| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
endianness annotations in networking code had been in place for quite a
while; in particular, sin_port and s_addr are annotated as big-endian.
Code in ocfs2 had __force casts added apparently to shut the sparse
warnings up; of course, these days they only serve to *produce* warnings
for no reason whatsoever...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
BFS_FILEBLOCKS() expects struct bfs_inode * (on-disk data, with little-
endian fields), not struct bfs_inode_info * (in-core stuff, with host-
endian ones).
It's a macro and fields with the right names are present in
bfs_inode_info, so it compiles, but on big-endian host it gives bogus
results.
Introduced in commit f433dc56344cb72cc3de5ba0819021cec3aef807 ("Fixes to
the BFS filesystem driver").
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
access_flags_to_mode() gets on-the-wire data (little-endian) and treats
it as host-endian.
Introduced in commit e01b64001359034d04c695388870936ed3d1b56b ("[CIFS]
enable get mode from ACL when cifsacl mount option specified")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Creating PDEs with refcount 0 and "deleted" flag has problems (see below).
Switch to usual scheme:
* PDE is created with refcount 1
* every de_get does +1
* every de_put() and remove_proc_entry() do -1
* once refcount reaches 0, PDE is freed.
This elegantly fixes at least two following races (both observed) without
introducing new locks, without abusing old locks, without spreading
lock_kernel():
1) PDE leak
remove_proc_entry de_put
----------------- ------
[refcnt = 1]
if (atomic_read(&de->count) == 0)
if (atomic_dec_and_test(&de->count))
if (de->deleted)
/* also not taken! */
free_proc_entry(de);
else
de->deleted = 1;
[refcount=0, deleted=1]
2) use after free
remove_proc_entry de_put
----------------- ------
[refcnt = 1]
if (atomic_dec_and_test(&de->count))
if (atomic_read(&de->count) == 0)
free_proc_entry(de);
/* boom! */
if (de->deleted)
free_proc_entry(de);
BUG: unable to handle kernel paging request at virtual address 6b6b6b6b
printing eip: c10acdda *pdpt = 00000000338f8001 *pde = 0000000000000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: af_packet ipv6 cpufreq_ondemand loop serio_raw psmouse k8temp hwmon sr_mod cdrom
Pid: 23161, comm: cat Not tainted (2.6.24-rc2-8c0863403f109a43d7000b4646da4818220d501f #4)
EIP: 0060:[<c10acdda>] EFLAGS: 00210097 CPU: 1
EIP is at strnlen+0x6/0x18
EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: 6b6b6b6b EDX: fffffffe
ESI: c128fa3b EDI: f380bf34 EBP: ffffffff ESP: f380be44
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 23161, ti=f380b000 task=f38f2570 task.ti=f380b000)
Stack: c10ac4f0 00000278 c12ce000 f43cd2a8 00000163 00000000 7da86067 00000400
c128fa20 00896b18 f38325a8 c128fe20 ffffffff 00000000 c11f291e 00000400
f75be300 c128fa20 f769c9a0 c10ac779 f380bf34 f7bfee70 c1018e6b f380bf34
Call Trace:
[<c10ac4f0>] vsnprintf+0x2ad/0x49b
[<c10ac779>] vscnprintf+0x14/0x1f
[<c1018e6b>] vprintk+0xc5/0x2f9
[<c10379f1>] handle_fasteoi_irq+0x0/0xab
[<c1004f44>] do_IRQ+0x9f/0xb7
[<c117db3b>] preempt_schedule_irq+0x3f/0x5b
[<c100264e>] need_resched+0x1f/0x21
[<c10190ba>] printk+0x1b/0x1f
[<c107c8ad>] de_put+0x3d/0x50
[<c107c8f8>] proc_delete_inode+0x38/0x41
[<c107c8c0>] proc_delete_inode+0x0/0x41
[<c1066298>] generic_delete_inode+0x5e/0xc6
[<c1065aa9>] iput+0x60/0x62
[<c1063c8e>] d_kill+0x2d/0x46
[<c1063fa9>] dput+0xdc/0xe4
[<c10571a1>] __fput+0xb0/0xcd
[<c1054e49>] filp_close+0x48/0x4f
[<c1055ee9>] sys_close+0x67/0xa5
[<c10026b6>] sysenter_past_esp+0x5f/0x85
=======================
Code: c9 74 0c f2 ae 74 05 bf 01 00 00 00 4f 89 fa 5f 89 d0 c3 85 c9 57 89 c7 89 d0 74 05 f2 ae 75 01 4f 89 f8 5f c3 89 c1 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 c3 90 90 90 57 83 c9
EIP: [<c10acdda>] strnlen+0x6/0x18 SS:ESP 0068:f380be44
Also, remove broken usage of ->deleted from reiserfs: if sget() succeeds,
module is already pinned and remove_proc_entry() can't happen => nobody
can mark PDE deleted.
Dummy proc root in netns code is not marked with refcount 1. AFAICS, we
never get it, it's just for proper /proc/net removal. I double checked
CLONE_NETNS continues to work.
Patch survives many hours of modprobe/rmmod/cat loops without new bugs
which can be attributed to refcounting.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Before we start committing a transaction, we call
__journal_clean_checkpoint_list() to cleanup transaction's written-back
buffers.
If this call happens to remove all of them (and there were already some
buffers), __journal_remove_checkpoint() will decide to free the transaction
because it isn't (yet) a committing transaction and soon we fail some
assertion - the transaction really isn't ready to be freed :).
We change the check in __journal_remove_checkpoint() to free only a
transaction in T_FINISHED state. The locking there is subtle though (as
everywhere in JBD ;(). We use j_list_lock to protect the check and a
subsequent call to __journal_drop_transaction() and do the same in the end
of journal_commit_transaction() which is the only place where a transaction
can get to T_FINISHED state.
Probably I'm too paranoid here and such locking is not really necessary -
checkpoint lists are processed only from log_do_checkpoint() where a
transaction must be already committed to be processed or from
__journal_clean_checkpoint_list() where kjournald itself calls it and thus
transaction cannot change state either. Better be safe if something
changes in future...
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes regression, introduced since 2.6.16. NextStep variant of
UFS as OpenStep uses directory block size equals to 1024. Without this
change, ufs_check_page fails in many cases.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Dave Bailey <dsbailey@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On 2.6.24, top started showing 100% iowait on one CPU when a UML instance was
running (but completely idle). The UML code sits in io_getevents waiting for
an event to be submitted and completed.
Fix this by checking ctx->reqs_active before scheduling to determine whether
or not we are waiting for I/O.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix breakage caused by commit d5d8c5976d6adeddb8208c240460411e2198b393
"freezer: do not send signals to kernel threads" in
jffs2_garbage_collect_thread() that assumed it would be sent signals
by the freezer.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Pete MacKay <armlinux@architechnical.net>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (27 commits)
[INET]: Fix inet_diag dead-lock regression
[NETNS]: Fix /proc/net breakage
[TEXTSEARCH]: Do not allow zero length patterns in the textsearch infrastructure
[NETFILTER]: fix forgotten module release in xt_CONNMARK and xt_CONNSECMARK
[NETFILTER]: xt_TCPMSS: remove network triggerable WARN_ON
[DECNET]: dn_nl_deladdr() almost always returns no error
[IPV6]: Restore IPv6 when MTU is big enough
[RXRPC]: Add missing select on CRYPTO
mac80211: rate limit wep decrypt failed messages
rfkill: fix double-mutex-locking
mac80211: drop unencrypted frames if encryption is expected
mac80211: Fix behavior of ieee80211_open and ieee80211_close
ieee80211: fix unaligned access in ieee80211_copy_snap
mac80211: free ifsta->extra_ie and clear IEEE80211_STA_PRIVACY_INVOKED
SCTP: Fix build issues with SCTP AUTH.
SCTP: Fix chunk acceptance when no authenticated chunks were listed.
SCTP: Fix the supported extensions paramter
SCTP: Fix SCTP-AUTH to correctly add HMACS paramter.
SCTP: Fix the number of HB transmissions.
[TCP] illinois: Incorrect beta usage
...
|
|
Well I clearly goofed when I added the initial network namespace support
for /proc/net. Currently things work but there are odd details visible to
user space, even when we have a single network namespace.
Since we do not cache proc_dir_entry dentries at the moment we can just
modify ->lookup to return a different directory inode depending on the
network namespace of the process looking at /proc/net, replacing the
current technique of using a magic and fragile follow_link method.
To accomplish that this patch:
- introduces a shadow_proc method to allow different dentries to
be returned from proc_lookup.
- Removes the old /proc/net follow_link magic
- Fixes a weakness in our not caching of proc generic dentries.
As shadow_proc uses a task struct to decided which dentry to return we can
go back later and fix the proc generic caching without modifying any code
that uses the shadow_proc method.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make them depend on TCGETS2. If that one is implemented the rest should be
there as well.
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Invalidate attributes on rename, since some filesystems may update
st_ctime. Reported by Szabolcs Szakacsits
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I found problems accessing (executing) previously existing files, until
I did chmod on them (or setattr).
If the fi->attr_version is not initialized, then it could be
larger than fc->attr_version until a setattr is executed, and as a
result the inode attributes would never be set.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
FUSE_FILE_OPS is meant to signal that the kernel will send the open file to to
the userspace filesystem for operations on open files, so that sillyrenaming
unlinked files becomes unnecessary.
However this needs VFS changes, which won't make it into 2.6.24.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some open flags (O_APPEND, O_DIRECT) can be changed with fcntl(F_SETFL, ...)
after open, but fuse currently only sends the flags to userspace in open.
To make it possible to correcly handle changing flags, send the
current value to userspace in each read and write.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extract repeated code into helper function, as suggested by Akpm.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently reading a fuse file will stop at cached i_size and return
EOF, even though the file might have grown since the attributes were
last updated.
So detect if trying to read past EOF, and refresh the attributes
before continuing with the read.
Thanks to mpb for the report.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit a686cd898bd999fd026a51e90fb0a3410d258ddb:
"Val's cross-port of the ext3 reservations code into ext2."
include/linux/ext2_fs.h got a new function whose return value is only
defined if __KERNEL__ is defined. Putting #ifdef __KERNEL__ around the
function seems to help, patch below.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Oleg noticed that the call of task_pid_nr_ns() in proc_pid_readdir
is racy with respect to tasks exiting.
After a bit of examination it also appears that the call itself
is completely unnecessary.
So to fix the problem this patch modifies next_tgid() to return
both a tgid and the task struct in question.
A structure is introduced to return these values because it is
slightly cleaner and easier to optimize, and the resulting code
is a little shorter.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
proc_kill_inodes() can clear ->i_fop in the middle of vfs_readdir resulting in
NULL dereference during "file->f_op->readdir(file, buf, filler)".
The solution is to remove proc_kill_inodes() completely:
a) we don't have tricky modules implementing their tricky readdir hooks which
could keeping this revoke from hell.
b) In a situation when module is gone but PDE still alive, standard
readdir will return only "." and "..", because pde->next was cleared by
remove_proc_entry().
c) the race proc_kill_inode() destined to prevent is not completely
fixed, just race window made smaller, because vfs_readdir() is run
without sb_lock held and without file_list_lock held. Effectively,
->i_fop is cleared at random moment, which can't fix properly anything.
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000018
printing eip: c1061205 *pdpt = 0000000005b22001 *pde = 0000000000000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: foo af_packet ipv6 cpufreq_ondemand loop serio_raw sr_mod k8temp cdrom hwmon amd_rng
Pid: 2033, comm: find Not tainted (2.6.24-rc1-b1d08ac064268d0ae2281e98bf5e82627e0f0c56 #2)
EIP: 0060:[<c1061205>] EFLAGS: 00010246 CPU: 0
EIP is at vfs_readdir+0x47/0x74
EAX: c6b6a780 EBX: 00000000 ECX: c1061040 EDX: c5decf94
ESI: c6b6a780 EDI: fffffffe EBP: c9797c54 ESP: c5decf78
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process find (pid: 2033, ti=c5dec000 task=c64bba90 task.ti=c5dec000)
Stack: c5decf94 c1061040 fffffff7 0805ffbc 00000000 c6b6a780 c1061295 0805ffbc
00000000 00000400 00000000 00000004 0805ffbc 4588eff4 c5dec000 c10026ba
00000004 0805ffbc 00000400 0805ffbc 4588eff4 bfdc6c70 000000dc 0000007b
Call Trace:
[<c1061040>] filldir64+0x0/0xc5
[<c1061295>] sys_getdents64+0x63/0xa5
[<c10026ba>] sysenter_past_esp+0x5f/0x85
=======================
Code: 49 83 78 18 00 74 43 8d 6b 74 bf fe ff ff ff 89 e8 e8 b8 c0 12 00 f6 83 2c 01 00 00 10 75 22 8b 5e 10 8b 4c 24 04 89 f0 8b 14 24 <ff> 53 18 f6 46 1a 04 89 c7 75 0b 8b 56 0c 8b 46 08 e8 c8 66 00
EIP: [<c1061205>] vfs_readdir+0x47/0x74 SS:ESP 0068:c5decf78
hch: "Nice, getting rid of this is a very good step formwards.
Unfortunately we have another copy of this junk in
security/selinux/selinuxfs.c:sel_remove_entries() which would need the
same treatment."
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
sysfs: fix off-by-one error in fill_read_buffer()
kobject: two typo fixes
UIO: add UIO documentation target to DocBook Makefile
UIO: fix up the UIO documentation
create /sys/.../power when CONFIG_PM is set
allow LEGACY_PTYS to be set to 0
|
|
I found that there is a off-by-one problem in the following code.
Version: 2.6.24-rc2
File: fs/sysfs/file.c:118-122
Function: fill_read_buffer
--------------------------------------------------------------------
count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page);
sysfs_put_active_two(attr_sd);
BUG_ON(count > (ssize_t)PAGE_SIZE);
--------------------------------------------------------------------
Because according to the specification of the sysfs and the implement of
the show methods, the show methods return the number of bytes which would
be generated for the given input, excluding the trailing null.So if the
return value of the show methods equals PAGE_SIZE - 1, the buffer is full
in fact. And if the return value equals PAGE_SIZE, the resulting string
was already truncated,or buffer overflow occurred.
This patch fixes an off-by-one error in fill_read_buffer.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <teheo@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
fix: http://bugzilla.kernel.org/show_bug.cgi?id=3043
only allow coredumping to the same uid that the coredumping
task runs under.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set
i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate
sets i_size, and punching a hole ignores it.
This exposed a problem where punching a hole in an inline-data file wasn't
updating the page cache, so fix that too.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
This was causing us to prematurely push out inline data by one byte.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
The existing bug statement didn't take into account unhashed dentries which
might not have a cluster lock on them. This could happen if a node exporting
the file system via NFS is rebooted, re-exported to nfs clients and then
unmounted. It's fine in this case to not have a dentry cluster lock.
Just remove the bug statement and replace it with an error print, which
does the proper checks. Though we want to know if something has happened
which might have prevented a cluster lock from being created, it's
definitely not necessary to panic the machine for this.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
If the inode block isn't valid then we don't want to print the value from
that, instead print the block number which was passed in (which should
always be correct). Also, turn this into a debug print for now - folks who
hit an actual problem always have other logs indicating what the source is.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
It's almost never worth printing in that situation and we keep forgetting to
manually filter it out.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Right now we're just setting them from the existing parameters, not the
new ones that a remount specified.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
NFS: Clean up new multi-segment direct I/O changes
NFS: Ensure we return zero if applications attempt to write zero bytes
NFS: Support multiple segment iovecs in the NFS direct I/O path
NFS: Introduce iovec I/O helpers to fs/nfs/direct.c
SUNRPC: Add missing "space" to net/sunrpc/auth_gss.c
SUNRPC: make sunrpc/xprtsock.c:xs_setup_{udp,tcp}() static
NFS: fs/nfs/dir.c should #include "internal.h"
NFS: make nfs_wb_page_priority() static
NFS: mount failure causes bad page state
SUNRPC: remove NFS/RDMA client's binary sysctls
kernel BUG at fs/nfs/namespace.c:108! - can be triggered by bad server
sunrpc: rpc_pipe_poll may miss available data in some cases
sunrpc: return error if unsupported enctype or cksumtype is encountered
sunrpc: gss_pipe_downcall(), don't assume all errors are transient
NFS: Fix the ustat() regression
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
sched: bump version of kernel/sched_debug.c
sched: fix minimum granularity tunings
sched: fix RLIMIT_CPU comment
sched: fix kernel/acct.c comment
sched: fix prev_stime calculation
sched: don't forget to unlock uids_mutex on error paths
|
|
Simplify calling sequence of nfs_direct_{read,write}_schedule(), and
rename them to reflect their new role.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
A zero byte count direct write request should be a successful no-op, not an
error.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Allow applications to perform asynchronous scatter-gather direct I/O
to NFS files.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Add helpers that iterate over multi-segment iovecs. These will
be used to support multi-segment scatter/gather direct I/O in a
later patch.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Every file should include the headers containing the prototypes for its global
functions (in this case nfs_access_cache_shrinker()).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfs_wb_page_priority() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
While testing a kernel based upon ecd744eec3aa8bbc949ec04ed3fbf7ecb2958a0e
(with wrong boot arguments), I got the following bad page state entry while
NFS was trying to mount it's rootfs:
IP-Config: Complete:
device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.101, domain=, nis-domain=(none),
bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.100
rpcbind: server 192.168.1.100 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.1.100
rpcbind: server 192.168.1.100 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.1.100 not responding, timed out
Root-NFS: Server returned error -5 while mounting /nfs/rootfs/
VFS: Unable to mount root fs via NFS, trying floppy.
Bad page state in process 'swapper'
page:c02b1260 flags:0x00000400 mapping:00000000 mapcount:0 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
[<c0023e34>] (dump_stack+0x0/0x14) from [<c0062570>] (bad_page+0x70/0xac)
[<c0062500>] (bad_page+0x0/0xac) from [<c0064914>] (free_hot_cold_page+0x80/0x178)
[<c0064894>] (free_hot_cold_page+0x0/0x178) from [<c0064a74>] (free_hot_page+0x14/0x18)
[<c0064a60>] (free_hot_page+0x0/0x18) from [<c0067078>] (put_page+0xf8/0x154)
[<c0066f80>] (put_page+0x0/0x154) from [<c007dbc8>] (kfree+0xc8/0xd0)
[<c007db00>] (kfree+0x0/0xd0) from [<c00cbb54>] (nfs_get_sb+0x230/0x710)
[<c00cb924>] (nfs_get_sb+0x0/0x710) from [<c0084334>] (vfs_kern_mount+0x58/0xac)[<c00842dc>] (vfs_kern_mount+0x0/0xac) from [<c00843c0>] (do_kern_mount+0x38/0xf4)
[<c0084388>] (do_kern_mount+0x0/0xf4) from [<c0099c7c>] (do_mount+0x1e8/0x614)
...
This seems to be caused by use of an uninitialised structure due to NULL
options being passed to nfs_validate_mount_data(). Ensure that the
parsed mount data is always initialised.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(Trond: added fix for the same bug in nfs4_validate_mount_data()).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Srivatsa Vaddagiri noticed occasionally incorrect CPU usage
values in top and tracked it down to stime going below 0 in
task_stime(). Negative values are possible there due to the
sampled nature of stime/utime.
Fix suggested by Balbir Singh.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
|
|
Spotted by the coverity scanner.
CC: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
|
|
Fix RedHat bug 329431
The idea here is separate "conscious" from "unconscious" flushes.
Conscious flushes are those due to a fsync() or close(). Unconscious
ones are flushes that occur as a side effect of some other operation or
due to memory pressure.
Currently, when an error occurs during an unconscious flush (ENOSPC or
EIO), we toss out the page and don't preserve that error to report to
the user when a conscious flush occurs. If after the unconscious flush,
there are no more dirty pages for the inode, the conscious flush will
simply return success even though there were previous errors when writing
out pages. This can lead to data corruption.
The easiest way to reproduce this is to mount up a CIFS share that's
very close to being full or where the user is very close to quota. mv
a file to the share that's slightly larger than the quota allows. The
writes will all succeed (since they go to pagecache). The mv will do a
setattr to set the new file's attributes. This calls
filemap_write_and_wait,
which will return an error since all of the pages can't be written out.
Then later, when the flush and release ops occur, there are no more
dirty pages in pagecache for the file and those operations return 0. mv
then assumes that the file was written out correctly and deletes the
original.
CIFS already has a write_behind_rc variable where it stores the results
from earlier flushes, but that value is only reported in cifs_close.
Since the VFS ignores the return value from the release operation, this
isn't helpful. We should be reporting this error during the flush
operation.
This patch does the following:
1) changes cifs_fsync to use filemap_write_and_wait and cifs_flush and also
sync to check its return code. If it returns successful, they then check
the value of write_behind_rc to see if an earlier flush had reported any
errors. If so, they return that error and clear write_behind_rc.
2) sets write_behind_rc in a few other places where pages are written
out as a side effect of other operations and the code waits on them.
3) changes cifs_setattr to only call filemap_write_and_wait for
ATTR_SIZE changes.
4) makes cifs_writepages accurately distinguish between EIO and ENOSPC
errors when writing out pages.
Some simple testing indicates that the patch works as expected and that
it fixes the reproduceable known problem.
Acked-by: Dave Kleikamp <shaggy@austin.rr.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
When retrying kernel_recvmsg() because of a short read, check returned
length against the remaining length, not against total length. This
avoids unneeded session reconnects which would otherwise occur when
kernel_recvmsg() finally returns zero when asked to read zero bytes.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Hi Trond,
I have discovered that the BUG_ON in nfs_follow_mountpoint:
BUG_ON(IS_ROOT(dentry));
can be triggered by a misbehaving server.
What happens is the client does a lookup and discoveres that the named
directory has a different fsid, so it initiates a mount.
It then performs a GETATTR on the mounted directory and gets a
different fsid again (due to a bug in the NFS server).
This causes nfs_follow_mountpoint to be called on the newly mounted
root, which triggers the BUG_ON.
To duplicate this, have a directory which contains some mountpoints,
and export that directory with the "crossmnt" flag using nfs-utils
1.1.1 (or 1.1.0 I think)
The GETATTR on the root of the mounted filesystem will return the
information for the top exportpoint, while a lookup will return the
correct information. This difference causes the NFS client to BUG.
I think the best way to fix this is to trap this possibility early, so
just before completing the mount in the NFS client, check that it isn't
going to use nfs_mountpoint_inode_operations.
As long as i_op will never change once set (is that true?), this
should be adequately safe.
The following patch shows a possible approach, and it works for me.
i.e. when the NFS server is misbehaving, I get ESTALE on those
mountpoints, while when the NFS server is working correctly, I get
correct behaviour on the client.
NeilBrown
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Since 2.6.18, the superblock sb->s_root has been a dummy dentry with a
dummy inode. This breaks ustat(), which actually uses sb->s_root in a
vfstat() call.
Fix this by making the s_root a dummy alias to the directory inode that was
used when creating the superblock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Have CIFS_SessSetup call cifs_get_spnego_key when Kerberos is
negotiated. Use the info in the key payload to build a session
setup request packet. Also clean up how the request buffer in
the function is freed on error.
With appropriate user space helper (in samba/source/client). Kerberos
support (secure session establishment can be done now via Kerberos,
previously users would have to use NTLMv2 instead for more secure
session setup).
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
