summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-12-20s390/qeth: replace open-coded in*_pton()Julian Wiedmann3-89/+12
There's a common helper for parsing an IP address string, let's use it. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: pass full data length to l3_fill_header()Julian Wiedmann1-8/+10
The TSO and IQD paths already need to fix-up the current values, and OSA will require more flexibility in the future as well. So just let the caller specify the data length. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: streamline l3_fill_header()Julian Wiedmann1-56/+43
Consolidate the cast type translation, move the passthru path out of the RCU-guarded section, and use the appropriate rtable helpers when determining the next-hop address. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: unionize next-hop field in qeth L3 headerJulian Wiedmann2-8/+23
The L3 packet descriptor's 'dest_addr' field is used for a different purpose in RX descriptors. Clean up the hard-coded byte accesses and try to be more self-documenting. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: recognize non-IP multicast on L3 transmitJulian Wiedmann2-5/+1
When 1. an skb has no neighbour, and 2. skb->protocol is not IP[V6], we select the skb's cast type based on its destination MAC address. The multicast check is currently restricted to Multicast IP-mapped MACs. Extend it to also cover non-IP Multicast MACs. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: clean up l3_get_cast_type()Julian Wiedmann2-35/+20
Use the proper helpers to check for multicast IP addressing, and remove some ancient Token Ring code. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: robustify qeth_get_ip_version()Julian Wiedmann1-6/+8
Instead of assuming that skb->data points to the Ethernet header, use the right helper and struct to access the Ethertype field. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: align L2 and L3 set_rx_mode() implementationsJulian Wiedmann2-67/+43
Once all of qeth_l3_set_rx_mode()'s single-use helpers are folded back in, the two implementations actually look quite similar. So improve the readability by converting both set_rx_mode() routines to a common format. This also allows us to walk ip_mc_htable just once, instead of three times. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: use ether_addr_* helpersJulian Wiedmann6-37/+32
Be a little more self-documenting, and get rid of OSA_ADDR_LEN. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: consolidate qeth MAC address helpersJulian Wiedmann1-29/+18
For adding/removing a MAC address, use just one helper each that handles both unicast and multicast. Saves one level of indirection for multicast addresses, while improving the error reporting for unicast addresses. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: don't keep track of MAC address's cast typeJulian Wiedmann2-20/+8
Instead of tracking the uc/mc state in each MAC address object, just check the multicast bit in the address itself. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: drop CONFIG_QETH_IPV6Julian Wiedmann2-54/+9
commit "s390/qeth: use ip*_eth_mc_map helpers" removed the last occurrence of CONFIG_IPV6-dependent code. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: use ip*_eth_mc_map helpersJulian Wiedmann1-29/+14
Get rid of some wrapper indirection, and stop accessing the skb at hard-coded offsets. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20qeth: convert qeth_reply.refcnt from atomic_t to refcount_tElena Reshetova2-6/+5
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable qeth_reply.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> [jwi: removed the WARN_ONs. Use CONFIG_REFCOUNT_FULL if you care.] Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: convert lcs_reply.refcnt from atomic_t to refcount_tElena Reshetova2-8/+5
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable lcs_reply.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> [jwi: removed the WARN_ONs. Use CONFIG_REFCOUNT_FULL if you care.] Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20netdevsim: correctly check return value of debugfs_create_dirPrashant Bhole2-6/+8
- Checking return value with IS_ERROR_OR_NULL - Added error handling where it was not handled Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: amd-xgbe: Get rid of custom hex_dump_to_buffer()Andy Shevchenko1-17/+7
Get rid of yet another custom hex_dump_to_buffer(). The output is slightly changed, i.e. each byte followed by white space. Note, we don't use print_hex_dump() here since the original code uses nedev_dbg(). Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20netdevsim: bpf: remove unused variableJakub Kicinski1-3/+0
skip_sw is set but no longer used. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20netdevsim: declare struct device_type as staticJakub Kicinski1-1/+1
struct device_type nsim_dev_type created for SR-IOV support should be static. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: pasemi: Replace mac address parsingAndy Shevchenko1-3/+1
Replace sscanf() with mac_pton(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: bonding: Replace mac address parsingAndy Shevchenko1-5/+1
Replace sscanf() with mac_pton(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: compile Geneve encap actionsJohn Hurley2-38/+48
Generate rules for the NFP to encapsulate packets in Geneve tunnels. Move the vxlan action code to generic udp tunnel actions and use core code for both vxlan and Geneve. Only support outputting to well known port 6081. Setting tunnel options is not supported yet. Only attempt to offload if the fw supports Geneve. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: compile Geneve match fieldsJohn Hurley4-42/+91
Compile Geneve match fields for offloading to the NFP. The addition of Geneve overflows the 8 bit key_layer field, so apply extended metadata to the match cmsg allowing up to 32 more key_layer fields. Rather than adding new Geneve blocks, move the vxlan code to generic ipv4 udp tunnel structs and use these for both vxlan and Geneve. Matches are only supported when specifically mentioning well known port 6081. Geneve tunnel options are not yet included in the match. Only offload Geneve if the fw supports it - include check for this. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: read extra feature support from fwJohn Hurley2-1/+11
Extract the _abi_flower_extra_features symbol from the fw which gives a 64 bit bitmap of new features (on top of the flower base support) that the fw can offload. Store this bitmap in the priv data associated with each app. If the symbol does not exist, set the bitmap to 0. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: remove unused tun_mask variableJohn Hurley1-5/+6
The tunnel dest IP is required for separate offload to the NFP. It is already verified that a dest IP must be present and must be an exact match in the flower rule. Therefore, we can just extract the IP from the generated offload rule and remove the unused mask variable. The function is then no longer required to return the IP separately. Because tun_dst is localised to tunnel matches, move the declaration to the tunnel if branch. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19cxgb4: RSS table is 4k for T6Ganesh Goudar6-23/+36
RSS table is 4k for T6 and later cards, add check for the same. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Include header descriptor support for ARP packetsThomas Falcon1-1/+6
In recent tests with new adapters, it was discovered that ARP packets were not being properly processed. This patch adds support for ARP packet headers to be passed to backing adapters, if necessary. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Increase maximum number of RX/TX queuesThomas Falcon1-1/+1
Increase the number of queues allocated to accommodate recent network adapter inclusions on the IBM vNIC platform. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Rename IBMVNIC_MAX_TX_QUEUES to IBMVNIC_MAX_QUEUESThomas Falcon2-2/+2
This value denotes the maximum number of TX queues but is used to allocate both RX and TX queues. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge tag 'wireless-drivers-next-for-davem-2017-12-18' of ↵David S. Miller157-2098/+12666
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next The drivers/net/wireless/intel/iwlwifi/pcie/drv.c conflict was resolved using a diff provided by Kalle in his pull request. Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 A bigger pull request this time, the most visible change being the new driver mt76. But there's also Kconfig refactoring in ath9k and ath10k, work beginning in iwlwifi to have rate scaling in firmware/hardware, wcn3990 support getting closer in ath10k and lots of smaller changes. mt76 * a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek ath10k * enable multiqueue support for all hw using mac80211 wake_tx_queue op * new Kconfig option ATH10K_SPECTRAL to save RAM * show tx stats on QCA9880 * new qcom,ath10k-calibration-variant DT entry * WMI layer support for wcn3990 ath9k * new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM wcn36xx * hardware scan offload support wil6210 * run-time PM support when interface is down iwlwifi * initial work for rate-scaling offload * Support for new FW API version 36 * Rename the temporary hw name A000 to 22000 ssb * make SSB a menuconfig to ease disabling it all mwl8k * enable non-DFS 5G channels 149-165 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19cxgb4: Report tid start range correctly for T6Ganesh Goudar1-3/+8
For T6, tid start range should be read from LE_DB_ACTIVE_TABLE_START_INDEX_A register. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge branch 'for-upstream' of ↵David S. Miller9-13/+136
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-12-18 Here's the first bluetooth-next pull request for the 4.16 kernel. - hci_ll: multiple cleanups & fixes - Remove Gustavo Padovan from the MAINTAINERS file - Support BLE Adversing while connected (if the controller can do it) - DT updates for TI chips - Various other smaller cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: ks8851: Support DT-provided MAC addressLukas Wunner1-2/+11
Allow the boot loader to specify the MAC address in the device tree to override the EEPROM, or in case no EEPROM is present. Cc: Ben Dooks <ben@simtec.co.uk> Cc: Tristram Ha <tristram.ha@micrel.com> Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: use platform device id directly for miibus nameJonas Gorski2-5/+1
Directly use the platform device for generating the miibus name. This removes the last user of bcm_enet_priv::mac_id and we can remove the field. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: remove pointless mac_id checkJonas Gorski1-1/+1
Enabling the ephy clock for mac 1 is harmless, and the actual usage of the ephy is not restricted to mac 0, so we might as well remove the check. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: use platform data for dma channel numbersJonas Gorski1-9/+2
To reduce the reliance on device ids, pass the dma channel numbers to the enet devices as platform data. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: just use "enet" as the clock nameJonas Gorski1-4/+1
Now that we have the individual clocks available as "enet" we don't need to rely on the device id for them anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19geneve: speedup geneve tunnels dismantleHaishuang Yan1-8/+16
Since we now hold RTNL lock in geneve_exit_net, it's better batch them to speedup geneve tunnel dismantle. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19vxlan: speedup vxlan tunnels dismantleHaishuang Yan1-9/+17
Since we now hold RTNL lock in vxlan_exit_net, it's better to batch them to speedup vxlan tunnels dismantle. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19forcedeth: remove duplicate structure member in xmitZhu Yanjun1-12/+13
Since both first_tx_ctx and tx_skb are the head of tx ctx, it not necessary to use two structure members to statically indicate the head of tx ctx. So first_tx_ctx is removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19qede: Use NETIF_F_GRO_HW.Michael Chan4-18/+25
Advertise NETIF_F_GRO_HW and set edev->gro_disable according to the feature flag. Add qede_fix_features() to drop NETIF_F_GRO_HW if XDP is running or MTU does not support GRO_HW or GRO is not set. qede_change_mtu() also checks and disables GRO_HW if MTU is not supported. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bnx2x: Use NETIF_F_GRO_HW.Michael Chan2-15/+17
Advertise NETIF_F_GRO_HW and turn on TPA_MODE_GRO when NETIF_F_GRO_HW is set. Disable NETIF_F_GRO_HW in bnx2x_fix_features() if the MTU does not support TPA_MODE_GRO or GRO is not set. bnx2x_change_mtu() also needs to disable NETIF_F_GRO_HW if the MTU does not support it. Original parameter disable_tpa will continue to disable LRO and GRO_HW. Preserve the original behavior of enabling LRO by default. User has to run ethtool -K to explicitly enable GRO_HW. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bnxt_en: Use NETIF_F_GRO_HW.Michael Chan1-7/+20
Advertise NETIF_F_GRO_HW in hw_features if hardware GRO is supported. In bnxt_fix_features(), disable GRO_HW and LRO if current hardware configuration does not allow it. GRO_HW depends on GRO. GRO_HW is also mutually exclusive with LRO. XDP setup will now rely on bnxt_fix_features() to turn off aggregation. During chip init, turn on or off hardware GRO based on NETIF_F_GRO_HW in features flag. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18cxgb4: Simplify PCIe Completion Timeout settingBjorn Helgaas1-18/+3
Simplify PCIe Completion Timeout setting by using the pcie_capability_clear_and_set_word() interface. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18phylink: fix locking assertsRussell King1-17/+17
Use ASSERT_RTNL() rather than WARN_ON(!lockdep_rtnl_is_held()) which stops working when lockdep fires, and we end up with lots of warnings. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfp: fix EEPROM reading in the case of non-SFF8472 SFPsRussell King1-4/+3
The EEPROM reading was trying to read from the second EEPROM address if we requested the last byte from the SFF8079 EEPROM, which caused a failure when the second EEPROM is not present. Discovered with a S-RJ01 SFP module. Fix this. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfp: fix non-detection of PHYRussell King1-4/+4
The detection of a PHY changed in commit e98a3aabf85f ("mdio_bus: don't return NULL from mdiobus_scan()") which now causes sfp to print an error message. Update for this change. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: join the authorsJerome Brunet1-0/+1
Following previous changes, join the other authors of this driver and take the blame with them Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: add interrupt supportJerome Brunet1-1/+36
Enable interrupt support in meson-gxl PHY driver Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: leave CONFIG_A6 untouchedJerome Brunet1-9/+0
The PHY performs just as well when left in its default configuration and it makes senses because this poke gets reset just after init. According to the documentation, all registers in the Analog/DSP bank are reset when there is a mode switch from 10BT to 100BT. The bank is also reset on power down and soft reset, so we will never see the value which may have been set by the bootloader. In the end, we have used the default configuration so far and there is no reason to change now. Remove CONFIG_A6 poke to make this clear. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 15:59:57 +0300