summaryrefslogtreecommitdiff
path: root/include/asm-ppc/mpc8xx.h
AgeCommit message (Collapse)AuthorFilesLines
2006-08-20[PATCH] ppc32: board-specific part of fs_enet updateVitaly Bordug1-0/+1
This contains board-specific portion to respect driver changes (for 8272ads , 885ads and 866ads). Altered platform_data structures as well as initial setup routines relevant to fs_enet. Changes to the mpc8560ads ppc/ code are also introduced, but mainly as reference, since the entire board support is going to appear in arch/powerpc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-02-10[PATCH] ppc32: Make platform devices being able to assign functionsVitaly Bordug1-0/+1
Implemented by modification of the .name field of the platform device, when PDs with the same names are to be used within different drivers, as <device_name> -> <device_name>:<function> Corresponding drivers should change the .name in struct device_driver to reflect upper of course. Added ppc_sys_device_disable/enable function set, making it easier to disable all the inexistent/not utilized platform device way pdevs. By the check of the "disabled" bit in the config field of ppc_sys_specs, disabled platform devices will be either added/removed from the bus, or simply not registered on it, depending on the time when disable/enable call asserted. The default behaviour when nothing is disabled/enabled will be "all devices are enabled", which is the same as before. Also helper platform_notify_map function added, making assignment of board-specific platform_info more consistent and generic. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20[PATCH] powerpc: generalize PPC44x_PIN_SIZEMarcelo Tosatti1-0/+2
The following patch generalizes PPC44x_PIN_SIZE by changing it to PPC_PIN_SIZE, which can be defined by any sub-arch to automatically adjust VMALLOC_START. Define PPC_PIN_SIZE on 8xx, avoiding potential conflicts with the pinned space. Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29[PATCH] ppc32: ppc_sys fixes for 8xx and 82xxVitaly Bordug1-0/+4
This patch fixes a numbers of issues regarding to that both 8xx and 82xx began to use ppc_sys model: - Platform is now identified by default deviceless SOC, if no BOARD_CHIP_NAME is specified in the bard-specific header. For the list of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and mpc82xx_sys.c for 8xx and 82xx respectively. - Fixed a bug in identification by name - if the name was not found, it returned -1 instead of default deviceless ppc_spec. - fixed devices amount in the 8xx platform system descriptions Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-17[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devicesVitaly Bordug1-0/+16
Added ppc_sys device and system definitions for PowerQUICC I devices. This will allow drivers for PQI to be proper platform device drivers. Currently sys section contains only MPC885 and MPC866. Identification should be done with identify_ppc_sys_by_name call, with board-specific "name" string passed, since PQI do not have any register that could identify the SOC. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Remove board support for SPD823TSKumar Gala1-4/+0
Support for the SPD823TS board is no longer maintained and thus being removed Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06[PATCH] ppc32: add Freescale MPC885ADS board supportAndrei Konovalov1-0/+4
This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com> Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+103
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!