| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes that did not make into my first pull request"
* tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: tpm_ibm_vtpm: Fix unallocated banks
tpm: Fix null pointer dereference on chip register error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"NAND:
- Fix Micron driver as some chips enable internal ECC correction
during their discovery while they advertize they do not have any.
Hyperbus:
- Restrict the build to only ARM64 SoCs (and compile testing) which
is what should have been done since the beginning.
- Fix Kconfig issue by selection something instead of implying it"
* tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: hyperbus: Add hardware dependency to AM654 driver
mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies
mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
|
|
The nr_allocated_banks and allocated banks are initialized as part of
tpm_chip_register. Currently, this is done as part of auto startup
function. However, some drivers, like the ibm vtpm driver, do not run
auto startup during initialization. This results in uninitialized memory
issue and causes a kernel panic during boot.
This patch moves the pcr allocation outside the auto startup function
into tpm_chip_register. This ensures that allocated banks are initialized
in any case.
Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
If clk_enable is not defined and chip initialization
is canceled code hits null dereference.
Easily reproducible with vTPM init fail:
swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy
BUG: kernel NULL pointer dereference, address: 00000000
...
Call Trace:
tpm_chip_start+0x9d/0xa0 [tpm]
tpm_chip_register+0x10/0x1a0 [tpm]
vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy]
process_one_work+0x214/0x5a0
worker_thread+0x134/0x3e0
? process_one_work+0x5a0/0x5a0
kthread+0xd4/0x100
? process_one_work+0x5a0/0x5a0
? kthread_park+0x90/0x90
ret_from_fork+0x19/0x24
Fixes: 719b7d81f204 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.3:
- Wire up the new clone3 syscall.
- A fix for the PAPR SCM nvdimm driver, to fix a crash when firmware
gives us a device that's attached to a non-online NUMA node.
- A fix for a boot failure on 32-bit with KASAN enabled.
- Three fixes for implicit fall through warnings, some of which are
errors for us due to -Werror.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Kees Cook, Santosh
Sivaraj, Stephen Rothwell"
* tag 'powerpc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kasan: fix early boot failure on PPC32
drivers/macintosh/smu.c: Mark expected switch fall-through
powerpc/spe: Mark expected switch fall-throughs
powerpc/nvdimm: Pick nearby online node if the device node is not online
powerpc/kvm: Fall through switch case explicitly
powerpc: Wire up clone3 syscall
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of driver fixes for the I2C subsystem"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: s3c2410: Mark expected switch fall-through
i2c: at91: fix clk_offset for sama5d2
i2c: at91: disable TXRDY interrupt after sending data
i2c: iproc: Fix i2c master read more than 63 bytes
eeprom: at24: make spd world-readable again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A small bunch of fixes from the irqchip department:
- Fix a couple of UAF on error paths (RZA1, GICv3 ITS)
- Fix iMX GPCv2 trigger setting
- Add missing of_node_put() on error path in MBIGEN
- Add another bunch of /* fall-through */ to silence warnings"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe()
irqchip/irq-imx-gpcv2: Forward irq type to parent
irqchip/irq-mbigen: Add of_node_put() before return
irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail
irqchip/gic-v3: Mark expected switch fall-through
|
|
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
drivers/acpi/scan.c: document why we don't need the device_hotplug_lock
memremap: move from kernel/ to mm/
lib/test_meminit.c: use GFP_ATOMIC in RCU critical section
asm-generic: fix -Wtype-limits compiler warnings
cgroup: kselftest: relax fs_spec checks
mm/memory_hotplug.c: remove unneeded return for void function
mm/migrate.c: initialize pud_entry in migrate_vma()
coredump: split pipe command whitespace before expanding template
page flags: prioritize kasan bits over last-cpuid
ubsan: build ubsan.c more conservatively
kasan: remove clang version check for KASAN_STACK
mm: compaction: avoid 100% CPU usage during compaction when a task is killed
mm: migrate: fix reference check race between __find_get_block() and migration
mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker
ocfs2: remove set but not used variable 'last_hash'
Revert "kmemleak: allow to coexist with fault injection"
kernel/signal.c: fix a kernel-doc markup
|
|
Let's document why the lock is not needed in acpi_scan_init(), right now
this is not really obvious.
[akpm@linux-foundation.org: fix tpyo]
Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more drm fixes from Daniel Vetter:
"Dave sends his pull, everyone realizes they've been asleep at the
wheel and hits send on their own pulls :-/
Normally I'd just ignore these all because w/e for me and Dave. But
this time around the latecomers also included drm-intel-fixes, which
failed to send out a -fixes pull thus far for this release (screwed up
vacation coverage, despite that 2/3 maintainers were around ... they
all look appropriately guilty), and that really is overdue to get
landed.
And since I had to do a pull request anyway I pulled the other two
late ones too.
intel fixes (didn't have any ever since the main merge window pull):
- gvt fixes (2 cc: stable)
- fix gpu reset vs mm-shrinker vs wakeup fun (needed a few patches)
- two gem locking fixes (one cc: stable)
- pile of misc fixes all over with minor impact, 6 cc: stable, others
from this window
exynos:
- misc minor fixes
misc:
- some build/Kconfig fixes
- regression fix for vm scalability perf test which seems to mostly
exercise dmesg/console logging ...
- the vgem cache flush fix for arm64 broke the world on x86, so
that's reverted again
* tag 'drm-fixes-2019-08-02-1' of git://anongit.freedesktop.org/drm/drm: (42 commits)
Revert "drm/vgem: fix cache synchronization on arm/arm64"
drm/exynos: fix missing decrement of retry counter
drm/exynos: add CONFIG_MMU dependency
drm/exynos: remove redundant assignment to pointer 'node'
drm/exynos: using dev_get_drvdata directly
drm/bochs: Use shadow buffer for bochs framebuffer console
drm/fb-helper: Instanciate shadow FB if configured in device's mode_config
drm/fb-helper: Map DRM client buffer only when required
drm/client: Support unmapping of DRM client buffers
drm/i915: Only recover active engines
drm/i915: Add a wakeref getter for iff the wakeref is already active
drm/i915: Lift intel_engines_resume() to callers
drm/vgem: fix cache synchronization on arm/arm64
drm/i810: Use CONFIG_PREEMPTION
drm/bridge: tc358764: Fix build error
drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m
drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.
drm/i915/gvt: grab runtime pm first for forcewake use
drm/i915/gvt: fix incorrect cache entry for guest page mapping
drm/i915/gvt: Checking workload's gma earlier
...
|
|
The hbmc-am654 driver is for the TI AM654, which is an ARM64 SoC, so
don't propose this driver on other architectures unless
build-testing.
Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
On x86_64, when CONFIG_OF is not disabled:
WARNING: unmet direct dependencies detected for MUX_MMIO
Depends on [n]: MULTIPLEXER [=y] && (OF [=n] || COMPILE_TEST [=n])
Selected by [y]:
- HBMC_AM654 [=y] && MTD [=y] && MTD_HYPERBUS [=y]
due to
config HBMC_AM654
tristate "HyperBus controller driver for AM65x SoC"
select MULTIPLEXER
select MUX_MMIO
Fix this by making HBMC_AM654 imply MUX_MMIO instead of select so
that dependencies are taken care of. MUX_MMIO is optional for
functioning of driver.
Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Some devices are not supposed to support on-die ECC but experience
shows that internal ECC machinery can actually be enabled through the
"SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter
Tables" returns that it is not.
Currently, the driver checks the "READ ID Parameter" field directly
after having enabled the feature. If the check fails it returns
immediately but leaves the ECC on. When using buggy chips like
MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will
go through the on-die ECC, confusing the host controller which is
supposed to be the one handling correction.
To address this in a common way we need to turn off the on-die ECC
directly after reading the "READ ID Parameter" and before checking the
"ECC status".
Cc: stable@vger.kernel.org
Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a small cleanup
- a fix for a build error on ARM with some configs
- a fix of a patch for the Xen gntdev driver
- three patches for fixing a potential problem in the swiotlb-xen
driver which Konrad was fine with me carrying them through the Xen
tree
* tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: remember having called xen_create_contiguous_region()
xen/swiotlb: simplify range_straddles_page_boundary()
xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()
xen: avoid link error on ARM
xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero()
xen/pciback: remove set but not used variable 'old_state'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Update the compat layer to allow single-byte watchpoints on all
addresses (similar to the native support)
- arm_pmu: fix the restoration of the counters on the
CPU_PM_ENTER_FAILED path
- Fix build regression with vDSO and Makefile not stripping
CROSS_COMPILE_COMPAT
- Fix the CTR_EL0 (cache type register) sanitisation on heterogeneous
machines (e.g. big.LITTLE)
- Fix the interrupt controller priority mask value when pseudo-NMIs are
enabled
- arm64 kprobes fixes: recovering of the PSTATE.D flag in the
single-step exception handler, NOKPROBE annotations for
unwind_frame() and walk_stackframe(), remove unneeded
rcu_read_lock/unlock from debug handlers
- Several gcc fall-through warnings
- Unused variable warnings
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Make debug exception handlers visible from RCU
arm64: kprobes: Recover pstate.D in single-step exception handler
arm64/mm: fix variable 'tag' set but not used
arm64/mm: fix variable 'pud' set but not used
arm64: Remove unneeded rcu_read_lock from debug handlers
arm64: unwind: Prohibit probing on return_address()
arm64: Lower priority mask for GIC_PRIO_IRQON
arm64/efi: fix variable 'si' set but not used
arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}
arm64: vdso: Fix Makefile regression
arm64: module: Mark expected switch fall-through
arm64: smp: Mark expected switch fall-through
arm64: hw_breakpoint: Fix warnings about implicit fallthrough
drivers/perf: arm_pmu: Fix failure path in PM notifier
arm64: compat: Allow single-byte watchpoints on all addresses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Default configs updates
- Minor qdio cleanup
- Sparse warnings fixes
- Implicit-fallthrough warnings fixes
* tag 's390-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough
vfio-ccw: make vfio_ccw_async_region_ops static
s390/3215: add switch fall through comment for -Wimplicit-fallthrough
s390/tape: add fallthrough annotations
s390/mm: add fallthrough annotations
s390/mm: make gmap_test_and_clear_dirty_pmd static
s390/kexec: add missing include to machine_kexec_reloc.c
s390/perf: make cf_diag_csd static
s390/lib: add missing include
s390/boot: add missing declarations and includes
s390: update configs
s390: clean up qdio.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes to four drivers with no core changes.
The mpt3sas one is theoretical until we get a CPU that goes up to 64
bits physical, the qla2xxx one fixes an oops in a driver
initialization error leg and the others are mostly cosmetic"
[ The fcoe patches may be worth highlighting - they may be "just"
cleanups, but they simplify and fix the odd fc_rport_priv structure
handling rules so that the new gcc-9 warnings about memset crossing
structure boundaries are gone.
The old code was hard for humans to understand too, and really
confused the compiler sanity checks - Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix possible fcport null-pointer dereferences
scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
scsi: hpsa: remove printing internal cdb on tag collision
scsi: hpsa: correct scsi command status issue after reset
scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv
scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
scsi: libfc: Whitespace cleanup in libfc.h
|
|
Pull block fixes from Jens Axboe:
"Here's a small collection of fixes that should go into this series.
This contains:
- io_uring potential use-after-free fix (Jackie)
- loop regression fix (Jan)
- O_DIRECT fragmented bio regression fix (Damien)
- Mark Denis as the new floppy maintainer (Denis)
- ataflop switch fall-through annotation (Gustavo)
- libata zpodd overflow fix (Kees)
- libata ahci deferred probe fix (Miquel)
- nbd invalidation BUG_ON() fix (Munehisa)
- dasd endless loop fix (Stefan)"
* tag 'for-linus-20190802' of git://git.kernel.dk/linux-block:
s390/dasd: fix endless loop after read unit address configuration
block: Fix __blkdev_direct_IO() for bio fragments
MAINTAINERS: floppy: take over maintainership
nbd: replace kill_bdev() with __invalidate_device() again
ata: libahci: do not complain in case of deferred probe
io_uring: fix KASAN use after free in io_sq_wq_submit_work
loop: Fix mount(2) failure due to race with LOOP_SET_FD
libata: zpodd: Fix small read overflow in zpodd_get_mech_type()
ataflop: Mark expected switch fall-through
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix NULL pointer and various whitespace issues with DM's recent DAX
code changes from commit in 5.3 merge"
* tag 'for-5.3/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: fix various whitespace issues with recent DAX code
dm table: fix dax_dev NULL dereference in device_synchronous()
|
|
Pull rdma fixes from Doug Ledford:
"Here's our second -rc pull request. Nothing particularly special in
this one. The client removal deadlock fix is kindy tricky, but we had
multiple eyes on it and no one could find a fault in it. A couple
Spectre V1 fixes too. Otherwise, all just normal -rc fodder:
- A couple Spectre V1 fixes (umad, hfi1)
- Fix a tricky deadlock in the rdma core code with refcounting
instead of locks (client removal patches)
- Build errors (hns)
- Fix a scheduling while atomic issue (mlx5)
- Use after free fix (mad)
- Fix error path return code (hns)
- Null deref fix (siw_crypto_hash)
- A few other misc. minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp()
RDMA/mlx5: Release locks during notifier unregister
IB/hfi1: Fix Spectre v1 vulnerability
IB/mad: Fix use-after-free in ib mad completion handling
RDMA/restrack: Track driver QP types in resource tracker
IB/mlx5: Fix MR registration flow to use UMR properly
RDMA/devices: Remove the lock around remove_client_context
RDMA/devices: Do not deadlock during client removal
IB/core: Add mitigation for Spectre V1
Do not dereference 'siw_crypto_shash' before checking
RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes
RDMA/hns: Fix build error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix recent regression affecting ACPI device power management"
* tag 'pm-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Fix regression in acpi_device_set_power()
|
|
Pull drm fixes from Dave Airlie:
"Thanks to Daniel for handling the email the last couple of weeks, flus
and break-ins combined to derail me. Surprised nothing materialised
today to take me out again.
Just more amdgpu navi fixes, msm fixes and a single nouveau regression
fix:
amdgpu:
- navi10 temperature and pstate fixes
- vcn dynamic power management fix
- CS ioctl error handling fix
- debugfs info leak fix
- amdkfd VegaM fix
msm:
- dma sync call fix
- mdp5 dsi command mode fix
- fall-through fixes
- disabled GPU fix
nouveau:
- regression fix for displayport MST support"
* tag 'drm-fixes-2019-08-02' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau: Only release VCPI slots on mode changes
drm: msm: Fix add_gpu_components
drm/msm: Annotate intentional switch statement fall throughs
drm/msm: add support for per-CRTC max_vblank_count on mdp5
drm/msm: Use the correct dma_sync calls in msm_gem
drm/amd/powerplay: correct UVD/VCE/VCN power status retrieval
drm/amd/powerplay: correct Navi10 VCN powergate control (v2)
drm/amd/powerplay: support VCN powergate status retrieval for SW SMU
drm/amd/powerplay: support VCN powergate status retrieval on Raven
drm/amd/powerplay: add new sensor type for VCN powergate status
drm/amdgpu: fix a potential information leaking bug
drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep
drm/amd/powerplay: enable SW SMU reset functionality
drm/amd/powerplay: fix null pointer dereference around dpm state relates
drm/amdgpu/powerplay: use proper revision id for navi
drm/amd/powerplay: fix temperature granularity error in smu11
drm/amd/powerplay: add callback function of get_thermal_temperature_range
drm/amdkfd: Fix byte align on VegaM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few fixes for code that came in during the merge window or that
started getting exercised differently this time around:
- Select regmap MMIO kconfig in spreadtrum driver to avoid compile
errors
- Complete kerneldoc on devm_clk_bulk_get_optional()
- Register an essential clk earlier on mediatek mt8183 SoCs so the
clocksource driver can use it
- Fix divisor math in the at91 driver
- Plug a race in Renesas reset control logic"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: renesas: cpg-mssr: Fix reset control race condition
clk: sprd: Select REGMAP_MMIO to avoid compile errors
clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource
clk: Add missing documentation of devm_clk_bulk_get_optional() argument
clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Two cleanup patches
. use dev_get_drvdata for readability instead of platform_get_drvdata
. remove redundant assignment to node.
- Two fixup patches
. fix undefined reference to 'vmf_insert_mixed' with NOMMU configuration.
. fix potential infinite spin issue by decrementing 'retry' variable in
scaler_reset function of exynos_drm_scaler.c
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564734791-745-1-git-send-email-inki.dae@samsung.com
|
|
commit 7e9e5ead55be ("drm/vgem: fix cache synchronization on arm/arm64")
broke all of the !llc i915-vgem coherency tests in CI, and left the HW
very, very unhappy (which is even more scary).
Fixes: 7e9e5ead55be ("drm/vgem: fix cache synchronization on arm/arm64")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801124458.24949-1-chris@chris-wilson.co.uk
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.3-rc3:
- Fix some build errors in drm/bridge.
- Do not build i810 on CONFIG_PREEMPTION.
- Fix cache sync on arm in vgem.
- Allow mapping fb in drm_client only when required, and use it to fix bochs fbdev.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af0dc371-16e0-cee8-0d71-4824d44aa973@linux.intel.com
|
|
Silence the following warnings when built with -Wimplicit-fallthrough=3
enabled by default since 5.3-rc2:
In file included from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:51,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:6,
from ./include/linux/slab.h:15,
from drivers/s390/crypto/ap_queue.c:13:
drivers/s390/crypto/ap_queue.c: In function 'ap_sm_recv':
./include/linux/list.h:577:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
577 | for (pos = list_first_entry(head, typeof(*pos), member); \
| ^~~
drivers/s390/crypto/ap_queue.c:147:3: note: in expansion of macro 'list_for_each_entry'
147 | list_for_each_entry(ap_msg, &aq->pendingq, list) {
| ^~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/ap_queue.c:155:2: note: here
155 | case AP_RESPONSE_NO_PENDING_REPLY:
| ^~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ep11_xcrb':
drivers/s390/crypto/zcrypt_msgtype6.c:871:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
871 | if (msg->cprbx.cprb_ver_id == 0x04)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:874:2: note: here
874 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_rng':
drivers/s390/crypto/zcrypt_msgtype6.c:901:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
901 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:907:2: note: here
907 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_xcrb':
drivers/s390/crypto/zcrypt_msgtype6.c:838:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
838 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:844:2: note: here
844 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ica':
drivers/s390/crypto/zcrypt_msgtype6.c:801:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
801 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:808:2: note: here
808 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
Acked-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.3-rc3:
- GVT fixes
- Fix TBT aux powerwell
- Fix PSR2 training pattern duration
- Fix memory leak in runtime wakeref tracking
- Fix ICL memory bandwidth issue preventing planes from being enabled
- Fix OA mux configuration delays for accurate performance data
- Fix VLV/CHV DP audio cdclk frequency requirements
- Fix register whitelisting to fix a number of GL & Vulkan CTS tests
- Fix ICL perf register offsets
- Fix Gen11 Sampler Prefetch workaround, impacting dEQP tests
- Fix various gen2 tracepoints
- A number of GEM locking fixes addressing lockdep issues
- Fix idle engine reset, recover only active engines
- Fix incorrect MCR programming
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87d0hnncgo.fsf@intel.com
|
|
Currently the retry counter is not being decremented, leading to a
potential infinite spin if the scalar_reads don't change state.
Addresses-Coverity: ("Infinite loop")
Fixes: 280e54c9f614 ("drm/exynos: scaler: Reset hardware before starting the operation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Compile-testing this driver on a NOMMU configuration shows a link failure:
drivers/gpu/drm/exynos/exynos_drm_gem.o: In function `exynos_drm_gem_fault':
exynos_drm_gem.c:(.text+0x484): undefined reference to `vmf_insert_mixed'
Add a CONFIG_MMU dependency to ensure we only enable this in configurations
that build correctly.
Many other drm drivers have the same dependency. It would be nice to
make this work in MMU-less configurations, but evidently nobody has
ever needed this so far.
Fixes: 156bdac99061 ("drm/exynos: trigger build of all modules")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
|
|
The pointer 'node' is being assigned with a value that is never
read and is re-assigned later. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
|
|
Several drivers cast a struct device pointer to a struct
platform_device pointer only to then call platform_get_drvdata().
To improve readability, these constructs can be simplified
by using dev_get_drvdata() directly.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.
In the system log there will be ongoing DASD error messages with RC: -19.
The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.
Prevent an endless loop by handling those cases separately.
Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org # 2.6.25+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
into drm-fixes
- Fix the dma_sync calls applied last week (Rob)
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 02 Aug 2019 05:54:27 AM AEST
# gpg: using RSA key 96F70DFDA84A070A
# gpg: Can't check signature: public key not found
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801200439.GV104440@art_vandelay
|
|
Looks like a regression got introduced into nv50_mstc_atomic_check()
that somehow didn't get found until now. If userspace changes
crtc_state->active to false but leaves the CRTC enabled, we end up
calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in
asyh->dp.pbn. However, if the display is inactive we end up calculating
a PBN of 0, which inadvertently causes us to have an allocation of 0.
>From there, if userspace then disables the CRTC afterwards we end up
accidentally attempting to free the VCPI twice:
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
Call Trace:
drm_atomic_helper_check_modeset+0x3f3/0xa60 [drm_kms_helper]
? drm_atomic_check_only+0x43/0x780 [drm]
drm_atomic_helper_check+0x15/0x90 [drm_kms_helper]
nv50_disp_atomic_check+0x83/0x1d0 [nouveau]
drm_atomic_check_only+0x54d/0x780 [drm]
? drm_atomic_set_crtc_for_connector+0xec/0x100 [drm]
drm_atomic_commit+0x13/0x50 [drm]
drm_atomic_helper_set_config+0x81/0x90 [drm_kms_helper]
drm_mode_setcrtc+0x194/0x6a0 [drm]
? vprintk_emit+0x16a/0x230
? drm_ioctl+0x163/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
drm_ioctl_kernel+0xaa/0xf0 [drm]
drm_ioctl+0x208/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
nouveau_drm_ioctl+0x63/0xb0 [nouveau]
do_vfs_ioctl+0x405/0x660
? recalc_sigpending+0x17/0x50
? _copy_from_user+0x37/0x60
ksys_ioctl+0x5e/0x90
? exit_to_usermode_loop+0x92/0xe0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x59/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
---[ end trace 4c395c0c51b1f88d ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for
[MST PORT:00000000e288eb7d] found in mst state 000000008e642070
So, fix this by doing what we probably should have done from the start: only
call drm_dp_atomic_find_vcpi_slots() when crtc_state->mode_changed is set, so
that VCPI allocations remain for as long as the CRTC is enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801220216.15323-1-lyude@redhat.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.3-2019-07-31:
amdgpu:
- Fix temperature granularity for navi
- Fix stable pstate setting for navi
- Fix VCN DPM enablement on navi
- Fix error handling on CS ioctl when processing dependencies
- Fix possible information leak in debugfs
amdkfd:
- fix memory alignment for VegaM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731191648.25729-1-alexander.deucher@amd.com
|
|
Commit f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.
Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.
Fixes: f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/i2c/busses/i2c-s3c2410.c: In function 'i2c_s3c_irq_nextbyte':
drivers/i2c/busses/i2c-s3c2410.c:431:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (i2c->state == STATE_READ)
^
drivers/i2c/busses/i2c-s3c2410.c:439:2: note: here
case STATE_WRITE:
^~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock
offset of 3 cycles (compared to 4 in eg. SAMA5D3).
Cc: stable@vger.kernel.org # 5.2.x
[needs applying to i2c-at91.c instead for earlier kernels]
Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Driver was not disabling TXRDY interrupt after last TX byte.
This caused interrupt storm until transfer timeouts for slow
or broken device on the bus. The patch fixes the interrupt storm
on my SAMA5D2-based board.
Cc: stable@vger.kernel.org # 5.2.x
[v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
Fixes: fac368a04048 ("i2c: at91: add new driver")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
A small bunch of fixes from the irqchip department:
- Fix a couple of UAF on error paths (RZA1, GICv3 ITS)
- Fix iMX GPCv2 trigger setting
- Add missing of_node_put on error path in MBIGEN
- Add another bunch of /* fall-through */ to silence warnings
|
|
Fix to return error code -ENOMEM from the rdma_zalloc_drv_obj() error
handling case instead of 0, as done elsewhere in this function.
Fixes: e8ac9389f0d7 ("RDMA: Fix allocation failure on pointer pd")
Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801012725.150493-1-weiyongjun1@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes. This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched. This prevents display from initing if a GPU node is
defined, but it's status is disabled.
Fix this by checking the node's status before adding it to the match list.
Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com
|
|
The below kernel panic was observed when created bond mode LACP
with GRE tunnel on top. The reason to it was not released spinlock
during mlx5 notify unregsiter sequence.
[ 234.562007] BUG: scheduling while atomic: sh/10900/0x00000002
[ 234.563005] Preemption disabled at:
[ 234.566864] ------------[ cut here ]------------
[ 234.567120] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 234.567139] WARNING: CPU: 16 PID: 10900 at kernel/sched/core.c:3203 preempt_count_sub+0xca/0x170
[ 234.569550] CPU: 16 PID: 10900 Comm: sh Tainted: G W 5.2.0-rc1-for-linust-dbg-2019-05-25_04-57-33-60 #1
[ 234.569886] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.6.1 02/12/2018
[ 234.570183] RIP: 0010:preempt_count_sub+0xca/0x170
[ 234.570404] Code: 03 38
d0 7c 08 84 d2 0f 85 b0 00 00 00 8b 15 dd 02 03 04 85 d2 75 ba 48 c7 c6
00 e1 88 83 48 c7 c7 40 e1 88 83 e8 76 11 f7 ff <0f> 0b 5b c3 65 8b 05
d3 1f d8 7e 84 c0 75 82 e8 62 c3 c3 00 85 c0
[ 234.570911] RSP: 0018:ffff888b94477b08 EFLAGS: 00010286
[ 234.571133] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 234.571391] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000246
[ 234.571648] RBP: ffff888ba5560000 R08: fffffbfff08962d5 R09: fffffbfff08962d5
[ 234.571902] R10: 0000000000000001 R11: fffffbfff08962d4 R12: ffff888bac6e9548
[ 234.572157] R13: ffff888babfaf728 R14: ffff888bac6e9568 R15: ffff888babfaf750
[ 234.572412] FS: 00007fcafa59b740(0000) GS:ffff888bed200000(0000) knlGS:0000000000000000
[ 234.572686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 234.572914] CR2: 00007f984f16b140 CR3: 0000000b2bf0a001 CR4: 00000000001606e0
[ 234.573172] Call Trace:
[ 234.573336] _raw_spin_unlock+0x2e/0x50
[ 234.573542] mlx5_ib_unbind_slave_port+0x1bc/0x690 [mlx5_ib]
[ 234.573793] mlx5_ib_cleanup_multiport_master+0x1d3/0x660 [mlx5_ib]
[ 234.574039] mlx5_ib_stage_init_cleanup+0x4c/0x360 [mlx5_ib]
[ 234.574271] ? kfree+0xf5/0x2f0
[ 234.574465] __mlx5_ib_remove+0x61/0xd0 [mlx5_ib]
[ 234.574688] ? __mlx5_ib_remove+0xd0/0xd0 [mlx5_ib]
[ 234.574951] mlx5_remove_device+0x234/0x300 [mlx5_core]
[ 234.575224] mlx5_unregister_device+0x4d/0x1e0 [mlx5_core]
[ 234.575493] remove_one+0x4f/0x160 [mlx5_core]
[ 234.575704] pci_device_remove+0xef/0x2a0
[ 234.581407] ? pcibios_free_irq+0x10/0x10
[ 234.587143] ? up_read+0xc1/0x260
[ 234.592785] device_release_driver_internal+0x1ab/0x430
[ 234.598442] unbind_store+0x152/0x200
[ 234.604064] ? sysfs_kf_write+0x3b/0x180
[ 234.609441] ? sysfs_file_ops+0x160/0x160
[ 234.615021] kernfs_fop_write+0x277/0x440
[ 234.620288] ? __sb_start_write+0x1ef/0x2c0
[ 234.625512] vfs_write+0x15e/0x460
[ 234.630786] ksys_write+0x156/0x1e0
[ 234.635988] ? __ia32_sys_read+0xb0/0xb0
[ 234.641120] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 234.646163] do_syscall_64+0x95/0x470
[ 234.651106] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 234.656004] RIP: 0033:0x7fcaf9c9cfd0
[ 234.660686] Code: 73 01
c3 48 8b 0d c0 6e 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00
83 3d cd cf 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73
31 c3 48 83 ec 08 e8 ee cb 01 00 48 89 04 24
[ 234.670128] RSP: 002b:00007ffd3b01ddd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 234.674811] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fcaf9c9cfd0
[ 234.679387] RDX: 000000000000000d RSI: 00007fcafa5c1000 RDI: 0000000000000001
[ 234.683848] RBP: 00007fcafa5c1000 R08: 000000000000000a R09: 00007fcafa59b740
[ 234.688167] R10: 00007ffd3b01d8e0 R11: 0000000000000246 R12: 00007fcaf9f75400
[ 234.692386] R13: 000000000000000d R14: 0000000000000001 R15: 0000000000000000
[ 234.696495] irq event stamp: 153067
[ 234.700525] hardirqs last enabled at (153067): [<ffffffff83258c39>] _raw_spin_unlock_irqrestore+0x59/0x70
[ 234.704665] hardirqs last disabled at (153066): [<ffffffff83259382>] _raw_spin_lock_irqsave+0x22/0x90
[ 234.708722] softirqs last enabled at (153058): [<ffffffff836006c5>] __do_softirq+0x6c5/0xb4e
[ 234.712673] softirqs last disabled at (153051): [<ffffffff81227c1d>] irq_exit+0x17d/0x1d0
[ 234.716601] ---[ end trace 5dbf096843ee9ce6 ]---
Fixes: df097a278c75 ("IB/mlx5: Use the new mlx5 core notifier API")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731083852.584-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
Fix this by sanitizing sl before using it to index ibp->sl_to_sc.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We encountered a use-after-free bug when unloading the driver:
[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640] dump_stack+0x9a/0xeb
[ 3562.126911] print_address_description+0xe3/0x2e0
[ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545] __kasan_report+0x15c/0x1df
[ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174] kasan_report+0xe/0x20
[ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158] ? qlist_free_all+0x51/0xb0
[ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833] ? quarantine_reduce+0x1fa/0x270
[ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577] process_one_work+0x90c/0x1860
[ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320] worker_thread+0x87/0xbb0
[ 3562.156687] ? __kthread_parkme+0xb6/0x180
[ 3562.158058] ? process_one_work+0x1860/0x1860
[ 3562.159429] kthread+0x320/0x3e0
[ 3562.161391] ? kthread_park+0x120/0x120
[ 3562.162744] ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602] save_stack+0x19/0x80
[ 3562.189586] __kasan_slab_free+0x11d/0x160
[ 3562.190571] kfree+0xf5/0x2f0
[ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514] disable_device+0x14e/0x260 [ib_core]
[ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329] __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288] do_syscall_64+0x95/0x470
[ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe
The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).
We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().
Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.
Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.
Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The check for QP type different than XRC has excluded driver QP
types from the resource tracker.
As a result, "rdma resource show" user command would not show opened
driver QPs which does not reflect the real state of the system.
Check QP type explicitly instead of assuming enum values/ordering.
Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801104354.11417-1-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.
Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Due to the complexity of client->remove() callbacks it is desirable to not
hold any locks while calling them. Remove the last one by tracking only
the highest client ID and running backwards from there over the xarray.
Since the only purpose of that lock was to protect the linked list, we can
drop the lock.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
lockdep reports:
WARNING: possible circular locking dependency detected
modprobe/302 is trying to acquire lock:
0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990
but task is already holding lock:
000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&device->client_data_rwsem){++++}:
down_read+0x3f/0x160
ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
cm_process_work+0x29/0x110 [ib_cm]
cm_req_handler+0x10f5/0x1c00 [ib_cm]
cm_work_handler+0x54c/0x311d [ib_cm]
process_one_work+0x4aa/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
process_one_work+0x45f/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #0 ((wq_completion)ib_cm){+.+.}:
lock_acquire+0xc8/0x1d0
flush_workqueue+0x102/0x990
cm_remove_one+0x30e/0x3c0 [ib_cm]
remove_client_context+0x94/0xd0 [ib_core]
disable_device+0x10a/0x1f0 [ib_core]
__ib_unregister_device+0x5a/0xe0 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
__mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
mlx5_remove_device+0x144/0x150 [mlx5_core]
mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
__x64_sys_delete_module+0x227/0x350
do_syscall_64+0xc3/0x6a4
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.
The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.
Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.
This will fence the two unregistration paths without holding any locks.
Cc: <stable@vger.kernel.org>
Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
