple-card ARM: dts: am43xx-epos-evm: Add node for tlv320aic3111 audio codec ARM: dts: am43xx-epos-evm: McASP1 node for audio support ARM: dts: am43xx-epos-evm: Add regulator for VBAT and DCDC4 of tps65218 ARM: dts: am43xx-epos-evm: Add gpio-hog for configuring the display/audio mux ARM: dts: am437x-sk-evm: Switch using simple-audio-card for audio support ARM: dts: am437x-sk-evm: Add sleep pin settings for mcasp1 ARM: omap2plus_defconfig: Enable audio related config options ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-14pinctrl: dra: dt-bindings: Add virtual mode configuration optionNishanth Menon1-0/+20
In addition to the regular mux configuration such as mux mode 1, 2 etc, certain pins of DRA7 require to have "virtual mode" also programmed. This allows for predefined delay characteristics to be used by the SoC to meet timing characterstics needed for the interface. Provide easy to use macro to do the same. It is important to note that the official TI guidelines recommend to do as minimal pin reconfiguration beyond the bootloader given the design of the hardware involved which can result in substantial glitches which may impair functionality of certain peripherals. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-14clk: imx: add imx6ul clk tree supportFrank Li1-0/+240
Add imx6ul clock driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-07clk: rockchip: add missing include guardsHeiko Stuebner4-0/+20
Review for the rk3368 turned up that the clock header was missing include guards. This is also true for the already existing clock binding headers, so add them. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07clk: rockchip: add dt-binding header for rk3368Heiko Stuebner1-0/+384
Add the dt-bindings header for the rk3368, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06soc: Mediatek: Add SCPSYS power domain driverSascha Hauer1-0/+15
This adds a power domain driver for the Mediatek SCPSYS unit. The System Control Processor System (SCPSYS) has several power management related tasks in the system. The tasks include thermal measurement, dynamic voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control. The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power domain control. For now this driver only adds power domain support, the more advanced features are not yet supported. The driver implements the generic PM domain device tree bindings, the first user will most likely be the Mediatek AFE audio driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-06ARM: shmobile: r8a7790: add EtherAVB clocksSergei Shtylyov1-0/+1
Add the EtherAVB clock to the R8A7790 device tree. Based on original patch by Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-06ARM: shmobile: add r8a7793 minimal SoC device treeUlrich Hecht1-0/+164
Minimal r8a7793 device tree including one CPU core, interrupt controllers, timers, two serial ports, and the Ethernet controller, plus the required clock descriptions. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-02Merge tag 'clk-for-linus-4.2' of ↵Linus Torvalds13-0/+1002
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clock framework updates from Michael Turquette: "The changes to the common clock framework for 4.2 are dominated by new drivers and updates to existing ones, as usual. There are some fixes to the framework itself and several cleanups for sparse warnings, etc" * tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits) clk: stm32: Add clock driver for STM32F4[23]xxx devices dt-bindings: Document the STM32F4 clock bindings cpufreq: exynos: remove Exynos4210 specific cpufreq driver support ARM: Exynos: switch to using generic cpufreq driver for Exynos4210 clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock clk: samsung: add infrastructure to register cpu clocks clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support doc: dt: add documentation for lpc1850-ccu clk driver clk: add lpc18xx ccu clk driver doc: dt: add documentation for lpc1850-cgu clk driver clk: add lpc18xx cgu clk driver clk: keystone: add support for post divider register for main pll clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSED clk: cygnus: remove Cygnus dummy clock binding clk: cygnus: add clock support for Broadcom Cygnus clk: Change bcm clocks build dependency clk: iproc: add initial common clock support clk: iproc: define Broadcom iProc clock binding MAINTAINERS: update email for Michael Turquette clk: meson: add some error handling in meson_clk_register_cpu() ...
2015-06-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-0/+141
Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
2015-06-27Merge tag 'char-misc-4.2-rc1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
2015-06-26Merge tag 'armsoc-dt' of ↵Linus Torvalds7-0/+61
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Kevin Hilman: "As usual, quite a few device-tree updates in ARM land. There was one minor churn in DTs due to relicensing under a dual-license, and lots of little additions of new peripherals, features etc, but nothing really exciting to call to your attention. Some higlights, focsuing on support for new SoCs and boards: - AT91: new boards: Overkiz, Acme Systems' Arietta G25 - tegra: HDA support - bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS RT-AC87U - mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys boards, DLink DNS-327L - OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill SL50 - ARM: added support for Juno r1 board - sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G - imx: i.MX7D SoC support; new boards: Armadeus Systems APF6, Gateworks GW5510, and aristainetos2 boards - hisilicon: hi6220 SoC support; new boards: 96boards hikey" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (462 commits) ARM: hisi: revert changes from hisi/hip04-dt branch ARM: nomadik: set proper compatible for accelerometer ARM64: juno: add GPIO keys ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes ARM: dts: Introduce STM32F429 MCU ARM: socfpga: dts: enable ethernet for Arria10 devkit ARM: dts: k2l: fix the netcp range size ARM: dts: k2e: fix the netcp range size ARM: dts: k2hk: fix the netcp range size ARM: dts: k2l-evm: Add device bindings for netcp driver ARM: dts: k2e-evm: Add device bindings for netcp driver ARM: dts: k2hk-evm: Add device bindings for netcp driver ARM: BCM5301X: Add DT for Asus RT-AC87U ARM: BCM5301X: add IRQ numbers for PCIe controller ARM: BCM5301X: add NAND flash chip description arm64: dts: Add dts files for Hisilicon Hi6220 SoC clk: hi6220: Document devicetree bindings for hi6220 clock arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ...
2015-06-26Merge tag 'armsoc-soc' of ↵Linus Torvalds3-1/+622
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 19:38:08 +0300