| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
When CONFIRMED_R is set, the client throws away the sequence ID
returned by the server. During a Transparent State Migration, however
there's no other way for the client to know what sequence ID to use
with a lease that's been migrated.
Therefore, the client must save and use the contrived slot sequence
value returned by the destination server even when CONFIRMED_R is
set.
Note that some servers always return a seqid of 1 after a migration.
Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
Normally, when CONFIRMED_R is set, a client purges the lease and
creates a new one. However, that throws away the entire benefit of
Transparent State Migration.
Therefore, the client must not purge that lease when it is possible
that Transparent State Migration has occurred.
Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If an NFS server returns a filehandle that we have previously
seen, and reports a different type, then nfs_refresh_inode()
will log a warning and return an error.
nfs_fhget() does not check for this error and may return an
inode with a different type than the one that the server
reported.
This is likely to cause confusion, and is one way that
->open_context() could return a directory inode as discussed
in the previous patch.
So if nfs_refresh_inode() returns and error, return that error
from nfs_fhget() to avoid the confusion propagating.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A confused server could return a filehandle for an
NFSv4 OPEN request, which it previously returned for a directory.
So the inode returned by ->open_context() in nfs_atomic_open()
could conceivably be a directory inode.
This has particular implications for the call to
nfs_file_set_open_context() in nfs_finish_open().
If that is called on a directory inode, then the nfs_open_context
that gets stored in the filp->private_data will be linked to
nfs_inode->open_files.
When the directory is closed, nfs_closedir() will (ultimately)
free the ->private_data, but not unlink it from nfs_inode->open_files
(because it doesn't expect an nfs_open_context there).
Subsequently the memory could get used for something else and eventually
if the ->open_files list is walked, the walker will fall off the end and
crash.
So: change nfs_finish_open() to only call nfs_file_set_open_context()
for regular-file inodes.
This failure mode has been seen in a production setting (unknown NFS
server implementation). The kernel was v3.0 and the specific sequence
seen would not affect more recent kernels, but I think a risk is still
present, and caution is wise.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Since commit bafc9b754f75 ("vfs: More precise tests in d_invalidate")
in v3.18, a return of '0' from ->d_revalidate() will cause the dentry
to be invalidated even if it has filesystems mounted on or it or on a
descendant. The mounted filesystem is unmounted.
This means we need to be careful not to return 0 unless the directory
referred to truly is invalid. So -ESTALE or -ENOENT should invalidate
the directory. Other errors such a -EPERM or -ERESTARTSYS should be
returned from ->d_revalidate() so they are propagated to the caller.
A particular problem can be demonstrated by:
1/ mount an NFS filesystem using NFSv3 on /mnt
2/ mount any other filesystem on /mnt/foo
3/ ls /mnt/foo
4/ turn off network, or otherwise make the server unable to respond
5/ ls /mnt/foo &
6/ cat /proc/$!/stack # note that nfs_lookup_revalidate is in the call stack
7/ kill -9 $! # this results in -ERESTARTSYS being returned
8/ observe that /mnt/foo has been unmounted.
This patch changes nfs_lookup_revalidate() to only treat
-ESTALE from nfs_lookup_verify_inode() and
-ESTALE or -ENOENT from ->lookup()
as indicating an invalid inode. Other errors are returned.
Also nfs_check_inode_attributes() is changed to return -ESTALE rather
than -EIO. This is consistent with the error returned in similar
circumstances from nfs_update_inode().
As this bug allows any user to unmount a filesystem mounted on an NFS
filesystem, this fix is suitable for stable kernels.
Fixes: bafc9b754f75 ("vfs: More precise tests in d_invalidate")
Cc: stable@vger.kernel.org (v3.18+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Upon receiving a stateid error such as BAD_STATEID, the client
should retry the operation against the MDS before deciding to
do stateid recovery.
Previously, the code would initiate state recovery and it could
lead to a race in a state manager that could chose an incorrect
recovery method which would lead to the EIO failure for the
application.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit fabbbee0eb0f "PNFS fix fallback to MDS if got error on
commit to DS" moved the pnfs_set_lo_fail() to unhandled errors
which was not correct and lead to a kernel oops on umount.
Instead, fix the original EACCESS on commit to DS error by
getting the new layout and re-doing the IO.
Fixes: fabbbee0eb0f ("PNFS fix fallback to MDS if got error on commit to DS")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Static checkers have gotten clever enough to complain that "id_long" is
uninitialized on the failure path. It's harmless, but simple to fix.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
nfs_show_stats() was incorrectly reading statistics for bytes when printing that
for fsc. It caused files like /proc/self/mountstats to report incorrect fsc
statistics for NFS mounts.
Signed-off-by: Tuo Chen Peng <tpeng@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 8ef9b0b9e1c0 open-coded nfs_pgarray_set(), and left out the
initialization of the nfs_page_array's npages. This mistake didn't show up
until testing with block layouts, and there shows that all pNFS reads
return -EIO.
Fixes: 8ef9b0b9e1c0 ("NFS: move nfs_pgarray_set() to open code")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Now that the writes will schedule a commit on their own, we don't
need nfs_write_inode() to schedule one if there are outstanding
writes, and we're being called in non-blocking mode.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the page cache is being flushed, then we want to ensure that we
do start a commit once the pages are done being flushed.
If we just wait until all I/O is done to that file, we can end up
livelocking until the balance_dirty_pages() mechanism puts its
foot down and forces I/O to stop.
So instead we do more or less the same thing that O_DIRECT does,
and set up a counter to tell us when the flush is done,
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Remove the 'layout_private' fields that were only used by the pNFS OSD
layout driver.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
An interrupted rename will leave the old dentry behind if the rename
succeeds. Fix this by forcing a lookup the next time through
->d_revalidate.
A previous attempt at solving this problem took the approach to complete
the work of the rename asynchronously, however that approach was wrong
since it would allow the d_move() to occur after the directory's i_mutex
had been dropped by the original process.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
NFS uses some int, and unsigned int :1, and bool as flags in structs and
args. Assert the preference for uniformly replacing these with the bool
type.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The current code worked okay for getdents(), but getdents64() expects
the d_type field to get filled out properly in the stat structure.
Setting this field fixes xfstests generic/401.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
nfsd4_ops contains function pointers, and marking it as constant avoids
it being able to be used as an attach vector for code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
pc_count is the only writeable memeber of struct svc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct svc_procinfo, and into a
separate writable array that is pointed to by struct svc_version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pass union nfsd4_op_u to the op_func callbacks instead of using unsafe
function pointer casts.
It also adds two missing structures to struct nfsd4_op.u to facilitate
this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Except for a lot of unnecessary casts this typedef only has one user,
so remove the casts and expand it in struct nfsd4_operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pass union nfsd4_op_u to the op_set_currentstateid callbacks instead of
using unsafe function pointer casts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Given the args union in struct nfsd4_op a name, and pass it to the
op_set_currentstateid callbacks instead of using unsafe function
pointer casts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Drop the resp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Drop the argp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Drop the p and resp arguments as they are always NULL or can trivially
be derived from the rqstp argument. With that all functions now have the
same prototype, and we can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument. With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
struct rpc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
p_count is the only writeable memeber of struct rpc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct rpc_procinfo, and into a
separate writable array that is pointed to by struct rpc_version and
indexed by p_statidx.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove double indentation of a few struct rpc_version and
struct rpc_program instance.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Instead declare all functions with the proper methods signature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Merge yet more updates from Andrew Morton:
- various misc things
- kexec updates
- sysctl core updates
- scripts/gdb udpates
- checkpoint-restart updates
- ipc updates
- kernel/watchdog updates
- Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature"
- "stackprotector: ascii armor the stack canary"
- more MM bits
- checkpatch updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
writeback: rework wb_[dec|inc]_stat family of functions
ARM: samsung: usb-ohci: move inline before return type
video: fbdev: omap: move inline before return type
video: fbdev: intelfb: move inline before return type
USB: serial: safe_serial: move __inline__ before return type
drivers: tty: serial: move inline before return type
drivers: s390: move static and inline before return type
x86/efi: move asmlinkage before return type
sh: move inline before return type
MIPS: SMP: move asmlinkage before return type
m68k: coldfire: move inline before return type
ia64: sn: pci: move inline before type
ia64: move inline before return type
FRV: tlbflush: move asmlinkage before return type
CRIS: gpio: move inline before return type
ARM: HP Jornada 7XX: move inline before return type
ARM: KVM: move asmlinkage before type
checkpatch: improve the STORAGE_CLASS test
mm, migration: do not trigger OOM killer when migrating memory
drm/i915: use __GFP_RETRY_MAYFAIL
...
|
|
The recent changes to make bio cloning faster (added in the 4.13 merge
window) by using the bio_clone_fast() API introduced a regression on
raid5/6 modes, because cloned bios have an invalid bi_vcnt field
(therefore it can not be used) and the raid5/6 code uses the
bio_for_each_segment_all() API to iterate the segments of a bio, and this
API uses a bio's bi_vcnt field.
The issue is very simple to trigger by doing for example a direct IO write
against a raid5 or raid6 filesystem and then attempting to read what we
wrote before:
$ mkfs.btrfs -m raid5 -d raid5 -f /dev/sdc /dev/sdd /dev/sde /dev/sdf
$ mount /dev/sdc /mnt
$ xfs_io -f -d -c "pwrite -S 0xab 0 1M" /mnt/foobar
$ od -t x1 /mnt/foobar
od: /mnt/foobar: read error: Input/output error
For that example, the following is also reported in dmesg/syslog:
[18274.985557] btrfs_print_data_csum_error: 18 callbacks suppressed
[18274.995277] BTRFS warning (device sdf): csum failed root 5 ino 257 off 0 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18274.997205] BTRFS warning (device sdf): csum failed root 5 ino 257 off 4096 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18275.025221] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18275.047422] BTRFS warning (device sdf): csum failed root 5 ino 257 off 12288 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18275.054818] BTRFS warning (device sdf): csum failed root 5 ino 257 off 4096 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18275.054834] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18275.054943] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 2
[18275.055207] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 3
[18275.055571] BTRFS warning (device sdf): csum failed root 5 ino 257 off 0 csum 0x98f94189 expected csum 0x94374193 mirror 1
[18275.062171] BTRFS warning (device sdf): csum failed root 5 ino 257 off 12288 csum 0x98f94189 expected csum 0x94374193 mirror 1
A scrub will also fail correcting bad copies, mentioning the following in
dmesg/syslog:
[18276.128696] scrub_handle_errored_block: 498 callbacks suppressed
[18276.129617] BTRFS warning (device sdf): checksum error at logical 2186346496 on dev /dev/sde, sector 2116608, root 5, inode 257, offset 65536, length 4096, links $
[18276.149235] btrfs_dev_stat_print_on_error: 498 callbacks suppressed
[18276.157897] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
[18276.206059] BTRFS warning (device sdf): checksum error at logical 2186477568 on dev /dev/sdd, sector 2116736, root 5, inode 257, offset 196608, length 4096, links$
[18276.206059] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
[18276.306552] BTRFS warning (device sdf): checksum error at logical 2186543104 on dev /dev/sdd, sector 2116864, root 5, inode 257, offset 262144, length 4096, links$
[18276.319152] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
[18276.394316] BTRFS warning (device sdf): checksum error at logical 2186739712 on dev /dev/sdf, sector 2116992, root 5, inode 257, offset 458752, length 4096, links$
[18276.396348] BTRFS error (device sdf): bdev /dev/sdf errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
[18276.434127] BTRFS warning (device sdf): checksum error at logical 2186870784 on dev /dev/sde, sector 2117120, root 5, inode 257, offset 589824, length 4096, links$
[18276.434127] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
[18276.500504] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186477568 on dev /dev/sdd
[18276.538400] BTRFS warning (device sdf): checksum error at logical 2186481664 on dev /dev/sdd, sector 2116744, root 5, inode 257, offset 200704, length 4096, links$
[18276.540452] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
[18276.542012] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186481664 on dev /dev/sdd
[18276.585030] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186346496 on dev /dev/sde
[18276.598306] BTRFS warning (device sdf): checksum error at logical 2186412032 on dev /dev/sde, sector 2116736, root 5, inode 257, offset 131072, length 4096, links$
[18276.598310] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
[18276.598582] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186350592 on dev /dev/sde
[18276.603455] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 4, gen 0
[18276.638362] BTRFS warning (device sdf): checksum error at logical 2186354688 on dev /dev/sde, sector 2116624, root 5, inode 257, offset 73728, length 4096, links $
[18276.640445] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 5, gen 0
[18276.645942] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186354688 on dev /dev/sde
[18276.657204] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186412032 on dev /dev/sde
[18276.660563] BTRFS warning (device sdf): checksum error at logical 2186416128 on dev /dev/sde, sector 2116744, root 5, inode 257, offset 135168, length 4096, links$
[18276.664609] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 6, gen 0
[18276.664609] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186358784 on dev /dev/sde
So fix this by using the bio_for_each_segment() API and setting before
the bio's bi_iter field to the value of the corresponding btrfs bio
container's saved iterator if we are processing a cloned bio in the
raid5/6 code (the same code processes both cloned and non-cloned bios).
This incorrect iteration of cloned bios was also causing some occasional
BUG_ONs when running fstest btrfs/064, which have a trace like the
following:
[ 6674.416156] ------------[ cut here ]------------
[ 6674.416157] kernel BUG at fs/btrfs/raid56.c:1897!
[ 6674.416159] invalid opcode: 0000 [#1] PREEMPT SMP
[ 6674.416160] Modules linked in: dm_flakey dm_mod dax ppdev tpm_tis parport_pc tpm_tis_core evdev tpm psmouse sg i2c_piix4 pcspkr parport i2c_core serio_raw button s
[ 6674.416184] CPU: 3 PID: 19236 Comm: kworker/u32:10 Not tainted 4.12.0-rc6-btrfs-next-44+ #1
[ 6674.416185] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 6674.416210] Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
[ 6674.416211] task: ffff880147f6c740 task.stack: ffffc90001fb8000
[ 6674.416229] RIP: 0010:__raid_recover_end_io+0x1ac/0x370 [btrfs]
[ 6674.416230] RSP: 0018:ffffc90001fbbb90 EFLAGS: 00010217
[ 6674.416231] RAX: ffff8801ff4b4f00 RBX: 0000000000000002 RCX: 0000000000000001
[ 6674.416232] RDX: ffff880099b045d8 RSI: ffffffff81a5f6e0 RDI: 0000000000000004
[ 6674.416232] RBP: ffffc90001fbbbc8 R08: 0000000000000001 R09: 0000000000000001
[ 6674.416233] R10: ffffc90001fbbac8 R11: 0000000000001000 R12: 0000000000000002
[ 6674.416234] R13: ffff880099b045c0 R14: 0000000000000004 R15: ffff88012bff2000
[ 6674.416235] FS: 0000000000000000(0000) GS:ffff88023f2c0000(0000) knlGS:0000000000000000
[ 6674.416235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6674.416236] CR2: 00007f28cf282000 CR3: 00000001000c6000 CR4: 00000000000006e0
[ 6674.416239] Call Trace:
[ 6674.416259] __raid56_parity_recover+0xfc/0x16e [btrfs]
[ 6674.416276] raid56_parity_recover+0x157/0x16b [btrfs]
[ 6674.416293] btrfs_map_bio+0xe0/0x259 [btrfs]
[ 6674.416310] btrfs_submit_bio_hook+0xbf/0x147 [btrfs]
[ 6674.416327] end_bio_extent_readpage+0x27b/0x4a0 [btrfs]
[ 6674.416331] bio_endio+0x17d/0x1b3
[ 6674.416346] end_workqueue_fn+0x3c/0x3f [btrfs]
[ 6674.416362] btrfs_scrubparity_helper+0x1aa/0x3b8 [btrfs]
[ 6674.416379] btrfs_endio_helper+0xe/0x10 [btrfs]
[ 6674.416381] process_one_work+0x276/0x4b6
[ 6674.416384] worker_thread+0x1ac/0x266
[ 6674.416386] ? rescuer_thread+0x278/0x278
[ 6674.416387] kthread+0x106/0x10e
[ 6674.416389] ? __list_del_entry+0x22/0x22
[ 6674.416391] ret_from_fork+0x27/0x40
[ 6674.416395] Code: 44 89 e2 be 00 10 00 00 ff 15 b0 ab ef ff eb 72 4d 89 e8 89 d9 44 89 e2 be 00 10 00 00 ff 15 a3 ab ef ff eb 5d 41 83 fc ff 74 02 <0f> 0b 49 63 97
[ 6674.416432] RIP: __raid_recover_end_io+0x1ac/0x370 [btrfs] RSP: ffffc90001fbbb90
[ 6674.416434] ---[ end trace 74d56ebe7489dd6a ]---
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
|
|
The isofs patch needs a small fix to handle a signed/unsigned comparison that
the compiler didn't flag - thanks to Dan for catching it.
It should be noted, however, the session number handing appears to be incorrect
between where it is parsed and where it is used.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Buffer heads referencing indirect blocks may not be released if the file
is truncated at the right time. This happens because ext2_get_branch()
returns NULL when it finds the whole chain of indirect blocks already
set, and when truncate alters the chain this value of NULL is
treated as the address of the last head to be released. Handle this in the
same way as it's done after the got_it label.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sysctl fix from Eric Biederman:
"A rather embarassing and hard to hit bug was merged into 4.11-rc1.
Andrei Vagin tracked this bug now and after some staring at the code
I came up with a fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Fix proc_sys_prune_dcache to hold a sb reference
|
|
Currently the writeback statistics code uses a percpu counters to hold
various statistics. Furthermore we have 2 families of functions - those
which disable local irq and those which doesn't and whose names begin
with double underscore. However, they both end up calling
__add_wb_stats which in turn calls percpu_counter_add_batch which is
already irq-safe.
Exploiting this fact allows to eliminated the __wb_* functions since
they don't add any further protection than we already have.
Furthermore, refactor the wb_* function to call __add_wb_stat directly
without the irq-disabling dance. This will likely result in better
runtime of code which deals with modifying the stat counters.
While at it also document why percpu_counter_add_batch is in fact
preempt and irq-safe since at least 3 people got confused.
Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
KM_MAYFAIL didn't have any suitable GFP_FOO counterpart until recently
so it relied on the default page allocator behavior for the given set of
flags. This means that small allocations actually never failed.
Now that we have __GFP_RETRY_MAYFAIL flag which works independently on
the allocation request size we can map KM_MAYFAIL to it. The allocator
will try as hard as it can to fulfill the request but fails eventually
if the progress cannot be made. It does so without triggering the OOM
killer which can be seen as an improvement because KM_MAYFAIL users
should be able to deal with allocation failures.
Link: http://lkml.kernel.org/r/20170623085345.11304-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
