summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-08pinctrl: intel: fix unexpected interruptŁukasz Bartosik1-20/+34
commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream. ASUS Chromebook C223 with Celeron N3350 crashes sometimes during cold booot. Inspection of the kernel log showed that it gets into an inifite loop logging the following message: ->handle_irq(): 000000009cdb51e8, handle_bad_irq+0x0/0x251 ->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7 ->action(): 00000 IRQ_NOPROBE set unexpected IRQ trap at vector 7c The issue happens during cold boot but only if cold boot happens at most several dozen seconds after Chromebook is powered off. For longer intervals between power off and power on (cold boot) the issue does not reproduce. The unexpected interrupt is sourced from INT3452 GPIO pin which is used for SD card detect. Investigation relevealed that when the interval between power off and power on (cold boot) is less than several dozen seconds then values of INT3452 GPIO interrupt enable and interrupt pending registers survive power off and power on sequence and interrupt for SD card detect pin is enabled and pending during probe of SD controller which causes the unexpected IRQ message. "Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc mentions that GPIO interrupt enable and status registers default value is 0x0. The fix clears INT3452 GPIO interrupt enabled and interrupt pending registers in its probe function. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured lineAndy Shevchenko1-8/+2
commit e12963c453263d5321a2c610e98cbc731233b685 upstream. The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario. When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event. This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Grace Kao <grace.kao@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08pinctrl: sunxi: Fix H616 I2S3 pin dataAndre Przywara1-4/+4
commit 1fd6bb5b47a65eacb063b37e6fa6df2b8fa92959 upstream. Two bugs have sneaked in the H616 pinctrl data: - PH9 uses the mux value of 0x3 twice (one should be 0x5 instead) - PH8 and PH9 use the "i2s3" function name twice in each pin For the double pin name we use the same trick we pulled for i2s0: append the pin function to the group name to designate the special function. Fixes: 25adc29407fb ("pinctrl: sunxi: Add support for the Allwinner H616 pin controller") Reported-by: SASANO Takayoshi <uaa@mx5.nisiq.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220105172952.23347-1-andre.przywara@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabledMario Limonciello1-2/+1
commit e55a3aea418269266d84f426b3bd70794d3389c8 upstream. dGPUs connected to Intel systems configured for suspend to idle will not have the power rails cut at suspend and resetting the GPU may lead to problematic behaviors. Fixes: e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/i915/overlay: Prevent divide by zero bugs in scalingDan Carpenter1-0/+3
commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream. Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/kmb: Fix for build errors with Warray-boundsAnitha Chrisanthus1-6/+0
commit 43f2517955875be5d96b641fba33d73097fe3cd9 upstream. This fixes the following build error drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable': drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 165 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 162 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220127194227.2213608-1-anitha.chrisanthus@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: stmmac: ensure PTP time register reads are consistentYannick Vignon1-7/+12
commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream. Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: stmmac: dump gmac4 DMA registers correctlyCamel Guo2-2/+18
commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream. Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: macsec: Verify that send_sci is on when setting Tx sci explicitlyLior Nahmanson1-0/+9
commit d0cfa548dbde354de986911d3913897b5448faad upstream. When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: macsec: Fix offload support for NETDEV_UNREGISTER eventLior Nahmanson1-12/+12
commit 9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream. Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()Jisheng Zhang1-2/+4
commit 6449520391dfc3d2cef134f11a91251a054ff7d0 upstream. There are two issues with runtime pm handling in stmmac_dvr_remove(): 1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back. 2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove() stmmac_remove_config_dt() clk_disable_unprepare() CCF will complain this time. The error handling code path suffers from the similar situtaion. Here are kernel warnings in error handling code path on Allwinner D1 platform: [ 1.604695] ------------[ cut here ]------------ [ 1.609328] bus-emac already disabled [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1 [ 1.627653] Hardware name: Allwinner D1 NeZha (DT) [ 1.632443] Workqueue: events_unbound deferred_probe_work_func [ 1.638286] epc : clk_core_disable+0xcc/0xec [ 1.642561] ra : clk_core_disable+0xcc/0xec [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10 [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00 [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8 [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002 [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29 [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80 [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0 [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003 [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78 [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160 [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]--- [ 1.873675] ------------[ cut here ]------------ [ 1.878366] bus-emac already unprepared [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168 [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1 [ 1.898674] Hardware name: Allwinner D1 NeZha (DT) [ 1.903464] Workqueue: events_unbound deferred_probe_work_func [ 1.909305] epc : clk_core_unprepare+0xe4/0x168 [ 1.913840] ra : clk_core_unprepare+0xe4/0x168 [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10 [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002 [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00 [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800 [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001 [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001 [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80 [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001 [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002 [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003 [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168 [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160 [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]--- Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected ↵Yuji Ishikawa1-2/+7
speed request. commit 928d6fe996f69330ded6b887baf4534c5fac7988 upstream. Variable clk_sel_val is not initialized in the default case of the first switch statement. In that case, the function should return immediately without any changes to the hardware. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: ieee802154: ca8210: Stop leaking skb'sMiquel Raynal1-0/+1
commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream. Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: ieee802154: mcr20a: Fix lifs/sifs periodsMiquel Raynal1-2/+2
commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with phy->symbol_duration in order to get these values in microseconds. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: ieee802154: hwsim: Ensure proper channel selection at probe timeMiquel Raynal1-0/+1
commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream. Drivers are expected to set the PHY current_channel and current_page according to their default state. The hwsim driver is advertising being configured on channel 13 by default but that is not reflected in its own internal pib structure. In order to ensure that this driver consider the current channel as being 13 internally, we at least need to set the pib->channel field to 13. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [stefan@datenfreihafen.org: fixed assigment from page to channel] Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08IB/cm: Release previously acquired reference counter in the cm_id_privMark Zhang1-1/+1
commit b856101a1774b5f1c8c99e8dfdef802856520732 upstream. In failure flow, the reference counter acquired was not released, and the following error was reported: drivers/infiniband/core/cm.c:3373 cm_lap_handler() warn: inconsistent refcounting 'cm_id_priv->refcount.refs.counter': Fixes: 7345201c3963 ("IB/cm: Improve the calling of cm_init_av_for_lap and cm_init_av_by_path") Link: https://lore.kernel.org/r/7615f23bbb5c5b66d03f6fa13e1c99d51dae6916.1642581448.git.leonro@nvidia.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08IB/hfi1: Fix tstats alloc and deallocMike Marciniszyn1-2/+12
commit e5cce44aff3be9ad2cd52f63f35edbd706181d50 upstream. The tstats allocation is done in the accelerated ndo_init function but the allocation is not tested to succeed. The deallocation is not done in the accelerated ndo_uninit function. Resolve issues by testing for an allocation failure and adding the free_percpu in the uninit function. Fixes: aa0616a9bd52 ("IB/hfi1: switch to core handling of rx/tx byte/packet counters") Link: https://lore.kernel.org/r/1642287756-182313-5-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: uniphier: fix reference count leak in uniphier_spi_probe()Xin Xiong1-4/+14
commit 37c2c83ca4f1ef4b6908181ac98e18360af89b42 upstream. The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both `dma_rx` and `dma_tx` objects, which may lead to refcount leaks. Fix it by decrementing the reference count of specific objects in those error paths. Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Fixes: 28d1dddc59f6 ("spi: uniphier: Add DMA transfer mode support") Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: meson-spicc: add IRQ check in meson_spicc_probeMiaoqian Lin1-0/+5
commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream. This check misses checking for platform_get_irq()'s call and may passes the negative error codes to devm_request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: 454fa271bc4e ("spi: Add Meson SPICC driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: mediatek: Avoid NULL pointer crash in interruptBenjamin Gaignard1-1/+1
commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream. In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter. Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: bcm-qspi: check for valid cs before applying chip selectKamal Dasu1-1/+1
commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream. Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume. Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()Joerg Roedel1-0/+2
commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream. The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms. A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix. Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()Guoqing Jiang1-3/+10
commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream. After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/mlx4: Don't continue event handler after memory allocation failureLeon Romanovsky1-1/+1
commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream. The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE event handler will cause skip the assignment logic, but ib_dispatch_event() will be called anyway. Fix it by calling to return instead of break after memory allocation failure. Fixes: 00f5ce99dc6e ("mlx4: Use port management change event instead of smp_snoop") Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/siw: Fix broken RDMA Read Fence/Resume logic.Bernard Metzler2-15/+12
commit b43a76f423aa304037603fd6165c4a534d2c09a7 upstream. Code unconditionally resumed fenced SQ processing after next RDMA Read completion, even if other RDMA Read responses are still outstanding, or ORQ is full. Also adds comments for better readability of fence processing, and removes orq_get_tail() helper, which is not needed anymore. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Fixes: a531975279f3 ("rdma/siw: main include file") Link: https://lore.kernel.org/r/20220130170815.1940-1-bmt@zurich.ibm.com Reported-by: Jared Holzman <jared.holzman@excelero.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08IB/rdmavt: Validate remote_addr during loopback atomic testsMike Marciniszyn1-0/+2
commit 4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream. The rdma-core test suite sends an unaligned remote address and expects a failure. ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest) The qib/hfi1 rc handling validates properly, but the test has the client and server on the same system. The loopback of these operations is a distinct code path. Fix by syntaxing the proposed remote address in the loopback code path. Fixes: 15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt") Link: https://lore.kernel.org/r/1642584489-141005-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/siw: Fix refcounting leak in siw_create_qp()Dan Carpenter1-1/+2
commit a75badebfdc0b3823054bedf112edb54d6357c75 upstream. The atomic_inc() needs to be paired with an atomic_dec() on the error path. Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory") Link: https://lore.kernel.org/r/20220118091104.GA11671@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/ucma: Protect mc during concurrent multicast leavesLeon Romanovsky1-11/+23
commit 36e8169ec973359f671f9ec7213547059cae972e upstream. Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. Fixes: 95fe51096b7a ("RDMA/ucma: Remove mc_list and rely on xarray") Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com Reported-by: syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/cma: Use correct address when leaving multicast groupMaor Gottlieb1-10/+12
commit d9e410ebbed9d091b97bdf45b8a3792e2878dc48 upstream. In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate the mgid, otherwise we will generate an IGMP for an incorrect address. Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/913bc6783fd7a95fe71ad9454e01653ee6fb4a9a.1642491047.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08Revert "ASoC: mediatek: Check for error clk pointer"Guenter Roeck1-11/+4
This reverts commit 38accfd85e41b7ca547c5a7d4866bbc1462950cb which is commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream With this patch in the tree, Chromebooks running the affected hardware no longer boot. Bisect points to this patch, and reverting it fixes the problem. An analysis of the code with this patch applied shows: ret = init_clks(pdev, clk); if (ret) return ERR_PTR(ret); ... for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { struct clk *c = clk[data->clk_id[j]]; if (IS_ERR(c)) { dev_err(&pdev->dev, "%s: clk unavailable\n", data->name); return ERR_CAST(c); } scpd->clk[j] = c; } Not all clocks in the clk_names array have to be present. Only the clocks in the data->clk_id array are actually needed. The code already checks if the required clocks are available and bails out if not. The assumption that all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be reverted. Fixes: 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer") Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn> Cc: Mark Brown <broonie@kernel.org> Cc: James Liao <jamesjj.liao@mediatek.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matthias Brugger <matthias.bgg@gmail.com Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/ Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08fbcon: Add option to enable legacy hardware accelerationHelge Deller7-34/+84
commit a3f781a9d6114c1d1e01defb7aa234dec45d2a5f upstream. Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08Revert "fbcon: Disable accelerated scrolling"Helge Deller1-8/+37
commit 87ab9f6b7417349aa197a6c7098d4fdd4beebb74 upstream. This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08IB/hfi1: Fix AIP early init panicMike Marciniszyn1-10/+3
commit 5f8f55b92edd621f056bdf09e572092849fabd83 upstream. An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. Cc: stable@vger.kernel.org Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08dma-buf: heaps: Fix potential spectre v1 gadgetJordy Zomer1-0/+2
commit 92c4cfaee6872038563c5b6f2e8e613f9d84d47d upstream. It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. Signed-off-by: Jordy Zomer <jordy@pwning.systems> Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework") Cc: <stable@vger.kernel.org> # v5.6+ Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: added fixes and cc: stable tags] Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()Uday Shankar1-0/+1
commit 6a51abdeb259a56d95f13cc67e3a0838bcda0377 upstream. Controller deletion/reset, immediately followed by or concurrent with a reconnect, is hard failing the connect attempt resulting in a complete loss of connectivity to the controller. In the connect request, fabrics looks for an existing controller with the same address components and aborts the connect if a controller already exists and the duplicate connect option isn't set. The match routine filters out controllers that are dead or dying, so they don't interfere with the new connect request. When NVME_CTRL_DELETING_NOIO was added, it missed updating the state filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this new state, it's seen as a live controller and fails the connect request. Correct by adding the DELETING_NIO state to the match checks. Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work") Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina ↵Aun-Ali Zaidi1-0/+20
panels commit 30fbce374745a9c6af93c775a5ac49a97f822fda upstream. The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is contradictory to the highest rate supported reported by EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results in no display modes being found and a dark panel. For now, simply force the maximum supported link rate for the eDP attached 2018 15" Apple Retina panels. Additionally, we must also check the firmware revision since the device ID reported by the DPCD is identical to that of the more capable 16,1, incorrectly quirking it. We also use said firmware check to quirk the refreshed 15,1 models with Vega graphics as they use a slightly newer firmware version. Tested-by: Aun-Ali Zaidi <admin@kodeit.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net> Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/amd/display: watermark latencies is not enough on DCN31Paul Hsieh1-10/+10
commit f5fa54f45ab41cbb1f99b1208f49554132ffb207 upstream. [Why] The original latencies were causing underflow in some modes. Resolution: 2880x1620@60p when HDR enable [How] 1. Replace with the up-to-date watermark values based on new measurments 2. Correct the ddr_wm_table name to DDR5 on DCN31 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/amd/pm: correct the MGpuFanBoost support for Beige GobyEvan Quan1-3/+3
commit 3ec5586b4699cfb75cdfa09425e11d121db40773 upstream. The existing way cannot handle Beige Goby well as a different PPTable data structure(PPTable_beige_goby_t instead of PPTable_t) is used there. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/i915/adlp: Fix TypeC PHY-ready status readoutImre Deak1-1/+2
commit 3c6f13ad723e7206f03bb2752b01d18202b7fc9d upstream. The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port index, fix this up. This only caused an issue on TC#3/4 ports in legacy mode, as in all other cases the two indices either match (on TC#1/2) or the TCSS_DDI_STATUS_READY flag is set regardless of something being connected or not (on TC#1/2/3/4 in dp-alt and tbt-alt modes). Reported-and-tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Fixes: 55ce306c2aa1 ("drm/i915/adl_p: Implement TC sequences") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4698 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220126104356.2022975-1-imre.deak@intel.com (cherry picked from commit 516b33460c5bee78b2055637b0547bdb0e6af754) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/nouveau: fix off by one in BIOS boundary checkingNick Lopez1-1/+1
commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream. Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by: Nick Lopez <github@glowingmonkey.org> Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: stm32-qspi: Update spi registeringPatrice Chotard1-30/+17
commit e4d63473d3110afd170e6e0e48494d3789d26136 upstream. Some device driver need to communicate to qspi device during the remove process, qspi controller must be functional when spi_unregister_master() is called. To ensure this, replace devm_spi_register_master() by spi_register_master() and spi_unregister_master() is called directly in .remove callback before stopping the qspi controller. This issue was put in evidence using kernel v5.11 and later with a spi-nor which supports the software reset feature introduced by commit d73ee7534cc5 ("mtd: spi-nor: core: perform a Soft Reset on shutdown") Fixes: c530cd1d9d5e ("spi: spi-mem: add stm32 qspi controller") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: <stable@vger.kernel.org> # 5.8.x Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20220117121744.29729-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/i915: Disable DSB usage for nowVille Syrjälä1-1/+1
commit 99510e1afb4863a225207146bd988064c5fd0629 upstream. Turns out the DSB has trouble correctly loading the gamma LUT. From a cursory look maybe like some entries do not load properly, or they get loaded with some gibberish. Unfortunately our current kms_color/etc. tests do not seem to catch this. I had a brief look at the generated DSB batch and it looked correct. Tried a few quick tricks like writing the index register twice/etc. but didn't see any improvement. Also tried switching to the 10bit gamma mode in case there is yet another issue with the multi-segment mode, but even the 10bit mode was showing issues. Switching to mmio fixes all of it. I suppose one theory is that maybe the DSB bangs on the LUT too quickly and it can't keep up and instead some data either gets dropped or corrupted. To confirm that someone should try to slow down the DSB's progress a bit. Another thought was that maybe the LUT has crappy dual porting and you get contention if you try to load it during active scanout. But why then would the mmio path work, unless it's just sufficiently slow? Whatever the case, this is currently busted so let's disable it until we get to the root of the problem. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3916 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014181856.17581-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08peci: aspeed: Improve workaround for controller hangIwona Winiarska1-2/+21
When processing PECI transaction, observing any HW state different than "idle" means that PECI controller won't be able to send PECI commands. When that occurs, attempting to reinitialize the HW by writing registers is not enough in some cases, and actual reset needs to be involved. Fixes: 20b020c06aa9 ("peci: aspeed: add a WA to cover timing negotiation issue") Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
2022-02-08mtd: aspeed-smc: improve probe resiliencePatrick Williams1-2/+13
The aspeed-smc can have multiple SPI devices attached to it in the device tree. If one of the devices is missing or failing the entire probe will fail and all MTD devices under the controller will be removed. On OpenBMC this results in a kernel panic due to missing rootfs: [ 0.538774] aspeed-smc 1e620000.spi: Using 50 MHz SPI frequency [ 0.540471] aspeed-smc 1e620000.spi: w25q01jv-iq (131072 Kbytes) [ 0.540750] aspeed-smc 1e620000.spi: CE0 window [ 0x20000000 - 0x28000000 ] 128MB [ 0.540943] aspeed-smc 1e620000.spi: CE1 window [ 0x28000000 - 0x2c000000 ] 64MB [ 0.541143] aspeed-smc 1e620000.spi: read control register: 203b0041 [ 0.581442] 5 fixed-partitions partitions found on MTD device bmc [ 0.581625] Creating 5 MTD partitions on "bmc": [ 0.581854] 0x000000000000-0x0000000e0000 : "u-boot" [ 0.584472] 0x0000000e0000-0x000000100000 : "u-boot-env" [ 0.586468] 0x000000100000-0x000000a00000 : "kernel" [ 0.588465] 0x000000a00000-0x000006000000 : "rofs" [ 0.590552] 0x000006000000-0x000008000000 : "rwfs" [ 0.592605] aspeed-smc 1e620000.spi: Using 50 MHz SPI frequency [ 0.592801] aspeed-smc 1e620000.spi: unrecognized JEDEC id bytes: 00 00 00 00 00 00 [ 0.593039] Deleting MTD partitions on "bmc": [ 0.593175] Deleting u-boot MTD partition [ 0.637929] Deleting u-boot-env MTD partition [ 0.829527] Deleting kernel MTD partition [ 0.856902] Freeing initrd memory: 1032K [ 0.866428] Deleting rofs MTD partition [ 0.906264] Deleting rwfs MTD partition [ 0.986628] aspeed-smc 1e620000.spi: Aspeed SMC probe failed -2 [ 0.986929] aspeed-smc: probe of 1e620000.spi failed with error -2 ... [ 2.936719] /dev/mtdblock: Can't open blockdev mount: mounting /dev/mtdblock on run/initramfs/ro failed: No such file or directory [ 2.963030] MTD: Couldn't look up '/dev/mtdblock': -2 mount: mounting /dev/mtdblock on run/initramfs/rw failed: No such file or directory Mounting read-write /dev/mtdblock filesystem failed. Please fix and run mount /dev/mtdblock run/initramfs/rw -t jffs2 -o rw or perform a factory reset with the clean-rwfs-filesystem option. Fatal error, triggering kernel panic! [ 3.013047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 Many BMC designs have two flash chips so that they can handle a hardware failure of one of them. If one chip failed, it doesn't do any good to have redundancy if they all get removed anyhow. Improve the resilience of the probe function to handle one of the children being missing or failed. Only in the case where all children fail to probe should the controller be failed out. OpenBMC-Staging-Count: 1 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211229143334.297305-1-patrick@stwcx.xyz Link: https://lore.kernel.org/r/20220131225904.137769-1-patrick@stwcx.xyz Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-07hwmon: (pmbus) Clear pmbus fault/warning bits before readVikash Chandola1-0/+9
pmbus fault and warning bits are not cleared by itself once fault/warning condition is not valid anymore. As per pmbus datasheet faults must be cleared by user. Modify hwmon behavior to clear latched status bytes if any bit in status register is high prior to returning fresh data to userspace. If fault/warning conditions are still applicable fault/warning bits will be set and we will get updated data in second read. Hwmon behavior is changed here. Now sysfs reads will reflect latest values from pmbus slave, not latched values. In case a transient warning/fault has happened in the past, it will no longer be reported to userspace. Signed-off-by: Vikash Chandola <vikash.chandola@intel.com>
2022-02-07i3c: master: Implement CCC GETSTATUS functionOleksandr Shulzhenko3-0/+51
Get Device Status (GETSTATUS) is a Direct CCC that is sent by I3C controller to I3C Target device to read I3C Target status. Signed-off-by: Oleksandr Shulzhenko <oleksandr.shulzhenko.viktorovych@intel.com>
2022-02-05Revert "drm/vc4: hdmi: Make sure the device is powered with CEC" againGreg Kroah-Hartman1-9/+1
This reverts commit fbe1e801bc1fa0a4c34a5284abf6ad0ef887cdfc which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05Revert "drm/vc4: hdmi: Make sure the device is powered with CEC"Greg Kroah-Hartman1-13/+12
This reverts commit d5e81e3a3e0b15964a86c19b5c27397676d6fc1b which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05e1000e: Handshake with CSME starts from ADL platformsSasha Neftin1-2/+4
commit cad014b7b5a6897d8c4fad13e2888978bfb7a53f upstream. Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: amd-xgbe: Fix skb data length underflowShyam Sundar S K1-1/+11
commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 21:48:47 +0300