summaryrefslogtreecommitdiff
path: root/fs/btrfs/disk-io.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-29btrfs: reloc: clear DEAD_RELOC_TREE bit for orphan roots to prevent runaway ↵Qu Wenruo1-0/+1
balance commit 1dae7e0e58b484eaa43d530f211098fdeeb0f404 upstream. [BUG] There are several reported runaway balance, that balance is flooding the log with "found X extents" where the X never changes. [CAUSE] Commit d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") introduced BTRFS_ROOT_DEAD_RELOC_TREE bit to indicate that one subvolume has finished its tree blocks swap with its reloc tree. However if balance is canceled or hits ENOSPC halfway, we didn't clear the BTRFS_ROOT_DEAD_RELOC_TREE bit, leaving that bit hanging forever until unmount. Any subvolume root with that bit, would cause backref cache to skip this tree block, as it has finished its tree block swap. This would cause all tree blocks of that root be ignored by balance, leading to runaway balance. [FIX] Fix the problem by also clearing the BTRFS_ROOT_DEAD_RELOC_TREE bit for the original subvolume of orphan reloc root. Add an umount check for the stale bit still set. Fixes: d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16btrfs: reset tree root pointer after error in init_tree_rootsJosef Bacik1-2/+4
commit 0465337c5599bbe360cdcff452992a1a6b7ed2d4 upstream. Eric reported an issue where mounting -o recovery with a fuzzed fs resulted in a kernel panic. This is because we tried to free the tree node, except it was an error from the read. Fix this by properly resetting the tree_root->node == NULL in this case. The panic was the following BTRFS warning (device loop0): failed to read tree root BUG: kernel NULL pointer dereference, address: 000000000000001f RIP: 0010:free_extent_buffer+0xe/0x90 [btrfs] Call Trace: free_root_extent_buffers.part.0+0x11/0x30 [btrfs] free_root_pointers+0x1a/0xa2 [btrfs] open_ctree+0x1776/0x18a5 [btrfs] btrfs_mount_root.cold+0x13/0xfa [btrfs] ? selinux_fs_context_parse_param+0x37/0x80 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 fc_mount+0xe/0x30 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x147/0x3e0 [btrfs] ? cred_has_capability+0x7c/0x120 ? legacy_get_tree+0x27/0x40 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 do_mount+0x735/0xa40 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Nik says: this is problematic only if we fail on the last iteration of the loop as this results in init_tree_roots returning err value with tree_root->node = -ERR. Subsequently the caller does: fail_tree_roots which calls free_root_pointers on the bogus value. Reported-by: Eric Sandeen <sandeen@redhat.com> Fixes: b8522a1e5f42 ("btrfs: Factor out tree roots initialization during mount") CC: stable@vger.kernel.org # 5.5+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add details how the pointer gets dereferenced ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22btrfs: fix corrupt log due to concurrent fsync of inodes with shared extentsFilipe Manana1-1/+4
commit e289f03ea79bbc6574b78ac25682555423a91cbb upstream. When we have extents shared amongst different inodes in the same subvolume, if we fsync them in parallel we can end up with checksum items in the log tree that represent ranges which overlap. For example, consider we have inodes A and B, both sharing an extent that covers the logical range from X to X + 64KiB: 1) Task A starts an fsync on inode A; 2) Task B starts an fsync on inode B; 3) Task A calls btrfs_csum_file_blocks(), and the first search in the log tree, through btrfs_lookup_csum(), returns -EFBIG because it finds an existing checksum item that covers the range from X - 64KiB to X; 4) Task A checks that the checksum item has not reached the maximum possible size (MAX_CSUM_ITEMS) and then releases the search path before it does another path search for insertion (through a direct call to btrfs_search_slot()); 5) As soon as task A releases the path and before it does the search for insertion, task B calls btrfs_csum_file_blocks() and gets -EFBIG too, because there is an existing checksum item that has an end offset that matches the start offset (X) of the checksum range we want to log; 6) Task B releases the path; 7) Task A does the path search for insertion (through btrfs_search_slot()) and then verifies that the checksum item that ends at offset X still exists and extends its size to insert the checksums for the range from X to X + 64KiB; 8) Task A releases the path and returns from btrfs_csum_file_blocks(), having inserted the checksums into an existing checksum item that got its size extended. At this point we have one checksum item in the log tree that covers the logical range from X - 64KiB to X + 64KiB; 9) Task B now does a search for insertion using btrfs_search_slot() too, but it finds that the previous checksum item no longer ends at the offset X, it now ends at an of offset X + 64KiB, so it leaves that item untouched. Then it releases the path and calls btrfs_insert_empty_item() that inserts a checksum item with a key offset corresponding to X and a size for inserting a single checksum (4 bytes in case of crc32c). Subsequent iterations end up extending this new checksum item so that it contains the checksums for the range from X to X + 64KiB. So after task B returns from btrfs_csum_file_blocks() we end up with two checksum items in the log tree that have overlapping ranges, one for the range from X - 64KiB to X + 64KiB, and another for the range from X to X + 64KiB. Having checksum items that represent ranges which overlap, regardless of being in the log tree or in the chekcsums tree, can lead to problems where checksums for a file range end up not being found. This type of problem has happened a few times in the past and the following commits fixed them and explain in detail why having checksum items with overlapping ranges is problematic: 27b9a8122ff71a "Btrfs: fix csum tree corruption, duplicate and outdated checksums" b84b8390d6009c "Btrfs: fix file read corruption after extent cloning and fsync" 40e046acbd2f36 "Btrfs: fix missing data checksums after replaying a log tree" Since this specific instance of the problem can only happen when logging inodes, because it is the only case where concurrent attempts to insert checksums for the same range can happen, fix the issue by using an extent io tree as a range lock to serialize checksum insertion during inode logging. This issue could often be reproduced by the test case generic/457 from fstests. When it happens it produces the following trace: BTRFS critical (device dm-0): corrupt leaf: root=18446744073709551610 block=30625792 slot=42, csum end range (15020032) goes beyond the start range (15015936) of the next csum item BTRFS info (device dm-0): leaf 30625792 gen 7 total ptrs 49 free space 2402 owner 18446744073709551610 BTRFS info (device dm-0): refs 1 lock (w:0 r:0 bw:0 br:0 sw:0 sr:0) lock_owner 0 current 15884 item 0 key (18446744073709551606 128 13979648) itemoff 3991 itemsize 4 item 1 key (18446744073709551606 128 13983744) itemoff 3987 itemsize 4 item 2 key (18446744073709551606 128 13987840) itemoff 3983 itemsize 4 item 3 key (18446744073709551606 128 13991936) itemoff 3979 itemsize 4 item 4 key (18446744073709551606 128 13996032) itemoff 3975 itemsize 4 item 5 key (18446744073709551606 128 14000128) itemoff 3971 itemsize 4 (...) BTRFS error (device dm-0): block=30625792 write time tree block corruption detected ------------[ cut here ]------------ WARNING: CPU: 1 PID: 15884 at fs/btrfs/disk-io.c:539 btree_csum_one_bio+0x268/0x2d0 [btrfs] Modules linked in: btrfs dm_thin_pool ... CPU: 1 PID: 15884 Comm: fsx Tainted: G W 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btree_csum_one_bio+0x268/0x2d0 [btrfs] Code: c7 c7 ... RSP: 0018:ffffbb0109e6f8e0 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffe1c0847b6080 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffaa963988 RDI: 0000000000000001 RBP: ffff956a4f4d2000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000526 R11: 0000000000000000 R12: ffff956a5cd28bb0 R13: 0000000000000000 R14: ffff956a649c9388 R15: 000000011ed82000 FS: 00007fb419959e80(0000) GS:ffff956a7aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000fe6d54 CR3: 0000000138696005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btree_submit_bio_hook+0x67/0xc0 [btrfs] submit_one_bio+0x31/0x50 [btrfs] btree_write_cache_pages+0x2db/0x4b0 [btrfs] ? __filemap_fdatawrite_range+0xb1/0x110 do_writepages+0x23/0x80 __filemap_fdatawrite_range+0xd2/0x110 btrfs_write_marked_extents+0x15e/0x180 [btrfs] btrfs_sync_log+0x206/0x10a0 [btrfs] ? kmem_cache_free+0x315/0x3b0 ? btrfs_log_inode+0x1e8/0xf90 [btrfs] ? __mutex_unlock_slowpath+0x45/0x2a0 ? lockref_put_or_lock+0x9/0x30 ? dput+0x2d/0x580 ? dput+0xb5/0x580 ? btrfs_sync_file+0x464/0x4d0 [btrfs] btrfs_sync_file+0x464/0x4d0 [btrfs] do_fsync+0x38/0x60 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb41953a6d0 Code: 48 3d ... RSP: 002b:00007ffcc86bd218 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fb41953a6d0 RDX: 0000000000000009 RSI: 0000000000040000 RDI: 0000000000000003 RBP: 0000000000040000 R08: 0000000000000001 R09: 0000000000000009 R10: 0000000000000064 R11: 0000000000000246 R12: 0000556cf4b2c060 R13: 0000000000000100 R14: 0000000000000000 R15: 0000556cf322b420 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffa96bdedf>] copy_process+0x74f/0x2020 softirqs last enabled at (0): [<ffffffffa96bdedf>] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace d543fc76f5ad7fd8 ]--- In that trace the tree checker detected the overlapping checksum items at the time when we triggered writeback for the log tree when syncing the log. Another trace that can happen is due to BUG_ON() when deleting checksum items while logging an inode: BTRFS critical (device dm-0): slot 81 key (18446744073709551606 128 13635584) new key (18446744073709551606 128 13635584) BTRFS info (device dm-0): leaf 30949376 gen 7 total ptrs 98 free space 8527 owner 18446744073709551610 BTRFS info (device dm-0): refs 4 lock (w:1 r:0 bw:0 br:0 sw:1 sr:0) lock_owner 13473 current 13473 item 0 key (257 1 0) itemoff 16123 itemsize 160 inode generation 7 size 262144 mode 100600 item 1 key (257 12 256) itemoff 16103 itemsize 20 item 2 key (257 108 0) itemoff 16050 itemsize 53 extent data disk bytenr 13631488 nr 4096 extent data offset 0 nr 131072 ram 131072 (...) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:3153! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 1 PID: 13473 Comm: fsx Not tainted 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x1ea/0x270 [btrfs] Code: 0f b6 ... RSP: 0018:ffff95e3889179d0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000051 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffb7763988 RDI: 0000000000000001 RBP: fffffffffffffff6 R08: 0000000000000000 R09: 0000000000000001 R10: 00000000000009ef R11: 0000000000000000 R12: ffff8912a8ba5a08 R13: ffff95e388917a06 R14: ffff89138dcf68c8 R15: ffff95e388917ace FS: 00007fe587084e80(0000) GS:ffff8913baa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe587091000 CR3: 0000000126dac005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_del_csums+0x2f4/0x540 [btrfs] copy_items+0x4b5/0x560 [btrfs] btrfs_log_inode+0x910/0xf90 [btrfs] btrfs_log_inode_parent+0x2a0/0xe40 [btrfs] ? dget_parent+0x5/0x370 btrfs_log_dentry_safe+0x4a/0x70 [btrfs] btrfs_sync_file+0x42b/0x4d0 [btrfs] __x64_sys_msync+0x199/0x200 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fe586c65760 Code: 00 f7 ... RSP: 002b:00007ffe250f98b8 EFLAGS: 00000246 ORIG_RAX: 000000000000001a RAX: ffffffffffffffda RBX: 00000000000040e1 RCX: 00007fe586c65760 RDX: 0000000000000004 RSI: 0000000000006b51 RDI: 00007fe58708b000 RBP: 0000000000006a70 R08: 0000000000000003 R09: 00007fe58700cb61 R10: 0000000000000100 R11: 0000000000000246 R12: 00000000000000e1 R13: 00007fe58708b000 R14: 0000000000006b51 R15: 0000558de021a420 Modules linked in: dm_log_writes ... ---[ end trace c92a7f447a8515f5 ]--- CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23btrfs: drop logs when we've aborted a transactionJosef Bacik1-4/+32
Dave reported a problem where we were panicing with generic/475 with misc-5.7. This is because we were doing IO after we had stopped all of the worker threads, because we do the log tree cleanup on roots at drop time. Cleaning up the log tree will always need to do reads if we happened to have evicted the blocks from memory. Because of this simply add a helper to btrfs_cleanup_transaction() that will go through and drop all of the log roots. This gets run before we do the close_ctree() work, and thus we are allowed to do any reads that we would need. I ran this through many iterations of generic/475 with constrained memory and I did not see the issue. general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 12359 Comm: umount Tainted: G W 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_queue_work+0x33/0x1c0 [btrfs] RSP: 0018:ffff9cfb015937d8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8eb5e339ed80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8eb5eb33b770 RDI: ffff8eb5e37a0460 RBP: ffff8eb5eb33b770 R08: 000000000000020c R09: ffffffff9fc09ac0 R10: 0000000000000007 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b R13: ffff9cfb00229040 R14: 0000000000000008 R15: ffff8eb5d3868000 FS: 00007f167ea022c0(0000) GS:ffff8eb5fae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f167e5e0cb1 CR3: 0000000138c18004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_end_bio+0x81/0x130 [btrfs] __split_and_process_bio+0xaf/0x4e0 [dm_mod] ? percpu_counter_add_batch+0xa3/0x120 dm_process_bio+0x98/0x290 [dm_mod] ? generic_make_request+0xfb/0x410 dm_make_request+0x4d/0x120 [dm_mod] ? generic_make_request+0xfb/0x410 generic_make_request+0x12a/0x410 ? submit_bio+0x38/0x160 submit_bio+0x38/0x160 ? percpu_counter_add_batch+0xa3/0x120 btrfs_map_bio+0x289/0x570 [btrfs] ? kmem_cache_alloc+0x24d/0x300 btree_submit_bio_hook+0x79/0xc0 [btrfs] submit_one_bio+0x31/0x50 [btrfs] read_extent_buffer_pages+0x2fe/0x450 [btrfs] btree_read_extent_buffer_pages+0x7e/0x170 [btrfs] walk_down_log_tree+0x343/0x690 [btrfs] ? walk_log_tree+0x3d/0x380 [btrfs] walk_log_tree+0xf7/0x380 [btrfs] ? plist_requeue+0xf0/0xf0 ? delete_node+0x4b/0x230 free_log_tree+0x4c/0x130 [btrfs] ? wait_log_commit+0x140/0x140 [btrfs] btrfs_free_log+0x17/0x30 [btrfs] btrfs_drop_and_free_fs_root+0xb0/0xd0 [btrfs] btrfs_free_fs_roots+0x10c/0x190 [btrfs] ? do_raw_spin_unlock+0x49/0xc0 ? _raw_spin_unlock+0x29/0x40 ? release_extent_buffer+0x121/0x170 [btrfs] close_ctree+0x289/0x2e6 [btrfs] generic_shutdown_super+0x6c/0x110 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x3a/0x70 Reported-by: David Sterba <dsterba@suse.com> Fixes: 8c38938c7bb096 ("btrfs: move the root freeing stuff into btrfs_put_root") Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: kill the subvol_srcuJosef Bacik1-28/+9
Now that we have proper root ref counting everywhere we can kill the subvol_srcu. * removal of fs_info::subvol_srcu reduces size of fs_info by 1176 bytes * the refcount_t used for the references checks for accidental 0->1 in cases where the root lifetime would not be properly protected * there's a leak detector for roots to catch unfreed roots at umount time * SRCU served us well over the years but is was not a proper synchronization mechanism for some cases Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: make btrfs_cleanup_fs_roots use the radix tree lockJosef Bacik1-4/+3
The radix root is primarily protected by the fs_roots_radix_lock, so use that to lookup and get a ref on all of our fs roots in btrfs_cleanup_fs_roots. The tree reference is taken in the protected section as before. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: don't take an extra root ref at allocation timeJosef Bacik1-14/+6
Now that all the users of roots take references for them we can drop the extra root ref we've been taking. Before we had roots at 2 refs for the life of the file system, one for the radix tree, and one simply for existing. Now that we have proper ref accounting in all places that use roots we can drop this extra ref simply for existing as we no longer need it. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: hold a ref on the root on the dead roots listJosef Bacik1-2/+1
At the point we add a root to the dead roots list we have no open inodes for that root, so we need to hold a ref on that root to keep it from disappearing. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: make inodes hold a ref on their rootsJosef Bacik1-1/+1
If we make sure all the inodes have refs on their root we don't have to worry about the root disappearing while we have open inodes. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: move the root freeing stuff into btrfs_put_rootJosef Bacik1-31/+32
There are a few different ways to free roots, either you allocated them yourself and you just do free_extent_buffer(root->node); free_extent_buffer(root->commit_node); btrfs_put_root(root); Which is the pattern for log roots. Or for snapshots/subvolumes that are being dropped you simply call btrfs_free_fs_root() which does all the cleanup for you. Unify this all into btrfs_put_root(), so that we don't free up things associated with the root until the last reference is dropped. This makes the root freeing code much more significant. The only caveat is at close_ctree() time we have to free the extent buffers for all of our main roots (extent_root, chunk_root, etc) because we have to drop the btree_inode and we'll run into issues if we hold onto those nodes until ->kill_sb() time. This will be addressed in the future when we kill the btree_inode. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: move ino_cache_inode dropping out of btrfs_free_fs_rootJosef Bacik1-1/+4
We are going to make root life be controlled soley by refcounting, and inodes will be one of the things that hold a ref on the root. This means we need to handle dropping the ino_cache_inode outside of the root freeing logic, so move it into btrfs_drop_and_free_fs_root() so it is cleaned up properly on unmount. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: make the extent buffer leak check per fs infoJosef Bacik1-0/+3
I'm going to make the entire destruction of btrfs_root's controlled by their refcount, so it will be helpful to notice if we're leaking their eb's on umount. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: return void from csum_tree_blockDavid Sterba1-10/+3
Now that csum_tree_block is not returning any errors, we can make csum_tree_block return void and simplify callers. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: simplify tree block checksumming loopDavid Sterba1-24/+8
Thw whole point of csum_tree_block is to iterate over all extent buffer pages and pass it to checksumming functions. The bytes where checksum is stored must be skipped, thus map_private_extent_buffer. This complicates further offset calculations. As the first page will be always present, checksum the relevant bytes unconditionally and then do a simple iteration over the remaining pages. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23Btrfs: fix crash during unmount due to race with delayed inode workersFilipe Manana1-0/+13
During unmount we can have a job from the delayed inode items work queue still running, that can lead to at least two bad things: 1) A crash, because the worker can try to create a transaction just after the fs roots were freed; 2) A transaction leak, because the worker can create a transaction before the fs roots are freed and just after we committed the last transaction and after we stopped the transaction kthread. A stack trace example of the crash: [79011.691214] kernel BUG at lib/radix-tree.c:982! [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G W 5.6.0-rc2-btrfs-next-54 #2 (...) [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs] [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170 (...) [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001 [79011.709270] FS: 0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000 [79011.710699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [79011.715448] Call Trace: [79011.715925] record_root_in_trans+0x72/0xf0 [btrfs] [79011.716819] btrfs_record_root_in_trans+0x4b/0x70 [btrfs] [79011.717925] start_transaction+0xdd/0x5c0 [btrfs] [79011.718829] btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs] [79011.719915] btrfs_work_helper+0xaa/0x720 [btrfs] [79011.720773] process_one_work+0x26d/0x6a0 [79011.721497] worker_thread+0x4f/0x3e0 [79011.722153] ? process_one_work+0x6a0/0x6a0 [79011.722901] kthread+0x103/0x140 [79011.723481] ? kthread_create_worker_on_cpu+0x70/0x70 [79011.724379] ret_from_fork+0x3a/0x50 (...) The following diagram shows a sequence of steps that lead to the crash during ummount of the filesystem: CPU 1 CPU 2 CPU 3 btrfs_punch_hole() btrfs_btree_balance_dirty() btrfs_balance_delayed_items() --> sees fs_info->delayed_root->items with value 200, which is greater than BTRFS_DELAYED_BACKGROUND (128) and smaller than BTRFS_DELAYED_WRITEBACK (512) btrfs_wq_run_delayed_node() --> queues a job for fs_info->delayed_workers to run btrfs_async_run_delayed_root() btrfs_async_run_delayed_root() --> job queued by CPU 1 --> starts picking and running delayed nodes from the prepare_list list close_ctree() btrfs_delete_unused_bgs() btrfs_commit_super() btrfs_join_transaction() --> gets transaction N btrfs_commit_transaction(N) --> set transaction state to TRANTS_STATE_COMMIT_START btrfs_first_prepared_delayed_node() --> picks delayed node X through the prepared_list list btrfs_run_delayed_items() btrfs_first_delayed_node() --> also picks delayed node X but through the node_list list __btrfs_commit_inode_delayed_items() --> runs all delayed items from this node and drops the node's item count to 0 through call to btrfs_release_delayed_inode() --> finishes running any remaining delayed nodes --> finishes transaction commit --> stops cleaner and transaction threads btrfs_free_fs_roots() --> frees all roots and removes them from the radix tree fs_info->fs_roots_radix btrfs_join_transaction() start_transaction() btrfs_record_root_in_trans() record_root_in_trans() radix_tree_tag_set() --> crashes because the root is not in the radix tree anymore If the worker is able to call btrfs_join_transaction() before the unmount task frees the fs roots, we end up leaking a transaction and all its resources, since after the call to btrfs_commit_super() and stopping the transaction kthread, we don't expect to have any transaction open anymore. When this situation happens the worker has a delayed node that has no more items to run, since the task calling btrfs_run_delayed_items(), which is doing a transaction commit, picks the same node and runs all its items first. We can not wait for the worker to complete when running delayed items through btrfs_run_delayed_items(), because we call that function in several phases of a transaction commit, and that could cause a deadlock because the worker calls btrfs_join_transaction() and the task doing the transaction commit may have already set the transaction state to TRANS_STATE_COMMIT_DOING. Also it's not possible to get into a situation where only some of the items of a delayed node are added to the fs/subvolume tree in the current transaction and the remaining ones in the next transaction, because when running the items of a delayed inode we lock its mutex, effectively waiting for the worker if the worker is running the items of the delayed node already. Since this can only cause issues when unmounting a filesystem, fix it in a simple way by waiting for any jobs on the delayed workers queue before calling btrfs_commit_supper() at close_ctree(). This works because at this point no one can call btrfs_btree_balance_dirty() or btrfs_balance_delayed_items(), and if we end up waiting for any worker to complete, btrfs_commit_super() will commit the transaction created by the worker. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: switch to use new generic UUID APIAndy Shevchenko1-3/+3
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: reduce pointer intdirections in btree_readpage_end_io_hookDavid Sterba1-3/+4
All we need to read is checksum size from fs_info superblock, and fs_info is provided by extent buffer so we can get rid of the wild pointer indirections from page/inode/root. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: adjust delayed refs message levelDavid Sterba1-1/+1
The message seems to be for debugging and has little value for users. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: open code trivial helper btrfs_header_chunk_tree_uuidDavid Sterba1-1/+2
The helper btrfs_header_chunk_tree_uuid follows naming convention of other struct accessors but does something compeletly different. As the offsetof calculation is clear in the context of extent buffer operations we can remove it. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: open code trivial helper btrfs_header_fsidDavid Sterba1-2/+4
The helper btrfs_header_fsid follows naming convention of other struct accessors but does something compeletly different. As the offsetof calculation is clear in the context of extent buffer operations we can remove it. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: convert snapshot/nocow exlcusion to drew lockNikolay Borisov1-35/+10
This patch removes all haphazard code implementing nocow writers exclusion from pending snapshot creation and switches to using the drew lock to ensure this invariant still holds. 'Readers' are snapshot creators from create_snapshot and 'writers' are nocow writers from buffered write path or btrfs_setsize. This locking scheme allows for multiple snapshots to happen while any nocow writers are blocked, since writes to page cache in the nocow path will make snapshots inconsistent. So for performance reasons we'd like to have the ability to run multiple concurrent snapshots and also favors readers in this case. And in case there aren't pending snapshots (which will be the majority of the cases) we rely on the percpu's writers counter to avoid cacheline contention. The main gain from using the drew lock is it's now a lot easier to reason about the guarantees of the locking scheme and whether there is some silent breakage lurking. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: set update the uuid generation as soon as possibleJosef Bacik1-2/+12
In my EIO stress testing I noticed I was getting forced to rescan the uuid tree pretty often, which was weird. This is because my error injection stuff would sometimes inject an error after log replay but before we loaded the UUID tree. If log replay committed the transaction it wouldn't have updated the uuid tree generation, but the tree was valid and didn't change, so there's no reason to not update the generation here. Fix this by setting the BTRFS_FS_UPDATE_UUID_TREE_GEN bit immediately after reading all the fs roots if the uuid tree generation matches the fs generation. Then any transaction commits that happen during mount won't screw up our uuid tree state, forcing us to do needless uuid rescans. Fixes: 70f801754728 ("Btrfs: check UUID tree during mount if required") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: bail out of uuid tree scanning if we're closingJosef Bacik1-1/+3
In doing my fsstress+EIO stress testing I started running into issues where umount would get stuck forever because the uuid checker was chewing through the thousands of subvolumes I had created. We shouldn't block umount on this, simply bail if we're unmounting the fs. We need to make sure we don't mark the UUID tree as ok, so we only set that bit if we made it through the whole rescan operation, but otherwise this is completely safe. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: make btrfs_check_uuid_tree private to disk-io.cNikolay Borisov1-0/+35
It's used only during filesystem mount as such it can be made private to disk-io.c file. Also use the occasion to move btrfs_uuid_rescan_kthread as btrfs_check_uuid_tree is its sole caller. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: use bios instead of buffer_heads from super block writeoutJohannes Thumshirn1-54/+73
Similar to the superblock read path, change the write path to using bios and pages instead of buffer_heads. This allows us to skip over the buffer_head code, for writing the superblock to disk. This is based on a patch originally authored by Nikolay Borisov. Co-developed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: use the page cache for super block readingJohannes Thumshirn1-43/+31
Super-block reading in BTRFS is done using buffer_heads. Buffer_heads have some drawbacks, like not being able to propagate errors from the lower layers. Directly use the page cache for reading the super blocks from disk or invalidating an on-disk super block. We have to use the page cache so to avoid races between mkfs and udev. See also 6f60cbd3ae44 ("btrfs: access superblock via pagecache in scan_one_device"). This patch unwraps the buffer head API and does not change the way the super block is actually read. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: switch to per-transaction pinned extentsNikolay Borisov1-25/+5
This commit flips the switch to start tracking/processing pinned extents on a per-transaction basis. It mostly replaces all references from btrfs_fs_info::(pinned_extents|freed_extents[]) to btrfs_transaction::pinned_extents. Two notable modifications that warrant explicit mention are changing clean_pinned_extents to get a reference to the previously running transaction. The other one is removal of call to btrfs_destroy_pinned_extent since transactions are going to be cleaned in btrfs_cleanup_one_transaction. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: Perform pinned cleanup directly in btrfs_destroy_delayed_refsNikolay Borisov1-3/+25
Having btrfs_destroy_delayed_refs call btrfs_pin_extent is problematic for making pinned extents tracking per-transaction since btrfs_trans_handle cannot be passed to btrfs_pin_extent in this context. Additionally delayed refs heads pinned in btrfs_destroy_delayed_refs are going to be handled very closely, in btrfs_destroy_pinned_extent. To enable btrfs_pin_extent to take btrfs_trans_handle simply open code it in btrfs_destroy_delayed_refs and call btrfs_error_unpin_extent_range on the range. This enables us to do less work in btrfs_destroy_pinned_extent and leaves btrfs_pin_extent being called in contexts which have a valid btrfs_trans_handle. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: sink argument tree to extent_read_full_pageDavid Sterba1-3/+1
The tree pointer can be safely read from the page's inode, use it and drop the redundant argument. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: rename btrfs_put_fs_root and btrfs_grab_fs_rootJosef Bacik1-39/+39
We are now using these for all roots, rename them to btrfs_put_root() and btrfs_grab_root(); Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: add a leak check for rootsJosef Bacik1-0/+28
Now that we're going to start relying on getting ref counting right for roots, add a list to track allocated roots and print out any roots that aren't freed up at free_fs_info time. Hide this behind CONFIG_BTRFS_DEBUG because this will just be used for developers to verify they aren't breaking things. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: make the init of static elements in fs_info separateJosef Bacik1-8/+11
In adding things like eb leak checking and root leak checking there were a lot of weird corner cases that come from the fact that 1) We do not init the fs_info until we get to open_ctree time in the normal case and 2) The test infrastructure half-init's the fs_info for things that it needs. This makes it really annoying to make changes because you have to add init in two different places, have special cases for testing fs_info's that may not have certain things initialized, and cases for fs_info's that didn't make it to open_ctree and thus are not fully set up. Fix this by extracting out the non-allocating init of the fs info into it's own public function and use that to make sure we're all getting consistent views of an allocated fs_info. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: move fs_info init work into it's own helper functionJosef Bacik1-81/+84
open_ctree mixes initialization of fs stuff and fs_info stuff, which makes it confusing when doing things like adding the root leak detection. Make a separate function that inits all the static structures inside of the fs_info needed for the fs to operate, and then call that before we start setting up the fs_info to be mounted. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: free more things in btrfs_free_fs_infoJosef Bacik1-36/+24
Things like the percpu_counters, the mapping_tree, and the csum hash can all be freed at btrfs_free_fs_info time, since the helpers all check if the structure has been initialized already. This significantly cleans up the error cases in open_ctree. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: push btrfs_grab_fs_root into btrfs_get_fs_rootJosef Bacik1-19/+26
Now that all callers of btrfs_get_fs_root are subsequently calling btrfs_grab_fs_root and handling dropping the ref when they are done appropriately, go ahead and push btrfs_grab_fs_root up into btrfs_get_fs_root. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: use btrfs_put_fs_root to free roots alwaysJosef Bacik1-15/+15
If we are going to track leaked roots we need to free them all the same way, so don't kfree() roots directly, use btrfs_put_fs_root. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: hold a ref on the root in open_ctreeJosef Bacik1-0/+8
We lookup the fs_root and put it in our fs_info directly, we should hold a ref on this root for the lifetime of the fs_info. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: export and rename free_fs_infoJosef Bacik1-0/+18
We're going to start freeing roots and doing other complicated things in free_fs_info, so we need to move it to disk-io.c and export it in order to use things lik btrfs_put_fs_root(). Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: hold a ref on fs roots while they're in the radix treeJosef Bacik1-1/+5
If the root is sitting in the radix tree, we should probably have a ref for the radix tree. Grab a ref on the root when we insert it, and drop it when it gets deleted. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: make the fs root init functions staticJosef Bacik1-3/+3
Now that the orphan cleanup stuff doesn't use this directly we can just make them static. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: open code btrfs_read_fs_root_no_nameJosef Bacik1-1/+1
All this does is call btrfs_get_fs_root() with check_ref == true. Just use btrfs_get_fs_root() so we don't have a bunch of different helpers that do the same thing. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: remove btrfs_read_fs_root, not used anymoreJosef Bacik1-12/+1
All helpers should either be using btrfs_get_fs_root() or btrfs_read_tree_root(). Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: export and use btrfs_read_tree_root for tree-logJosef Bacik1-2/+2
Tree-log uses btrfs_read_fs_root to load its log, but this just calls btrfs_read_tree_root. We don't save the log roots in our root cache, so just export this helper and use it in the logging code. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: move fs root init stuff into btrfs_init_fs_rootJosef Bacik1-6/+5
We have a helper for reading fs roots that just reads the fs root off the disk and then sets REF_COWS and init's the inheritable flags. Move this into btrfs_init_fs_root so we can later get rid of this helper and consolidate all of the fs root reading into one helper. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23btrfs: push __setup_root into btrfs_alloc_rootJosef Bacik1-21/+15
There's no reason to not init the root at alloc time, and with later patches it actually causes problems if we error out mounting the fs before the tree_root is init'ed because we expect it to have a valid ref count. Fix this by pushing __setup_root into btrfs_alloc_root. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-19btrfs: do not check delayed items are empty for single transaction cleanupJosef Bacik1-1/+0
btrfs_assert_delayed_root_empty() will check if the delayed root is completely empty, but this is a filesystem-wide check. On cleanup we may have allowed other transactions to begin, for whatever reason, and thus the delayed root is not empty. So remove this check from cleanup_one_transation(). This however can stay in btrfs_cleanup_transaction(), because it checks only after all of the transactions have been properly cleaned up, and thus is valid. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-19btrfs: reset fs_root to NULL on error in open_ctreeJosef Bacik1-0/+1
While running my error injection script I hit a panic when we tried to clean up the fs_root when freeing the fs_root. This is because fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by setting fs_info->fs_root = NULL; if we fail to read the root. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-19btrfs: destroy qgroup extent records on transaction abortJeff Mahoney1-0/+1
We clean up the delayed references when we abort a transaction but we leave the pending qgroup extent records behind, leaking memory. This patch destroys the extent records when we destroy the delayed refs and makes sure ensure they're gone before releasing the transaction. Fixes: 3368d001ba5d ("btrfs: qgroup: Record possible quota-related extent for qgroup.") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> [ Rebased to latest upstream, remove to_qgroup() helper, use rbtree_postorder_for_each_entry_safe() wrapper ] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-12btrfs: print message when tree-log replay startsDavid Sterba1-0/+1
There's no logged information about tree-log replay although this is something that points to previous unclean unmount. Other filesystems report that as well. Suggested-by: Chris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-31Btrfs: fix race between adding and putting tree mod seq elements and nodesFilipe Manana1-1/+0
There is a race between adding and removing elements to the tree mod log list and rbtree that can lead to use-after-free problems. Consider the following example that explains how/why the problems happens: 1) Task A has mod log element with sequence number 200. It currently is the only element in the mod log list; 2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to access the tree mod log. When it enters the function, it initializes 'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock' before checking if there are other elements in the mod seq list. Since the list it empty, 'min_seq' remains set to (u64)-1. Then it unlocks the lock 'tree_mod_seq_lock'; 3) Before task A acquires the lock 'tree_mod_log_lock', task B adds itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a sequence number of 201; 4) Some other task, name it task C, modifies a btree and because there elements in the mod seq list, it adds a tree mod elem to the tree mod log rbtree. That node added to the mod log rbtree is assigned a sequence number of 202; 5) Task B, which is doing fiemap and resolving indirect back references, calls btrfs get_old_root(), with 'time_seq' == 201, which in turn calls tree_mod_log_search() - the search returns the mod log node from the rbtree with sequence number 202, created by task C; 6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating the mod log rbtree and finds the node with sequence number 202. Since 202 is less than the previously computed 'min_seq', (u64)-1, it removes the node and frees it; 7) Task B still has a pointer to the node with sequence number 202, and it dereferences the pointer itself and through the call to __tree_mod_log_rewind(), resulting in a use-after-free problem. This issue can be triggered sporadically with the test case generic/561 from fstests, and it happens more frequently with a higher number of duperemove processes. When it happens to me, it either freezes the VM or it produces a trace like the following before crashing: [ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1 [ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 1245.321287] RIP: 0010:rb_next+0x16/0x50 [ 1245.321307] Code: .... [ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202 [ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b [ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80 [ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000 [ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038 [ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8 [ 1245.321539] FS: 00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000 [ 1245.321591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0 [ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1245.321706] Call Trace: [ 1245.321798] __tree_mod_log_rewind+0xbf/0x280 [btrfs] [ 1245.321841] btrfs_search_old_slot+0x105/0xd00 [btrfs] [ 1245.321877] resolve_indirect_refs+0x1eb/0xc60 [btrfs] [ 1245.321912] find_parent_nodes+0x3dc/0x11b0 [btrfs] [ 1245.321947] btrfs_check_shared+0x115/0x1c0 [btrfs] [ 1245.321980] ? extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322029] extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322066] do_vfs_ioctl+0x45a/0x750 [ 1245.322081] ksys_ioctl+0x70/0x80 [ 1245.322092] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1245.322113] __x64_sys_ioctl+0x16/0x20 [ 1245.322126] do_syscall_64+0x5c/0x280 [ 1245.322139] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1245.322155] RIP: 0033:0x7fdee3942dd7 [ 1245.322177] Code: .... [ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7 [ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004 [ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44 [ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48 [ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50 [ 1245.322423] Modules linked in: .... [ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]--- Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum sequence number and iterates the rbtree while holding the lock 'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock' lock, since it is now redundant. Fixes: bd989ba359f2ac ("Btrfs: add tree modification log functions") Fixes: 097b8a7c9e48e2 ("Btrfs: join tree mod log code with the code holding back delayed refs") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-21 15:52:39 +0300