summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-06-24drm: Fix shifts which were miscalculated when converting from bitfields.Michel Dänzer1-6/+6
Looks like I managed to mess up most shifts when converting from bitfields. :( The patch below works on my Thinkpad T500 (as well as on my PowerBook, where the previous change worked as well, maybe out of luck...). I'd appreciate more testing and eyes looking over it though. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Tested-by: Michael Pyne <mpyne@kde.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24drm/radeon: Clear surface registers at initialization time.Michel Dänzer1-0/+20
Some PowerMac firmwares set up a tiling surface at the beginning of VRAM which messes us up otherwise. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24drm/radeon: Don't initialize acceleration related fields of struct fb_info.Michel Dänzer1-3/+3
Might lure userspace into trying silly things otherwise. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24drm/radeon: fix radeon kms framebuffer deviceJerome Glisse3-42/+19
smem.start is a physical address which kernel can remap to access video memory of the fb buffer. We now pin the fb buffer into vram by doing so we are loosing vram but fbdev need to be reworked to allow change in framebuffer address. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24asus-laptop: remove EXPERIMENTAL dependencyCorentin Chary1-1/+1
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24asus-laptop: use pr_fmt and pr_<level>Corentin Chary1-24/+26
Convert the unusual printk(ASUS_<level> uses to the more standard pr_fmt and pr_<level>(. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24eeepc-laptop: cpufv updatesCorentin Chary1-1/+76
Limit cpufv input to acceptables values. Add an available_cpufv file to show available presets. Change cpufv ouput format from %d to %#x, it won't break compatibility with existing userspace tools, but it provide a more human readable output. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24eeepc-laptop: sync eeepc-laptop with asus_acpiCorentin Chary1-4/+15
In the default Eee PC distribution, there is a modified asus_acpi driver. eeepc-laptop is a cleaned version of this driver. Sync ASL enum and getter/setters with asus_acpi. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24asus_acpi: Deprecate in favor of asus-laptopCorentin Chary1-2/+2
asus-laptop have been merged in the kernel two years ago, it is now stable and used by most distribution instead of the old asus_acpi driver. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24acpi4asus: update MAINTAINER and KConfig linksCorentin Chary1-4/+7
The bug tracker have moved from sourceforge to http://dev.iksaif.net . The homepage of the project is now http://acpi4asus.sf.net with links to the new bug tracker. No change for the mailing list. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24asus-laptop: platform dev as parent for led and backlightCorentin Chary1-21/+19
Makes asus-laptop platform device the parent device of backlight and led classes. With this patch, leds and backlight are also available in /sys/devices/platform/asus-laptop/ like thinkpad_acpi. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24eeepc-laptop: enable camera by defaultPekka Enberg1-0/+12
If we leave the camera disabled by default, userspace programs (e.g. Skype, Cheese) leave the user out in the cold saying that the machine "has no camera." Therefore, it's better to enable camera by default and let people who really don't want it just disable the thing. To reduce power usage you should enable USB autosuspend: echo -n auto > /sys/bus/usb/drivers/uvcvideo/*:*/../power/level Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branch 'bjorn-notify' into releaseLen Brown6-153/+63
Conflicts: drivers/platform/x86/eeepc-laptop.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown22-721/+1535
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-24ACPI: Rename ACPI processor device bus IDZhao Yakui1-1/+10
Some BIOS re-use the same processor bus id in different scope: \_SB.SCK0.CPU0 \_SB.SCK1.CPU0 But the (deprecated) /proc/acpi/ interface assumes the bus-id's are unique, resulting in an OOPS when the processor driver is loaded: WARNING: at fs/proc/generic.c:590 proc_register+0x148/0x180() Hardware name: Sunrise Ridge proc_dir_entry 'processor/CPU0' already registered Call Trace: [<ffffffff8023f7ef>] warn_slowpath+0xb1/0xe5 [<ffffffff8036243b>] ? ida_get_new_above+0x190/0x1b1 [<ffffffff803625a8>] ? idr_pre_get+0x5f/0x75 [<ffffffff8030b2f6>] proc_register+0x148/0x180 [<ffffffff8030b4ff>] proc_mkdir_mode+0x3d/0x52 [<ffffffff8030b525>] proc_mkdir+0x11/0x13 [<ffffffffa0014b89>] acpi_processor_start+0x755/0x9bc [processor] Rename the processor device bus id. And the new bus id will be generated as the following format: CPU+ CPU ID For example: If the cpu ID is 5, then the bus ID will be "CPU5". If the CPU ID is 10, then the bus ID will be "CPUA". Yes, this will change the directory names seen in /proc/acpi/processor/* on some systems. Before this patch, those directory names where totally arbitrary strings based on the interal AML device strings. http://bugzilla.kernel.org/show_bug.cgi?id=13612 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24acerhdf: Acer Aspire One fan controlPeter Feuerer3-0/+620
Acerhdf is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightnessZhang Rui1-0/+8
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: run ACPI device hot removal in kacpi_hotplug_wqZhang Rui1-12/+8
Now that new interface is available, convert to using it rather than creating a new kernel thread. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: Add the reference count to avoid unloading ACPI video bus twiceZhao Yakui2-7/+36
Sometimes both acpi video and i915 driver are compiled as modules. And there exists the strict dependency between the two drivers. The acpi video bus will be unloaded in course of unloading the i915 driver. If we unload the acpi video driver, then the kernel oops will be triggered. Add the reference count to avoid unloading the ACPI video bus twice. The reference count should be checked before unregistering the acpi video bus. If the reference count is already zero, it won't unregister it again. And after the acpi video bus is already unregistered, the reference count will be set to zero. http://bugzilla.kernel.org/show_bug.cgi?id=13396 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: DMI to disable Vista compatibility on some Sony laptopsZhang Rui1-0/+16
Linux claims Vista compatibility to the BIOS for a number of reasons, but this brings hard lockup on some Sony laptops. Disable Vista compatibility via DMI for these laptops unless we can figure out what Vista is doing for this platform. http://bugzilla.kernel.org/show_bug.cgi?id=12904 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: fix a deadlock in hotplug caseZhang Rui1-9/+16
we used to run the hotplug code in keventd_wq. But when hot removing the ACPI battery device, power_supply_unregister invokes flush_scheduled_work. This causes a deadlock. i.e 1. When dock is unplugged, all the hotplug code is run on kevent_wq. 2. the hotplug code removes all the child devices of dock device. 3. removing the child device may invoke flush_scheduled_work 4. flush_scheduled_work waits until all the work on kevent_wq to be finished, while this will never be true because the hotplug code is running on keventd_wq... Introduce a new workqueue for hotplug in this patch. http://bugzilla.kernel.org/show_bug.cgi?id=13533 Tested-by: Paul Martin <pm@debian.org> Tested-by: Vojtech Gondzala <vojtech.gondzala@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Show the physical device node of backlight class device.Zhang Rui1-0/+6
Create symbol link from backlight class device to ACPI video device. More and more laptops are shipped with multiple ACPI video devices, while we export only one of them to userspace. With this patch applied, we can know which ACPI video device is used by "cat /sys/class/backlight/acpi_video0/device/path". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge git://git.infradead.org/iommu-2.6Linus Torvalds3-77/+399
* git://git.infradead.org/iommu-2.6: Intel-IOMMU, intr-remap: source-id checking Intel-IOMMU, intr-remap: set the whole 128bits of irte when modify/free it IOMMU Identity Mapping Support (drivers/pci/intel_iommu.c)
2009-06-24Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds3-0/+634
* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: driver for the Synopsys DesignWare I2C controller
2009-06-24qla3xxx: Don't sleep while holding lock.Ron Mercer1-0/+3
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24qla3xxx: Give the PHY time to come out of reset.Ron Mercer1-1/+2
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24i2c: driver for the Synopsys DesignWare I2C controllerBaruch Siach3-0/+634
The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9 based PVG610. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-24Intel-IOMMU, intr-remap: source-id checkingWeidong Han2-3/+119
To support domain-isolation usages, the platform hardware must be capable of uniquely identifying the requestor (source-id) for each interrupt message. Without source-id checking for interrupt remapping , a rouge guest/VM with assigned devices can launch interrupt attacks to bring down anothe guest/VM or the VMM itself. This patch adds source-id checking for interrupt remapping, and then really isolates interrupts for guests/VMs with assigned devices. Because PCI subsystem is not initialized yet when set up IOAPIC entries, use read_pci_config_byte to access PCI config space directly. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-24Intel-IOMMU, intr-remap: set the whole 128bits of irte when modify/free itWeidong Han1-14/+26
Interrupt remapping table entry is 128bits. Currently, it only sets low 64bits of irte in modify_irte and free_irte. This ignores high 64bits setting of irte, that means source-id setting will be ignored. This patch sets the whole 128bits of irte when modify/free it. Following source-id checking patch depends on this. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-24IOMMU Identity Mapping Support (drivers/pci/intel_iommu.c)Fenghua Yu1-60/+254
Identity mapping for IOMMU defines a single domain to 1:1 map all PCI devices to all usable memory. This reduces map/unmap overhead in DMA API's and improve IOMMU performance. On 10Gb network cards, Netperf shows no performance degradation compared to non-IOMMU performance. This method may lose some of DMA remapping benefits like isolation. The patch sets up identity mapping for all PCI devices to all usable memory. In the DMA API, there is no overhead to maintain page tables, invalidate iotlb, flush cache etc. 32 bit DMA devices don't use identity mapping domain, in order to access memory beyond 4GiB. When kernel option iommu=pt, pass through is first tried. If pass through succeeds, IOMMU goes to pass through. If pass through is not supported in hw or fail for whatever reason, IOMMU goes to identity mapping. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-23nvidiafb: fix boot-time printk stringMikael Pettersson1-2/+1
On bootup nvidiafb prints the following on my Apple G5: nvidiafb: CRTC 1appears to have a CRT attached There should be a space between the '1' and the 'appears'. Add it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23Merge branch 'for-linus' of ↵Linus Torvalds10-34/+554
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Add __init/__exit macros to addr.c and cma.c IB/ehca: Bump version number mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() calls IB/mthca: Replace dma_sync_single() use with proper functions RDMA/nes: Fix FIN state handling under error conditions RDMA/nes: Fix max_qp_init_rd_atom returned from query device IB/ehca: Ensure that guid_entry index is not negative IB/ehca: Tolerate dynamic memory operations before driver load
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds41-588/+1174
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (38 commits) fusion: mptsas, fix lock imbalance [SCSI] scsi_transport_fc: replace BUS_ID_SIZE by fixed count sd, sr: fix Driver 'sd' needs updating message scsi_transport_iscsi: return -EOVERFLOW for Too many iscsi targets fc_transport: Selective return value from BSG timeout function fc_transport: The softirq_done function registration for BSG request sym53c8xx: ratelimit parity errors explain the hidden scsi_wait_scan Kconfig variable ibmvfc: Fix endless PRLI loop in discovery ibmvfc: Process async events before command responses libfc: Add runtime debugging with debug_logging module parameter libfcoe: Add runtime debugging with module param debug_logging fcoe: Add runtime debug logging with module parameter debug_logging scsi_debug: Add support for physical block exponent and alignment cnic: add NETDEV_1000 and NETDEVICES to Kconfig select cnic: Fix __symbol_get() build error. Revert "[SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’" ipr: differentiate pci-x and pci-e based adapters ipr: add test for MSI interrupt support scsi_transport_spi: Blacklist Ultrium-3 tape for IU transfers ...
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds11-79/+1825
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCI [WATCHDOG] hpwdt: Add NMI priority option [WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reload [WATCHDOG] add bcm47xx watchdog driver [WATCHDOG] Freescale STMP: watchdog driver [WATCHDOG] twl4030 watchdog driver [WATCHDOG] U300 COH 901 327 watchdog driver [WATCHDOG] Add pnx833x_wdt
2009-06-23Merge branch 'for_linus' of ↵Linus Torvalds51-483/+2253
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (62 commits) V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization table was being V4L/DVB (12130): Fix a redundant compiler warning V4L/DVB (12003): v4l2: Move bounding code outside I2C ifdef block V4L/DVB (11913): cx231xx: TRY_FMT should not actually set anything V4L/DVB (11912): em28xx: Use v4l bounding/alignment function V4L/DVB (11911): cx231xx: Use v4l bounding/alignment function V4L/DVB (11910): mt9: Use v4l bounding/alignment function V4L/DVB (11909): cx23885: Use v4l bounding/alignment function V4L/DVB (11908): w8968cf: Use v4l bounding/alignment function V4L/DVB (11907): cx88: Use v4l bounding/alignment function V4L/DVB (11906): saa7134: Use v4l bounding/alignment function V4L/DVB (11905): vivi: Use v4l bounding/alignment function V4L/DVB (11904): zoran: Use v4l bounding/alignment functiob V4L/DVB (11903): sh_mobile_ceu_camera: Use v4l bounding/alignment function V4L/DVB (11902): pxa-camera: Use v4l bounding/alignment function V4L/DVB (11901): v4l2: Create helper function for bounding and aligning images V4L/DVB (12128): v4l2: update framework documentation. V4L/DVB (12125): v4l2: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board calls V4L/DVB (12122): pvrusb2: De-obfuscate code which handles routing schemes V4L/DVB (12121): pvrusb2: Improve handling of routing schemes ...
2009-06-23Merge branch 'upstream-linus' of ↵Linus Torvalds5-10/+420
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't set IORDY for reset sata_fsl: Add power mgmt support [libata] PATA driver for CF interface on AT91SAM9260 SoC [libata] beautify module parameters
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds1-2/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide cmd64x: Remove serialize setting. ide: Take over as maintainer.
2009-06-23Merge branches 'ehca', 'misc', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier6-15/+30
2009-06-23RDMA: Add __init/__exit macros to addr.c and cma.cPeter Huewe2-4/+4
Add __init and __exit annotations to the module_init/module_exit functions from drivers/infiniband/core/addr.c and cma.c. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-23IB/ehca: Bump version numberAlexander Schmidt1-1/+1
Increment version number for DMEM toleration. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-23drm/i915: initialize fence registers to zero when loading GEMGrégoire Henry1-0/+13
Unitialized fence register could leads to corrupted display. Problem encountered on MacBooks (revision 1 and 2), directly booting from EFI or through BIOS emulation. (bug #21710 at freedestop.org) Signed-off-by: Grégoire Henry <henry@pps.jussieu.fr> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-23net: let KS8842 driver depend on HAS_IOMEMHeiko Carstens1-0/+1
Fixes this compile error on s390: CC drivers/net/ks8842.o drivers/net/ks8842.c: In function 'ks8842_select_bank': drivers/net/ks8842.c:124: error: implicit declaration of function 'iowrite16' drivers/net/ks8842.c: In function 'ks8842_write8': drivers/net/ks8842.c:131: error: implicit declaration of function 'iowrite8' Cc: Richard Rojfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23can: let SJA1000 driver depend on HAS_IOMEMHeiko Carstens1-1/+1
Fixes this compile error on s390: drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_read_reg': drivers/net/can/sja1000/sja1000_platform.c:42: error: implicit declaration of function 'ioread8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_write_reg': drivers/net/can/sja1000/sja1000_platform.c:47: error: implicit declaration of function 'iowrite8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_probe': drivers/net/can/sja1000/sja1000_platform.c:79: error: implicit declaration of function 'ioremap_nocache' Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23netxen: fix firmware init handshakeDhananjay Phadke2-18/+22
Make sure all functions run firmware init handshake. If PCI function 0 fails to initialize firmware, mark the state failed so that other functions on the same board bail out quickly instead of waiting 30s for firmware handshake. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23netxen: fix build with without CONFIG_PMDhananjay Phadke1-0/+4
wrap pci suspend() and resume() with CONFIG_PM check. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23[WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCIWim Van Sebroeck2-74/+66
Change the wdt_pci.c watchdog driver so that the code is the same for both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501_PCI. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23[WATCHDOG] hpwdt: Add NMI priority optionTom Mingarelli1-5/+21
Add a priority option so that the user can choose if we do the NMI first or last. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23[WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reloadUlrik Bech Hald1-0/+7
This patch contains two fixes: 1)In omap_wdt_probe() the watchdog is reset and disabled. This requires register access and the clks needs to be enabled temporarily 2)In omap_wdt_open() the timer register needs to be reloaded to trigger a new timer value (the default of 60s) Tested on OMAP34xx platform (Zoom1) Reviewed-by: Kevin Hilman <khilman@ti.deeprootsystems.com> Signed-off-by: Ulrik Bech Hald <ubh@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization ↵Manu Abraham1-3/+6
table was being loaded for a given chip version. This would cause the optimization in tuning not to be applied and thus a failed expectation, in tuning speed increment. The patch swaps the tables in use. It also fixes a possible one in a million condition where state->dev_ver implies an older Cut (Cut < 2.0, eventhough the driver doesn't attach to any Cut older than 2.0) or even negative (due to a bad I2C bus master driver) for the card combination. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing out the issue at large. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12130): Fix a redundant compiler warningManu Abraham1-1/+1
drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_optimize_carloop_short’: drivers/media/dvb/frontends/stv090x.c:2677: warning: ‘short_crl’ may be used uninitialized in this function Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-17 12:55:33 +0300