summaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)AuthorFilesLines
2018-04-06Merge branches 'clk-spreadtrum', 'clk-stm32f', 'clk-stm32mp1', 'clk-hi655x' ↵Stephen Boyd3-4/+278
and 'clk-gpio' into clk-next * clk-spreadtrum: clk: sprd: add RTC gate for SC9860 dt-bindings: clocks: add APB RTC gate for SC9860 * clk-stm32f: clk: stm32: Add clk entry for SDMMC2 on stm32F769 clk: stm32: Add DSI clock for STM32F469 Board clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK * clk-stm32mp1: clk: stm32: add configuration flags for each of the stm32 drivers clk: stm32mp1: add Debug clocks clk: stm32mp1: add MCO clocks clk: stm32mp1: add RTC clock clk: stm32mp1: add Peripheral & Kernel Clocks clk: stm32mp1: add Kernel timers clk: stm32mp1: add Sub System clocks clk: stm32mp1: add Post-dividers for PLL clk: stm32mp1: add PLL clocks clk: stm32mp1: add Source Clocks for PLLs clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators clk: stm32mp1: Introduce STM32MP1 clock driver dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings * clk-hi655x: clk: enable hi655x common clk automatically * clk-gpio: clk: clk-gpio: Allow GPIO to sleep in set/get_parent
2018-04-06Merge branches 'clk-ti', 'clk-amlogic', 'clk-tegra' and 'clk-samsung' into ↵Stephen Boyd2-1/+2
clk-next * clk-ti: clk: keystone: sci-clk: add support for dynamically probing clocks clk: ti: add support for clock latching to mux clocks clk: ti: add support for clock latching to divider clocks clk: ti: add generic support for clock latching clk: ti: add support for register read-modify-write low-level operation dt-bindings: clock: ti: add latching support to mux and divider clocks * clk-amlogic: (50 commits) clk: meson: Drop unused local variable and add static clk: meson: clean-up clk81 clocks clk: meson: add fdiv clock gates clk: meson: add mpll pre-divider clk: meson: axg: add hifi pll clock clk: meson: axg: add hifi clock bindings clk: meson: add ROUND_CLOSEST to the pll driver clk: meson: add gp0 frac parameter for axg and gxl clk: meson: improve pll driver results with frac clk: meson: remove special gp0 lock loop clk: meson: poke pll CNTL last clk: meson: add fractional part of meson8b fixed_pll clk: meson: use hhi syscon if available clk: meson: remove obsolete cpu_clk clk: meson: rework meson8b cpu clock clk: meson: split divider and gate part of mpll clk: meson: migrate plls clocks to clk_regmap clk: meson: migrate the audio divider clock to clk_regmap clk: meson: migrate mplls clocks to clk_regmap clk: meson: add regmap helpers for parm ... * clk-tegra: clk: tegra: Fix pll_u rate configuration clk: tegra: Specify VDE clock rate clk: tegra20: Correct PLL_C_OUT1 setup clk: tegra: Mark HCLK, SCLK and EMC as critical clk: tegra: MBIST work around for Tegra210 clk: tegra: add fence_delay for clock registers clk: tegra: Add la clock for Tegra210 * clk-samsung: (22 commits) clk: samsung: Mark a few things static clk: samsung: Add fout=196608001 Hz EPLL rate entry for exynos4412 clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices clk: samsung: exynos5420: Add more entries to EPLL rate table clk: samsung: exynos5420: Add CLK_SET_RATE_PARENT flag to mout_mau_epll_clk clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMU clk: samsung: exynos5420: Move PD-dependent clocks to Exynos5 sub-CMU clk: samsung: Add Exynos5 sub-CMU clock driver soc: samsung: pm_domains: Add blacklisting clock handling clk: samsung: Add compile time PLL rate validators clk: samsung: s3c2410: Fix PLL rates clk: samsung: exynos7: Fix PLL rates clk: samsung: exynos5433: Fix PLL rates clk: samsung: exynos5260: Fix PLL rates clk: samsung: exynos5250: Fix PLL rates clk: samsung: exynos3250: Fix PLL rates clk: exynos5433: Extend list of available AUD_PLL output frequencies clk: exynos5433: Add CLK_IGNORE_UNUSED flag to sclk_ioclk_i2s1_bclk clk: samsung: Add a git tree entry to MAINTAINERS clk: samsung: Remove redundant dev_err call in exynos_audss_clk_probe() ...
2018-04-06dt-bindings: imx: update clock doc for imx6sllBai Ping1-0/+202
Add clock binding doc update for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06dt-bindings: documentation: add clock bindings information for Stratix10Dinh Nguyen1-0/+84
Document that Stratix10 clock bindings, and add the clock header file. The clock header is an enumeration of all the different clocks on the Stratix10 platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-27Merge tag 'tegra-for-4.17-arm64-dt' of ↵Arnd Bergmann1-0/+321
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "arm64: tegra: Device tree changes for v4.17-rc1" from Thierry Reding: Adds initial support for the P2972-0000 development board based on Tegra194 and enables the AHCI controller on Jetson TX1. * tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable AHCI on Jetson TX1 arm64: tegra: Add SATA node for Tegra210 arm64: tegra: Add device tree for the Tegra194 P2972-0000 board arm64: tegra: Add Tegra194 chip device tree
2018-03-23dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX ClockTali Perry1-0/+44
* Nuvoton NPCM7XX Clock Controller Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which generates and supplies clocks to all modules within the BMC. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-21clk: sunxi-ng: add missing hdmi-slow clock for H6 CCUIcenowy Zheng1-13/+14
The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing in the ccu-sun50i-h6 driver. Add this missing clock to the driver. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-20dt-bindings: clock: Add Actions S900 clock bindingsManivannan Sadhasivam1-0/+129
Add Actions Semi S900 clock bindings. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: qcom: rpmcc: Add support to XO buffered clocksSrinivas Kandagatla1-0/+5
XO is onchip buffer clock to generate 19.2MHz. This patch adds support to 5 XO buffer clocks found on PMIC8921, these buffer clocks can be controlled from external pin or in manual mode. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20dt-bindings: clock: add clocks for MT2712Weiyi Lu1-2/+10
add new clocks according to ECO design change Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: stm32: Add DSI clock for STM32F469 BoardGabriel Fernandez1-1/+2
This patch adds DSI clock for STM32F469 board Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLKGabriel Fernandez1-3/+3
Update of END_PRIMARY_CLK was missed, it should be after CLK_SYSCLK hsi and sysclk are overwritten by gpioa and gpiob. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: update missing clock data for MT7622 audsysRyder Lee1-1/+2
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4Sean Wang1-1/+2
Just add binding for a fixed-factor clock axisel_d4, which would be referenced by PWM devices on MT7623 or MT2701 SoC. Cc: stable@vger.kernel.org Fixes: 1de9b21633d6 ("clk: mediatek: Add dt-bindings for MT2701 clocks") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-18clk: sunxi-ng: add support for the Allwinner H6 CCUIcenowy Zheng1-0/+124
The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-17dt-bindings: clocks: add APB RTC gate for SC9860Chunyan Zhang1-1/+20
Added index of RTC gate clocks which are used by some devices on aon area of SC9860, for example the Watchdog timer. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-13clk: meson: axg: add hifi clock bindingsJerome Brunet1-0/+1
Add the new HIFI pll to axg clock bindings Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-12clk: stm32mp1: Introduce STM32MP1 clock driverGabriel Fernandez1-0/+254
This patch introduces the mechanism to probe stm32mp1 driver. It also defines registers definition. This patch also introduces the generic mechanism to register a clock (a simple gate, divider and fixed factor). All clocks will be defined in one table. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-03-08clk: tegra: Add la clock for Tegra210Peter De Schrijver1-1/+1
This clock is needed by the memory built-in self test work around. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08arm64: tegra: Add Tegra194 chip device treeMikko Perttunen1-0/+321
Add the chip-level device tree, including binding headers, for the NVIDIA Tegra194 "Xavier" system-on-chip. Only a small subset of devices are initially available, enough to boot to UART console. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-02clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEOJernej Skrabec1-0/+2
CLK_PLL_VIDEO needs to be referenced in HDMI DT entry as a possible PHY clock parent. Export it so it can be used later in DT. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-02-28clk: imx: imx7d: add the Keypad Port module clockStefan Agner1-1/+2
According to the i.MX7D Reference Manual, the Keypad Port module (KPP) requires this clock gate to be enabled. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28clk: imx7d: add CAAM clockRui Miguel Silva1-1/+2
Add CAAM clock so that we could use the Cryptographic Acceleration and Assurance Module (CAAM) hardware block. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: "Horia Geantă" <horia.geanta@nxp.com> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-27clk: hi3798cv200: add COMBPHY0 clock supportJianguo Sun1-0/+1
The clock COMBPHY1 has already been supported by hi3798cv200 driver, but COMBPHY0 is missing. It adds COMBPHY0 clock support. Since the mux table is being shared by COMBPHY0 and COMBPHY1, it renames comphy1_mux_p and comphy1_mux_table a bit to drop instance number '1' from there. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27clk: hi3798cv200: fix define indentationShawn Guo1-27/+27
It's a coding-style fix, which corrects the indentation for all those clock definitions, so that the code looks nicer and new definitions can be added with a recommended indentation. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-26clk: renesas: cpg-mssr: Add support for R-Car M3-NJacopo Mondi1-0/+62
Initial support for R-Car M3-N (r8a77965), including core and module clocks. Based on Table 8.2d of "R-Car Series, 3rd Generation User's Manual: Hardware (Rev. 0.80, Oct 31, 2017)". Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-22clk: imx: imx7d: add the snvs clockAnson Huang1-1/+2
According to the i.MX7D Reference Manual, SNVS block has a clock gate, accessing SNVS block would need this clock gate to be enabled, add it into clock tree so that SNVS module driver can operate this clock gate. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-20dt-bindings: clock: add R8A77980 CPG core clock definitionsSergei Shtylyov1-0/+51
Add macros usable by the device tree sources to reference the R8A77980 CPG core clocks by index. The data come from the table 8.2e of the R-Car Series, 3rd Generation User's Manual: Hardware (Rev. 0.80, Oct, 2017), however I had to add the Z2 clock which is somehow present only on the figure 8.1e... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12clk: rockchip: remove HCLK_VIO from rk3328 dt headerHeiko Stuebner1-1/+0
This clock is not hclk_vio but hclk_vio_niu, the clock for the interconnect output. The clock got fixed and the id was never used in this incorrect form, so remove it. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-02-07Merge tag 'mips_4.16' of ↵Linus Torvalds1-0/+58
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.16. Rough overview: (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source handheld video game console (2) Support for the Ranchu board (used by Android emulator) (3) Various cleanups and misc improvements More detailed summary: Fixes: - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9) - Fix vmlinuz default build when ZBOOT selected - Fix clean up of vmlinuz targets - Fix command line duplication (in preparation for Ingenic JZ4770) Miscellaneous: - Allow Processor ID reads to be to be optimised away by the compiler (improves performance when running in guest) - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to disable on generic platform with Ranchu board support - Add helpers for assembler macro instructions for older assemblers - Use assembler macro instructions to support VZ, XPA & MSA operations on older assemblers, removing C wrapper duplication - Various improvements to VZ & XPA assembly wrappers - Add drivers/platform/mips/ to MIPS MAINTAINERS entry Minor cleanups: - Misc FPU emulation cleanups (removal of unnecessary include, moving macros to common header, checkpatch and sparse fixes) - Remove duplicate assignment of core in play_dead() - Remove duplication in watchpoint handling - Remove mips_dma_mapping_error() stub - Use NULL instead of 0 in prepare_ftrace_return() - Use proper kernel-doc Return keyword for __compute_return_epc_for_insn() - Remove duplicate semicolon in csum_fold() Platform support: Broadcom: - Enable ZBOOT on BCM47xx Generic platform: - Add Ranchu board support, used by Android emulator - Fix machine compatible string matching for Ranchu - Support GIC in EIC mode Ingenic platforms: - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780) - Add Ingenic JZ4770 CGU clocks - General Ingenic clk changes to prepare for JZ4770 SoC support - Use common command line handling code - Add DT vendor prefix to GCW (Game Consoles Worldwide) Loongson: - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms - Drop 32-bit support for Loongson 2E/2F devices - Fix build failures due to multiple use of 'MEM_RESERVED'" * tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits) MIPS: Malta: Sanitize mouse and keyboard configuration. MIPS: Update defconfigs after previous patch. MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead MIPS: Generic: Support GIC in EIC mode MIPS: generic: Fix Makefile alignment MIPS: generic: Fix ranchu_of_match[] termination MIPS: generic: Fix machine compatible matching MIPS: Loongson fix name confict - MEM_RESERVED MIPS: bcm47xx: enable ZBOOT support MIPS: Fix trailing semicolon MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers. MIPS: MSA: Update helpers to use new asm macros MIPS: XPA: Standardise readx/writex accessors MIPS: XPA: Allow use of $0 (zero) to MTHC0 MIPS: XPA: Use XPA instructions in assembly MIPS: VZ: Pass GC0 register names in $n format MIPS: VZ: Update helpers to use new asm macros ...
2018-01-27Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and ↵Stephen Boyd1-0/+52
'clk-allwinner' into clk-next * clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO()
2018-01-27Merge branches 'clk-remove-asm-clkdev', 'clk-debugfs-fixes', 'clk-renesas' ↵Stephen Boyd1-0/+71
and 'clk-meson' into clk-next * clk-remove-asm-clkdev: clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks arch: Remove clkdev.h asm-generic from Kbuild clk: Prepare to remove asm-generic/clkdev.h blackfin: Use generic clkdev.h header * clk-debugfs-fixes: clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: Improve flags doc for of_clk_detect_critical() * clk-renesas: clk: renesas: r8a7796: Add FDP clock clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend clk: renesas: mstp: Keep wakeup sources active during system suspend clk: renesas: r8a77970: Add LVDS clock * clk-meson: clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: meson-axg: make local symbol axg_gp0_params_table static clk: meson-axg: fix return value check in axg_clkc_probe() clk: meson: mpll: use 64-bit maths in params_from_rate clk: meson-axg: add clock controller drivers clk: meson-axg: add clocks dt-bindings required header dt-bindings: clock: add compatible variant for the Meson-AXG clk: meson: make the spinlock naming more specific clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks clk: meson: gxbb: fix wrong clock for SARADC/SANA
2018-01-27Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' ↵Stephen Boyd2-0/+626
and 'clk-qcom-ipq8074' into clk-next * clk-spreadtrum: clk: sprd: add clocks support for SC9860 clk: sprd: Add dt-bindings include file for SC9860 dt-bindings: Add Spreadtrum clock binding documentation clk: sprd: add adjustable pll support clk: sprd: add composite clock support clk: sprd: add divider clock support clk: sprd: add mux clock support clk: sprd: add gate clock support clk: sprd: Add common infrastructure clk: move clock common macros out from vendor directories * clk-mvebu-dvfs: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS clk: mvebu: armada-37xx-periph: cosmetic changes * clk-qoriq: clk: qoriq: add more divider clocks support * clk-imx: clk: imx51: uart4, uart5 gates only exist on imx50, imx53 * clk-qcom-ipq8074: clk: qcom: ipq8074: add misc resets for PCIE and NSS dt-bindings: clock: qcom: add misc resets for PCIE and NSS clk: qcom: ipq8074: add GP and Crypto clocks clk: qcom: ipq8074: add NSS ethernet port clocks clk: qcom: ipq8074: add NSS clocks clk: qcom: ipq8074: add PCIE, USB and SDCC clocks clk: qcom: ipq8074: add remaining PLL’s dt-bindings: clock: qcom: add remaining clocks for IPQ8074 clk: qcom: ipq8074: fix missing GPLL0 divider width clk: qcom: add parent map for regmap mux clk: qcom: add read-only divider operations
2018-01-19dt-bindings: clock: Add jz4770-cgu.h headerPaul Cercueil1-0/+58
This will be used from the devicetree bindings to specify the clocks that should be obtained from the jz4770-cgu driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18481/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-12-22dt-bindings: clock: qcom: add misc resets for PCIE and NSSAbhishek Sahu1-0/+42
PCIE and NSS has MISC reset register in which single register has multiple reset bit. The patch adds the DT bindings for these MISC resets. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-22dt-bindings: clock: qcom: add remaining clocks for IPQ8074Abhishek Sahu1-0/+180
This patch adds the DT bindings for following IPQ8074 clocks - General PLL’s, NSS UBI PLL and NSS Crypto PLL. - 2 instances of PCIE, USB, SDCC. - 2 NSS UBI core and common NSS clocks. NSS is network switching system which accelerates the ethernet traffic. IPQ8074 NSS has two UBI cores. Some clocks are separate for each UBI core and remaining NSS clocks are common. - NSS ethernet port clocks. IPQ8074 has 6 ethernet ports and each port uses different TX and RX clocks. - Crypto engine clocks. - General purpose clocks which comes over GPIO. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-22clk: sprd: Add dt-bindings include file for SC9860Chunyan Zhang1-0/+404
This file defines all SC9860 clock indexes, it should be included in the device tree in which there's device using the clocks. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21dt-bindings: clock: Add ASPEED constantsJoel Stanley1-0/+52
These will be used by the clock driver and device trees. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-12-14clk: meson-axg: add clocks dt-bindings required headerQiufang Dai1-0/+71
Add the required header for the clocks ID dt-bindings exported from various subsystem in the Meson-AXG SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-07Merge branch '4.15-rc1-clkctrl-driver' of ↵Stephen Boyd6-0/+609
https://github.com/t-kristo/linux-pm into clk-next * '4.15-rc1-clkctrl-driver' of https://github.com/t-kristo/linux-pm: (28 commits) clk: ti: omap4: clkctrl data fixes for opt-clocks clk: ti: dm816: add clkctrl clock data dt-bindings: clk: add dm816 clkctrl definitions clk: ti: dm814: add clkctrl clock data dt-bindings: clk: add dm814 clkctrl definitions clk: ti: am43xx: add clkctrl clock data dt-bindings: clk: add am43xx clkctrl definitions clk: ti: am33xx: add clkctrl clock data dt-bindings: clk: add am33xx clkctrl definitions clk: ti: dra7: add clkctrl clock data dt-bindings: clk: add dra7 clkctrl definitions clk: ti: omap5: add clkctrl clock data dt-bindings: clk: add omap5 clkctrl definitions clk: ti: omap3: cleanup unnecessary clock aliases clk: ti: am43xx: cleanup unnecessary clock aliases clk: ti: am33xx: cleanup unnecessary clock aliases clk: ti: dm816x: cleanup unnecessary clock aliases clk: ti: dm814x: cleanup unnecessary clock aliases clk: ti: omap5: cleanup unnecessary clock aliases clk: ti: dra7: drop unnecessary clock aliases ...
2017-12-07dt-bindings: clk: Hi3660: Document stub clockLeo Yan1-0/+7
Document the DT binding for stub clock which is used for CPU, GPU and DDR frequency scaling. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-01dt-bindings: clk: add dm816 clkctrl definitionsTero Kristo1-0/+53
Contains offsets for all dm816 clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-12-01dt-bindings: clk: add dm814 clkctrl definitionsTero Kristo1-0/+45
Contains offsets for all dm814 clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-12-01dt-bindings: clk: add am43xx clkctrl definitionsTero Kristo1-0/+113
Contains offsets for all am43xx clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-12-01dt-bindings: clk: add am33xx clkctrl definitionsTero Kristo1-0/+108
Contains offsets for all am33xx clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-12-01dt-bindings: clk: add dra7 clkctrl definitionsTero Kristo1-0/+172
Contains offsets for all dra7 clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-12-01dt-bindings: clk: add omap5 clkctrl definitionsTero Kristo1-0/+118
Contains offsets for all omap5 clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-11-18Merge tag 'clk-for-linus' of ↵Linus Torvalds10-4/+839
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-17Merge tag 'armsoc-dt' of ↵Linus Torvalds4-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
2017-11-14Merge branch 'clk-mediatek' into clk-nextStephen Boyd2-0/+716
* clk-mediatek: clk: mediatek: add clock support for MT7622 SoC clk: mediatek: add clocks dt-bindings required header for MT7622 SoC clk: mediatek: add the option for determining PLL source clock dt-bindings: clock: mediatek: document clk bindings for MediaTek MT7622 SoC clk: mediatek: mark mtk_infrasys_init_early __init clk: mediatek: Add MT2712 clock support clk: mediatek: Add dt-bindings for MT2712 clocks dt-bindings: ARM: Mediatek: Document bindings for MT2712
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 21:18:02 +0300