summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-12-09Merge tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds40-1026/+2200
Pull MMC updates from Ulf Hansson: "MMC core: - Consolidation and cleanups. - Some improvements regarding error handling. - Increase maximum amount of block devices. - Use correct OCR mask for SDIO when restoring power. - Fix prepared requests while doing BKOPS. - Convert to modern PM ops. - Add mmc_send_tuning() API and convert some hosts to use it. MMC host: - toshsd: New Toshiba PCI SD controller driver. - sdhci: 64-bit ADMA support. - sdhci: Some regulator fixes. - sdhci: HS400 support. - sdhci: Various fixes cleanups. - atmel-mci: Modernization and cleanups. - atmel-mci: Runtime PM support. - omap_hsmmc: Modernization and cleanups. - omap_hsmmc: Fix UHS card with DDR50 support. - dw_mmc: Support for ARM64 and Exynos 7 variant. - dw_mmc: Add support for IMG Pistachio variant. - dw_mmc: Various fixes and cleanups. - mvsdio: DMA fixes. - mxs-mmc: Modernization and cleanups. - mxcmmc: Various fixes" * tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc: (126 commits) mmc: sdhci-msm: Convert to mmc_send_tuning() mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning() mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter mmc: queue: Improve error handling during allocation of bounce buffers mmc: sdhci-acpi: Add two host capabilities for Intel mmc: sdhci-pci: Add two host capabilities for BYT mmc: sdhci-acpi: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYT mmc: atmel-mci: use probe deferring if dma controller is not ready yet mmc: atmel-mci: stop using specific initcall mmc: atmel-mci: remove __init/__exit attributes mmc: atmel-mci: remove useless DMA stuff for non-dt devices mmc: omap_hsmmc: Fix UHS card with DDR50 support mmc: core: add core-level function for sending tuning commands mmc: core: hold SD Clock before CMD11 during Signal mmc: mxs-mmc: Check for clk_prepare_enable() error mmc: mxs-mmc: Propagate the real error mmc: mxs-mmc: No need to do NULL check on 'iores' mmc: dw_mmc: Add support for IMG Pistachio mmc: mxs-mmc: Simplify PM hooks ...
2014-12-08mmc: sdhci-msm: Convert to mmc_send_tuning()Ulf Hansson1-43/+7
Instead of having a local hack taking care of sending the tuning command and as well to verify the response pattern, let's convert to the common mmc_send_tuning() API instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Georgi Djakov <gdjakov@mm-sol.com> Acked-by: Georgi Djakov <gdjakov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2014-12-08mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()Ulf Hansson1-65/+3
Instead of having a local function taking care of sending the tuning command, let's use the common mmc_send_tuning() API provided by the mmc core. In this way the request will be handled as any other request by sdhci core. As an effect of this change, the pm_runtime_get_sync() call at esdhc_prepare_tuning() isn't needed any more. This patch will also introduce another change in behavior, since before the response pattern to the tuning command wasn't verified by sdhci-esdhc-imx. The mmc_send_tuning() does that. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Dong Aisheng <b29396@freescale.com> Acked-by: Dong Aisheng <b29396@freescale.com>
2014-12-08mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameterUlf Hansson1-4/+3
To be able to use mmc_send_tuning() prior the struct mmc_card has been allocated, let's convert it to take the struct mmc_host* as parameter instead. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Dong Aisheng <b29396@freescale.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2014-12-07Merge branch 'for-3.18-fixes' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Three libata fixes for v3.18. Nothing too interesting. PCI ID ID and quirk additions to ahci and an error handling path fix in sata_fsl" * 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: disable MSI on SAMSUNG 0xa800 SSD sata_fsl: fix error handling of irq_of_parse_and_map AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
2014-12-06Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-1/+1
Pull watchdog fix from Wim Van Sebroeck: "Fix the watchdog mask bit offset for Exynos7" * git://www.linux-watchdog.org/linux-watchdog: watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
2014-12-06Merge branch 'i2c/for-current' of ↵Linus Torvalds2-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Here are two more driver bugfixes for I2C which would be good to have" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Set the hardware time-out register to maximum value i2c: davinci: generate STP always when NACK is received
2014-12-05watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7Abhilash Kesavan1-1/+1
The watchdog mask bit offset listed for Exynos7 is incorrect. Fix this. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com Reviewd-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-05mmc: queue: Improve error handling during allocation of bounce buffersBhuvanesh Surachari1-7/+9
Allocation of previous bounce buffer in mmc_init_queue when the current bounce buffer allocation fails was leading to a crash later in __blk_segment_map_sg. Error handling is improved by allocating previous bounce buffer only if the current bounce buffer allocation succeeds. Signed-off-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-05Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-13/+11
Pull drm intel fixes from Dave Airlie: "Two intel stable fixes, that should be it from me for this round" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
2014-12-05Merge tag 'pm+acpi-3.18-rc8' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI backlight fix from Rafael Wysocki: "This is a simple fix for an ACPI backlight regression introduced by a recent commit that overlooked a corner case which should have been taken into account" * tag 'pm+acpi-3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: update condition to check if device is in _DOD list
2014-12-05Merge tag 'drm-intel-fixes-2014-12-04' of ↵Dave Airlie2-13/+11
git://anongit.freedesktop.org/drm-intel into drm-fixes Silence some pch fifo underrun reports and panel locking backtraces, both cc: stable. * tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
2014-12-05Merge tag 'media/v3.18-rc8' of ↵Linus Torvalds5-14/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A core fix and some driver fixes: - regression fix in Remote Controller core affecting RC6 protocol handling - fix video buffer handling in cx23885 - race fix in solo6x10 - fix image selection in smiapp - fix reported payload size on s2255drv - two updates for MAINTAINERS file" * tag 'media/v3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] rc-core: fix toggle handling in the rc6 decoder MAINTAINERS: Update mchehab's addresses [media] cx23885: use sg = sg_next(sg) instead of sg++ [media] s2255drv: fix payload size for JPG, MJPEG [media] Update MAINTAINERS for solo6x10 [media] solo6x10: fix a race in IRQ handler [media] smiapp: Only some selection targets are settable
2014-12-04i2c: cadence: Set the hardware time-out register to maximum valueVishnu Motghare1-0/+11
Cadence I2C controller has bug wherein it generates invalid read transactions after timeout in master receiver mode. This driver does not use the HW timeout and this interrupt is disabled but the feature itself cannot be disabled. Hence, this patch writes the maximum value (0xFF) to this register. This is one of the workarounds to this bug and it will not avoid the issue completely but reduces the chances of error. Signed-off-by: Vishnu Motghare <vishnum@xilinx.com> Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-12-04i2c: davinci: generate STP always when NACK is receivedGrygorii Strashko1-5/+3
According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a26eb ("i2c: omap: query STP always when NACK is received"). Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-12-04ahci: disable MSI on SAMSUNG 0xa800 SSDTejun Heo1-0/+1
Just like 0x1600 which got blacklisted by 66a7cbc303f4 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171 Cc: stable@vger.kernel.org
2014-12-04Merge branch 'i2c/for-current' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfixes from Wolfram Sang: "A few driver bugfixes for 3.18" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: omap: fix i207 errata handling i2c: designware: prevent early stop on TX FIFO empty i2c: omap: fix NACK and Arbitration Lost irq handling
2014-12-04Merge tag 'pci-v3.18-fixes-4' of ↵Linus Torvalds1-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "This fixes a Tegra20 regression that we introduced during the v3.18 merge window" * tag 'pci-v3.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: tegra: Use physical range for I/O mapping
2014-12-04Merge tag 'devicetree-for-linus' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree bugfix from Grant Likely: "One more bug fix for v3.18. I debated whether or not to send you this merge request because we're at such a late rc. The bug isn't critical in that there is only one system known to be affected and the patch is easy to backport. The codepath is used by pretty much every DT based system, so there is risk a of regression (it /should/ be safe, but I've been bitten by stuff that should be safe before). I've had it in linux-next for a week and haven't received any complaints. I think it probably should just be merged right away rather than waiting for the merge window and backporting. It does fix a real bug and the code is theoretically safer after the change. I can't think of any situation where it would be dangerous to reserve the DT memory an extra time. Summary from tag: Single bugfix for boot failure seen in the wild. The memory reserve code tries to be clever about reserving the FDT, but it should just go ahead and reserve it unconditionally to avoid the problem of partial overlap described in the patch" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap
2014-12-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds10-45/+88
Pull drm fixes from Dave Airlie: "Radeon and Nouveau fixes: So nouveau had a few regression introduced, Ben and Maarten finally tracked down the one that was causing problems on my MacBookPro, also nvidia gave some info on the an engine we were using incorrectly, so disable our use of it, and one regresion with pci hotplug affecting optimus users. Radeon has an oops fixs, sync fix, and one workaround to avoid broken functionality on 32-bit x86, this needs better root causing and a better fix, but the bandaid is a lot safer at this point" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6 drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86 drm/radeon: sync all BOs involved in a CS v2 nouveau: move the hotplug ignore to correct place. drm/nouveau/gf116: remove copy1 engine drm/nouveau: prevent stale fence->channel pointers, and protect with rcu drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
2014-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds6-67/+72
Pull networking fixes from David Miller: 1) Fill in ethtool link parameters for all link types in cxgb4, from Hariprasad Shenai. 2) Fix probe regressions in stmmac driver, from Huacai Chen. 3) Network namespace leaks on errirs in rtnetlink, from Nicolas Dichtel. 4) Remove erroneous BUG check which can actually trigger legitimately, in xen-netfront. From Seth Forshee. 5) Validate length of IFLA_BOND_ARP_IP_TARGET netlink attributes, from Thomas Grag. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: cxgb4: Fill in supported link mode for SFP modules xen-netfront: Remove BUGs on paged skb data which crosses a page boundary sh_eth: Fix sleeping function called from invalid context stmmac: platform: Move plat_dat checking earlier sh_eth: Fix skb alloc size and alignment adjust rule. rtnetlink: release net refcnt on error in do_setlink() bond: Check length of IFLA_BOND_ARP_IP_TARGET attributes
2014-12-03drivers/input/evdev.c: don't kfree() a vmalloc addressAndrew Morton1-1/+1
If kzalloc() failed and then evdev_open_device() fails, evdev_open() will pass a vmalloc'ed pointer to kfree. This might fix https://bugzilla.kernel.org/show_bug.cgi?id=88401, where there was a crash in kfree(). Reported-by: Christian Casteyde <casteyde.christian@free.fr> Belatedly-Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-03cxgb4: Fill in supported link mode for SFP modulesHariprasad Shenai1-2/+6
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03xen-netfront: Remove BUGs on paged skb data which crosses a page boundarySeth Forshee1-5/+0
These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c374782e4 ("xen/netfront: handle compound page fragments on transmit") Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with ↵Petr Mladek1-0/+2
3.18.0-rc6 I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-02drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86Michel Dänzer1-0/+7
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84627 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-02drm/radeon: sync all BOs involved in a CS v2Christian König1-10/+7
Not just the userspace relocs, otherwise we won't wait for a swapped out page tables to be swapped in again. v2: rebased on Alex current drm-fixes-3.18 Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-02sata_fsl: fix error handling of irq_of_parse_and_mapDmitry Torokhov1-1/+1
irq_of_parse_and_map() returns 0 on error (the result is unsigned int), so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-12-02AHCI: Add DeviceIDs for Sunrise Point-LP SATA controllerDevin Ryles1-0/+3
This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by: Devin Ryles <devin.ryles@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-12-02drm/i915: Unlock panel even when LVDS is disabledDaniel Vetter1-11/+11
Otherwise we'll have backtraces in assert_panel_unlocked because the BIOS locks the register. In the reporter's case this regression was introduced in commit c31407a3672aaebb4acddf90944a114fa5c8af7b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Oct 18 21:07:01 2012 +0100 drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-by: Alexey Orishko <alexey.orishko@gmail.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francois Tigeot <ftigeot@wolfpond.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-02mmc: sdhci-acpi: Add two host capabilities for IntelAdrian Hunter1-2/+5
Intel host controllers are capable of doing the bus width test and of waiting while busy, so add the capability flags. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: sdhci-pci: Add two host capabilities for BYTAdrian Hunter1-2/+8
BYT host controllers are capable of doing the bus width test and of waiting while busy, so add the capability flags. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: sdhci-acpi: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESCAdrian Hunter1-1/+4
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC actually causes standard-compliant behaviour by causing the flagging of the last DMA transfer descriptor as the end instead of there being an additional nop descriptor which is flagged as the end. Consequently, it is better to have the quirk. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYTAdrian Hunter1-0/+3
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC actually causes standard-compliant behaviour by causing the flagging of the last DMA transfer descriptor as the end instead of there being an additional nop descriptor which is flagged as the end. Consequently, it is better to have the quirk. Add it for BYT. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: atmel-mci: use probe deferring if dma controller is not ready yetludovic.desroches@atmel.com1-24/+24
Return probe defer if requesting a dma channel without a dma controller probed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: atmel-mci: stop using specific initcallludovic.desroches@atmel.com1-13/+2
No more use late initcall to manage probing order. Use probe deferring if needed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: atmel-mci: remove __init/__exit attributesludovic.desroches@atmel.com1-5/+5
Using __init/__exit attributes can cause several breakages so remove them. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02mmc: atmel-mci: remove useless DMA stuff for non-dt devicesludovic.desroches@atmel.com1-8/+0
All devices with a DMA controller are DT compliant and legacy support has been removed. For those reasons, some DMA stuff is useless. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-12-02drm/i915: More cautious with pch fifo underrunsDaniel Vetter1-2/+0
Apparently PCH fifo underruns are tricky, we have plenty reports that we see the occasional underrun (especially at boot-up). So for a change let's see what happens when we don't re-enable pch fifo underrun reporting when the pipe is disabled. This means that the kernel can't catch pch fifo underruns when they happen (except when all pipes are on on the pch). But we'll still catch underruns when disabling the pipe again. So not a terrible reduction in test coverage. Since the DRM_ERROR is new and hence a regression plan B would be to revert it back to a debug output. Which would be a lot worse than this hack for underrun test coverage in the wild. See the referenced discussions for more. References: http://mid.gmane.org/CA+gsUGRfGe3t4NcjdeA=qXysrhLY3r4CEu7z4bjTwxi1uOfy+g@mail.gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=86233 References: https://bugs.freedesktop.org/show_bug.cgi?id=86478 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: lu hua <huax.lu@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-02nouveau: move the hotplug ignore to correct place.Dave Airlie1-1/+1
Introduced in b440bde74f, however it was added to the wrong function in nouveau. https://bugzilla.kernel.org/show_bug.cgi?id=86011 Cc: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-02Merge branch 'linux-3.18' of ↵Dave Airlie6-34/+71
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Just a couple of fixes for the fallout from the fence rework. * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/gf116: remove copy1 engine drm/nouveau: prevent stale fence->channel pointers, and protect with rcu drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
2014-12-02drm/nouveau/gf116: remove copy1 engineIlia Mirkin1-1/+0
Indications are that no GF116's actually have a copy engine there, but actually have the decompression engine. This engine can be made to do copies, but that should be done separately. Unclear why this didn't turn up on all GF116's, but perhaps the non-mobile ones came with enough VRAM to not trigger ttm migrations in test scenarios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=85465 Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=59168 Cc: stable@vger.kernel.org Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02drm/nouveau: prevent stale fence->channel pointers, and protect with rcuMaarten Lankhorst2-29/+67
Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02drm/nouveau/fifo/g84-: ack non-stall interrupt before handling itBen Skeggs3-4/+4
Closes a very unlikely race that can occur if another NonStallInterrupt method passes between checking fences and acking the previous interrupt. With this change, the interrupt will re-fire under such conditions. Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02PCI: tegra: Use physical range for I/O mappingThierry Reding1-8/+20
Commit 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") changed how I/O resources are parsed from DT. Rather than containing the physical address of the I/O region, the addresses will now be in I/O address space. On Tegra the union of all ranges is used to expose a top-level memory- mapped resource for the PCI host bridge. This helps to make /proc/iomem more readable. Combining both of the above, the union would now include the I/O space region. This causes a regression on Tegra20, where the physical base address of the PCIe controller (and therefore of the union) is located at physical address 0x80000000. Since I/O space starts at 0, the union will now include all of system RAM which starts at 0x00000000. This commit fixes this by keeping two copies of the I/O range: one that represents the range in the CPU's physical address space, the other for the range in the I/O address space. This allows the translation setup within the driver to reuse the physical addresses. The code registering the I/O region with the PCI core uses both ranges to establish the mapping. Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2014-12-01ACPI / video: update condition to check if device is in _DOD listAaron Lu1-1/+2
Commit 0b8db271f159 ("ACPI / video: check _DOD list when creating backlight devices") checks if the video device is in the bind devices list to decide if we should create backlight device for it, that causes problem for one Dell Latitude E6410, where none of the video output devices are properly bound due to the way how we did the comparing between its _ADR and the _DOD's values. Solve this problem by comparing the lower 12 bits of both the device's _ADR and the _DOD's values instead of relying on bind result. Fixes: 0b8db271f159 ("ACPI / video: check _DOD list when creating backlight devices") Reported-and-tested-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-01Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-1/+23
Pull drm fixes from Dave Airlie: "Two i915 regressions and one dual-gpu laptop radeon fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails drm/i915: Cancel vdd off work before suspend drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
2014-11-30sh_eth: Fix sleeping function called from invalid contextMitsuhiro Kimura2-29/+36
This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30stmmac: platform: Move plat_dat checking earlierHuacai Chen1-9/+9
Original code only check/alloc plat_dat for the CONFIG_OF case, this patch check/alloc it earlier and unconditionally to avoid kernel build warnings: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:275 stmmac_pltfr_probe() warn: variable dereferenced before check 'plat_dat' V2: Fix coding style. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30sh_eth: Fix skb alloc size and alignment adjust rule.Mitsuhiro Kimura2-21/+15
In the current driver, allocation size of skb does not care the alignment adjust after allocation. And also, in the current implementation, buffer alignment method by sh_eth_set_receive_align function has a bug that this function displace buffer start address forcedly when the alignment is corrected. In the result, tail of the skb will exceed allocated area and kernel panic will be occurred. This patch fix this issue. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 23:57:01 +0300