summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_dsBaptiste Lepers2-4/+4
[ Upstream commit a2915fa06227b056a8f9b0d79b61dca08ad5cfc6 ] _nfs4_pnfs_v3/v4_ds_connect do some work smp_wmb ds->ds_clp = clp; And nfs4_ff_layout_prepare_ds currently does smp_rmb if(ds->ds_clp) ... This patch places the smp_rmb after the if. This ensures that following reads only happen once nfs4_ff_layout_prepare_ds has checked that data has been properly initialized. Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18NFS: Fix dentry verifier racesTrond Myklebust1-4/+3
[ Upstream commit cec08f452a687fce9dfdf47946d00a1d12a8bec5 ] If the directory changed while we were revalidating the dentry, then don't update the dentry verifier. There is no value in setting the verifier to an older value, and we could end up overwriting a more up to date verifier from a parallel revalidation. Fixes: efeda80da38d ("NFSv4: Fix revalidation of dentries with delegations") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18NFS: Ignore the directory size when marking for revalidationTrond Myklebust1-1/+1
[ Upstream commit a6a361c4ca3cc3e6f3b39d1b6bca1de90f5f4b11 ] If we want to revalidate the directory, then just mark the change attribute as invalid. Fixes: 13c0b082b6a9 ("NFS: Replace use of NFS_INO_REVAL_PAGECACHE when checking cache validity") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18NFS: Don't set NFS_INO_DATA_INVAL_DEFER and NFS_INO_INVALID_DATATrond Myklebust1-2/+7
[ Upstream commit 488796ec1e39fb9194cc8175f770823d40fbf0ed ] NFS_INO_DATA_INVAL_DEFER and NFS_INO_INVALID_DATA should be considered mutually exclusive. Fixes: 1c341b777501 ("NFS: Add deferred cache invalidation for close-to-open consistency violations") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18NFS: Default change_attr_type to NFS4_CHANGE_TYPE_IS_UNDEFINEDTrond Myklebust3-3/+5
[ Upstream commit eea413308f2e6deb00f061f18081a53f3ecc8cc6 ] Both NFSv3 and NFSv2 generate their change attribute from the ctime value that was supplied by the server. However the problem is that there are plenty of servers out there with ctime resolutions of 1ms or worse. In a modern performance system, this is insufficient when trying to decide which is the most recent set of attributes when, for instance, a READ or GETATTR call races with a WRITE or SETATTR. For this reason, let's revert to labelling the NFSv2/v3 change attributes as NFS4_CHANGE_TYPE_IS_UNDEFINED. This will ensure we protect against such races. Fixes: 7b24dacf0840 ("NFS: Another inode revalidation improvement") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18JFS: fix memleak in jfs_mountDongliang Mu1-29/+22
[ Upstream commit c48a14dca2cb57527dde6b960adbe69953935f10 ] In jfs_mount, when diMount(ipaimap2) fails, it goes to errout35. However, the following code does not free ipaimap2 allocated by diReadSpecial. Fix this by refactoring the error handling code of jfs_mount. To be specific, modify the lable name and free ipaimap2 when the above error ocurrs. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18io-wq: Remove duplicate code in io_workqueue_create()Bixuan Cui1-5/+4
[ Upstream commit 71e1cef2d794338cc7b979d4c6144e1dc12718b5 ] While task_work_add() in io_workqueue_create() is true, then duplicate code is executed: -> clear_bit_unlock(0, &worker->create_state); -> io_worker_release(worker); -> atomic_dec(&acct->nr_running); -> io_worker_ref_put(wq); -> return false; -> clear_bit_unlock(0, &worker->create_state); // back to io_workqueue_create() -> io_worker_release(worker); -> kfree(worker); The io_worker_release() and clear_bit_unlock() are executed twice. Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals") Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210911085847.34849-1-cuibixuan@huawei.com Reviwed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18erofs: don't trigger WARN() when decompression failsGao Xiang1-1/+0
[ Upstream commit a0961f351d82d43ab0b845304caa235dfe249ae9 ] syzbot reported a WARNING [1] due to corrupted compressed data. As Dmitry said, "If this is not a kernel bug, then the code should not use WARN. WARN if for kernel bugs and is recognized as such by all testing systems and humans." [1] https://lore.kernel.org/r/000000000000b3586105cf0ff45e@google.com Link: https://lore.kernel.org/r/20211025074311.130395-1-hsiangkao@linux.alibaba.com Cc: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Reported-by: syzbot+d8aaffc3719597e8cfb4@syzkaller.appspotmail.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18btrfs: do not take the uuid_mutex in btrfs_rm_deviceJosef Bacik1-5/+5
[ Upstream commit 8ef9dc0f14ba6124c62547a4fdc59b163d8b864e ] We got the following lockdep splat while running fstests (specifically btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered by 87579e9b7d8d ("loop: use worker per cgroup instead of kworker") which converted loop to using workqueues, which comes with lockdep annotations that don't exist with kworkers. The lockdep splat is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc2-custom+ #34 Not tainted ------------------------------------------------------ losetup/156417 is trying to acquire lock: ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600 but task is already holding lock: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x28/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x163/0x3a0 path_openat+0x74d/0xa40 do_filp_open+0x9c/0x140 do_sys_openat2+0xb1/0x170 __x64_sys_openat+0x54/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 blkdev_get_by_dev.part.0+0xd1/0x3c0 blkdev_get_by_path+0xc0/0xd0 btrfs_scan_one_device+0x52/0x1f0 [btrfs] btrfs_control_ioctl+0xac/0x170 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (uuid_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 btrfs_rm_device+0x48/0x6a0 [btrfs] btrfs_ioctl+0x2d1c/0x3110 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#11){.+.+}-{0:0}: lo_write_bvec+0x112/0x290 [loop] loop_process_work+0x25f/0xcb0 [loop] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x266/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 flush_workqueue+0xae/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/156417: #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] stack backtrace: CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0x10a/0x120 __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 ? flush_workqueue+0x84/0x600 flush_workqueue+0xae/0x600 ? flush_workqueue+0x84/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] ? __lock_acquire+0x3a0/0x1dc0 ? update_dl_rq_load_avg+0x152/0x360 ? lock_is_held_type+0xa5/0x120 ? find_held_lock.constprop.0+0x2b/0x80 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f645884de6b Usually the uuid_mutex exists to protect the fs_devices that map together all of the devices that match a specific uuid. In rm_device we're messing with the uuid of a device, so it makes sense to protect that here. However in doing that it pulls in a whole host of lockdep dependencies, as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus we end up with the dependency chain under the uuid_mutex being added under the normal sb write dependency chain, which causes problems with loop devices. We don't need the uuid mutex here however. If we call btrfs_scan_one_device() before we scratch the super block we will find the fs_devices and not find the device itself and return EBUSY because the fs_devices is open. If we call it after the scratch happens it will not appear to be a valid btrfs file system. We do not need to worry about other fs_devices modifying operations here because we're protected by the exclusive operations locking. So drop the uuid_mutex here in order to fix the lockdep splat. A more detailed explanation from the discussion: We are worried about rm and scan racing with each other, before this change we'll zero the device out under the UUID mutex so when scan does run it'll make sure that it can go through the whole device scan thing without rm messing with us. We aren't worried if the scratch happens first, because the result is we don't think this is a btrfs device and we bail out. The only case we are concerned with is we scratch _after_ scan is able to read the superblock and gets a seemingly valid super block, so lets consider this case. Scan will call device_list_add() with the device we're removing. We'll call find_fsid_with_metadata_uuid() and get our fs_devices for this UUID. At this point we lock the fs_devices->device_list_mutex. This is what protects us in this case, but we have two cases here. 1. We aren't to the device removal part of the RM. We found our device, and device name matches our path, we go down and we set total_devices to our super number of devices, which doesn't affect anything because we haven't done the remove yet. 2. We are past the device removal part, which is protected by the device_list_mutex. Scan doesn't find the device, it goes down and does the if (fs_devices->opened) return -EBUSY; check and we bail out. Nothing about this situation is ideal, but the lockdep splat is real, and the fix is safe, tho admittedly a bit scary looking. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ copy more from the discussion ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18btrfs: reflink: initialize return value to 0 in btrfs_extent_same()Sidong Yang1-1/+1
[ Upstream commit 44bee215f72f13874c0e734a0712c2e3264c0108 ] Fix a warning reported by smatch that ret could be returned without initialized. The dedupe operations are supposed to to return 0 for a 0 length range but the caller does not pass olen == 0. To keep this behaviour and also fix the warning initialize ret to 0. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Sidong Yang <realwakka@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18gfs2: Fix glock_hash_walk bugsAndreas Gruenbacher1-10/+12
[ Upstream commit 7427f3bb49d81525b7dd1d0f7c5f6bbc752e6f0e ] So far, glock_hash_walk took a reference on each glock it iterated over, and it was the examiner's responsibility to drop those references. Dropping the final reference to a glock can sleep and the examiners are called in a RCU critical section with spin locks held, so examiners that didn't need the extra reference had to drop it asynchronously via gfs2_glock_queue_put or similar. This wasn't done correctly in thaw_glock which did call gfs2_glock_put, and not at all in dump_glock_func. Change glock_hash_walk to not take glock references at all. That way, the examiners that don't need them won't have to bother with slow asynchronous puts, and the examiners that do need references can take them themselves. Reported-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18gfs2: Cancel remote delete work asynchronouslyAndreas Gruenbacher1-1/+1
[ Upstream commit 486408d690e130c3adacf816754b97558d715f46 ] In gfs2_inode_lookup and gfs2_create_inode, we're calling gfs2_cancel_delete_work which currently cancels any remote delete work (delete_work_func) synchronously. This means that if the work is currently running, it will wait for it to finish. We're doing this to pevent a previous instance of an inode from having any influence on the next instance. However, delete_work_func uses gfs2_inode_lookup internally, and we can end up in a deadlock when delete_work_func gets interrupted at the wrong time. For example, (1) An inode's iopen glock has delete work queued, but the inode itself has been evicted from the inode cache. (2) The delete work is preempted before reaching gfs2_inode_lookup. (3) Another process recreates the inode (gfs2_create_inode). It tries to cancel any outstanding delete work, which blocks waiting for the ongoing delete work to finish. (4) The delete work calls gfs2_inode_lookup, which blocks waiting for gfs2_create_inode to instantiate and unlock the new inode => deadlock. It turns out that when the delete work notices that its inode has been re-instantiated, it will do nothing. This means that it's safe to cancel the delete work asynchronously. This prevents the kind of deadlock described above. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18tracefs: Have tracefs directories not set OTH permission bits by defaultSteven Rostedt (VMware)1-1/+2
[ Upstream commit 49d67e445742bbcb03106b735b2ab39f6e5c56bc ] The tracefs file system is by default mounted such that only root user can access it. But there are legitimate reasons to create a group and allow those added to the group to have access to tracing. By changing the permissions of the tracefs mount point to allow access, it will allow group access to the tracefs directory. There should not be any real reason to allow all access to the tracefs directory as it contains sensitive information. Have the default permission of directories being created not have any OTH (other) bits set, such that an admin that wants to give permission to a group has to first disable all OTH bits in the file system. Link: https://lkml.kernel.org/r/20210818153038.664127804@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18fs/proc/uptime.c: Fix idle time reporting in /proc/uptimeJosh Don2-7/+11
[ Upstream commit a130e8fbc7de796eb6e680724d87f4737a26d0ac ] /proc/uptime reports idle time by reading the CPUTIME_IDLE field from the per-cpu kcpustats. However, on NO_HZ systems, idle time is not continually updated on idle cpus, leading this value to appear incorrectly small. /proc/stat performs an accounting update when reading idle time; we can use the same approach for uptime. With this patch, /proc/stat and /proc/uptime now agree on idle time. Additionally, the following shows idle time tick up consistently on an idle machine: (while true; do cat /proc/uptime; sleep 1; done) | awk '{print $2-prev; prev=$2}' Reported-by: Luigi Rizzo <lrizzo@google.com> Signed-off-by: Josh Don <joshdon@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lkml.kernel.org/r/20210827165438.3280779-1-joshdon@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18fscrypt: allow 256-bit master keys with AES-256-XTSEric Biggers3-17/+56
[ Upstream commit 7f595d6a6cdc336834552069a2e0a4f6d4756ddf ] fscrypt currently requires a 512-bit master key when AES-256-XTS is used, since AES-256-XTS keys are 512-bit and fscrypt requires that the master key be at least as long any key that will be derived from it. However, this is overly strict because AES-256-XTS doesn't actually have a 512-bit security strength, but rather 256-bit. The fact that XTS takes twice the expected key size is a quirk of the XTS mode. It is sufficient to use 256 bits of entropy for AES-256-XTS, provided that it is first properly expanded into a 512-bit key, which HKDF-SHA512 does. Therefore, relax the check of the master key size to use the security strength of the derived key rather than the size of the derived key (except for v1 encryption policies, which don't use HKDF). Besides making things more flexible for userspace, this is needed in order for the use of a KDF which only takes a 256-bit key to be introduced into the fscrypt key hierarchy. This will happen with hardware-wrapped keys support, as all known hardware which supports that feature uses an SP800-108 KDF using AES-256-CMAC, so the wrapped keys are wrapped 256-bit AES keys. Moreover, there is interest in fscrypt supporting the same type of AES-256-CMAC based KDF in software as an alternative to HKDF-SHA512. There is no security problem with such features, so fix the key length check to work properly with them. Reviewed-by: Paul Crowley <paulcrowley@google.com> Link: https://lore.kernel.org/r/20210921030303.5598-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18io-wq: serialize hash clear with wakeupJens Axboe1-2/+15
commit d3e3c102d107bb84251455a298cf475f24bab995 upstream. We need to ensure that we serialize the stalled and hash bits with the wait_queue wait handler, or we could be racing with someone modifying the hashed state after we find it busy, but before we then give up and wait for it to be cleared. This can cause random delays or stalls when handling buffered writes for many files, where some of these files cause hash collisions between the worker threads. Cc: stable@vger.kernel.org Reported-by: Daniel Black <daniel@mariadb.org> Fixes: e941894eae31 ("io-wq: make buffered file write hashed work map per-ctx") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ksmbd: set unique value to volume serial field in FS_VOLUME_INFORMATIONNamjae Jeon3-1/+10
commit 5d2f0b1083eb158bdff01dd557e2c25046c0a7d2 upstream. Steve French reported ksmbd set fixed value to volume serial field in FS_VOLUME_INFORMATION. Volume serial value needs to be set to a unique value for client fscache. This patch set crc value that is generated with share name, path name and netbios name to volume serial. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org # v5.15 Reported-by: Steve French <smfrench@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18cifs: set a minimum of 120s for next dns resolutionPaulo Alcantara2-2/+3
commit 4ac0536f8874a903a72bddc57eb88db774261e3a upstream. With commit 506c1da44fee ("cifs: use the expiry output of dns_query to schedule next resolution") and after triggering the first reconnect, the next async dns resolution of tcp server's hostname would be scheduled based on dns_resolver's key expiry default, which happens to default to 5s on most systems that use key.dns_resolver for upcall. As per key.dns_resolver.conf(5): default_ttl=<number> The number of seconds to set as the expiration on a cached record. This will be overridden if the program manages to re- trieve TTL information along with the addresses (if, for exam- ple, it accesses the DNS directly). The default is 5 seconds. The value must be in the range 1 to INT_MAX. Make the next async dns resolution no shorter than 120s as we do not want to be upcalling too often. Cc: stable@vger.kernel.org Fixes: 506c1da44fee ("cifs: use the expiry output of dns_query to schedule next resolution") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18cifs: To match file servers, make sure the server hostname matchesShyam Prasad N3-8/+20
commit 7be3248f313930ff3d3436d4e9ddbe9fccc1f541 upstream. We generally rely on a bunch of factors to differentiate between servers. For example, IP address, port etc. For certain server types (like Azure), it is important to make sure that the server hostname matches too, even if the both hostnames currently resolve to the same IP address. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18quota: correct error number in free_dqentry()Zhang Yi1-0/+1
commit d0e36a62bd4c60c09acc40e06ba4831a4d0bc75b upstream. Fix the error path in free_dqentry(), pass out the error number if the block to free is not correct. Fixes: 1ccd14b9c271 ("quota: Split off quota tree handling into a separate file") Link: https://lore.kernel.org/r/20211008093821.1001186-3-yi.zhang@huawei.com Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Cc: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18quota: check block number when reading the block in quota fileZhang Yi1-0/+14
commit 9bf3d20331295b1ecb81f4ed9ef358c51699a050 upstream. The block number in the quota tree on disk should be smaller than the v2_disk_dqinfo.dqi_blocks. If the quota file was corrupted, we may be allocating an 'allocated' block and that would lead to a loop in a tree, which will probably trigger oops later. This patch adds a check for the block number in the quota tree to prevent such potential issue. Link: https://lore.kernel.org/r/20211008093821.1001186-2-yi.zhang@huawei.com Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Cc: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ovl: fix filattr copy-up failureMiklos Szeredi2-6/+22
commit 5b0a414d06c3ed2097e32ef7944a4abb644b89bd upstream. This regression can be reproduced with ntfs-3g and overlayfs: mkdir lower upper work overlay dd if=/dev/zero of=ntfs.raw bs=1M count=2 mkntfs -F ntfs.raw mount ntfs.raw lower touch lower/file.txt mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work - overlay mv overlay/file.txt overlay/file2.txt mv fails and (misleadingly) prints mv: cannot move 'overlay/file.txt' to a subdirectory of itself, 'overlay/file2.txt' The reason is that ovl_copy_fileattr() is triggered due to S_NOATIME being set on all inodes (by fuse) regardless of fileattr. ovl_copy_fileattr() tries to retrieve file attributes from lower file, but that fails because filesystem does not support this ioctl (this should fail with ENOTTY, but ntfs-3g return EINVAL instead). This failure is propagated to origial operation (in this case rename) that triggered the copy-up. The fix is to ignore ENOTTY and EINVAL errors from fileattr_get() in copy up. This also requires turning the internal ENOIOCTLCMD into ENOTTY. As a further measure to prevent unnecessary failures, only try the fileattr_get/set on upper if there are any flags to copy up. Side note: a number of filesystems set S_NOATIME (and sometimes other inode flags) irrespective of fileattr flags. This causes unnecessary calls during copy up, which might lead to a performance issue, especially if latency is high. To fix this, the kernel would need to differentiate between the two cases. E.g. introduce SB_NOATIME_UPDATE, a per-sb variant of S_NOATIME. SB_NOATIME doesn't work, because that's interpreted as "filesystem doesn't store an atime attribute" Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name> Fixes: 72db82115d2b ("ovl: copy up sync/noatime fileattr flags") Cc: <stable@vger.kernel.org> # v5.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ovl: fix use after free in struct ovl_aio_reqyangerkun1-2/+14
commit 9a254403760041528bc8f69fe2f5e1ef86950991 upstream. Example for triggering use after free in a overlay on ext4 setup: aio_read ovl_read_iter vfs_iter_read ext4_file_read_iter ext4_dio_read_iter iomap_dio_rw -> -EIOCBQUEUED /* * Here IO is completed in a separate thread, * ovl_aio_cleanup_handler() frees aio_req which has iocb embedded */ file_accessed(iocb->ki_filp); /**BOOM**/ Fix by introducing a refcount in ovl_aio_req similarly to aio_kiocb. This guarantees that iocb is only freed after vfs_read/write_iter() returns on underlying fs. Fixes: 2406a307ac7d ("ovl: implement async IO routines") Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20210930032228.3199690-3-yangerkun@huawei.com/ Cc: <stable@vger.kernel.org> # v5.6 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18io_uring: honour zeroes as io-wq worker limitsPavel Begunkov1-1/+3
commit bad119b9a00019054f0c9e2045f312ed63ace4f4 upstream. When we pass in zero as an io-wq worker number limit it shouldn't actually change the limits but return the old value, follow that behaviour with deferred limits setup as well. Cc: stable@kernel.org # 5.15 Reported-by: Beld Zhang <beldzhang@gmail.com> Fixes: e139a1ec92f8d ("io_uring: apply max_workers limit to all future users") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1b222a92f7a78a24b042763805e891a4cdd4b544.1636384034.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18btrfs: call btrfs_check_rw_degradable only if there is a missing deviceAnand Jain1-1/+2
commit 5c78a5e7aa835c4f08a7c90fe02d19f95a776f29 upstream. In open_ctree() in btrfs_check_rw_degradable() [1], we check each block group individually if at least the minimum number of devices is available for that profile. If all the devices are available, then we don't have to check degradable. [1] open_ctree() :: 3559 if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) { Also before calling btrfs_check_rw_degradable() in open_ctee() at the line number shown below [2] we call btrfs_read_chunk_tree() and down to add_missing_dev() to record number of missing devices. [2] open_ctree() :: 3454 ret = btrfs_read_chunk_tree(fs_info); btrfs_read_chunk_tree() read_one_chunk() / read_one_dev() add_missing_dev() So, check if there is any missing device before btrfs_check_rw_degradable() in open_ctree(). Also, with this the mount command could save ~16ms.[3] in the most common case, that is no device is missing. [3] 1) * 16934.96 us | btrfs_check_rw_degradable [btrfs](); CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18btrfs: fix lost error handling when replaying directory deletesFilipe Manana1-1/+3
commit 10adb1152d957a4d570ad630f93a88bb961616c1 upstream. At replay_dir_deletes(), if find_dir_range() returns an error we break out of the main while loop and then assign a value of 0 (success) to the 'ret' variable, resulting in completely ignoring that an error happened. Fix that by jumping to the 'out' label when find_dir_range() returns an error (negative value). CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18btrfs: clear MISSING device status bit in btrfs_close_one_deviceLi Zhang1-1/+3
commit 5d03dbebba2594d2e6fbf3b5dd9060c5a835de3b upstream. Reported bug: https://github.com/kdave/btrfs-progs/issues/389 There's a problem with scrub reporting aborted status but returning error code 0, on a filesystem with missing and readded device. Roughly these steps: - mkfs -d raid1 dev1 dev2 - fill with data - unmount - make dev1 disappear - mount -o degraded - copy more data - make dev1 appear again Running scrub afterwards reports that the command was aborted, but the system log message says the exit code was 0. It seems that the cause of the error is decrementing fs_devices->missing_devices but not clearing device->dev_state. Every time we umount filesystem, it would call close_ctree, And it would eventually involve btrfs_close_one_device to close the device, but it only decrements fs_devices->missing_devices but does not clear the device BTRFS_DEV_STATE_MISSING bit. Worse, this bug will cause Integer Overflow, because every time umount, fs_devices->missing_devices will decrease. If fs_devices->missing_devices value hit 0, it would overflow. With added debugging: loop1: detected capacity change from 0 to 20971520 BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 1 transid 21 /dev/loop1 scanned by systemd-udevd (2311) loop2: detected capacity change from 0 to 20971520 BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 2 transid 17 /dev/loop2 scanned by systemd-udevd (2313) BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): using free space tree BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): using free space tree BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 0 BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): using free space tree BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 18446744073709551615 BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 18446744073709551615 If fs_devices->missing_devices is 0, next time it would be 18446744073709551615 After apply this patch, the fs_devices->missing_devices seems to be right: $ truncate -s 10g test1 $ truncate -s 10g test2 $ losetup /dev/loop1 test1 $ losetup /dev/loop2 test2 $ mkfs.btrfs -draid1 -mraid1 /dev/loop1 /dev/loop2 -f $ losetup -d /dev/loop2 $ mount -o degraded /dev/loop1 /mnt/1 $ umount /mnt/1 $ mount -o degraded /dev/loop1 /mnt/1 $ umount /mnt/1 $ mount -o degraded /dev/loop1 /mnt/1 $ umount /mnt/1 $ dmesg loop1: detected capacity change from 0 to 20971520 loop2: detected capacity change from 0 to 20971520 BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 1 transid 5 /dev/loop1 scanned by mkfs.btrfs (1863) BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 2 transid 5 /dev/loop2 scanned by mkfs.btrfs (1863) BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): disk space caching is enabled BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 BTRFS info (device loop1): checking UUID tree BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): disk space caching is enabled BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): disk space caching is enabled BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Li Zhang <zhanglikernel@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18fuse: fix page stealingMiklos Szeredi1-2/+12
commit 712a951025c0667ff00b25afc360f74e639dfabe upstream. It is possible to trigger a crash by splicing anon pipe bufs to the fuse device. The reason for this is that anon_pipe_buf_release() will reuse buf->page if the refcount is 1, but that page might have already been stolen and its flags modified (e.g. PG_lru added). This happens in the unlikely case of fuse_dev_splice_write() getting around to calling pipe_buf_release() after a page has been stolen, added to the page cache and removed from the page cache. Fix by calling pipe_buf_release() right after the page was inserted into the page cache. In this case the page has an elevated refcount so any release function will know that the page isn't reusable. Reported-by: Frank Dinoff <fdinoff@google.com> Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/ Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device") Cc: <stable@vger.kernel.org> # v2.6.35 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ext4: refresh the ext4_ext_path struct after dropping i_data_sem.yangerkun1-1/+13
commit 1811bc401aa58c7bdb0df3205aa6613b49d32127 upstream. After we drop i_data sem, we need to reload the ext4_ext_path structure since the extent tree can change once i_data_sem is released. This addresses the BUG: [52117.465187] ------------[ cut here ]------------ [52117.465686] kernel BUG at fs/ext4/extents.c:1756! ... [52117.478306] Call Trace: [52117.478565] ext4_ext_shift_extents+0x3ee/0x710 [52117.479020] ext4_fallocate+0x139c/0x1b40 [52117.479405] ? __do_sys_newfstat+0x6b/0x80 [52117.479805] vfs_fallocate+0x151/0x4b0 [52117.480177] ksys_fallocate+0x4a/0xa0 [52117.480533] __x64_sys_fallocate+0x22/0x30 [52117.480930] do_syscall_64+0x35/0x80 [52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae [52117.481769] RIP: 0033:0x7fa062f855ca Cc: stable@kernel.org Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ext4: ensure enough credits in ext4_ext_shift_path_extentsyangerkun1-34/+15
commit 4268496e48dc681cfa53b92357314b5d7221e625 upstream. Like ext4_ext_rm_leaf, we can ensure that there are enough credits before every call that will consume credits. As part of this fix we fold the functionality of ext4_access_path() into ext4_ext_shift_path_extents(). This change is needed as a preparation for the next bugfix patch. Cc: stable@kernel.org Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ext4: fix lazy initialization next schedule time computation in more ↵Shaoying Xu1-5/+4
granular unit commit 39fec6889d15a658c3a3ebb06fd69d3584ddffd3 upstream. Ext4 file system has default lazy inode table initialization setup once it is mounted. However, it has issue on computing the next schedule time that makes the timeout same amount in jiffies but different real time in secs if with various HZ values. Therefore, fix by measuring the current time in a more granular unit nanoseconds and make the next schedule time independent of the HZ value. Fixes: bfff68738f1c ("ext4: add support for lazy inode table initialization") Signed-off-by: Shaoying Xu <shaoyi@amazon.com> Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Revert "ext4: enforce buffer head state assertion in ext4_da_map_blocks"Eric Whitney1-9/+6
commit 3eda41df05d6ad5c825cbc7fef03d563597b1afa upstream. This reverts commit 948ca5f30e1df0c11eb5b0f410b9ceb97fa77ad9. Two crash reports from users running variations on 5.15-rc4 kernels suggest that it is premature to enforce the state assertion in the original commit. Both crashes were triggered by BUG calls in that code, indicating that under some rare circumstance the buffer head state did not match a delayed allocated block at the time the block was written out. No reproducer is available. Resolving this problem will require more time than remains in the current release cycle, so reverting the original patch for the time being is necessary to avoid any instability it may cause. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20211012171901.5352-1-enwlinux@gmail.com Fixes: 948ca5f30e1d ("ext4: enforce buffer head state assertion in ext4_da_map_blocks") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18io-wq: remove worker to owner tw dependencyPavel Begunkov1-9/+37
commit 1d5f5ea7cb7d15b9fb1cc82673ebb054f02cd7d2 upstream. INFO: task iou-wrk-6609:6612 blocked for more than 143 seconds. Not tainted 5.15.0-rc5-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:iou-wrk-6609 state:D stack:27944 pid: 6612 ppid: 6526 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xb44/0x5960 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857 do_wait_for_common kernel/sched/completion.c:85 [inline] __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion+0x176/0x280 kernel/sched/completion.c:138 io_worker_exit fs/io-wq.c:183 [inline] io_wqe_worker+0x66d/0xc40 fs/io-wq.c:597 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 io-wq worker may submit a task_work to the master task and upon io_worker_exit() wait for the tw to get executed. The problem appears when the master task is waiting in coredump.c: 468 freezer_do_not_count(); 469 wait_for_completion(&core_state->startup); 470 freezer_count(); Apparently having some dependency on children threads getting everything stuck. Workaround it by cancelling the taks_work callback that causes it before going into io_worker_exit() waiting. p.s. probably a better option is to not submit tw elevating the refcount in the first place, but let's leave this excercise for the future. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+27d62ee6f256b186883e@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/142a716f4ed936feae868959059154362bfa8c19.1635509451.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18exfat: fix incorrect loading of i_blocks for large filesSungjong Seo1-1/+1
commit 0c336d6e33f4bedc443404c89f43c91c8bd9ee11 upstream. When calculating i_blocks, there was a mistake that was masked with a 32-bit variable. So i_blocks for files larger than 4 GiB had incorrect values. Mask with a 64-bit variable instead of 32-bit one. Fixes: 5f2aa075070c ("exfat: add inode operations") Cc: stable@vger.kernel.org # v5.7+ Reported-by: Ganapathi Kamath <hgkamath@hotmail.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ocfs2: fix data corruption on truncateJan Kara1-2/+6
commit 839b63860eb3835da165642923120d305925561d upstream. Patch series "ocfs2: Truncate data corruption fix". As further testing has shown, commit 5314454ea3f ("ocfs2: fix data corruption after conversion from inline format") didn't fix all the data corruption issues the customer started observing after 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") This time I have tracked them down to two bugs in ocfs2 truncation code. One bug (truncating page cache before clearing tail cluster and setting i_size) could cause data corruption even before 6dbf7bb55598, but before that commit it needed a race with page fault, after 6dbf7bb55598 it started to be pretty deterministic. Another bug (zeroing pages beyond old i_size) used to be harmless inefficiency before commit 6dbf7bb55598. But after commit 6dbf7bb55598 in combination with the first bug it resulted in deterministic data corruption. Although fixing only the first problem is needed to stop data corruption, I've fixed both issues to make the code more robust. This patch (of 2): ocfs2_truncate_file() did unmap invalidate page cache pages before zeroing partial tail cluster and setting i_size. Thus some pages could be left (and likely have left if the cluster zeroing happened) in the page cache beyond i_size after truncate finished letting user possibly see stale data once the file was extended again. Also the tail cluster zeroing was not guaranteed to finish before truncate finished causing possible stale data exposure. The problem started to be particularly easy to hit after commit 6dbf7bb55598 "fs: Don't invalidate page buffers in block_write_full_page()" stopped invalidation of pages beyond i_size from page writeback path. Fix these problems by unmapping and invalidating pages in the page cache after the i_size is reduced and tail cluster is zeroed out. Link: https://lkml.kernel.org/r/20211025150008.29002-1-jack@suse.cz Link: https://lkml.kernel.org/r/20211025151332.11301-1-jack@suse.cz Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12isofs: Fix out of bound access for corrupted isofs imageJan Kara1-0/+2
commit e96a1866b40570b5950cda8602c2819189c62a48 upstream. When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it. Reported-and-tested-by: syzbot+6fc7fb214625d82af7d1@syzkaller.appspotmail.com CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12btrfs: fix lzo_decompress_bio() kmap leakageLinus Torvalds1-1/+2
commit 2cf3f8133bda2a0945cc4c70e681ecb25b52b913 upstream. Commit ccaa66c8dd27 reinstated the kmap/kunmap that had been dropped in commit 8c945d32e604 ("btrfs: compression: drop kmap/kunmap from lzo"). However, it seems to have done so incorrectly due to the change not reverting cleanly, and lzo_decompress_bio() ended up not having a matching "kunmap()" to the "kmap()" that was put back. Also, any assert that the page pointer is not NULL should be before the kmap() of said pointer, since otherwise you'd just oops in the kmap() before the assert would even trigger. I noticed this when trying to verify my btrfs merge, and things not adding up. I'm doing this fixup before re-doing my merge, because this commit needs to also be backported to 5.15 (after verification from the btrfs people). Fixes: ccaa66c8dd27 ("Revert 'btrfs: compression: drop kmap/kunmap from lzo'") Cc: David Sterba <dsterba@suse.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12Revert "proc/wchan: use printk format instead of lookup_symbol_name()"Kees Cook1-8/+11
commit 54354c6a9f7fd5572d2b9ec108117c4f376d4d23 upstream. This reverts commit 152c432b128cb043fc107e8f211195fe94b2159c. When a kernel address couldn't be symbolized for /proc/$pid/wchan, it would leak the raw value, a potential information exposure. This is a regression compared to the safer pre-v5.12 behavior. Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Vito Caputo <vcaputo@pengaru.com> Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211008111626.090829198@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-29Merge tag 'for-5.15-rc7-tag' of ↵Linus Torvalds5-33/+72
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Last minute fixes for crash on 32bit architectures when compression is in use. It's a regression introduced in 5.15-rc and I'd really like not let this into the final release, fixes via stable trees would add unnecessary delay. The problem is on 32bit architectures with highmem enabled, the pages for compression may need to be kmapped, while the patches removed that as we don't use GFP_HIGHMEM allocations anymore. The pages that don't come from local allocation still may be from highmem. Despite being on 32bit there's enough such ARM machines in use so it's not a marginal issue. I did full reverts of the patches one by one instead of a huge one. There's one exception for the "lzo" revert as there was an intermediate patch touching the same code to make it compatible with subpage. I can't revert that one too, so the revert in lzo.c is manual. Qu Wenruo has worked on that with me and verified the changes" * tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: compression: drop kmap/kunmap from lzo" Revert "btrfs: compression: drop kmap/kunmap from zlib" Revert "btrfs: compression: drop kmap/kunmap from zstd" Revert "btrfs: compression: drop kmap/kunmap from generic helpers"
2021-10-29Revert "btrfs: compression: drop kmap/kunmap from lzo"David Sterba1-11/+25
This reverts commit 8c945d32e60427cbc0859cf7045bbe6196bb03d8. The kmaps in compression code are still needed and cause crashes on 32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004 with enabled LZO or ZSTD compression. The revert does not apply cleanly due to changes in a6e66e6f8c1b ("btrfs: rework lzo_decompress_bio() to make it subpage compatible") that reworked the page iteration so the revert is done to be equivalent to the original code. Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839 Tested-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-29Revert "btrfs: compression: drop kmap/kunmap from zlib"David Sterba1-11/+25
This reverts commit 696ab562e6df9fbafd6052d8ce4aafcb2ed16069. The kmaps in compression code are still needed and cause crashes on 32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004 with enabled LZO or ZSTD compression. Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839 Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-29Revert "btrfs: compression: drop kmap/kunmap from zstd"David Sterba1-9/+18
This reverts commit bbaf9715f3f5b5ff0de71da91fcc34ee9c198ed8. The kmaps in compression code are still needed and cause crashes on 32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004 with enabled LZO or ZSTD compression. Example stacktrace with ZSTD on a 32bit ARM machine: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c4159ed3 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 210 Comm: kworker/u2:3 Not tainted 5.14.0-rc79+ #12 Hardware name: Allwinner sun4i/sun5i Families Workqueue: btrfs-delalloc btrfs_work_helper PC is at mmiocpy+0x48/0x330 LR is at ZSTD_compressStream_generic+0x15c/0x28c (mmiocpy) from [<c0629648>] (ZSTD_compressStream_generic+0x15c/0x28c) (ZSTD_compressStream_generic) from [<c06297dc>] (ZSTD_compressStream+0x64/0xa0) (ZSTD_compressStream) from [<c049444c>] (zstd_compress_pages+0x170/0x488) (zstd_compress_pages) from [<c0496798>] (btrfs_compress_pages+0x124/0x12c) (btrfs_compress_pages) from [<c043c068>] (compress_file_range+0x3c0/0x834) (compress_file_range) from [<c043c4ec>] (async_cow_start+0x10/0x28) (async_cow_start) from [<c0475c3c>] (btrfs_work_helper+0x100/0x230) (btrfs_work_helper) from [<c014ef68>] (process_one_work+0x1b4/0x418) (process_one_work) from [<c014f210>] (worker_thread+0x44/0x524) (worker_thread) from [<c0156aa4>] (kthread+0x180/0x1b0) (kthread) from [<c0100150>] Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839 Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-29ocfs2: fix race between searching chunks and release journal_head from ↵Gautham Ananthakrishna1-9/+13
buffer_head Encountered a race between ocfs2_test_bg_bit_allocatable() and jbd2_journal_put_journal_head() resulting in the below vmcore. PID: 106879 TASK: ffff880244ba9c00 CPU: 2 COMMAND: "loop3" Call trace: panic oops_end no_context __bad_area_nosemaphore bad_area_nosemaphore __do_page_fault do_page_fault page_fault [exception RIP: ocfs2_block_group_find_clear_bits+316] ocfs2_block_group_find_clear_bits [ocfs2] ocfs2_cluster_group_search [ocfs2] ocfs2_search_chain [ocfs2] ocfs2_claim_suballoc_bits [ocfs2] __ocfs2_claim_clusters [ocfs2] ocfs2_claim_clusters [ocfs2] ocfs2_local_alloc_slide_window [ocfs2] ocfs2_reserve_local_alloc_bits [ocfs2] ocfs2_reserve_clusters_with_limit [ocfs2] ocfs2_reserve_clusters [ocfs2] ocfs2_lock_refcount_allocators [ocfs2] ocfs2_make_clusters_writable [ocfs2] ocfs2_replace_cow [ocfs2] ocfs2_refcount_cow [ocfs2] ocfs2_file_write_iter [ocfs2] lo_rw_aio loop_queue_work kthread_worker_fn kthread ret_from_fork When ocfs2_test_bg_bit_allocatable() called bh2jh(bg_bh), the bg_bh->b_private NULL as jbd2_journal_put_journal_head() raced and released the jounal head from the buffer head. Needed to take bit lock for the bit 'BH_JournalHead' to fix this race. Link: https://lkml.kernel.org/r/1634820718-6043-1-git-send-email-gautham.ananthakrishna@oracle.com Signed-off-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: <rajesh.sivaramasubramaniom@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-27Revert "btrfs: compression: drop kmap/kunmap from generic helpers"David Sterba2-2/+4
This reverts commit 4c2bf276b56d8d27ddbafcdf056ef3fc60ae50b0. The kmaps in compression code are still needed and cause crashes on 32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004 with enabled LZO or ZSTD compression. Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839 Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-24Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull autofs fix from Al Viro: "Fix for a braino of mine (in getting rid of open-coded dentry_path_raw() in autofs a couple of cycles ago). Mea culpa... Obvious -stable fodder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: autofs: fix wait name hash calculation in autofs_wait()
2021-10-24Merge tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds14-153/+306
Pull ksmbd fixes from Steve French: "Ten fixes for the ksmbd kernel server, for improved security and additional buffer overflow checks: - a security improvement to session establishment to reduce the possibility of dictionary attacks - fix to ensure that maximum i/o size negotiated in the protocol is not less than 64K and not more than 8MB to better match expected behavior - fix for crediting (flow control) important to properly verify that sufficient credits are available for the requested operation - seven additional buffer overflow, buffer validation checks" * tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add buffer validation in session setup ksmbd: throttle session setup failures to avoid dictionary attacks ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests ksmbd: validate credit charge after validating SMB2 PDU body size ksmbd: add buffer validation for smb direct ksmbd: limit read/write/trans buffer size not to exceed 8MB ksmbd: validate compound response buffer ksmbd: fix potencial 32bit overflow from data area check in smb2_write ksmbd: improve credits management ksmbd: add validation in smb2_ioctl
2021-10-23Merge tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds2-14/+47
Pull io_uring fixes from Jens Axboe: "Two fixes for the max workers limit API that was introduced this series: one fix for an issue with that code, and one fixing a linked timeout regression in this series" * tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block: io_uring: apply worker limits to previous users io_uring: fix ltimeout unprep io_uring: apply max_workers limit to all future users io-wq: max_worker fixes
2021-10-22Merge tag 'fuse-fixes-5.15-rc7' of ↵Linus Torvalds3-56/+46
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Syzbot discovered a race in case of reusing the fuse sb (introduced in this cycle). Fix it by doing the s_fs_info initialization at the proper place" * tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: clean up error exits in fuse_fill_super() fuse: always initialize sb->s_fs_info fuse: clean up fuse_mount destruction fuse: get rid of fuse_put_super() fuse: check s_root when destroying sb
2021-10-21io_uring: apply worker limits to previous usersPavel Begunkov1-0/+18
Another change to the API io-wq worker limitation API added in 5.15, apply the limit to all prior users that already registered a tctx. It may be confusing as it's now, in particular the change covers the following 2 cases: TASK1 | TASK2 _________________________________________________ ring = create() | | limit_iowq_workers() *not limited* | TASK1 | TASK2 _________________________________________________ ring = create() | | issue_requests() limit_iowq_workers() | | *not limited* A note on locking, it's safe to traverse ->tctx_list as we hold ->uring_lock, but do that after dropping sqd->lock to avoid possible problems. It's also safe to access tctx->io_wq there because tasks kill it only after removing themselves from tctx_list, see io_uring_cancel_generic() -> io_uring_clean_tctx() Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com Reviewed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21fuse: clean up error exits in fuse_fill_super()Miklos Szeredi1-6/+2
Instead of "goto err", return error directly, since there's no error cleanup to do now. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 02:33:09 +0300