summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-12-06target: Improve system responsivity during I/OBart Van Assche1-2/+0
While testing ib_srpt I noticed that the target system became rather unresponsive during intensive I/O. The patch below made my target system responsive again during I/O without decreasing performance. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06iscsi-target: Fix sess allocation leak in iscsi_login_zero_tsih_s1Nicholas Bellinger1-5/+8
This patch adds missing kfree() for an allocation in iscsi_login_zero_tsih_s1() code, and make transport_init_session() check for IS_ERR() returns. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Address legacy PYX_TRANSPORT_* return code breakageNicholas Bellinger14-276/+280
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06pasemi_mac: Fix building as moduleBen Hutchings1-1/+2
Commit ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06netback: Fix alert message.Wei Liu1-1/+1
The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds1-5/+16
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT
2011-12-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intr_remapping: Fix section mismatch in ir_dev_scope_init() intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev() x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions x86, AMD: Correct align_va_addr documentation x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms x86/mrst: Battery fixes x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode x86: Fix "Acer Aspire 1" reboot hang x86/mtrr: Resolve inconsistency with Intel processor manual x86: Document rdmsr_safe restrictions x86, microcode: Fix the failure path of microcode update driver init code Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup x86/mpparse: Account for bus types other than ISA and PCI x86, mrst: Change the pmic_gpio device type to IPC mrst: Added some platform data for the SFI translations x86,mrst: Power control commands update x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot x86, UV: Fix UV2 hub part number x86: Add user_mode_vm check in stack_overflow_check
2011-12-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-5/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix loss of notification with multi-event perf, x86: Force IBS LVT offset assignment for family 10h perf, x86: Disable PEBS on SandyBridge chips trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter perf session: Fix crash with invalid CPU list perf python: Fix undefined symbol problem perf/x86: Enable raw event access to Intel offcore events perf: Don't use -ENOSPC for out of PMU resources perf: Do not set task_ctx pointer in cpuctx if there are no events in the context perf/x86: Fix PEBS instruction unwind oprofile, x86: Fix crash when unloading module (nmi timer mode) oprofile: Fix crash when unloading module (hr timer mode)
2011-12-06Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-15/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: Set noop handler in clockevents_exchange_device() tick-broadcast: Stop active broadcast device when replacing it clocksource: Fix bug with max_deferment margin calculation rtc: Fix some bugs that allowed accumulating time drift in suspend/resume rtc: Disable the alarm in the hardware
2011-12-06Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds8-66/+111
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] ap: Setup timer for sending messages after reset. [S390] cio: fix chsc_chp_vary [S390] cio: provide fake irb for transport mode IO [S390] cio: disallow driver io for known to be broken paths [S390] hibernate: directly trigger subchannel evaluation [S390] remove reset of system call restart on psw changes [S390] add missing .set function for NT_S390_LAST_BREAK regset [S390] fix page change underindication in pgste_update_all [S390] ptrace inferior call interactions with TIF_SYSCALL [S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check
2011-12-06r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.françois romieu1-8/+3
Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06r8169: Rx FIFO overflow fixes.françois romieu1-25/+17
Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06gpio: fix a build failure on KS8695 GPIOLinus Walleij1-1/+1
I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-05toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENTSeth Forshee1-5/+16
The Satellite C670-10V generates notifications for hotkeys but does not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed it gets stuck in an infinite loop in toshiba_acpi_notify. To fix this, detect whether or not HCI_SYSTEM_EVENT is supported up-front and don't try to read system events if it isn't supported. In addition, limit the number of retries when reading HCI_SYSTEM_EVENT fails so that this loop cannot run unbounded. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-12-05intr_remapping: Fix section mismatch in ir_dev_scope_init()Sergey Senozhatsky1-1/+1
Fix: Section mismatch in reference from the function ir_dev_scope_init() to the function .init.text:dmar_dev_scope_init() The function ir_dev_scope_init() references the function __init dmar_dev_scope_init(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Youquan Song <youquan.song@intel.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfish Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev()Sergey Senozhatsky1-1/+1
dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and atsr_parse_dev() which are both marked as __init. Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfish Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86/mrst: Battery fixesMajor Lee1-6/+6
When DCDC input line over current detecting, PMIC will change charging current automatically. Logging event is enough. Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> [fix build] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05Merge branch 'master' of ↵John W. Linville9-42/+65
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-04arch/tile: use new generic {enable,disable}_percpu_irq() routinesChris Metcalf1-2/+2
We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-12-04drivers/net/ethernet/tile: use skb_frag_page() APIChris Metcalf1-2/+2
This replaces raw access to the "page" field of the skb_frag_t. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-12-03Merge branch 'usb-linus' of ↵Linus Torvalds21-95/+99
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) usb: ftdi_sio: add PID for Propox ISPcable III Revert "xHCI: reset-on-resume quirk for NEC uPD720200" xHCI: fix bug in xhci_clear_command_ring() usb: gadget: fsl_udc: fix dequeuing a request in progress usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC type usb: fsl_mxc_udc.c: Fix build issue by including missing header file USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFER usb: udc: Fix gadget driver's speed check in various UDC drivers usb: gadget: fix g_serial regression usb: renesas_usbhs: fixup driver speed usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop. usb: renesas_usbhs: fixup signal the driver that cable was disconnected usb: renesas_usbhs: fixup device_register timing usb: musb: PM: fix context save/restore in suspend/resume path USB: linux-cdc-acm.inf: add support for the acm_ms gadget EHCI : Fix a regression in the ISO scheduler xHCI: reset-on-resume quirk for NEC uPD720200 USB: whci-hcd: fix endian conversion in qset_clear() USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 usb: option: add SIMCom SIM5218 ...
2011-12-03Merge branch 'staging-linus' of ↵Linus Torvalds4-30/+84
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: comedi: fix integer overflow in do_insnlist_ioctl() Revert "Staging: comedi: integer overflow in do_insnlist_ioctl()" Staging: comedi: integer overflow in do_insnlist_ioctl() Staging: comedi: fix signal handling in read and write Staging: comedi: fix mmap_count staging: comedi: fix oops for USB DAQ devices. staging: comedi: usbduxsigma: Fixed wrong range for the analogue channel. staging:rts_pstor:Complete scanning_done variable staging: usbip: bugfix for deadlock
2011-12-02iwlwifi: change the default behavior of watchdog timerWey-Yi Guy6-9/+26
The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02iwlwifi: do not re-configure HT40 after associatedWey-Yi Guy3-28/+28
The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87 kernel: [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407 kernel: [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87 kernel: [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3 kernel: [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff8104ba97>] ? kthread+0x7a/0x82 kernel: [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10 kernel: [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11 kernel: [<ffffffff813d21b0>] ? gs_change+0xb/0xb Cc: <stable@kernel.org> 3.1+ Reported-by: Udo Steinberg <udo@hypervisor.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02iwlagn: fix HW crypto for TX-only keysJohannes Berg2-5/+11
Group keys in IBSS or AP mode are not programmed into the device since we give the key to it with every TX packet. However, we do need mac80211 to create the MMIC & PN in all cases. Move the code around to set the key flags all the time. We set them even when the key is removed again but that is obviously harmless. Cc: stable@vger.kernel.org Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Correct General touch PID
2011-12-02Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds19-48/+341
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: integer overflow in vmw_kms_update_layout_ioctl() drm/radeon/kms: fix 2D tiling CS support on EG/CM drm/radeon/kms: fix scanout of 2D tiled buffers on EG/CM drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL) drm/radeon/kms: add some new pci ids drm/radeon/kms: Skip ACPI call to ATIF when possible drm/radeon/kms: Hide debugging message drm/radeon/kms: add some loop timeouts in pageflip code drm/nv50/disp: silence compiler warning drm/nouveau: fix oopses caused by clear being called on unpopulated ttms drm/nouveau: Keep RAMIN heap within the channel. drm/nvd0/disp: fix sor dpms typo, preventing dpms on in some situations drm/nvc0/gr: fix TP init for transform feedback offset queries drm/nouveau: add dumb ioctl support
2011-12-02Merge branch 'for-linus' of ↵Linus Torvalds1-23/+58
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LED ALSA: hda_intel - revert a quirk that affect VIA chipsets ALSA: hda - Avoid touching mute-VREF pin for IDT codecs firmware: Sigma: Fix endianess issues firmware: Sigma: Skip header during CRC generation firmware: Sigma: Prevent out of bounds memory access ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer ASoC: Supply dcs_codes for newer WM1811 revisions ASoC: Error out if we can't generate a LRCLK at all for WM8994 ASoC: Correct name of Speyside Main Speaker widget ASoC: skip resume of soc-audio devices without codecs ASoC: cs42l51: Fix off-by-one for reg_cache_size ASoC: drop support for PlayPaq with WM8510 ASoC: mpc8610: tell the CS4270 codec that it's the master ASoC: cs4720: use snd_soc_cache_sync() ASoC: SAMSUNG: Fix build error ASoC: max9877: Update register if either val or val2 is changed ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSET
2011-12-02vmwgfx: integer overflow in vmw_kms_update_layout_ioctl()Xi Wang1-5/+6
There are two issues in vmw_kms_update_layout_ioctl(). First, the for loop forgets to index rects and only checks the first element. Second, there is a potential integer overflow if userspace passes in a large arg->num_outputs. The call to kzalloc() would allocate a small buffer, leading to out-of-bounds read. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-02drm/radeon/kms: fix 2D tiling CS support on EG/CMAlex Deucher2-26/+154
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-02drm/radeon/kms: fix scanout of 2D tiled buffers on EG/CMAlex Deucher2-2/+62
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-02drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL)Chris Wilson1-2/+25
Disabling the CRTC by setting its framebuffer to NULL, as used by drm_framebuffer_cleanup(), was failing to pass the current framebuffer to the crtc_func->disable callback. This is because of the dance within drm_crtc_helper_set_config to pass the new_fb (NULL in this case) to the drm_crtc_helper_set_mode with the currently attached fb as a parameter. drm_crtc_helper_set_mode treats this as a no-op and the encoder is still enabled. And so the current fb is forgotten before the call to drm_helper_disable_unused_functions. This patch treats disabling the CRTC as a simple special case rather than adding further complexity into the configuration logic. This fixes a pin-leak of the fb bo on Xserver close. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds23-64/+222
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS ipv4: flush route cache after change accept_local sch_red: fix red_change Revert "udp: remove redundant variable" bridge: master device stuck in no-carrier state forever when in user-stp mode ipv4: Perform peer validation on cached route lookup. net/core: fix rollback handler in register_netdevice_notifier sch_red: fix red_calc_qavg_from_idle_time bonding: only use primary address for ARP ipv4: fix lockdep splat in rt_cache_seq_show sch_teql: fix lockdep splat net: fec: Select the FEC driver by default for i.MX SoCs isdn: avoid copying too long drvid isdn: make sure strings are null terminated netlabel: Fix build problems when IPv6 is not enabled sctp: better integer overflow check in sctp_auth_create_key() sctp: integer overflow in sctp_auth_create_key() ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. net: Fix corruption in /proc/*/net/dev_mcast mac80211: fix race between the AGG SM and the Tx data path ...
2011-12-01Merge branch 'fixes' of ↵Linus Torvalds2-2/+2
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
2011-12-01Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman2-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: Revert "xHCI: reset-on-resume quirk for NEC uPD720200" xHCI: fix bug in xhci_clear_command_ring()
2011-12-01usb: ftdi_sio: add PID for Propox ISPcable IIIMarcin Kościelnicki2-0/+2
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-01Revert "xHCI: reset-on-resume quirk for NEC uPD720200"Sarah Sharp1-6/+1
This reverts commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com>
2011-12-01xHCI: fix bug in xhci_clear_command_ring()Andiry Xu1-1/+4
When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Oliver Neukum <oneukum@suse.de>
2011-12-01[S390] ap: Setup timer for sending messages after reset.Holger Dengler1-0/+2
Setup timer for processing messages in request queue after a successful AP bus device reset. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-01[S390] cio: fix chsc_chp_varySebastian Ott1-5/+2
The functions called by chsc_chp_vary operate on pointers to channel path ids not channel path links. (This worked by chance since the id is the first member of the link structure) Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-01[S390] cio: provide fake irb for transport mode IOSebastian Ott3-10/+37
If a driver wants to do command mode IO while CIO is doing online path verification we ignore this request and provide a fake irb when we are done and the driver can do IO again. For transport mode IO we have no such mechanism, giving the driver no other chance then to retry the action until we are done. This is not very reliable. Provide a fake irb for transport mode IO as well. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-01[S390] cio: disallow driver io for known to be broken pathsSebastian Ott1-4/+4
When a driver requests to do IO, we will adjust the mask of paths to be used to exclude varied offline paths. Drivers trying to do IO solely on paths which are online but some way defective may lack the information to do proper error handling. There is no reason to allow the usage of known to be broken paths. Thus restrict the paths a ccw driver can use for IO to a subset of the paths cio found usable (this also excludes offline paths). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-01[S390] hibernate: directly trigger subchannel evaluationSebastian Ott3-47/+66
Using the generic css_schedule_eval to evaluate subchannels while resuming from hibernation is very slow when used with many devices. Provide a new evaluation trigger which exploits css_sched_sch_todo and use this in the resume callback for ccw devices. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-01drm/radeon/kms: Skip ACPI call to ATIF when possibleJean Delvare1-4/+4
I am under the impression that it only makes sense to call the ATIF method if the graphics device has an ACPI handle attached. So we could skip the call altogether if there is no such handle. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-01drm/radeon/kms: Hide debugging messageJean Delvare1-1/+2
Use the proper macro to issue the debugging message in radeon_atif_call(). Otherwise we spam the log of many systems with a message which looks like an error message of unknown origin, and could thus confuse the user. Commit dc77de12dde95c8da39e4c417eb70c7d445cf84b was a first step in this direction, but was not sufficient IMHO. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-01drm/radeon/kms: add some loop timeouts in pageflip codeAlex Deucher4-4/+24
Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-01Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie8-4/+64
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv50/disp: silence compiler warning drm/nouveau: fix oopses caused by clear being called on unpopulated ttms drm/nouveau: Keep RAMIN heap within the channel. drm/nvd0/disp: fix sor dpms typo, preventing dpms on in some situations drm/nvc0/gr: fix TP init for transform feedback offset queries drm/nouveau: add dumb ioctl support
2011-12-01bonding: only use primary address for ARPHenrik Saavedra Persson1-27/+6
Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson <henrik.e.persson@ericsson.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-12-01Merge branch 'for-linus' of ↵Linus Torvalds10-45/+62
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Fix RCU lockdep splats IB/ipoib: Prevent hung task or softlockup processing multicast response IB/qib: Fix over-scheduling of QSFP work RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2 RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic IB/qib: Don't use schedule_work()
2011-12-01Merge branch 'dt-for-linus' of git://sources.calxeda.com/kernel/linuxLinus Torvalds1-0/+2
* 'dt-for-linus' of git://sources.calxeda.com/kernel/linux: of: Add Silicon Image vendor prefix of/irq: of_irq_init: add check for parent equal to child node
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 02:04:25 +0300