summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-06-24drm/amdgpu: disable gfxoff on navi10tiancyin1-3/+1
The gfxoff brings unstability, disable it by default Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: tiancyin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-24drm/amdgpu: fix modprobe failure for uvd_4/5/6Hawking Zhang2-1/+13
For uvd_4/5/6, amdgpu driver will only power on them when there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken since amdgpu_dpm_set_powergating_by_smu only covers gfx block. The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new power gate helper function smu_dpm_set_power_gate, otherwise, fallback to legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks always invoke legacy powerplay helper function. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amdgpu: drop unused df init callbackAlex Deucher1-1/+0
It was replaced with the sw_init callback so is no longer needed. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amdgpu: add sw_init to df_v1_7Jonathan Kim1-2/+2
change df_init to df_sw_init df 1.7 to prevent regression issues on pre-vega20 products when callback is called in sw_common_sw_init. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amdkfd: Set gws_mask to 64 bit 1sOak Zeng1-2/+2
Previous kfd doesn't use gws so this mask was set to 0. Set it to 64 bit 1s because now kfd can use all 64 gws resources. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display/dc: set num-dwb = 1 as navi10 asic caphersen wu1-1/+1
during navi10 bring up, dwb causes system hang. to continue debug major issue, disable dwb by set num-dwb = 0. the hang issue is not reproduced now by enable num-dwb =1. dc source is shared by all os. win needs num-dwb = 1. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: make clk_mgr call enable_pme_waSu Sung Chung3-24/+35
[why] Before for raven and navi we are calling pp_smu functions for pme [how] refactor a code so we will call clk_mgr's enable_pme_wa function so we can use pme_wa for future asics. This way we don't need to worry about different ASIC since clk_mgr already have that information Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: expose dentist_get_did_from_dividerCharlene Liu2-1/+3
for future use Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add missing mod_vmid destructorDmytro Laktyushkin2-0/+11
mod_vmid is missing a destructor. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add Underflow Asserts to dcThomas Lim7-2/+41
[Why] For debugging underflow issues it can be useful to have asserts when the underflow initially occurs. [How] Read the underflow status registers after actions that have a high risk of causing underflow and assert that no underflow occurred. If underflow occurred, clear the bit. Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: move vmid determination logic to a moduleDmytro Laktyushkin23-231/+357
Currently vmid is decided internally inside dc. With the introduction of new asics we are required to coordinate vmid use with external components. This change converts vmid logic to a DAL module allowing vmid to be passed in as a parameter to DC. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: dcn2 use fixed clocks.Charlene Liu3-12/+21
[Description] dcn2 use fixed clocks and not program DPP CLK or Disp_CLK. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add p010 and ayuv plane capsCharlene Liu1-0/+2
for future use Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: update DCN2 uclk switch timeJun Lei2-5/+9
[why] value commited to by HW team is going to be higher than pre-silicon, and will cause underflow if driver not updated [how] update hardcoded value, update pstate switching logic to fix case where with long uclk time we won't allow switch even when we should Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Rework CRTC color managementNicholas Kazlauskas3-159/+356
[Why] To prepare for the upcoming DRM plane color management properties we need to correct a lot of wrong behavior and assumptions made for CRTC color management. The documentation added by this commit in amdgpu_dm_color explains how the HW color pipeline works and its limitations with the DRM interface. The current implementation does the following wrong: - Implicit sRGB DGM when no CRTC DGM is set - Implicit sRGB RGM when no CRTC RGM is set - No way to specify a non-linear DGM matrix that produces correct output - No way to specify a correct RGM when a linear DGM is used We had workarounds for passing kms_color tests but not all of the behavior we had wrong was covered by these tests (especially when it comes to non-linear DGM). Testing both DGM and RGM at the same time isn't something kms_color tests well either. [How] The specifics for how color management works in AMDGPU and the new behavior can be found by reading the documentation added to amdgpu_dm_color.c from this patch. All of the incorrect cases from the old implementation have been addressed for the atomic interface, but there still a few TODOs for the legacy one. Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI. The result looks correct from visual inspection but the CRC no longer matches. For reference, the test was previously doing the following: linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ... Now the test is doing: linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ... Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Use macro for invalid OPP IDWesley Chalmers5-7/+9
[WHY] This is meant to make it clearer that 0xf is not a valid OPP ID, and that code making use of OPP IDs should not accept this value. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: expose enable dp output functionsEric Bernstein2-1/+6
expose this function for future use Implementation of DCN3 DIO Link Encoder including dpcs register headers. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add dwb stere caps and versionCharlene Liu2-1/+4
add dwb stereo caps and ver for future use Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Alpha plane typeEric Bernstein1-0/+1
Add Alpha surface type for future use Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: making DCN20 WM table non-overlappingJun Lei1-9/+8
[why] Existing behavior has overlapping ranges resulting in path dependent SMU selection [how] Make ranges non-overlapping, resulting in non-path dependent selection Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: update dsc max_target_bpp to 16 bppWenjing Liu1-8/+1
[why] According to the latest specs, the max_target bpp sink can support is 16 bpp. [how] update dsc max_target_bpp to 16 Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add some parameters to validate bandwidth functionsCharlene Liu6-12/+23
required for new checks. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: update DSC MST DP virtual DPCD peer device enumeration policyWenjing Liu7-261/+161
[why] Current policy assumes virtual DPCD peer device as an individual MST branch device with 1 input and 1 output. However this is only true for virtual DP-to-DP peer device. In general there are three types of virtual DP peer devices. 1. Sink peer device with virtual DPCD. 2. Virtual DP-to-DP Peer device with virtual DPCD. 3. Virtual DP-to-HDMI Protocol Converter Peer Device with Virtual DPCD. So we should break the assumption and handle all three types. [how] DP-to-DP peer device will have virtual DPCD cap upstream. Sink peer device will have virtual DPCD on the logical port. Dp to HDMI protocol converter peer device will have virtual DPCD on its converter port. For DSC capable Synaptics non VGA port we workaround by enumerating a virutal DPCD peer device on its upstream even if it doesn't have one. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add support for forcing DCFCLK without affecting watermarksJun Lei2-0/+12
[why] useful for debugging [how] plumb a debug option in dc Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Copy stream updates onto streamsNicholas Kazlauskas1-0/+97
[Why] Almost every function in DC that works with stream state expects that the current state on the stream is the one that it should be writing out. These functions are typically triggered by specifying a particular stream update - but the actual contents of the stream update itself are ignored, leaving it to the DM to actually update the stream state itself. The problem with doing this in DM is a matter of timing. On Linux most of this is incorrectly done in atomic check, when we actually want it to be done during atomic commit tail while access to DC is locked. To give an example, a commit requesting to modify color management state for DM could come in, be rejected, but still have modified the actual system state for the stream since it's shared memory. The next time color management gets programmed it'll use the rejected color management info - which might not even still be around if it's a custom transfer function. So a reasonable place to perform this is within DC itself and this is the model that's currently in use for surface updates. DC can even compare the current system state to the incoming surface update to determine update level, something that can't currnetly be done with the framework for stream updates. [How] Duplicate the framework used for surface updates for stream updates as well. Copy all the updates after checking the update type. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Fix incorrect vba typeIlya Bakoulin1-1/+1
SwathWidthCThisState is expected to be an unsigned int array. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: removing MODULO change for dcn2Martin Leung1-28/+0
[why] when resetting pipes from 480p to dual-pipe 8k, modulo reg write for video optimized rate updated one pipe without changing the other, causing sync error [how] removed code from dcn2 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Fix incorrect DML output_bpp valueIlya Bakoulin2-3/+45
[Why] The output_bpp pipe parameter was assigned an incorrect value (color depth enum), and subsequently used to overwrite the OutputBpp parameter calculated by DML. Seems like this had no effect except with DSC enabled, which would make DML produce bad outputs. [How] Removed assignment to OutputBpp, fixed output_bpp assignment, and properly set ForcedOutputLinkBPP instead of OutputBpp. Also removed condition in DML that prevented forcing of Output BPP with DSC enabled. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add missing VM conversion from hw valuesJun Lei2-17/+65
[why] VM implemenation is missing conversion from HW values in hubbub DM not passing actual PTB during flip [how] add proper HW conversion from logical values fix cases where we programmed VA even though we are in PA plumb in PTB from DM Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Drive-by fixes for display_mode_vbaIlya Bakoulin2-5/+2
Fixes for the following: - Incorrect pointer type (unsigned int instead of double) - Incorrect DSC number of slices setting Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Enable DSC power-gating for DSC streamsNikola Cornij2-3/+8
[why] Currently DSC power gating is disabled by default because the power transition doesn't happen, causing a crash on some systems [how] Fix the lack of power state transition and enable DSC power gating by default. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Return UPDATE_TYPE_FULL on writeback updateCharlene Liu3-1/+9
Should do full update when display writeback is updated. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: decouple dsc adjustment out of enablementWenjing Liu7-44/+24
[why] dsc adjustment is allowed via stream update sequence. dsc enablement is only allowed via commit stream sequence. with the current unified dsc set function, it is hard to determine which sequence it is called by. The solution is to decouple dsc adjustment out of enablement sequence so we can handle them separately. [how] decouple dsc adjustment out of enablement. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: always use 4 dp lanes for dmlJun Lei1-11/+1
[why] current DML logic uses currently trained setting for number of dp lanes in DML calculations. this is obviously flawed since just because 1 lane is in use doesn't mean only 1 lane can be used this causes mode validation to fail depending on current state, which is incorrect [how] DML should always assume 4 lanes are available. validation of bandwidth is not supposed to be handled by DML, since we do link validation without DML already also, DML is expecting there to be a copy of the max state, this state is removed when update_bounding_box is called to update actual SKU clocks. fix this as well by duping last state. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eric Yang <eric.yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Use DCN2 functions instead of DCEWesley Chalmers1-1/+2
[WHY] DCN code should make as few references to DCE as possible [HOW] Copy DCE110 implementation of find_first_free_match_stream_enc_for_link into DCN10 Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: DCN2 Engine-specifc encoder allocationWesley Chalmers1-1/+2
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Disable DSC power gating in DiagsNikola Cornij1-0/+3
[why] With DSC power gating enabled, one of the register reads times out occasionally, causing a DSC test to fail. [how] Disable DSC power gating in Diags. NOTE: This has to be reverted once the problems with DSC power gating are resolved. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Set test pattern on blank when using Visual ConfirmJoshua Aberback1-42/+11
[Why] We want a test pattern to show up on screen when we're blanked and have visual confirm enabled, for debugging. Raven does this, it's a mistake that Navi does not. [How] - in "blank_pixel_data", set appropriate DPG pattern for visual confirm - refactor DPG calls out of "enable_stream_timing" Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add null checks and set update flags for DCN2Dmytro Laktyushkin4-9/+17
* add plane state null checks * add and set update surface flags Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: move DWB structs and enums to dc_hw_typesTyler DiBattista3-17/+17
[Why] these enums/structs will be used more generically in the future so moving it to dc_hw_types and dc_types Signed-off-by: Tyler DiBattista <tyler.dibattista@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Integrate color transform3x4 with 3dlut tmVitaly Prosyak4-3/+22
[Why & How] Reuse existent code path (dcn1+) and in order to do that apply de gamma in 1D blender LUT and re use MPC OGAM. Follow up is required. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: used optimum VSTARTUP instead of MaxVStartupCharlene Liu3-2/+12
[Description] Features that are desirable for minimizing the Global Sync Period: DRR and lateflip Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add dsc_passthrough_support bit in dpcd structWenjing Liu1-3/+3
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: fix a potential issue in DSC logicWenjing Liu1-4/+10
[why] In compute dsc bandwidth range there is an uninitialized variable [how] Initialize the variable to the correct value. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Expose send immediate sdp message interfaceLeo (Hanghong) Ma1-1/+0
[Why] To send sdp message immediately from a single slot. [How] Modify the generic SDP message interface, and use GSP4 to send immediate sdp message. Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Fix LB BPP and Cursor widthIlya Bakoulin4-9/+29
DCN2.0 LB BPP should be 48 or 16BPC and max cursor width should be 256. Also use populate_dml_pipes as functions pointer instead of using it directly Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: fix macro_tile_size for tilingDmytro Laktyushkin1-2/+2
A regression was introduced when we set correct tile size for the gfx9 swizzle mode. This resulted in incorrect macro tile size. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Remove OPP clock programming on plane disableJoshua Aberback1-6/+0
[Why] Plane disable gets calls when we enable blank. On DCN2, we blank by using DPG to display a black colour instead of using OTG blank. DPG runs off the OPP clock, therefore we shouldn't disable the OPP clock when disabling the plane. We do need to disable the OPP clock when disabling the entire pipe, that will be addressed in a separate commit. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: fix odm mpo disableDmytro Laktyushkin1-5/+6
It looks like mpo isn't properly disabled during odm, this change is meant to fix that. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: [backport] dwb dm + efc supportCharlene Liu4-4/+33
dwb fixes. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 21:41:36 +0300