| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 474c4f306eefbb21b67ebd1de802d005c7d7ecdc upstream.
If CONFIG_SWAP=n, it does not make much sense to offer the user the
option to enable support for swapping over NFS, as that will still fail
at run time:
# swapon /swap
swapon: /swap: swapon failed: Function not implemented
Fix this by adding a dependency on CONFIG_SWAP.
Fixes: a564b8f0398636ba ("nfs: enable swap on NFS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0dd940e582b6a60296b9847a54012a4b080dc72 upstream.
RHBZ: 1579050
If we have a soft mount we should fail commands for session-setup
failures (such as the password having changed/ account being deleted/ ...)
and return an error back to the application.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4e19443da1941050b346f8fc4c368aa68413bc88 ]
Sometimes when running generic/475 we would trip the
WARN_ON(cache->reserved) check when free'ing the block groups on umount.
This is because sometimes we don't commit the transaction because of IO
errors and thus do not cleanup the tree logs until at umount time.
These blocks are still reserved until they are cleaned up, but they
aren't cleaned up until _after_ we do the free block groups work. Fix
this by moving the free after free'ing the fs roots, that way all of the
tree logs are cleaned up and we have a properly cleaned fs. A bunch of
loops of generic/475 confirmed this fixes the problem.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4273eaff9b8d5e141113a5bdf9628c02acf3afe5 ]
We don't need int argument bool shall do in free_root_pointers(). And
rename the argument as it confused two people.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ff90bdfb206e49c8b418811efbdd0c77380fa8c2 upstream.
The c->sup_node is allocated in function ubifs_read_sb_node but
is not freed. This will cause memory leak as below:
unreferenced object 0xbc9ce000 (size 4096):
comm "mount", pid 500, jiffies 4294952946 (age 315.820s)
hex dump (first 32 bytes):
31 18 10 06 06 7b f1 11 02 00 00 00 00 00 00 00 1....{..........
00 10 00 00 06 00 00 00 00 00 00 00 08 00 00 00 ................
backtrace:
[<d1c503cd>] ubifs_read_superblock+0x48/0xebc
[<a20e14bd>] ubifs_mount+0x974/0x1420
[<8589ecc3>] legacy_get_tree+0x2c/0x50
[<5f1fb889>] vfs_get_tree+0x28/0xfc
[<bbfc7939>] do_mount+0x4f8/0x748
[<4151f538>] ksys_mount+0x78/0xa0
[<d59910a9>] ret_fast_syscall+0x0/0x54
[<1cc40005>] 0x7ea02790
Free it in ubifs_umount and in the error path of mount_ubifs.
Fixes: fd6150051bec ("ubifs: Store read superblock node")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 09a80f2aef06b7c86143f5c14efd3485e0d2c139 upstream.
We must allow for the fact that iov_iter_write() could have returned
a short write (e.g. if there was an ENOSPC issue).
Fixes: d890be159a71 "nfsd: Add I/O trace points in the NFSv4 write path"
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9594497f2c78993cb66b696122f7c65528ace985 upstream.
The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies,
but then compared to a CLOCK_REALTIME timestamp later on, which makes
no sense.
For consistency with the other timestamps, change this to use a time_t.
This is a change in behavior, which may cause regressions, but the
current code is not sensible. On a system with CONFIG_HZ=1000,
the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))'
check is false for roughly the first 18 days of uptime and then true
for the next 49 days.
Fixes: 7919d0a27f1e ("nfsd: add a LRU list for blocked locks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2561c92b12f4f4e386d453556685f75775c0938b upstream.
The nfsd4_cb_layout_done() function takes a 'time_t' value,
multiplied by NSEC_PER_SEC*2 to get a nanosecond value.
This works fine on 64-bit architectures, but on 32-bit, any
value over 1 second results in a signed integer overflow
with unexpected results.
Cast one input to a 64-bit type in order to produce the
same result that we have on 64-bit architectures, regarless
of the type of nfsd4_lease.
Fixes: 6b9b21073d3b ("nfsd: give up on CB_LAYOUTRECALLs after two lease periods")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9e9866803f7b6c3fdd35d345e97fb0b2908bbbc upstream.
Clang warns:
../fs/ext2/super.c:1076:3: warning: misleading indentation; statement is
not part of the previous 'if' [-Wmisleading-indentation]
sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
^
../fs/ext2/super.c:1074:2: note: previous statement is here
if (EXT2_BLOCKS_PER_GROUP(sb) == 0)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes: 41f04d852e35 ("[PATCH] ext2: fix mounts at 16T")
Link: https://github.com/ClangBuiltLinux/linux/issues/827
Link: https://lore.kernel.org/r/20191218031930.31393-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f658adeea45e430a24c7a157c3d5448925ac2038 upstream.
fuse_direct_io() can end up advancing the iterator by more than the amount
of data read or written. This case is handled by the generic code if going
through ->direct_IO(), but not in the FOPEN_DIRECT_IO case.
Fix by reverting the extra bytes from the iterator in case of error or a
short count.
To test: install lxcfs, then the following testcase
int fd = open("/var/lib/lxcfs/proc/uptime", O_RDONLY);
sendfile(1, fd, NULL, 16777216);
sendfile(1, fd, NULL, 16777216);
will spew WARN_ON() in iov_iter_pipe().
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 3c3db095b68c ("fuse: use iov_iter based generic splice helpers")
Cc: <stable@vger.kernel.org> # v5.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d797e9ff95ecbcf0a83d657928ed20579444857 upstream.
Writing a cloned file triggers a kernel oops and the user-space command
process is also killed by the system. The bug can be reproduced stably
via:
1) create a file under ocfs2 file system directory.
journalctl -b > aa.txt
2) create a cloned file for this file.
reflink aa.txt bb.txt
3) write the cloned file with dd command.
dd if=/dev/zero of=bb.txt bs=512 count=1 conv=notrunc
The dd command is killed by the kernel, then you can see the oops message
via dmesg command.
[ 463.875404] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 463.875413] #PF: supervisor read access in kernel mode
[ 463.875416] #PF: error_code(0x0000) - not-present page
[ 463.875418] PGD 0 P4D 0
[ 463.875425] Oops: 0000 [#1] SMP PTI
[ 463.875431] CPU: 1 PID: 2291 Comm: dd Tainted: G OE 5.3.16-2-default
[ 463.875433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[ 463.875500] RIP: 0010:ocfs2_refcount_cow+0xa4/0x5d0 [ocfs2]
[ 463.875505] Code: 06 89 6c 24 38 89 eb f6 44 24 3c 02 74 be 49 8b 47 28
[ 463.875508] RSP: 0018:ffffa2cb409dfce8 EFLAGS: 00010202
[ 463.875512] RAX: ffff8b1ebdca8000 RBX: 0000000000000001 RCX: ffff8b1eb73a9df0
[ 463.875515] RDX: 0000000000056a01 RSI: 0000000000000000 RDI: 0000000000000000
[ 463.875517] RBP: 0000000000000001 R08: ffff8b1eb73a9de0 R09: 0000000000000000
[ 463.875520] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 463.875522] R13: ffff8b1eb922f048 R14: 0000000000000000 R15: ffff8b1eb922f048
[ 463.875526] FS: 00007f8f44d15540(0000) GS:ffff8b1ebeb00000(0000) knlGS:0000000000000000
[ 463.875529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 463.875532] CR2: 0000000000000028 CR3: 000000003c17a000 CR4: 00000000000006e0
[ 463.875546] Call Trace:
[ 463.875596] ? ocfs2_inode_lock_full_nested+0x18b/0x960 [ocfs2]
[ 463.875648] ocfs2_file_write_iter+0xaf8/0xc70 [ocfs2]
[ 463.875672] new_sync_write+0x12d/0x1d0
[ 463.875688] vfs_write+0xad/0x1a0
[ 463.875697] ksys_write+0xa1/0xe0
[ 463.875710] do_syscall_64+0x60/0x1f0
[ 463.875743] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 463.875758] RIP: 0033:0x7f8f4482ed44
[ 463.875762] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00
[ 463.875765] RSP: 002b:00007fff300a79d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 463.875769] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8f4482ed44
[ 463.875771] RDX: 0000000000000200 RSI: 000055f771b5c000 RDI: 0000000000000001
[ 463.875774] RBP: 0000000000000200 R08: 00007f8f44af9c78 R09: 0000000000000003
[ 463.875776] R10: 000000000000089f R11: 0000000000000246 R12: 000055f771b5c000
[ 463.875779] R13: 0000000000000200 R14: 0000000000000000 R15: 000055f771b5c000
This regression problem was introduced by commit e74540b28556 ("ocfs2:
protect extent tree in ocfs2_prepare_inode_for_write()").
Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com
Fixes: e74540b28556 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()").
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 01d7a356872eec22ef34a33a5f9cfa917d145468 upstream.
If we have nested or circular eventfd wakeups, then we can deadlock if
we run them inline from our poll waitqueue wakeup handler. It's also
possible to have very long chains of notifications, to the extent where
we could risk blowing the stack.
Check the eventfd recursion count before calling eventfd_signal(). If
it's non-zero, then punt the signaling to async context. This is always
safe, as it takes us out-of-line in terms of stack and locking context.
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5e683d5cab8cd433b06ae178621f083cabd4f63 upstream.
eventfd use cases from aio and io_uring can deadlock due to circular
or resursive calling, when eventfd_signal() tries to grab the waitqueue
lock. On top of that, it's also possible to construct notification
chains that are deep enough that we could blow the stack.
Add a percpu counter that tracks the percpu recursion depth, warn if we
exceed it. The counter is also exposed so that users of eventfd_signal()
can do the right thing if it's non-zero in the context where it is
called.
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e5e41e2dc4e4413296d5a4af54ac92d7cd52317 upstream.
In gfs2_file_write_iter, for direct writes, the error checking in the buffered
write fallback case is incomplete. This can cause inode write errors to go
undetected. Fix and clean up gfs2_file_write_iter along the way.
Based on a proposed fix by Christoph Hellwig <hch@lst.de>.
Fixes: 967bcc91b044 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c0e8dda608a51855225c611b5c6b442f95fbc56 upstream.
Set current->backing_dev_info just around the buffered write calls to
prepare for the next fix.
Fixes: 967bcc91b044 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7582026f6f3588ecebd281965c8a71aff6fb6158 upstream.
When the first log header in a journal happens to have a sequence
number of 0, a bug in gfs2_find_jhead() causes it to prematurely exit,
and return an uninitialized jhead with seq 0. This can cause failures
in the caller. For instance, a mount fails in one test case.
The correct behavior is for it to continue searching through the journal
to find the correct journal head with the highest sequence number.
Fixes: f4686c26ecc3 ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5750c37523a2c8cbb450b9ef31e21c2ba876b05e upstream.
Raviu reported that running his regular fs_trim segfaulted with the
following backtrace:
[ 237.525947] assertion failed: prev, in ../fs/btrfs/extent_io.c:1595
[ 237.525984] ------------[ cut here ]------------
[ 237.525985] kernel BUG at ../fs/btrfs/ctree.h:3117!
[ 237.525992] invalid opcode: 0000 [#1] SMP PTI
[ 237.525998] CPU: 4 PID: 4423 Comm: fstrim Tainted: G U OE 5.4.14-8-vanilla #1
[ 237.526001] Hardware name: ASUSTeK COMPUTER INC.
[ 237.526044] RIP: 0010:assfail.constprop.58+0x18/0x1a [btrfs]
[ 237.526079] Call Trace:
[ 237.526120] find_first_clear_extent_bit+0x13d/0x150 [btrfs]
[ 237.526148] btrfs_trim_fs+0x211/0x3f0 [btrfs]
[ 237.526184] btrfs_ioctl_fitrim+0x103/0x170 [btrfs]
[ 237.526219] btrfs_ioctl+0x129a/0x2ed0 [btrfs]
[ 237.526227] ? filemap_map_pages+0x190/0x3d0
[ 237.526232] ? do_filp_open+0xaf/0x110
[ 237.526238] ? _copy_to_user+0x22/0x30
[ 237.526242] ? cp_new_stat+0x150/0x180
[ 237.526247] ? do_vfs_ioctl+0xa4/0x640
[ 237.526278] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[ 237.526283] do_vfs_ioctl+0xa4/0x640
[ 237.526288] ? __do_sys_newfstat+0x3c/0x60
[ 237.526292] ksys_ioctl+0x70/0x80
[ 237.526297] __x64_sys_ioctl+0x16/0x20
[ 237.526303] do_syscall_64+0x5a/0x1c0
[ 237.526310] entry_SYSCALL_64_after_hwframe+0x49/0xbe
That was due to btrfs_fs_device::aloc_tree being empty. Initially I
thought this wasn't possible and as a percaution have put the assert in
find_first_clear_extent_bit. Turns out this is indeed possible and could
happen when a file system with SINGLE data/metadata profile has a 2nd
device added. Until balance is run or a new chunk is allocated on this
device it will be completely empty.
In this case find_first_clear_extent_bit should return the full range
[0, -1ULL] and let the caller handle this i.e for trim the end will be
capped at the size of actual device.
Link: https://lore.kernel.org/linux-btrfs/izW2WNyvy1dEDweBICizKnd2KDwDiDyY2EYQr4YCwk7pkuIpthx-JRn65MPBde00ND6V0_Lh8mW0kZwzDiLDv25pUYWxkskWNJnVP0kgdMA=@protonmail.com/
Fixes: 45bfcfc168f8 ("btrfs: Implement find_first_clear_extent_bit")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42ffb0bf584ae5b6b38f72259af1e0ee417ac77f upstream.
There exists a deadlock with range_cyclic that has existed forever. If
we loop around with a bio already built we could deadlock with a writer
who has the page locked that we're attempting to write but is waiting on
a page in our bio to be written out. The task traces are as follows
PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5"
#0 [ffffc900297bb658] __schedule at ffffffff81a4c33f
#1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3
#2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42
#3 [ffffc900297bb708] __lock_page at ffffffff811f145b
#4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502
#5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684
#6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff
#7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0
#8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2
#9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd
PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND:
"aio-dio-invalid"
#0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f
#1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3
#2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42
#3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6
#4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7
#5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359
#6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933
#7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8
#8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d
#9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032
I used drgn to find the respective pages we were stuck on
page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901
page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874
As you can see the kworker is waiting for bit 0 (PG_locked) on index
7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index
8148. aio-dio-invalid has 7680, and the kworker epd looks like the
following
crash> struct extent_page_data ffffc900297bbbb0
struct extent_page_data {
bio = 0xffff889f747ed830,
tree = 0xffff889eed6ba448,
extent_locked = 0,
sync_io = 0
}
Probably worth mentioning as well that it waits for writeback of the
page to complete while holding a lock on it (at prepare_pages()).
Using drgn I walked the bio pages looking for page
0xffffea00fbfc7500 which is the one we're waiting for writeback on
bio = Object(prog, 'struct bio', address=0xffff889f747ed830)
for i in range(0, bio.bi_vcnt.value_()):
bv = bio.bi_io_vec[i]
if bv.bv_page.value_() == 0xffffea00fbfc7500:
print("FOUND IT")
which validated what I suspected.
The fix for this is simple, flush the epd before we loop back around to
the beginning of the file during writeout.
Fixes: b293f02e1423 ("Btrfs: Add writepages support")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7227ff4de55d931bbdc156c8ef0ce4f100c78a5b upstream.
There is a race between adding and removing elements to the tree mod log
list and rbtree that can lead to use-after-free problems.
Consider the following example that explains how/why the problems happens:
1) Task A has mod log element with sequence number 200. It currently is
the only element in the mod log list;
2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to
access the tree mod log. When it enters the function, it initializes
'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock'
before checking if there are other elements in the mod seq list.
Since the list it empty, 'min_seq' remains set to (u64)-1. Then it
unlocks the lock 'tree_mod_seq_lock';
3) Before task A acquires the lock 'tree_mod_log_lock', task B adds
itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a
sequence number of 201;
4) Some other task, name it task C, modifies a btree and because there
elements in the mod seq list, it adds a tree mod elem to the tree
mod log rbtree. That node added to the mod log rbtree is assigned
a sequence number of 202;
5) Task B, which is doing fiemap and resolving indirect back references,
calls btrfs get_old_root(), with 'time_seq' == 201, which in turn
calls tree_mod_log_search() - the search returns the mod log node
from the rbtree with sequence number 202, created by task C;
6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating
the mod log rbtree and finds the node with sequence number 202. Since
202 is less than the previously computed 'min_seq', (u64)-1, it
removes the node and frees it;
7) Task B still has a pointer to the node with sequence number 202, and
it dereferences the pointer itself and through the call to
__tree_mod_log_rewind(), resulting in a use-after-free problem.
This issue can be triggered sporadically with the test case generic/561
from fstests, and it happens more frequently with a higher number of
duperemove processes. When it happens to me, it either freezes the VM or
it produces a trace like the following before crashing:
[ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1
[ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 1245.321287] RIP: 0010:rb_next+0x16/0x50
[ 1245.321307] Code: ....
[ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202
[ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b
[ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80
[ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000
[ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038
[ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8
[ 1245.321539] FS: 00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000
[ 1245.321591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0
[ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1245.321706] Call Trace:
[ 1245.321798] __tree_mod_log_rewind+0xbf/0x280 [btrfs]
[ 1245.321841] btrfs_search_old_slot+0x105/0xd00 [btrfs]
[ 1245.321877] resolve_indirect_refs+0x1eb/0xc60 [btrfs]
[ 1245.321912] find_parent_nodes+0x3dc/0x11b0 [btrfs]
[ 1245.321947] btrfs_check_shared+0x115/0x1c0 [btrfs]
[ 1245.321980] ? extent_fiemap+0x59d/0x6d0 [btrfs]
[ 1245.322029] extent_fiemap+0x59d/0x6d0 [btrfs]
[ 1245.322066] do_vfs_ioctl+0x45a/0x750
[ 1245.322081] ksys_ioctl+0x70/0x80
[ 1245.322092] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1245.322113] __x64_sys_ioctl+0x16/0x20
[ 1245.322126] do_syscall_64+0x5c/0x280
[ 1245.322139] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1245.322155] RIP: 0033:0x7fdee3942dd7
[ 1245.322177] Code: ....
[ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7
[ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004
[ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44
[ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48
[ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50
[ 1245.322423] Modules linked in: ....
[ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]---
Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum
sequence number and iterates the rbtree while holding the lock
'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock'
lock, since it is now redundant.
Fixes: bd989ba359f2ac ("Btrfs: add tree modification log functions")
Fixes: 097b8a7c9e48e2 ("Btrfs: join tree mod log code with the code holding back delayed refs")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 889bfa39086e86b52fcfaa04d72c95eaeb12f9a5 upstream.
If we fsync on a subvolume and create a log root for that volume, and
then later delete that subvolume we'll never clean up its log root. Fix
this by making switch_commit_roots free the log for any dropped roots we
encounter. The extra churn is because we need a btrfs_trans_handle, not
the btrfs_transaction.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d62b23c94952e78211a383b7d90ef0afbd9a3717 upstream.
If we abort a transaction we have the following sequence
if (!trans->dirty && list_empty(&trans->new_bgs))
return;
WRITE_ONCE(trans->transaction->aborted, err);
The idea being if we didn't modify anything with our trans handle then
we don't really need to abort the whole transaction, maybe the other
trans handles are fine and we can carry on.
However in the case of create_snapshot we add a pending_snapshot object
to our transaction and then commit the transaction. We don't actually
modify anything. sync() behaves the same way, attach to an existing
transaction and commit it. This means that if we have an IO error in
the right places we could abort the committing transaction with our
trans->dirty being not set and thus not set transaction->aborted.
This is a problem because in the create_snapshot() case we depend on
pending->error being set to something, or btrfs_commit_transaction
returning an error.
If we are not the trans handle that gets to commit the transaction, and
we're waiting on the commit to happen we get our return value from
cur_trans->aborted. If this was not set to anything because sync() hit
an error in the transaction commit before it could modify anything then
cur_trans->aborted would be 0. Thus we'd return 0 from
btrfs_commit_transaction() in create_snapshot.
This is a problem because we then try to do things with
pending_snapshot->snap, which will be NULL because we didn't create the
snapshot, and then we'll get a NULL pointer dereference like the
following
"BUG: kernel NULL pointer dereference, address: 00000000000001f0"
RIP: 0010:btrfs_orphan_cleanup+0x2d/0x330
Call Trace:
? btrfs_mksubvol.isra.31+0x3f2/0x510
btrfs_mksubvol.isra.31+0x4bc/0x510
? __sb_start_write+0xfa/0x200
? mnt_want_write_file+0x24/0x50
btrfs_ioctl_snap_create_transid+0x16c/0x1a0
btrfs_ioctl_snap_create_v2+0x11e/0x1a0
btrfs_ioctl+0x1534/0x2c10
? free_debug_processing+0x262/0x2a3
do_vfs_ioctl+0xa6/0x6b0
? do_sys_open+0x188/0x220
? syscall_trace_enter+0x1f8/0x330
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4a/0x1b0
In order to fix this we need to make sure anybody who calls
commit_transaction has trans->dirty set so that they properly set the
trans->transaction->aborted value properly so any waiters know bad
things happened.
This was found while I was running generic/475 with my modified
fsstress, it reproduced within a few runs. I ran with this patch all
night and didn't see the problem again.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5e4ff9d465da1233a2d9a47ebce487c70d8f4ab upstream.
Recently fsstress (from fstests) sporadically started to trigger an
infinite loop during fsync operations. This turned out to be because
support for the rename exchange and whiteout operations was added to
fsstress in fstests. These operations, unlike any others in fsstress,
cause file names to be reused, whence triggering this issue. However
it's not necessary to use rename exchange and rename whiteout operations
trigger this issue, simple rename operations and file creations are
enough to trigger the issue.
The issue boils down to when we are logging inodes that conflict (that
had the name of any inode we need to log during the fsync operation), we
keep logging them even if they were already logged before, and after
that we check if there's any other inode that conflicts with them and
then add it again to the list of inodes to log. Skipping already logged
inodes fixes the issue.
Consider the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir # inode 257
$ touch /mnt/testdir/zz # inode 258
$ ln /mnt/testdir/zz /mnt/testdir/zz_link
$ touch /mnt/testdir/a # inode 259
$ sync
# The following 3 renames achieve the same result as a rename exchange
# operation (<rename_exchange> /mnt/testdir/zz_link to /mnt/testdir/a).
$ mv /mnt/testdir/a /mnt/testdir/a/tmp
$ mv /mnt/testdir/zz_link /mnt/testdir/a
$ mv /mnt/testdir/a/tmp /mnt/testdir/zz_link
# The following rename and file creation give the same result as a
# rename whiteout operation (<rename_whiteout> zz to a2).
$ mv /mnt/testdir/zz /mnt/testdir/a2
$ touch /mnt/testdir/zz # inode 260
$ xfs_io -c fsync /mnt/testdir/zz
--> results in the infinite loop
The following steps happen:
1) When logging inode 260, we find that its reference named "zz" was
used by inode 258 in the previous transaction (through the commit
root), so inode 258 is added to the list of conflicting indoes that
need to be logged;
2) After logging inode 258, we find that its reference named "a" was
used by inode 259 in the previous transaction, and therefore we add
inode 259 to the list of conflicting inodes to be logged;
3) After logging inode 259, we find that its reference named "zz_link"
was used by inode 258 in the previous transaction - we add inode 258
to the list of conflicting inodes to log, again - we had already
logged it before at step 3. After logging it again, we find again
that inode 259 conflicts with him, and we add again 259 to the list,
etc - we end up repeating all the previous steps.
So fix this by skipping logging of conflicting inodes that were already
logged.
Fixes: 6b5fc433a7ad67 ("Btrfs: fix fsync after succession of renames of different files")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 831d2fa25ab8e27592b1b0268dae6f2dfaf7cc43 upstream.
Since btrfs was migrated to use the generic VFS helpers for clone and
deduplication, it stopped allowing for the last block of a file to be
deduplicated when the source file size is not sector size aligned (when
eof is somewhere in the middle of the last block). There are two reasons
for that:
1) The generic code always rounds down, to a multiple of the block size,
the range's length for deduplications. This means we end up never
deduplicating the last block when the eof is not block size aligned,
even for the safe case where the destination range's end offset matches
the destination file's size. That rounding down operation is done at
generic_remap_check_len();
2) Because of that, the btrfs specific code does not expect anymore any
non-aligned range length's for deduplication and therefore does not
work if such nona-aligned length is given.
This patch addresses that second part, and it depends on a patch that
fixes generic_remap_check_len(), in the VFS, which was submitted ealier
and has the following subject:
"fs: allow deduplication of eof block into the end of the destination file"
These two patches address reports from users that started seeing lower
deduplication rates due to the last block never being deduplicated when
the file size is not aligned to the filesystem's block size.
Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e56315ca147b3e60c7bf240233a301d3c7fb508 upstream.
When using the NO_HOLES feature, if we punch a hole into a file and then
fsync it, there are cases where a subsequent fsync will miss the fact that
a hole was punched, resulting in the holes not existing after replaying
the log tree.
Essentially these cases all imply that, tree-log.c:copy_items(), is not
invoked for the leafs that delimit holes, because nothing changed those
leafs in the current transaction. And it's precisely copy_items() where
we currenly detect and log holes, which works as long as the holes are
between file extent items in the input leaf or between the beginning of
input leaf and the previous leaf or between the last item in the leaf
and the next leaf.
First example where we miss a hole:
*) The extent items of the inode span multiple leafs;
*) The punched hole covers a range that affects only the extent items of
the first leaf;
*) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's runtime flags).
That results in the hole not existing after replaying the log tree.
For example, if the fs/subvolume tree has the following layout for a
particular inode:
Leaf N, generation 10:
[ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
If at transaction 11 we punch a hole coverting the range [0, 128K[, we end
up dropping the two extent items from leaf N, but we don't touch the other
leaf, so we end up in the following state:
Leaf N, generation 11:
[ ... INODE_ITEM INODE_REF ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
A full fsync after punching the hole will only process leaf N because it
was modified in the current transaction, but not leaf N + 1, since it
was not modified in the current transaction (generation 10 and not 11).
As a result the fsync will not log any holes, because it didn't process
any leaf with extent items.
Second example where we will miss a hole:
*) An inode as its items spanning 5 (or more) leafs;
*) A hole is punched and it covers only the extents items of the 3rd
leaf. This resulsts in deleting the entire leaf and not touching any
of the other leafs.
So the only leaf that is modified in the current transaction, when
punching the hole, is the first leaf, which contains the inode item.
During the full fsync, the only leaf that is passed to copy_items()
is that first leaf, and that's not enough for the hole detection
code in copy_items() to determine there's a hole between the last
file extent item in the 2nd leaf and the first file extent item in
the 3rd leaf (which was the 4th leaf before punching the hole).
Fix this by scanning all leafs and punch holes as necessary when doing a
full fsync (less common than a non-full fsync) when the NO_HOLES feature
is enabled. The lack of explicit file extent items to mark holes makes it
necessary to scan existing extents to determine if holes exist.
A test case for fstests follows soon.
Fixes: 16e7549f045d33 ("Btrfs: incompatible format change to remove hole extents")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec772f01307a2c06ebf6cdd221e6b518a71ddae7 upstream.
Since ->d_compare() and ->d_hash() can be called in RCU-walk mode,
->d_parent and ->d_inode can be concurrently modified, and in
particular, ->d_inode may be changed to NULL. For ext4_d_hash() this
resulted in a reproducible NULL dereference if a lookup is done in a
directory being deleted, e.g. with:
int main()
{
if (fork()) {
for (;;) {
mkdir("subdir", 0700);
rmdir("subdir");
}
} else {
for (;;)
access("subdir/file", 0);
}
}
... or by running the 't_encrypted_d_revalidate' program from xfstests.
Both repros work in any directory on a filesystem with the encoding
feature, even if the directory doesn't actually have the casefold flag.
I couldn't reproduce a crash in ext4_d_compare(), but it appears that a
similar crash is possible there.
Fix these bugs by reading ->d_parent and ->d_inode using READ_ONCE() and
falling back to the case sensitive behavior if the inode is NULL.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200124041234.159740-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 547c556f4db7c09447ecf5f833ab6aaae0c5ab58 upstream.
ext4_writepages() on an encrypted file has to encrypt the data, but it
can't modify the pagecache pages in-place, so it encrypts the data into
bounce pages and writes those instead. All bounce pages are allocated
from a mempool using GFP_NOFS.
This is not correct use of a mempool, and it can deadlock. This is
because GFP_NOFS includes __GFP_DIRECT_RECLAIM, which enables the "never
fail" mode for mempool_alloc() where a failed allocation will fall back
to waiting for one of the preallocated elements in the pool.
But since this mode is used for all a bio's pages and not just the
first, it can deadlock waiting for pages already in the bio to be freed.
This deadlock can be reproduced by patching mempool_alloc() to pretend
that pool->alloc() always fails (so that it always falls back to the
preallocations), and then creating an encrypted file of size > 128 KiB.
Fix it by only using GFP_NOFS for the first page in the bio. For
subsequent pages just use GFP_NOWAIT, and if any of those fail, just
submit the bio and start a new one.
This will need to be fixed in f2fs too, but that's less straightforward.
Fixes: c9af28fdd449 ("ext4 crypto: don't let data integrity writebacks fail with ENOMEM")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191231181149.47619-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a8e9cf40c9a6a2e40b1e924b13ed303aeea4418 upstream.
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Script below generates endless output
$ q=;while read -r r;do echo "$((++q)) $r";done </proc/fs/jbd2/DEV/info
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Cc: stable@kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d13805e5-695e-8ac3-b678-26ca2313629f@virtuozzo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 28c7d86bb6172ffbb1a1237c6388e77f9fe5f181 upstream.
If the lookup keeps finding a nfsd_file with an unhashed open file,
then retry once only.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Fixes: 65294c1f2c5e "nfsd: add a new struct file caching facility to nfsd"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 114de38225d9b300f027e2aec9afbb6e0def154b upstream.
When a NFS directory page cache page is removed from the page cache,
its contents are freed through a call to nfs_readdir_clear_array().
To prevent the removal of the page cache entry until after we've
finished reading it, we must take the page lock.
Fixes: 11de3b11e08c ("NFS: Fix a memory leak in nfs_readdir")
Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b310319c6a8ce708f1033d57145e2aa027a883c upstream.
nfs_readdir_xdr_to_array() must not exit without having initialised
the array, so that the page cache deletion routines can safely
call nfs_readdir_clear_array().
Furthermore, we should ensure that if we exit nfs_readdir_filler()
with an error, we free up any page contents to prevent a leak
if we try to fill the page again.
Fixes: 11de3b11e08c ("NFS: Fix a memory leak in nfs_readdir")
Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 05840710149c7d1a78ea85a2db5723f706e97d8f upstream.
There is one more cases which isn't handled by the original metadata
uuid work. Namely, when a filesystem has METADATA_UUID incompat bit and
the user decides to change the FSID to the original one e.g. have
metadata_uuid and fsid match. In case of power failure while this
operation is in progress we could end up in a situation where some of
the disks have the incompat bit removed and the other half have both
METADATA_UUID_INCOMPAT and FSID_CHANGING_IN_PROGRESS flags.
This patch handles the case where a disk that has successfully changed
its FSID such that it equals METADATA_UUID is scanned first.
Subsequently when a disk with both
METADATA_UUID_INCOMPAT/FSID_CHANGING_IN_PROGRESS flags is scanned
find_fsid_changed won't be able to find an appropriate btrfs_fs_devices.
This is done by extending find_fsid_changed to correctly find
btrfs_fs_devices whose metadata_uuid/fsid are the same and they match
the metadata_uuid of the currently scanned device.
Fixes: cc5de4e70256 ("btrfs: Handle final split-brain possibility during fsid change")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reported-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 556755a8a99be8ca3cd9fbe36aaf9b3b0339a00d upstream.
We noticed that we were having regular CG OOM kills in cases where there
was still enough dirty pages to avoid OOM'ing. It turned out there's
this corner case in btrfs's handling of range_cyclic where files that
were being redirtied were not getting fully written out because of how
we do range_cyclic writeback.
We unconditionally were setting scanned = 1; the first time we found any
pages in the inode. This isn't actually what we want, we want it to be
set if we've scanned the entire file. For range_cyclic we could be
starting in the middle or towards the end of the file, so we could write
one page and then not write any of the other dirty pages in the file
because we set scanned = 1.
Fix this by not setting scanned = 1 if we find pages. The rules for
setting scanned should be
1) !range_cyclic. In this case we have a specified range to write out.
2) range_cyclic && index == 0. In this case we've started at the
beginning and there is no need to loop around a second time.
3) range_cyclic && we started at index > 0 and we've reached the end of
the file without satisfying our nr_to_write.
This patch fixes both of our writepages implementations to make sure
these rules hold true. This fixed our over zealous CG OOMs in
production.
Fixes: d1310b2e0cd9 ("Btrfs: Split the extent_map code into two parts")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80f2388afa6ef985f9c5c228e36705c4d4db4756 upstream.
Since ->d_compare() and ->d_hash() can be called in RCU-walk mode,
->d_parent and ->d_inode can be concurrently modified, and in
particular, ->d_inode may be changed to NULL. For f2fs_d_hash() this
resulted in a reproducible NULL dereference if a lookup is done in a
directory being deleted, e.g. with:
int main()
{
if (fork()) {
for (;;) {
mkdir("subdir", 0700);
rmdir("subdir");
}
} else {
for (;;)
access("subdir/file", 0);
}
}
... or by running the 't_encrypted_d_revalidate' program from xfstests.
Both repros work in any directory on a filesystem with the encoding
feature, even if the directory doesn't actually have the casefold flag.
I couldn't reproduce a crash in f2fs_d_compare(), but it appears that a
similar crash is possible there.
Fix these bugs by reading ->d_parent and ->d_inode using READ_ONCE() and
falling back to the case sensitive behavior if the inode is NULL.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 2c2eb7a300cd ("f2fs: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5515eae647426169e4b7969271fb207881eba7f6 upstream.
Do the name comparison for non-casefolded directories correctly.
This is analogous to ext4's commit 66883da1eee8 ("ext4: fix dcache
lookup of !casefolded directories").
Fixes: 2c2eb7a300cd ("f2fs: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf2cbd3c57159c2b639ee8797b52ab5af180bf83 upstream.
Calling min_not_zero() to simplify complicated prjquota
limit comparison in f2fs_statfs_project().
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit acdf2172172a511f97fa21ed0ee7609a6d3b3a07 upstream.
statfs calculates Total/Used/Avail disk space in block unit,
so we should translate soft/hard prjquota limit to block unit
as well.
Below testing result shows the block/inode numbers of
Total/Used/Avail from df command are all correct afer
applying this patch.
[root@localhost quota-tools]\# ./repquota -P /dev/sdb1
|
|
f2fs_statfs_project()
commit 909110c060f22e65756659ec6fa957ae75777e00 upstream.
Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.
For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).
[root@hades f2fs]# repquota -P -a
|
|
commit a4ac9d45c0cd14a2adc872186431c79804b77dbf upstream.
ovl_lseek() is using ssize_t to return the value from vfs_llseek(). On a
32-bit kernel ssize_t is a 32-bit signed int, which overflows above 2 GB.
Assign the return value of vfs_llseek() to loff_t to fix this.
Reported-by: Boris Gjenero <boris.gjenero@gmail.com>
Fixes: 9e46b840c705 ("ovl: support stacked SEEK_HOLE/SEEK_DATA")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c37e71b713ecffe81f8e6273c6835e54306d412 upstream.
The WARN_ON() that child entry is always on overlay st_dev became wrong
when we allowed this function to update d_ino in non-samefs setup with xino
enabled.
It is not true in case of xino bits overflow on a non-dir inode. Leave the
WARN_ON() only for directories, where assertion is still true.
Fixes: adbf4f7ea834 ("ovl: consistent d_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d2024370d877f9ac8b98694bcff666da6a5d333 upstream.
rq->out[1] should be valid before accessing. Otherwise,
in very rare cases, out-of-bound dirty onstack rq->out[1]
can equal to *in and lead to unintended memmove behavior.
Link: https://lore.kernel.org/r/20200107022546.19432-1-gaoxiang25@huawei.com
Fixes: 7fc45dbc938a ("staging: erofs: introduce generic decompression backend")
Cc: <stable@vger.kernel.org> # 5.3+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5e6ea18e3d132be4716eb5fdd520c2c234e3003 upstream.
We always round down, to a multiple of the filesystem's block size, the
length to deduplicate at generic_remap_check_len(). However this is only
needed if an attempt to deduplicate the last block into the middle of the
destination file is requested, since that leads into a corruption if the
length of the source file is not block size aligned. When an attempt to
deduplicate the last block into the end of the destination file is
requested, we should allow it because it is safe to do it - there's no
stale data exposure and we are prepared to compare the data ranges for
a length not aligned to the block (or page) size - in fact we even do
the data compare before adjusting the deduplication length.
After btrfs was updated to use the generic helpers from VFS (by commit
34a28e3d77535e ("Btrfs: use generic_remap_file_range_prep() for cloning
and deduplication")) we started to have user reports of deduplication
not reflinking the last block anymore, and whence users getting lower
deduplication scores. The main use case is deduplication of entire
files that have a size not aligned to the block size of the filesystem.
We already allow cloning the last block to the end (and beyond) of the
destination file, so allow for deduplication as well.
Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5de5b83303e61b1f3fb09bd77ce3ac2d7a475f2 upstream.
In ubifs, concurrent execution of writepage and bulk read on the same file
may cause ABBA deadlock, for example (Reproduce method see Link):
Process A(Bulk-read starts from page4) Process B(write page4 back)
vfs_read wb_workfn or fsync
... ...
generic_file_buffered_read write_cache_pages
ubifs_readpage LOCK(page4)
ubifs_bulk_read ubifs_writepage
LOCK(ui->ui_mutex) ubifs_write_inode
ubifs_do_bulk_read LOCK(ui->ui_mutex)
find_or_create_page(alloc page4) ↑
LOCK(page4) <-- ABBA deadlock occurs!
In order to ensure the serialization execution of bulk read, we can't
remove the big lock 'ui->ui_mutex' in ubifs_bulk_read(). Instead, we
allow ubifs_do_bulk_read() to lock page failed by replacing
find_or_create_page(FGP_LOCK) with
pagecache_get_page(FGP_LOCK | FGP_NOWAIT).
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: zhangyi (F) <yi.zhang@huawei.com>
Cc: <Stable@vger.kernel.org>
Fixes: 4793e7c5e1c ("UBIFS: add bulk-read facility")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206153
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b57067a7778484c10892fa191997bfda29fea13 upstream.
UBIFS's implementation of FS_IOC_SETFLAGS fails to preserve existing
inode flags that aren't settable by FS_IOC_SETFLAGS, namely the encrypt
flag. This causes the encrypt flag to be unexpectedly cleared.
Fix it by preserving existing unsettable flags, like ext4 and f2fs do.
Test case with kvm-xfstests shell:
FSTYP=ubifs KEYCTL_PROG=keyctl
. fs/ubifs/config
. ~/xfstests/common/encrypt
dev=$(__blkdev_to_ubi_volume /dev/vdc)
ubiupdatevol -t $dev
mount $dev /mnt -t ubifs
k=$(_generate_session_encryption_key)
mkdir /mnt/edir
xfs_io -c "set_encpolicy $k" /mnt/edir
echo contents > /mnt/edir/file
chattr +i /mnt/edir/file
chattr -i /mnt/edir/file
With the bug, the following errors occur on the last command:
[ 18.081559] fscrypt (ubifs, inode 67): Inconsistent encryption context (parent directory: 65)
chattr: Operation not permitted while reading flags on /mnt/edir/file
Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edec51374bce779f37fc209a228139c55d90ec8d upstream.
In create_default_filesystem() when we allocate the idx node we must use
the idx_node_size we calculated just one line before, not tmp, which
contains completely other data.
Fixes: c4de6d7e4319 ("ubifs: Refactor create_default_filesystem()")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Tested-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0d07a98a070bb5e443df19c3aa55693cbca9341 upstream.
If userspace provides an invalid fscrypt no-key filename which encodes a
hash value with any of the UBIFS node type bits set (i.e. the high 3
bits), gracefully report ENOENT rather than triggering ubifs_assert().
Test case with kvm-xfstests shell:
. fs/ubifs/config
. ~/xfstests/common/encrypt
dev=$(__blkdev_to_ubi_volume /dev/vdc)
ubiupdatevol $dev -t
mount $dev /mnt -t ubifs
mkdir /mnt/edir
xfs_io -c set_encpolicy /mnt/edir
rm /mnt/edir/_,,,,,DAAAAAAAAAAAAAAAAAAAAAAAAAA
With the bug, the following assertion fails on the 'rm' command:
[ 19.066048] UBIFS error (ubi0:0 pid 379): ubifs_assert_failed: UBIFS assert failed: !(hash & ~UBIFS_S_KEY_HASH_MASK), in fs/ubifs/key.h:170
Fixes: f4f61d2cc6d8 ("ubifs: Implement encrypted filenames")
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://lore.kernel.org/r/20200120223201.241390-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13a10da94615d81087e718517794f2868a8b3fab upstream.
When an encryption key can't be fully removed due to file(s) protected
by it still being in-use, we shouldn't really print the path to one of
these files to the kernel log, since parts of this path are likely to be
encrypted on-disk, and (depending on how the system is set up) the
confidentiality of this path might be lost by printing it to the log.
This is a trade-off: a single file path often doesn't matter at all,
especially if it's a directory; the kernel log might still be protected
in some way; and I had originally hoped that any "inode(s) still busy"
bugs (which are security weaknesses in their own right) would be quickly
fixed and that to do so it would be super helpful to always know the
file path and not have to run 'find dir -inum $inum' after the fact.
But in practice, these bugs can be hard to fix (e.g. due to asynchronous
process killing that is difficult to eliminate, for performance
reasons), and also not tied to specific files, so knowing a file path
doesn't necessarily help.
So to be safe, for now let's just show the inode number, not the path.
If someone really wants to know a path they can use 'find -inum'.
Fixes: b1c0ec3599f4 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200120060732.390362-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb31e2f63d85d1bec4f7b136f317e03c03db5503 upstream.
Push clamping timestamps into notify_change(), so in-kernel
callers like nfsd and overlayfs will get similar timestamp
set behavior as utimes.
AV: get rid of clamping in ->setattr() instances; we don't need
to bother with that there, with notify_change() doing normalization
in all cases now (it already did for implicit case, since current_time()
clamps).
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 42e729b9ddbb ("utimes: Clamp the timestamps before update")
Cc: stable@vger.kernel.org # v5.4
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 68f23b89067fdf187763e75a56087550624fdbee upstream.
Without memcg, there is a one-to-one mapping between the bdi and
bdi_writeback structures. In this world, things are fairly
straightforward; the first thing bdi_unregister() does is to shutdown
the bdi_writeback structure (or wb), and part of that writeback ensures
that no other work queued against the wb, and that the wb is fully
drained.
With memcg, however, there is a one-to-many relationship between the bdi
and bdi_writeback structures; that is, there are multiple wb objects
which can all point to a single bdi. There is a refcount which prevents
the bdi object from being released (and hence, unregistered). So in
theory, the bdi_unregister() *should* only get called once its refcount
goes to zero (bdi_put will drop the refcount, and when it is zero,
release_bdi gets called, which calls bdi_unregister).
Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about
the Brave New memcg World, and calls bdi_unregister directly. It does
this without informing the file system, or the memcg code, or anything
else. This causes the root wb associated with the bdi to be
unregistered, but none of the memcg-specific wb's are shutdown. So when
one of these wb's are woken up to do delayed work, they try to
dereference their wb->bdi->dev to fetch the device name, but
unfortunately bdi->dev is now NULL, thanks to the bdi_unregister()
called by del_gendisk(). As a result, *boom*.
Fortunately, it looks like the rest of the writeback path is perfectly
happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to
create a bdi_dev_name() function which can handle bdi->dev being NULL.
This also allows us to bulletproof the writeback tracepoints to prevent
them from dereferencing a NULL pointer and crashing the kernel if one is
tracing with memcg's enabled, and an iSCSI device dies or a USB storage
stick is pulled.
The most common way of triggering this will be hotremoval of a device
while writeback with memcg enabled is going on. It was triggering
several times a day in a heavily loaded production environment.
Google Bug Id: 145475544
Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu
Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d55966c4279bfc6a0cf0b32bf13f5df228a1eeb6 upstream.
There was some logic added a while ago to clear out f_bavail in statfs()
if we did not have enough free metadata space to satisfy our global
reserve. This was incorrect at the time, however didn't really pose a
problem for normal file systems because we would often allocate chunks
if we got this low on free metadata space, and thus wouldn't really hit
this case unless we were actually full.
Fast forward to today and now we are much better about not allocating
metadata chunks all of the time. Couple this with d792b0f19711 ("btrfs:
always reserve our entire size for the global reserve") which now means
we'll easily have a larger global reserve than our free space, we are
now more likely to trip over this while still having plenty of space.
Fix this by skipping this logic if the global rsv's space_info is not
full. space_info->full is 0 unless we've attempted to allocate a chunk
for that space_info and that has failed. If this happens then the space
for the global reserve is definitely sacred and we need to report
b_avail == 0, but before then we can just use our calculated b_avail.
Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Fixes: ca8a51b3a979 ("btrfs: statfs: report zero available if metadata are exhausted")
CC: stable@vger.kernel.org # 4.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-By: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5474ca7da6f34fa95e82edc747d5faa19cbdfb5c upstream.
When a filesystem is mounted with jdev mount option, we store the
journal device name in an allocated string in superblock. However we
fail to ever free that string. Fix it.
Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com
Fixes: c3aa077648e1 ("reiserfs: Properly display mount options in /proc/mounts")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
