summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2011-03-23Remove pointless memset in nfsacl_encode()Jesper Juhl1-1/+0
Remove pointless memset() in nfsacl_encode(). Thanks to Trond Myklebust <Trond.Myklebust@netapp.com> for pointing out that it is not needed since posix_acl_init() will set everything regardless.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23nfs4: Fix NULL dereference at d_alloc_and_lookup()Gusev Vitaliy1-0/+4
d_alloc_and_lookup() calls i_op->lookup method due to rootfh changes his fsid. During mount i_op of NFS root inode is set to nfs_mountpoint_inode_operations, if rpc_ops->getroot() and rpc_ops->getattr() return different fsid. After that nfs_follow_remote_path() raised oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) stack trace: d_alloc_and_lookup+0x4c/0x74 do_lookup+0x1e3/0x280 link_path_walk+0x12e/0xab0 nfs4_remote_get_sb+0x56/0x2c0 [nfs] path_walk+0x67/0xe0 vfs_path_lookup+0x8e/0x100 nfs_follow_remote_path+0x16f/0x3e0 [nfs] nfs4_try_mount+0x6f/0xd0 [nfs] nfs_get_sb+0x269/0x400 [nfs] vfs_kern_mount+0x8a/0x1f0 do_kern_mount+0x52/0x130 do_mount+0x20a/0x260 sys_mount+0x90/0xe0 system_call_fastpath+0x16/0x1b So just refresh fsid, as RFC3530 doesn't specify behavior in case of rootfh changes fsid. Signed-off-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-22NFS: Fix a hang/infinite loop in nfs_wb_page()Trond Myklebust1-12/+19
When one of the two waits in nfs_commit_inode() is interrupted, it returns a non-negative value, which causes nfs_wb_page() to think that the operation was successful causing it to busy-loop rather than exiting. It also causes nfs_file_fsync() to incorrectly report the file as being successfully committed to disk. This patch fixes both problems by ensuring that we return an error if the attempts to wait fail. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2011-03-22FS: Use stable writes when not doing a bulk flushTrond Myklebust2-3/+16
If we're only doing a single write, and there are no other unstable writes being queued up, we might want to just flip to using a stable write RPC call. Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-15nfs: BKL is no longer needed, so remove the includeStephen Rothwell1-1/+0
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11Cleanup: Factor out some cut-and-paste code.Rob Landley1-111/+44
Factor out some cut-and-paste code in options parsing. Saves about 800 bytes on x86-64. Signed-off-by: Rob Landley <rlandley@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.Rob Landley1-96/+33
Eliminate two mostly duplicate functions (nfs_parse_simple_hostname() and nfs_parse_protected_hostname()) and instead just make the calling function (nfs_parse_devname()) do everything. Signed-off-by: Rob Landley <rlandley@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFS: account direct-io into task io accountingKonstantin Khlebnikov1-0/+5
Account NFS direct-io reads and writes into Task I/O Accounting. Do it before complition to handle aio. NFS have unusual direct-io implementation, thus accounting in generic code does not work. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Send unmapped uid/gids to the server when using auth_sysTrond Myklebust3-9/+46
The new behaviour is enabled using the new module parameter 'nfs4_disable_idmapping'. Note that if the server rejects an unmapped uid or gid, then the client will automatically switch back to using the idmapper. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattrTrond Myklebust2-2/+3
This will be required in order to switch uid/gid mapping back on if the admin has tried to disable it. Note that we also propagate NFS4ERR_BADNAME at the same time, in order to work around a Linux server bug. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: cleanup idmapper functions to take an nfs_server argumentTrond Myklebust2-22/+20
...instead of the nfs_client. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Send unmapped uid/gids to the server if the idmapper failsTrond Myklebust1-4/+26
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: If the server sends us a numeric uid/gid then accept itTrond Myklebust1-2/+26
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: reject zero layout with zeroed stripe unitBenny Halevy1-2/+2
Allowing stripe_unit==0 causes the client to crash later on when dividing by zero. Reported-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: Clear lseg pointer in ->doio functionFred Isaman3-1/+4
Now that we have access to the pointer, clear it immediately after the put, instead of in caller. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: rearrange ->doio argsFred Isaman3-37/+43
This will make it possible to clear the lseg pointer in the same function as it is put, instead of in the caller nfs_pageio_doio(). Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: pnfs filelayout driver writeFred Isaman4-2/+126
Allows the pnfs filelayout driver to write to the data servers. Note that COMMIT to data servers will be implemented in a future patch. To avoid improper behavior, for the moment any WRITE to a data server that would also require a COMMIT to the data server is sent NFS_FILE_SYNC. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: remove GETATTR from ds writesFred Isaman2-4/+10
Any WRITE compound directed to a data server needs to have the GETATTR calls suppressed. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: implement generic pnfs layer write switchAndy Adamson4-0/+45
Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: trigger LAYOUTGET for writesFred Isaman3-12/+49
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: Send lseg down into nfs_write_rpcsetupFred Isaman1-2/+5
We grab the lseg sent in from the doio function and attach it to each struct nfs_write_data created. This is how the lseg will be sent to the layout driver. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: add callback to nfs4_write_doneFred Isaman1-4/+10
Add callback that pnfs layout driver can use to do its own handling of data server WRITE response. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: rearrange nfs_write_rpcsetupAndy Adamson1-36/+46
Reorder nfs_write_rpcsetup, preparing for a pnfs entry point. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: turn off pNFS on ds connection failureAndy Adamson4-9/+36
If a data server is unavailable, go through MDS. Mark the deviceid containing the data server as a negative cache entry. Do not try to connect to any data server on a deviceid marked as a negative cache entry. Mark any layout that tries to use the marked deviceid as failed. Inodes with a layout marked as fails will not use the layout for I/O, and will not perform any more layoutgets. Inodes without a layout will still do layoutget, but the layout will get marked immediately. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1 move deviceid cache to filelayout driverChristoph Hellwig5-263/+92
No need for generic cache with only one user. Keep a simple hash of deviceids in the filelayout driver. Signed-off-by: Christoph Hellwig <hch@infradead.org> Acked-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: filelayout async error handlerAndy Adamson5-6/+113
Use our own async error handler. Mark the layout as failed and retry i/o through the MDS on specified errors. Update the mds_offset in nfs_readpage_retry so that a failed short-read retry to a DS gets correctly resent through the MDS. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: filelayout readAndy Adamson5-2/+91
Attempt a pNFS file layout read by setting up the nfs_read_data struct and calling nfs_initiate_read with the data server rpc client and the filelayout rpc call ops. Error handling is implemented in a subsequent patch. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Tested-by: Guo Mingyang <guomingyang@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: filelayout i/o helpersFred Isaman3-0/+108
Prepare for filelayout_read_pagelist with helper functions that find the correct data server, filehandle, and offset. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Tigran Mkrtchyan <tigran@anahit.desy.de> Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: data server connectionAndy Adamson5-2/+146
Introduce a data server set_client and init session following the nfs4_set_client and nfs4_init_session convention. Once a new nfs_client is on the nfs_client_list, the nfs_client cl_cons_state serializes access to creating an nfs_client struct with matching properties. Use the new nfs_get_client() that initializes new clients. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: generic readAndy Adamson3-25/+88
Separate the rpc run portion of nfs_read_rpcsetup into a new function nfs_initiate_read that is called for normal NFS I/O. Add a pNFS read_pagelist function that is called instead of nfs_intitate_read for pNFS reads. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: shift pnfs_update_layout locationsFred Isaman6-35/+48
Move the pnfs_update_layout call location to nfs_pageio_do_add_request(). Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach it to each nfs_read_data so it can be sent to the layout driver. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: coelesce across layout stripesFred Isaman6-2/+68
Add a pg_test layout driver hook which is used to avoid coelescing I/O across layout stripes. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: lseg refcountingFred Isaman2-23/+59
Prepare put_lseg and get_lseg to be called from the pNFS I/O code. Pull common code from pnfs_lseg_locked to call from pnfs_lseg. Inline pnfs_lseg_locked into it's only caller. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: add MDS mount DS only checkAndy Adamson2-0/+17
The DS only role cannot be used to mount. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: new flag for lease time checkAndy Adamson2-0/+14
Data servers cannot send nfs4_proc_get_lease_time. but still need to setup state renewal. Add the NFS_CS_CHECK_LEASE_TIME bit to indicate if the lease time can be checked. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: new flag for state renewal checkAndy Adamson2-5/+6
Data servers not sharing a session with the mount MDS always have an empty cl_superblocks list. Replace the cl_superblocks empty list check to see if it is time to shut down renewd with the NFS_CS_STOP_RENEW bit which is not set by such a data server. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: send zero stateid seqid on v4.1 i/oAndy Adamson1-3/+7
Data servers require a zero stateid seqid, and there is no advantage to not doing the same for all NFSv4.1 Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFS move nfs_client initialization into nfs_get_clientAndy Adamson5-26/+42
Now nfs_get_client returns an nfs_client ready to be used no matter if it was found or created. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: put_layout_hdr can remove nfsi->layoutAndy Adamson1-1/+1
Prevents an Oops triggered by CB_LAYOUTRECALL and LAYOUTGET race on a pnfs_layout_hdr first pnfs_layout_segment. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFS: change nfs_writeback_done to return voidFred Isaman1-4/+4
The return values are not used by any callers. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFS: remove pointless if statement in nfs_direct_write_resultFred Isaman1-2/+1
The code was doing nothing more in either branch of the if. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11pnfs: fix pnfs lock inversion of i_lock and cl_lockFred Isaman2-18/+26
The pnfs code was using throughout the lock order i_lock, cl_lock. This conflicts with the nfs delegation code. Rework the pnfs code to avoid taking both locks simultaneously. Currently the code takes the double lock to add/remove the layout to a nfs_client list, while atomically checking that the list of lsegs is empty. To avoid this, we rely on existing serializations. When a layout is initialized with lseg count equal zero, LAYOUTGET's openstateid serialization is in effect, making it safe to assume it stays zero unless we change it. And once a layout's lseg count drops to zero, it is set as DESTROYED and so will stay at zero. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11pnfs: do not need to clear NFS_LAYOUT_BULK_RECALL flagFred Isaman1-2/+0
We do not need to clear the NFS_LAYOUT_BULK_RECALL, as setting it guarantees that NFS_LAYOUT_DESTROYED will be set once any outstanding io is finished. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11pnfs: avoid incorrect use of layout stateidFred Isaman1-3/+10
The code could violate the following from RFC5661, section 12.5.3: "Once a client has no more layouts on a file, the layout stateid is no longer valid and MUST NOT be used." This can occur when a layout already has a lseg, starts another non-everlapping LAYOUTGET, and a CB_LAYOUTRECALL for the existing lseg is processed before we hit pnfs_layout_process(). Solve by setting, each time the client has no more lsegs for a file, a flag which blocks further use of the layout and triggers its removal. This also fixes a second bug which occurs in the same instance as above. If we actually use pnfs_layout_process, we add the new lseg to the layout, but the layout has been removed from the nfs_client list by the intervening CB_LAYOUTRECALL and will not be added back. Thus the newly acquired lseg will not be properly returned in the event of a subsequent CB_LAYOUTRECALL. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFS: NFSROOT should default to "proto=udp"Chuck Lever1-15/+14
There have been a number of recent reports that NFSROOT is no longer working with default mount options, but fails only with certain NICs. Brian Downing <bdowning@lavos.net> bisected to commit 56463e50 "NFS: Use super.c for NFSROOT mount option parsing". Among other things, this commit changes the default mount options for NFSROOT to use TCP instead of UDP as the underlying transport. TCP seems less able to deal with NICs that are slow to initialize. The system logs that have accompanied reports of problems all show that NFSROOT attempts to establish a TCP connection before the NIC is fully initialized, and thus the TCP connection attempt fails. When a TCP connection attempt fails during a mount operation, the NFS stack needs to fail the operation. Usually user space knows how and when to retry it. The network layer does not report a distinct error code for this particular failure mode. Thus, there isn't a clean way for the RPC client to see that it needs to retry in this case, but not in others. Because NFSROOT is used in some environments where it is not possible to update the kernel command line to specify "udp", the proper thing to do is change NFSROOT to use UDP by default, as it did before commit 56463e50. To make it easier to see how to change default mount options for NFSROOT and to distinguish default settings from mandatory settings, I've adjusted a couple of areas to document the specifics. root_nfs_cat() is also modified to deal with commas properly when concatenating strings containing mount option lists. This keeps root_nfs_cat() call sites simpler, now that we may be concatenating multiple mount option strings. Tested-by: Brian Downing <bdowning@lavos.net> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@kernel.org> # 2.6.37 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11nfs4: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in fs/nfs/nfs4proc.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: nfs4_state_mark_reclaim_nograce() should be staticTrond Myklebust2-4/+2
There are no more external users of nfs4_state_mark_reclaim_nograce() or nfs4_state_mark_reclaim_reboot(), so mark them as static. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Fix the setlk error handlerTrond Myklebust1-9/+4
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: Fix the handling of the SEQUENCE status bitsTrond Myklebust1-3/+8
We want SEQUENCE status bits to be handled by the state manager in order to avoid threading issues. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4/4.1: Fix nfs4_schedule_state_recovery abusesTrond Myklebust3-29/+49
nfs4_schedule_state_recovery() should only be used when we need to force the state manager to check the lease. If we just want to start the state manager in order to handle a state recovery situation, we should be using nfs4_schedule_state_manager(). This patch fixes the abuses of nfs4_schedule_state_recovery() by replacing its use with a set of helper functions that do the right thing. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 12:15:42 +0300