summaryrefslogtreecommitdiff
path: root/fs/f2fs/data.c
AgeCommit message (Collapse)AuthorFilesLines
2014-07-10f2fs: avoid unneeded SetPageUptodate in f2fs_write_endChao Yu1-1/+0
We have already set page update in ->write_begin, so we should remove redundant SetPageUptodate in ->write_end. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-23f2fs: fix to report newly allocate region as extentJaegeuk Kim1-5/+18
Previous get_block in f2fs didn't report the newly allocated region which has NEW_ADDR. For reader, it should not report, but fiemap needs this. So, this patch introduces two get_block sharing core function. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-12Merge branch 'for-linus' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "This the bunch that sat in -next + lock_parent() fix. This is the minimal set; there's more pending stuff. In particular, I really hope to get acct.c fixes merged this cycle - we need that to deal sanely with delayed-mntput stuff. In the next pile, hopefully - that series is fairly short and localized (kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more iov_iter work. Most of prereqs for ->splice_write with sane locking order are there and Kent's dio rewrite would also fit nicely on top of this pile" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits) lock_parent: don't step on stale ->d_parent of all-but-freed one kill generic_file_splice_write() ceph: switch to iter_file_splice_write() shmem: switch to iter_file_splice_write() nfs: switch to iter_splice_write_file() fs/splice.c: remove unneeded exports ocfs2: switch to iter_file_splice_write() ->splice_write() via ->write_iter() bio_vec-backed iov_iter optimize copy_page_{to,from}_iter() bury generic_file_aio_{read,write} lustre: get rid of messing with iovecs ceph: switch to ->write_iter() ceph_sync_direct_write: stop poking into iov_iter guts ceph_sync_read: stop poking into iov_iter guts new helper: copy_page_from_iter() fuse: switch to ->write_iter() btrfs: switch to ->write_iter() ocfs2: switch to ->write_iter() xfs: switch to ->write_iter() ...
2014-06-08f2fs: support f2fs_fiemapJaegeuk Kim1-0/+6
This patch links f2fs_fiemap with generic function with get_block. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04f2fs: fix to recover data written by dioJaegeuk Kim1-0/+3
If data are overwritten through dio, previous f2fs doesn't remain the fsync mark due to no additional node writes. Note that this patch should resolve the xfstests:311. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-05-07f2fs: add a tracepoint for f2fs_read_data_pageChao Yu1-0/+2
This patch adds a tracepoint for f2fs_read_data_page to trace when page is readed by user. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pagesChao Yu1-0/+2
This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when pages are fsyncing/flushing. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pageChao Yu1-0/+2
This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when page is writting out. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_endChao Yu1-0/+2
This patch adds a tracepoint for f2fs_write_end to trace write op of user. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_beginChao Yu1-0/+2
This patch adds a tracepoint for f2fs_write_begin to trace write op of user. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: decrease the lock granularity during write_beginJaegeuk Kim1-1/+13
This patch reduces the lock granularity during write_begin. When the system is under memory pressure, it would be better to reduce the locking time for the data pages. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: avoid grab_cache_page_write_begin for data pagesJaegeuk Kim1-2/+2
We don't need to wait on page writeback for these cases. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: introduce help macro ADDRS_PER_PAGE()Chao Yu1-4/+2
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in direct node or inode. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: submit bio at the reclaim pathJaegeuk Kim1-0/+2
If f2fs_write_data_page is called through the reclaim path, we should submit the bio right away. This patch resolves the following issue that Marc Dietrich reported. "It took me a while to bisect a problem which causes my ARM (tegra2) netbook to frequently stall for 5-10 seconds when I enable EXA acceleration (opentegra experimental ddx)." And this patch fixes that. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: handle inline data independently in f2fs_bmapChao Yu1-0/+5
We'd better handle inline data case independently in f2fs_bmap(). It can reduce our handling time in f2fs_bmap(). Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: adjust free mem size to flush dentry blocksJaegeuk Kim1-1/+2
If so many dirty dentry blocks are cached, not reached to the flush condition, we should fall into livelock in balance_dirty_pages. So, let's consider the mem size for the condition. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: call redirty_page_for_writepageJaegeuk Kim1-7/+3
This patch replace some general codes with redirty_page_for_writepage, which can be enabled after consideration on additional procedure like counting dirty pages appropriately. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: switch to iov_iter_alignment()Al Viro1-6/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-07switch {__,}blockdev_direct_IO() to iov_iterAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-07pass iov_iter to ->direct_IO()Al Viro1-4/+4
unmodified, for now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-02f2fs: fix error path when fail to read inline dataChao Yu1-4/+10
We should unlock page in ->readpage() path and also should unlock & release page in error path of ->write_begin() to avoid deadlock or memory leak. So let's add release code to fix the problem when we fail to read inline data. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-01f2fs: avoid unnecessary bio submit when wait page writebackChao Yu1-4/+4
This patch introduce is_merged_page() to check whether current page is merged in f2fs bio cache. When page is not in cache, we can avoid submitting bio cache, resulting in having more chance to merge pages. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18f2fs: introduce nr_pages_to_write for segment alignmentJaegeuk Kim1-9/+3
This patch introduces nr_pages_to_write to align page writes to the segment or other operational unit size, which can be tuned according to the system environment. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18f2fs: increase pages_skipped when skipping writepagesJaegeuk Kim1-1/+5
This patch increases pages_skipped when skipping writepages. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18f2fs: avoid small data writes by skipping writepagesJaegeuk Kim1-0/+4
This patch introduces nr_pages_to_skip(sbi, type) to determine writepages can be skipped. The dentry, node, and meta pages can be conrolled by F2FS without breaking the FS consistency. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-28f2fs: fix dirty page accounting when redirtyChao Yu1-0/+1
We should de-account dirty counters for page when redirty in ->writepage(). Wu Fengguang described in 'commit 971767caf632190f77a40b4011c19948232eed75': "writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints)." Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-24f2fs: fix not to write data pages on the page reclaiming pathJaegeuk Kim1-23/+15
Even if f2fs_write_data_page is called by the page reclaiming path, we should not write the page to provide enough free segments for the worst case scenario. Otherwise, f2fs can face with no free segment while gc is conducted, resulting in: ------------[ cut here ]------------ kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/segment.c:565! RIP: 0010:[<ffffffffa02c3b11>] [<ffffffffa02c3b11>] new_curseg+0x331/0x340 [f2fs] Call Trace: allocate_segment_by_default+0x204/0x280 [f2fs] allocate_data_block+0x108/0x210 [f2fs] write_data_page+0x8a/0xc0 [f2fs] do_write_data_page+0xe1/0x2a0 [f2fs] move_data_page+0x8a/0xf0 [f2fs] f2fs_gc+0x446/0x970 [f2fs] f2fs_balance_fs+0xb6/0xd0 [f2fs] f2fs_write_begin+0x50/0x350 [f2fs] ? unlock_page+0x27/0x30 ? unlock_page+0x27/0x30 generic_file_buffered_write+0x10a/0x280 ? file_update_time+0xa3/0xf0 __generic_file_aio_write+0x1c8/0x3d0 ? generic_file_aio_write+0x52/0xb0 ? generic_file_aio_write+0x52/0xb0 generic_file_aio_write+0x65/0xb0 do_sync_write+0x5a/0x90 vfs_write+0xc5/0x1f0 SyS_write+0x55/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-17f2fs: clean up redundant function callJaegeuk Kim1-9/+2
This patch integrates inode_[inc|dec]_dirty_dents with inc_page_count to remove redundant calls. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-17f2fs: remove the ugly pointer conversionJaegeuk Kim1-4/+7
This patch modifies the use of bi_private to remove pointer chasing for sbi. Previously, we had a bi_private structure, but it needs memory allocation. So this patch uses bi_private by the sbi pointer and adds a completion pointer into the sbi. This can achieve no memory allocation and nice use of the bi_private. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-17f2fs: update_inode_page should be done all the timeJaegeuk Kim1-2/+1
In order to make fs consistency, update_inode_page should not be failed all the time. Otherwise, it is possible to lose some metadata in the inode like a link count. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-30Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-21/+14
Pull core block IO changes from Jens Axboe: "The major piece in here is the immutable bio_ve series from Kent, the rest is fairly minor. It was supposed to go in last round, but various issues pushed it to this release instead. The pull request contains: - Various smaller blk-mq fixes from different folks. Nothing major here, just minor fixes and cleanups. - Fix for a memory leak in the error path in the block ioctl code from Christian Engelmayer. - Header export fix from CaiZhiyong. - Finally the immutable biovec changes from Kent Overstreet. This enables some nice future work on making arbitrarily sized bios possible, and splitting more efficient. Related fixes to immutable bio_vecs: - dm-cache immutable fixup from Mike Snitzer. - btrfs immutable fixup from Muthu Kumar. - bio-integrity fix from Nic Bellinger, which is also going to stable" * 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits) xtensa: fixup simdisk driver to work with immutable bio_vecs block/blk-mq-cpu.c: use hotcpu_notifier() blk-mq: for_each_* macro correctness block: Fix memory leak in rw_copy_check_uvector() handling bio-integrity: Fix bio_integrity_verify segment start bug block: remove unrelated header files and export symbol blk-mq: uses page->list incorrectly blk-mq: use __smp_call_function_single directly btrfs: fix missing increment of bi_remaining Revert "block: Warn and free bio if bi_end_io is not set" block: Warn and free bio if bi_end_io is not set blk-mq: fix initializing request's start time block: blk-mq: don't export blk_mq_free_queue() block: blk-mq: make blk_sync_queue support mq block: blk-mq: support draining mq queue dm cache: increment bi_remaining when bi_end_io is restored block: fixup for generic bio chaining block: Really silence spurious compiler warnings block: Silence spurious compiler warnings block: Kill bio_pair_split() ...
2014-01-22f2fs: call mark_inode_dirty to flush dirty pagesJaegeuk Kim1-1/+3
If a dentry page is updated, we should call mark_inode_dirty to add the inode into the dirty list, so that its dentry pages are flushed to the disk. Otherwise, the inode can be evicted without flush. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-20f2fs: clean checkpatch warningsChris Fries1-1/+1
Fixed a variety of trivial checkpatch warnings. The only delta should be some minor formatting on log strings that were split / too long. Signed-off-by: Chris Fries <cfries@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-16f2fs: missing REQ_META and REQ_PRIO when sync_meta_pages(META_FLUSH)Changman Lee1-1/+1
Doing sync_meta_pages with META_FLUSH when checkpoint, we overide rw using WRITE_FLUSH_FUA. At this time, we also should set REQ_META|REQ_PRIO. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-16f2fs: avoid f2fs_balance_fs call during pageoutJaegeuk Kim1-1/+3
This patch should resolve the following bug. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.13.0-rc5.f2fs+ #6 Not tainted --------------------------------------------------------- kswapd0/41 just changed the state of lock: (&sbi->gc_mutex){+.+.-.}, at: [<ffffffffa030503e>] f2fs_balance_fs+0xae/0xd0 [f2fs] but this lock took another, RECLAIM_FS-READ-unsafe lock in the past: (&sbi->cp_rwsem){++++.?} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Chain exists of: &sbi->gc_mutex --> &sbi->cp_mutex --> &sbi->cp_rwsem Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->cp_rwsem); local_irq_disable(); lock(&sbi->gc_mutex); lock(&sbi->cp_mutex); <Interrupt> lock(&sbi->gc_mutex); *** DEADLOCK *** This bug is due to the f2fs_balance_fs call in f2fs_write_data_page. If f2fs_write_data_page is triggered by wbc->for_reclaim via kswapd, it should not call f2fs_balance_fs which tries to get a mutex grabbed by original syscall flow. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-14f2fs: remove the needless parameter of f2fs_wait_on_page_writebackYuan Zhong1-1/+1
"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback. We should remove this parameter. Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: handle errors correctly during f2fs_reserve_blockJaegeuk Kim1-9/+20
The get_dnode_of_data nullifies inode and node page when error is occurred. There are two cases that passes inode page into get_dnode_of_data(). 1. make_empty_dir() -> get_new_data_page() -> f2fs_reserve_block(ipage) -> get_dnode_of_data() 2. f2fs_convert_inline_data() -> __f2fs_convert_inline_data() -> f2fs_reserve_block(ipage) -> get_dnode_of_data() This patch adds correct error handling codes when get_dnode_of_data() returns an error. At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block returns an error. So, the rule of f2fs_reserve_block() is to nullify inode page when there is any error internally. Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode() appropriately if they got an error since successful f2fs_reserve_block(). Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: refactor f2fs_convert_inline_dataJaegeuk Kim1-10/+6
Change log from v1: o handle NULL pointer of grab_cache_page_write_begin() pointed by Chao Yu. This patch refactors f2fs_convert_inline_data to check a couple of conditions internally for deciding whether it needs to convert inline_data or not. So, the new f2fs_convert_inline_data initially checks: 1) f2fs_has_inline_data(), and 2) the data size to be changed. If the inode has inline_data but the size to fill is less than MAX_INLINE_DATA, then we don't need to convert the inline_data with data allocation. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: call f2fs_put_page at the error caseJaegeuk Kim1-1/+3
In f2fs_write_begin(), if f2fs_conver_inline_data() returns an error like -ENOSPC, f2fs should call f2fs_put_page(). Otherwise, it is remained as a locked page, resulting in the following bug. [<ffffffff8114657e>] sleep_on_page+0xe/0x20 [<ffffffff81146567>] __lock_page+0x67/0x70 [<ffffffff81157d08>] truncate_inode_pages_range+0x368/0x5d0 [<ffffffff81157ff5>] truncate_inode_pages+0x15/0x20 [<ffffffff8115804b>] truncate_pagecache+0x4b/0x70 [<ffffffff81158082>] truncate_setsize+0x12/0x20 [<ffffffffa02a1842>] f2fs_setattr+0x72/0x270 [f2fs] [<ffffffff811cdae3>] notify_change+0x213/0x400 [<ffffffff811ab376>] do_truncate+0x66/0xa0 [<ffffffff811ab541>] vfs_truncate+0x191/0x1b0 [<ffffffff811ab5bc>] do_sys_truncate+0x5c/0xa0 [<ffffffff811ab78e>] SyS_truncate+0xe/0x10 [<ffffffff81756052>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26f2fs: handle inline data operationsHuajun Li1-5/+44
Hook inline data read/write, truncate, fallocate, setattr, etc. Files need meet following 2 requirement to inline: 1) file size is not greater than MAX_INLINE_DATA; 2) file doesn't pre-allocate data blocks by fallocate(). FI_INLINE_DATA will not be set while creating a new regular inode because most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when data is submitted to block layer, ranther than set it while creating a new inode, this also avoids converting data from inline to normal data block and vice versa. While writting inline data to inode block, the first data block should be released if the file has a block indexed by i_addr[0]. On the other hand, when a file operation is appied to a file with inline data, we need to test if this file can remain inline by doing this operation, otherwise it should be convert into normal file by reserving a new data block, copying inline data to this new block and clear FI_INLINE_DATA flag. Because reserve a new data block here will make use of i_addr[0], if we save inline data in i_addr[0..872], then the first 4 bytes would be overwriten. This problem can be avoided simply by not using i_addr[0] for inline data. Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26f2fs: check the blocksize before calling generic_direct_IO pathJaegeuk Kim1-0/+22
The f2fs supports 4KB block size. If user requests dwrite with under 4KB data, it allocates a new 4KB data block. However, f2fs doesn't add zero data into the untouched data area inside the newly allocated data block. This incurs an error during the xfstest #263 test as follow. 263 12s ... [failed, exit status 1] - output mismatch (see 263.out.bad) --- 263.out 2013-03-09 03:37:15.043967603 +0900 +++ 263.out.bad 2013-12-27 04:20:39.230203114 +0900 @@ -1,3 +1,976 @@ QA output created by 263 fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z +fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z +truncating to largest ever: 0x12a00 +truncating to largest ever: 0x75400 +fallocating to largest ever: 0x79cbf ... (Run 'diff -u 263.out 263.out.bad' to see the entire diff) Ran: 263 Failures: 263 Failed 1 of 1 tests It turns out that, when the test tries to write 2KB data with dio, the new dio path allocates 4KB data block without filling zero data inside the remained 2KB area. Finally, the output file contains a garbage data for that region. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26f2fs: should put the dnode when NEW_ADDR is detectedJaegeuk Kim1-2/+7
When get_dnode_of_data() in get_data_block() returns a successful dnode, we should put the dnode. But, previously, if its data block address is equal to NEW_ADDR, we didn't do that, resulting in a deadlock condition. So, this patch splits original error conditions with this case, and then calls f2fs_put_dnode before finishing the function. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: update several commentsChao Yu1-6/+8
Update several comments: 1. use f2fs_{un}lock_op install of mutex_{un}lock_op. 2. update comment of get_data_block(). 3. update description of node offset. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: remove the rw_flag domain from f2fs_io_infoGu Zheng1-2/+1
When using the f2fs_io_info in the low level, we still need to merge the rw and rw_flag, so use the rw to hold all the io flags directly, and remove the rw_flag field. ps.It is based on the previous patch: f2fs: move all the bio initialization into __bio_alloc Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: move all the bio initialization into __bio_allocGu Zheng1-50/+42
Move all the bio initialization into __bio_alloc, and some minor cleanups are also added. v3: Use 'bool' rather than 'int' as Kim suggested. v2: Use 'is_read' rather than 'rw' as Yu Chao suggested. Remove the needless initialization of bio->bi_private. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: introduce a new direct_IO write pathJaegeuk Kim1-40/+112
Previously, f2fs doesn't support direct IOs with high performance, which throws every write requests via the buffered write path, resulting in highly performance degradation due to memory opeations like copy_from_user. This patch introduces a new direct IO path in which every write requests are processed by generic blockdev_direct_IO() with enhanced get_block function. The get_data_block() in f2fs handles: 1. if original data blocks are allocates, then give them to blockdev. 2. otherwise, a. preallocate requested block addresses b. do not use extent cache for better performance c. give the block addresses to blockdev This policy induces that: - new allocated data are sequentially written to the disk - updated data are randomly written to the disk. - f2fs gives consistency on its file meta, not file data. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: fix the location of tracepointJaegeuk Kim1-2/+2
We need to get a trace before submit_bio, since its bi_sector is remapped during the submit_bio. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: refactor bio->rw handlingJaegeuk Kim1-42/+43
This patch introduces f2fs_io_info to mitigate the complex parameter list. struct f2fs_io_info { enum page_type type; /* contains DATA/NODE/META/META_FLUSH */ int rw; /* contains R/RS/W/WS */ int rw_flag; /* contains REQ_META/REQ_PRIO */ } 1. f2fs_write_data_pages - DATA - WRITE_SYNC is set when wbc->WB_SYNC_ALL. 2. sync_node_pages - NODE - WRITE_SYNC all the time 3. sync_meta_pages - META - WRITE_SYNC all the time - REQ_META | REQ_PRIO all the time ** f2fs_submit_merged_bio() handles META_FLUSH. 4. ra_nat_pages, ra_sit_pages, ra_sum_pages - META - READ_SYNC Cc: Fan Li <fanofcode.li@samsung.com> Cc: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: merge pages with the same sync_mode flagFan Li1-8/+10
Previously f2fs submits most of write requests using WRITE_SYNC, but f2fs_write_data_pages submits last write requests by sync_mode flags callers pass. This causes a performance problem since continuous pages with different sync flags can't be merged in cfq IO scheduler(thanks yu chao for pointing it out), and synchronous requests often take more time. This patch makes the following modifies to DATA writebacks: 1. every page will be written back using the sync mode caller pass. 2. only pages with the same sync mode can be merged in one bio request. These changes are restricted to DATA pages.Other types of writebacks are modified To remain synchronous. In my test with tiotest, f2fs sequence write performance is improved by about 7%-10% , and this patch has no obvious impact on other performance tests. Signed-off-by: Fan Li <fanofcode.li@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: add unlikely() macro for compiler more aggressivelyJaegeuk Kim1-15/+14
This patch adds unlikely() macro into the most of codes. The basic rule is to add that when: - checking unusual errors, - checking page mappings, - and the other unlikely conditions. Change log from v1: - Don't add unlikely for the NULL test and error test: advised by Andi Kleen. Cc: Chao Yu <chao2.yu@samsung.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 20:48:51 +0300