Age | Commit message (Collapse) | Author | Files | Lines |
|
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data). This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.
Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when thermal framework sets
capping.
Fixes: f12e4f66ab6a3 ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210614191030.22241-1-lukasz.luba@arm.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix uninitialized error code value for the SPMI adc driver (Yang
Yingliang)
- Fix kernel doc warning (Yang Li)
- Fix wrong read-write thermal trip point initialization (Srinivas
Pandruvada)
* tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
thermal/ti-soc-thermal: Fix kernel-doc
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- two interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: request autosuspend after sending rx flow control
kgdb: fix gcc-11 warnings harder
video: hgafb: correctly handle card detect failure during probe
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
- MD pull request (Song):
- Fix incorrect chunk boundary assert (Christoph)
- Fix s390/dasd verification panic (Stefan)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise.
ttm:
- prevent irrelevant swapout
amdgpu:
- MultiGPU fan fix
- VCN powergating fixes
amdkfd:
- Fix SDMA register offset error
meson:
- fix shutdown crash
i915:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4"
* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: Skip swapout if ttm object is not populated
drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
drm/meson: fix shutdown crash when component not probed
drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
drm/amd/pm: correct MGpuFanBoost setting
|
|
This reverts commit 31fae7c8b18c3f8029a2a5dce97a3182c1a167a0.
Tony writes:
I just noticed this causes the following regression in Linux
next when pressing a key on uart console after boot at least on
omap3. This seems to happen on serial_port_in(port, UART_RX) in
the quirk handling.
So let's drop this.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YLCCJzkkB4N7LTQS@atomide.com
Fixes: 31fae7c8b18c ("serial: 8250: 8250_omap: Fix possible interrupt storm")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.
Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc4:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV<1.4
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875yz4bnmj.fsf@intel.com
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A fix in meson for a crash at shutdown and one for TTM to prevent
irrelevant swapout
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527120828.3w7f53krzkslc4ii@gilmour
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-05-26:
amdgpu:
- MultiGPU fan fix
- VCN powergating fixes
amdkfd:
- Fix SDMA register offset error
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527031831.4057-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's 'require_signatures' module_param permissions.
- Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
when an origin has no snapshots. This allows only the proper fix to
go to stable@ (since the original fix was successfully dropped).
* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: properly fix a crash when an origin has no snapshots
dm snapshot: revert "fix a crash when an origin has no snapshots"
dm verity: fix require_signatures module_param permissions
|
|
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions")
Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-stm32f4.c:321: warning: expecting prototype for stm32f4_i2c_write_ byte()(). Prototype was for stm32f4_i2c_write_byte() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead
drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead
Fix the "enmpty" typo while here.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv'
drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
documentation headers
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
'msgs' param
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller
drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-designware-master.c:176: warning: expecting prototype for i2c_dw_init(). Prototype was for i2c_dw_init_master() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-cadence.c:157: warning: expecting prototype for enum cdns_i2c_slave_mode. Prototype was for enum cdns_i2c_slave_state instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ali1563.c:24: warning: expecting prototype for i2c(). Prototype was for ALI1563_MAX_TIMEOUT() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-nomadik.c:184: warning: Function parameter or member 'timeout' not described in 'nmk_i2c_dev'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
occur on some systems due to attempts to turn off ACPI power resources
that are already off (which should work according to the ACPI
specification)"
* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: power: Refine turning off unused power resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Important fix for the AMD IOMMU driver in the recently added
page-specific invalidation code to fix a calculation.
- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
switches domain types.
- Fixes for the Intel VT-d driver to check for allocation failure and
do correct cleanup.
- Another fix for Intel VT-d to not allow supervisor page requests from
devices when using second level page translation.
- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver
* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu/vt-d: Use user privilege for RID2PASID translation
iommu/vt-d: Check for allocation failure in aux_detach_device()
iommu/virtio: Add missing MODULE_DEVICE_TABLE
iommu/amd: Fix wrong parentheses on page-specific invalidations
iommu/amd: Clear DMA ops when switching domain
|
|
iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent
errors.
Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device")
Cc: stable@vger.kernel.org # 4.11.x
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/17411490.HIIP88n32C@mobilepool36.emlix.com
Link: https://lore.kernel.org/r/20210525070802.361755-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.13
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)"
* tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
|
|
In commit 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
the way the irq gets allocated was changed. With that change the
handling FL_NOIRQ got lost. Restore the old behaviour.
Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://lore.kernel.org/r/20210527095529.26281-1-christian.gmeiner@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Grorgi writes:
interconnect fixes for v5.13
This contains two tiny driver fixes:
- bcm-voter: Add missing MODULE_DEVICE_TABLE
- bcm-voter: Add a missing of_node_put()
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
|
|
Return -EINVAL when args is invalid instead of 'ret' which is set to
zero by a previous successful call to a function.
Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210527092640.2070555-1-yangyingliang@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD parsers:
- Fix ofpart subpartitions parsing
Raw NAND:
- Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"
* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: parsers: ofpart: fix parsing subpartitions
mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.13
Pull MD fix from Song.
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5: remove an incorrect assert in in_chunk_boundary
|
|
Controller teardown flow may take some time in case it has many I/O
queues, and the host may not send us keep-alive during this period.
Hence reset the traffic based keep-alive timer so we don't trigger
a controller teardown as a result of a keep-alive expiration.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Using "<=" instead "<" to compare inline data size.
Fixes: bdaf13279192 ("nvmet-tcp: fix a segmentation fault during io parsing error")
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to select NVME_CORE.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Swapping a ttm object which has no backend pages makes no sense.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521083112.33176-1-xinhui.pan@amd.com
CC: stable@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Now that the original bdev is stored in the bio this assert is incorrect
and will trigger for any partitioned raid5 device.
Reported-by: Florian Dazinger <spam02@dazinger.net>
Tested-by: Florian Dazinger <spam02@dazinger.net>
Cc: stable@vger.kernel.org # 5.12
Fixes: 309dca309fc3 ("block: store a block_device pointer in struct bio"),
Reviewed-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
|
|
If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.
Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate the follow smatch warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|