| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit d651ce8e917fa1bf6cfab8dca74c512edffc35d3 upstream.
During SYS_ERR condition, as a response to the MHI_RESET from host, some
devices tend to issue BHI interrupt without clearing the SYS_ERR state in
the device. This creates a race condition and causes a failure in booting
up the device.
The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
handling in mhi_async_power_up(). Once the host detects that the device
is in SYS_ERR state, it issues MHI_RESET and waits for the device to
process the reset request. During this time, the device triggers the BHI
interrupt to the host without clearing SYS_ERR condition. So the host
starts handling the SYS_ERR condition again.
To fix this issue, let's register the IRQ handler only after handling the
SYS_ERR check to avoid getting spurious IRQs from the device.
Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up")
Cc: stable@vger.kernel.org
Reported-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42c4668f7efe1485dfc382517b412c0c6ab102b8 upstream.
The 'wake-capable' entry in channel configuration is not set when
parsing the configuration specified by the controller driver. Add
the missing entry to ensure channel is correctly specified as a
'wake-capable' channel.
Link: https://lore.kernel.org/r/1638320491-13382-1-git-send-email-quic_bbhatt@quicinc.com
Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f77097ec8c0141a4b5cf3722a246be0cb5677e29 upstream.
There is no reason for shutting down MHI ungracefully on freeze,
this causes the MHI host stack & device stack to not be aligned
anymore since the proper MHI reset sequence is not performed for
ungraceful shutdown.
Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Cc: stable@vger.kernel.org
Suggested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.
On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.
Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 00 00 00 00 .long 0x0
Add the contents flag in order to keep the content of the section
while renaming it.
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 4e 80 00 20 blr
Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9020ef659885f2622cfb386cc229b6d618362895 upstream.
IIO triggers are software IRQ chips that split an incoming IRQ into
separate IRQs routed to all devices using the trigger.
When all consumers are done then a trigger callback reenable() is
called. There are a few circumstances under which this can happen
in atomic context.
1) A single user of the trigger that calls the iio_trigger_done()
function from interrupt context.
2) A race between disconnecting the last device from a trigger and
the trigger itself sucessfully being disabled.
To avoid a resulting scheduling whilst atomic, close this second corner
by using schedule_work() to ensure the reenable is not done in atomic
context.
Note that drivers must be careful to manage the interaction of
set_state() and reenable() callbacks to ensure appropriate reference
counting if they are relying on the same hardware controls.
Deliberately taking this the slow path rather than via a fixes tree
because the error has hard to hit and I would like it to soak for a while
before hitting a release kernel.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211017172209.112387-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9791a94384af07592d29504004d2255dbaf8663 upstream.
Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.
Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.
Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.
Reported-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw>
Fixes: c458b7ca3fd0 ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw> #UP-extremei11
Link: https://lore.kernel.org/r/20211205172728.2826512-1-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b0b80ac103b2a40c72a47c301745fd1f4ef4697 upstream.
Don't blindly copy status value received from the firmware
into internal client status field,
It may be positive and ERR_PTR(ret) will translate it
into an invalid address and the caller will crash.
Put the error code into the client status on failure.
Fixes: 369aea845951 ("mei: implement client dma setup.")
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: : Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211228082047.378115-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.
In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).
Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org
Cc: stable@vger.kernel.org # 2.6.38
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 713bdfa10b5957053811470d298def9537d9ff13 upstream.
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: stable@vger.kernel.org # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org # 2.6.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.
This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.
Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.
The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.
Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.
Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org
Cc: stable@vger.kernel.org
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <michael.kuron@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout define for the five-second
timeouts.
Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: stable@vger.kernel.org # 2.6.17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: stable@vger.kernel.org # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.
Also note that two of the timeout defines are currently unused.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd9d9377ed235b294a492a094e1666178a5e78fd upstream.
If V4L2_CAP_READWRITE is not set, then readbuffers must be set to 0,
otherwise v4l2-compliance will complain.
A note on the Fixes tag below: this patch does not really fix that commit,
but it can be applied from that commit onwards. For older code there is no
guarantee that device_caps is set, so even though this patch would apply,
it will not work reliably.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 049e684f2de9 (media: v4l2-dev: fix WARN_ON(!vdev->device_caps))
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbe0b3af73bf72fad197756f026084404e2bcdc7 upstream.
If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.
Fix this by disabling only clocks and regulators that were enabled
previously.
Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9e6107616bb8108aa4fc22584a05e69761a91f7 upstream.
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 020a45aff1190c32b1087cd75b57fbf6bff46ea6 upstream.
Existing genphy_loopback() is not applicable for Marvell PHY. Besides
configuring bit-6 and bit-13 in Page 0 Register 0 (Copper Control
Register), it is also required to configure same bits in Page 2
Register 21 (MAC Specific Control Register 2) according to speed of
the loopback is operating.
Tested working on Marvell88E1510 PHY for all speeds (1000/100/10Mbps).
FIXME: Based on trial and error test, it seem 1G need to have delay between
soft reset and loopback enablement.
Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.
Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.
Use spin_lock_irq() like the rest of the function.
Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0171480007d64f663aae9226303f1b1e4621229e upstream.
The ECC engine on the JZ4740 SoC requires the ECC data to be read before
the page; using the default page reading function does not work. Indeed,
the old JZ4740 NAND driver (removed in 5.4) did use the 'OOB first' flag
that existed back then.
Use the newly created nand_read_page_hwecc_oob_first() to address this
issue.
This issue was not found when the new ingenic-nand driver was developed,
most likely because the Device Tree used had the nand-ecc-mode set to
"hw_oob_first", which seems to not be supported anymore.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8466f73010faf71effb21228ae1cbf577dab130 upstream.
Move the function nand_read_page_hwecc_oob_first() (previously
nand_davinci_read_page_hwecc_oob_first()) to nand_base.c, and export it
as a GPL symbol, so that it can be used by more modules.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-4-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0697f8441faad552fbeb02d74454b5e7bcc956a2 upstream.
The original comment that describes the function
nand_davinci_read_page_hwecc_oob_first() is very obscure and it is hard
to understand what it is for.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-3-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c9d709965385de5a99f84b14bd5860e1541729e upstream.
The function nand_davinci_read_page_hwecc_oob_first() first reads the
OOB data, extracts the ECC information, programs the ECC hardware before
reading the actual data in a loop.
Right after the OOB data was read, it called nand_read_page_op() to
reset the read cursor to the beginning of the page. This caused the
first page to be read twice: in that call, and later in the loop.
Address that issue by changing the call to nand_read_page_op() to
nand_change_read_column_op(), which will only reset the read cursor.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71e89591502d737c10db2bd4d8fcfaa352552afb upstream.
The function nand_davinci_read_page_hwecc_oob_first() does read the ECC
data from the OOB area. Therefore it does not need to calculate the ECC
as it is already available.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2966daf7d253d9904b337b040dd7a43472858b8a upstream.
Not the child partition should be removed from the partition list
but the partition itself. Otherwise the partition list gets broken
and any subsequent remove operations leads to a kernel panic.
Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102172604.2921065-1-andreas.oetken@siemens-energy.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.
There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f53d4c109a666bf1a4883b45d546fba079258717 upstream.
gpmi_io clock needs to be gated off when changing the parent/dividers of
enfc_clk_root (i.MX6Q/i.MX6UL) respectively qspi2_clk_root (i.MX6SX).
Otherwise this rate change can lead to an unresponsive GPMI core which
results in DMA timeouts and failed driver probe:
[ 4.072318] gpmi-nand 112000.gpmi-nand: DMA timeout, last DMA
...
[ 4.370355] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -110
...
[ 4.375988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.381524] gpmi-nand 112000.gpmi-nand: Error in ECC-based read: -22
[ 4.387988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.393535] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
...
Other than stated in i.MX 6 erratum ERR007117, it should be sufficient
to gate only gpmi_io because all other bch/nand clocks are derived from
different clock roots.
The i.MX6 reference manuals state that changing clock muxers can cause
glitches but are silent about changing dividers. But tests showed that
these glitches can definitely happen on i.MX6ULL. For i.MX7D/8MM in turn,
the manual guarantees that no glitches can happen when changing
dividers.
Co-developed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-2-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.
If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.
This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.
Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df03e9bd6d4806619b4cdc91a3d7695818a8e2b7 upstream.
AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.
This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 546e41ac994cc185ef3de610ca849a294b5df3ba upstream.
These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.
Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ea5763fb79ed89b3bdad455ebf3f33416a81624 upstream.
uhid has to run hid_add_device() from workqueue context while allowing
parallel use of the userspace API (which is protected with ->devlock).
But hid_add_device() can fail. Currently, that is handled by immediately
destroying the associated HID device, without using ->devlock - but if
there are concurrent requests from userspace, that's wrong and leads to
NULL dereferences and/or memory corruption (via use-after-free).
Fix it by leaving the HID device as-is in the worker. We can clean it up
later, either in the UHID_DESTROY command handler or in the ->release()
handler.
Cc: stable@vger.kernel.org
Fixes: 67f8ecc550b5 ("HID: uhid: fix timeout when probe races with IO")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f3193ea1b6779023334faa72b214ece457e02656 upstream.
Battery status on Elan tablet driver is reported for the HP ENVY x360
15t-dr100. There is no separate battery for the Elan controller resulting in a
battery level report of 0% or 1% depending on whether a stylus has interacted
with the screen. These low battery level reports causes a variety of bad
behavior in desktop environments. This patch adds the appropriate quirk to
indicate that the batery status is unused for this target.
Cc: stable@vger.kernel.org
Signed-off-by: Karl Kurbjun <kkurbjun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 603362b4a58393061dcfed1c7f0d0fd4aba61126 upstream.
drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set
in order to compile.
drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required
This patch avoids the #error output by enforcing the policy in
Kconfig. Not sure if this is the right approach, but it helps doing
randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org
Cc: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47a1db8e797da01a1309bf42e0c0d771d4e4d4f3 upstream.
An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).
Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.
Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().
Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3e305592d69e21e36b76d24ca3c01971a2d09be upstream.
Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
a kobject leak in the file registration helper by properly calling
kobject_put() for the entry in case registration of the object fails
(e.g. due to a name collision).
This would however result in a NULL pointer dereference when the
release function tries to remove the never added entry from the
fw_cfg_entry_cache list.
Fix this by moving the list-removal out of the release function.
Note that the offending commit was one of the benign looking umn.edu
fixes which was reviewed but not reverted. [1][2]
[1] https://lore.kernel.org/r/202105051005.49BFABCE@keescook
[2] https://lore.kernel.org/all/YIg7ZOZvS3a8LjSv@kroah.com
Fixes: fe3c60684377 ("firmware: Fix a reference count leak.")
Cc: stable@vger.kernel.org # 5.8
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-2-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b656e9aad7f4886ed466094d1dc5ee4dd900d20 upstream.
Make sure to always NUL-terminate file names retrieved from the firmware
to avoid accessing data beyond the entry slab buffer and exposing it
through sysfs in case the firmware data is corrupt.
Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-4-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
interrupts enabled
commit 8b144dedb928e4e2f433a328d58f44c3c098d63e upstream.
Syzbot reports the following WARNING:
[200~raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10
warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10
Hardware initialization for the rtl8188cu can run for as long as 350 ms,
and the routine may be called with interrupts disabled. To avoid locking
the machine for this long, the current routine saves the interrupt flags
and enables local interrupts. The problem is that it restores the flags
at the end without disabling local interrupts first.
This patch fixes commit a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long
disable of IRQs").
Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8aa637bf6d70d2fb2ad4d708d8b9dd02b1c095df upstream.
Add the missing bulk-endpoint max-packet sanity check to
uvc_video_start_transfer() to avoid division by zero in
uvc_alloc_urb_buffers() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Cc: stable@vger.kernel.org # 2.6.26
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0499f419b76f94ede08304aad5851144813ac55c upstream.
The vga16fb framebuffer driver only supports Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.
But it doesn't check if the adapter is one of those or if a VGA16 mode
is used. This means that the driver will be probed even if a VESA BIOS
Extensions (VBE) or Graphics Output Protocol (GOP) interface is used.
This issue has been present for a long time but it was only exposed by
commit d391c5827107 ("drivers/firmware: move x86 Generic System
Framebuffers support") since the platform device registration to match
the {vesa,efi}fb drivers is done later as a consequence of that change.
All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the supported video mode check for x86 and not for other arches.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215001
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Kris Karas <bugs-a21@moonlit-rail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-3-javierm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd585d9bfbf06fd08a6326c82978be1f06e7d1bd upstream.
Add missing power-domain "mxc" required by CDSP PAS remoteproc on SM8350
SoC.
Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Cc: stable@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1624559605-29847-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fdc12231d885119cc2e2b4f3e0fbba3155f37a56 upstream.
If the string passed into qcom_pil_info_store() isn't as long as
PIL_RELOC_NAME_LEN we'll try to copy the string assuming the length is
PIL_RELOC_NAME_LEN to the io space and go beyond the bounds of the
string. Let's only copy as many byes as the string is long, ignoring the
NUL terminator.
This fixes the following KASAN error:
BUG: KASAN: global-out-of-bounds in __memcpy_toio+0x124/0x140
Read of size 1 at addr ffffffd35086e386 by task rmtfs/2392
CPU: 2 PID: 2392 Comm: rmtfs Tainted: G W 5.16.0-rc1-lockdep+ #10
Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
Call trace:
dump_backtrace+0x0/0x410
show_stack+0x24/0x30
dump_stack_lvl+0x7c/0xa0
print_address_description+0x78/0x2bc
kasan_report+0x160/0x1a0
__asan_report_load1_noabort+0x44/0x50
__memcpy_toio+0x124/0x140
qcom_pil_info_store+0x298/0x358 [qcom_pil_info]
q6v5_start+0xdf0/0x12e0 [qcom_q6v5_mss]
rproc_start+0x178/0x3a0
rproc_boot+0x5f0/0xb90
state_store+0x78/0x1bc
dev_attr_store+0x70/0x90
sysfs_kf_write+0xf4/0x118
kernfs_fop_write_iter+0x208/0x300
vfs_write+0x55c/0x804
ksys_pwrite64+0xc8/0x134
__arm64_compat_sys_aarch32_pwrite64+0xc4/0xdc
invoke_syscall+0x78/0x20c
el0_svc_common+0x11c/0x1f0
do_el0_svc_compat+0x50/0x60
el0_svc_compat+0x5c/0xec
el0t_32_sync_handler+0xc0/0xf0
el0t_32_sync+0x1a4/0x1a8
The buggy address belongs to the variable:
.str.59+0x6/0xffffffffffffec80 [qcom_q6v5_mss]
Memory state around the buggy address:
ffffffd35086e280: 00 00 00 00 02 f9 f9 f9 f9 f9 f9 f9 00 00 00 00
ffffffd35086e300: 00 02 f9 f9 f9 f9 f9 f9 00 00 00 06 f9 f9 f9 f9
>ffffffd35086e380: 06 f9 f9 f9 05 f9 f9 f9 00 00 00 00 00 06 f9 f9
^
ffffffd35086e400: f9 f9 f9 f9 01 f9 f9 f9 04 f9 f9 f9 00 00 01 f9
ffffffd35086e480: f9 f9 f9 f9 00 00 00 00 00 00 00 01 f9 f9 f9 f9
Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211117065454.4142936-1-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63ad5371cd1e379519395c49a4b6a652c36c98e5 upstream.
When UBSAN is enabled a case is shown on unplugging the display that
this variable hasn't been initialized by `update_dsc_caps`, presumably
when the display was unplugged it wasn't copied from the DPCD.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1956497
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6097180d884ddab769fb25588ea8598589c218c upstream.
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.
Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".
This patch restores the "remount" effect by calling reconfigure_single()
Fixes: d401727ea0d7 ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 144779edf598e0896302c35a0926ef0b68f17c4b upstream.
clang warns about excessive stack usage in this driver when
UBSAN is enabled:
drivers/staging/greybus/audio_topology.c:977:12: error: stack frame size of 1836 bytes in function 'gbaudio_tplg_create_widget' [-Werror,-Wframe-larger-than=]
Rework this code to no longer use compound literals for
initializing the structure in each case, but instead keep
the common bits in a preallocated constant array and copy
them as needed.
Link: https://github.com/ClangBuiltLinux/linux/issues/1535
Link: https://lore.kernel.org/r/20210103223541.2790855-1-arnd@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nathan: Address review comments from v1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211209195141.1165233-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e70570656adfe1c5d9a29940faa348d5f132199 upstream.
A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean types:
drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This construct is intentional, as it allows every one of the calls to
ilk_increase_wm_latency() to occur (instead of short circuiting with
logical OR) while still caring about the result of each call.
To make this clearer to the compiler, use the '|=' operator to assign
the result of each ilk_increase_wm_latency() call to changed, which
keeps the meaning of the code the same but makes it obvious that every
one of these calls is expected to happen.
Link: https://github.com/ClangBuiltLinux/linux/issues/1473
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Dávid Bolvanský <david.bolvansky@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014211916.3550122-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hfa384x_usb_throttlefn()
commit 502408a61f4b7eb4713f44bd77f4a48e6cb1b59a upstream.
A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean expressions:
In file included from drivers/staging/wlan-ng/prism2usb.c:2:
drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
((test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) &&
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: note: cast one or both operands to int to silence this warning
1 warning generated.
The comment explains that short circuiting here is undesirable, as the
calls to test_and_{clear,set}_bit() need to happen for both sides of the
expression.
Clang's suggestion would work to silence the warning but the readability
of the expression would suffer even more. To clean up the warning and
make the block more readable, use a variable for each side of the
bitwise expression.
Link: https://github.com/ClangBuiltLinux/linux/issues/1478
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211014215703.3705371-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
