summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-11-02net: dsa: bcm_sf2: Fix IMP setup for port different than 8Florian Fainelli1-15/+21
Since it became possible for the DSA core to use a CPU port different than 8, our bcm_sf2_imp_setup() function was broken because it assumes that registers are applicable to port 8. In particular, the port's MAC is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS bits if we are not configured for port 8. Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02net: phylink: Fix phylink_dbg() macroFlorian Fainelli1-0/+16
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG) and as a result, it spams the kernel log since a PR_DEBUG level is currently used. Fix it to be defined appropriately whether CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set. Fixes: 17091180b152 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02gve: Fixes DMA synchronization.Yangchun Fu2-2/+24
Synces the DMA buffer properly in order for CPU and device to see the most up-to-data data. Signed-off-by: Yangchun Fu <yangchun@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02inet: stop leaking jiffies on the wireEric Dumazet1-1/+1
Historically linux tried to stick to RFC 791, 1122, 2003 for IPv4 ID field generation. RFC 6864 made clear that no matter how hard we try, we can not ensure unicity of IP ID within maximum lifetime for all datagrams with a given source address/destination address/protocol tuple. Linux uses a per socket inet generator (inet_id), initialized at connection startup with a XOR of 'jiffies' and other fields that appear clear on the wire. Thiemo Nagel pointed that this strategy is a privacy concern as this provides 16 bits of entropy to fingerprint devices. Let's switch to a random starting point, this is just as good as far as RFC 6864 is concerned and does not leak anything critical. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thiemo Nagel <tnagel@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02net/mlx5: DR, Support IPv4 and IPv6 mixed matcherAlex Vesker3-43/+52
Until now SW steering supported matchers that are IPv4 and IPv6. The limitation was mixed matchers in which the outer header IP version was different from the inner header IP version. To support the mixed matcher we create all the possible ste_builder combinations, once we create a rule we select the correct one to be used for rule creation. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: LAG, Use affinity type enumeratorsErez Alfasi2-6/+13
Instead of using explicit indexes, simply use affinity type enumerators to make the code more readable. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: LAG, Use port enumeratorsErez Alfasi3-57/+69
Instead of using explicit array indexes, simply use ports enumerators to make the code more readable. Fixes: 7907f23adc18 ("net/mlx5: Implement RoCE LAG feature") Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: rate limit alloc_ent error messagesLi RongQing1-1/+1
when debug a bug, which triggers TX hang, and kernel log is spammed with the following info message [ 1172.044764] mlx5_core 0000:21:00.0: cmd_work_handler:930:(pid 8): failed to allocate command entry Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5e: Add ToS (DSCP) header rewrite supportDmytro Linkin1-0/+1
Add support for rewriting of DSCP part of ToS field. Next commands, for example, can be used to offload rewrite action: OVS: $ ovs-ofctl add-flow ovs-sriov "ip, in_port=REP, \ actions=mod_nw_tos:68, output:NIC" iproute2 (used retain mask, as tc command rewrite whole ToS field): $ tc filter add dev REP ingress protocol ip prio 1 flower skip_sw \ ip_proto icmp action pedit munge ip tos set 68 retain 0xfc pipe \ action mirred egress redirect dev NIC Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5e: Bit sized fields rewrite supportDmytro Linkin1-60/+62
This patch doesn't change any functionality, but is a pre-step for adding support for rewriting of bit-sized fields, like DSCP and ECN in IPv4 header, similar fields in IPv6, etc. Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: WQ, Move short getters into header fileTariq Toukan2-24/+20
Move short Work Queue API getter functions into the WQ header file. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error eventsSaeed Mahameed3-0/+25
Dump the Work Queue's TX WQE descriptor when a completion with error is received. Example: [5.331832] mlx5_core 0000:00:04.0 enp0s4: Error cqe on cqn 0xa, ci 0x1, TXQ-SQ qpn 0xe, opcode 0xd, syndrome 0x2, vendor syndrome 0x0 [5.333127] 00000000: 55 65 02 75 31 fe c2 d2 6b 6c 62 1e f9 e1 d8 5c [5.333837] 00000010: d3 b2 6c b8 89 e4 84 20 0b f4 3c e0 f3 75 41 ca [5.334568] 00000020: 46 00 00 00 cd 70 a0 92 18 3a 01 de 00 00 00 00 [5.335313] 00000030: 7d bc 05 89 b2 e9 00 02 1e 00 00 0e 00 00 30 d2 [5.335972] WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 64 [5.336710] 00000000: 00 00 00 1e 00 00 0e 04 00 00 00 08 00 00 00 00 [5.337524] 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 33 33 [5.338151] 00000020: 00 00 00 16 52 54 00 00 00 01 86 dd 60 00 00 00 [5.338740] 00000030: 00 00 00 48 00 00 00 00 00 00 00 00 66 ba 58 14 Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: Support lockless FTE read lookupsParav Pandit2-15/+56
During connection tracking offloads with high number of connections, (40K connections per second), flow table group lock contention is observed. To improve the performance by reducing lock contention, lockless FTE read lookup is performed as described below. Each flow table entry is refcounted. Flow table entry is removed when refcount drops to zero. rhash table allows rcu protected lookup. Each hash table entry insertion and removal is write lock protected. Hence, it is possible to perform lockless lookup in rhash table using following scheme. (a) Guard FTE entry lookup per group using rcu read lock. (b) Before freeing the FTE entry, wait for all readers to finish accessing the FTE. Below example of one reader and write in parallel racing, shows protection in effect with rcu lock. lookup_fte_locked() rcu_read_lock(); search_hash_table() existing_flow_group_write_lock(); tree_put_node(fte) drop_ref_cnt(fte) del_sw_fte(fte) del_hash_table_entry(); call_rcu(); existing_flow_group_write_unlock(); get_ref_cnt(fte) fails rcu_read_unlock(); rcu grace period(); [..] kmem_cache_free(fte); Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: Do not hold group lock while allocating FTE in softwareParav Pandit1-9/+10
FTE memory allocation using alloc_fte() doesn't have any dependency on the flow group. Hence, do not hold flow group lock while performing alloc_fte(). This helps to reduce contention of flow group lock. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5e: Verify that rule has at least one fwd/drop actionVlad Buslov1-0/+6
Currently, mlx5 tc layer doesn't verify that rule has at least one forward or drop action which leads to following firmware syndrome when user tries to offload such action: [ 1824.860501] mlx5_core 0000:81:00.0: mlx5_cmd_check:753:(pid 29458): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a) Add check at the end of parse_tc_fdb_actions() that verifies that resulting attribute has action fwd or drop flag set. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: Clear VF's configuration on disabling SRIOVAya Levin4-10/+21
When setting number of VFs to 0 (disable SRIOV), clear VF's configuration. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: Remove unneeded variable in mlx5_unload_onezhong jiang1-3/+1
mlx5_unload_one do not need local variable to store different value, Hence just remove it. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: FPGA, support network cards with standalone FPGAIgor Leshenko2-25/+46
Not all mlx5 cards with FPGA device use it for network processing. mlx5_core driver configures network connection to FPGA device for all mlx5 cards with installed FPGA. If FPGA is not a part of network path, driver crashes in this case Check FPGA name in function mlx5_fpga_device_start() and continue integrate FPGA into packets flow only for dedicated cards. Currently there are Newton and Edison cards. Signed-off-by: Igor Leshenko <igorle@mellanox.com> Reviewed-by: Meir Lichtinger <meirl@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02net/mlx5: DR, Replace CRC32 implementation to use kernel libHamdan Igbaria5-106/+10
Use kernel function to calculate crc32 Instead of dr implementation since it has the same algorithm "slice by 8". Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-02Merge branch '1GbE' of ↵David S. Miller6-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-11-01 This series contains updates to e1000, igb, igc, ixgbe, i40e and driver documentation. Lyude Paul fixes an issue where a fatal read error occurs when the device is unplugged from the machine. So change the read error into a warn while the device is still present. Manfred Rudigier found that the i350 device was not apart of the "Media Auto Sense" feature, yet the device supports it. So add the missing i350 device to the check and fix an issue where the media auto sense would flip/flop when no cable was connected to the port causing spurious kernel log messages. I fixed an issue where the fix to resolve receive buffer starvation was applied in more than one place in the driver, one being the incorrect location in the i40e driver. Wenwen Wang fixes a potential memory leak in e1000 where allocated memory is not properly cleaned up in one of the error paths. Jonathan Neuschäfer cleans up the driver documentation to be consistent and remove the footnote reference, since the footnote no longer exists in the documentation. Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear it twice. v2: Fixed alignment issue in patch 3 of the series based on community feedback. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01ixgbe: Remove duplicate clear_bit() callIgor Pylypiv1-1/+0
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared. Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-01e1000: fix memory leaksWenwen Wang1-4/+3
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if e1000_up() fails, leading to memory leaks. Refactor the code to fix this issue. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-01i40e: Fix receive buffer starvation for AF_XDPJeff Kirsher1-5/+0
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP got applied to both the i40e_xsk_umem_enable/disable() functions, when it should have only been applied to the "enable". So clean up the undesired code in the disable function. CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1f459bdc2007 ("i40e: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2019-11-01igb: Fix constant media auto sense switching when no cable is connectedManfred Rudigier1-1/+2
At least on the i350 there is an annoying behavior that is maybe also present on 82580 devices, but was probably not noticed yet as MAS is not widely used. If no cable is connected on both fiber/copper ports the media auto sense code will constantly swap between them as part of the watchdog task and produce many unnecessary kernel log messages. The swap code responsible for this behavior (switching to fiber) should not be executed if the current media type is copper and there is no signal detected on the fiber port. In this case we can safely wait until the AUTOSENSE_EN bit is cleared. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-01Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds7-18/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Various fixes all over the map: prevent boot crashes on HyperV, classify UEFI randomness as bootloader randomness, fix EFI boot for the Raspberry Pi2, fix efi_test permissions, etc" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN x86, efi: Never relocate kernel below lowest acceptable address efi: libstub/arm: Account for firmware reserved memory at the base of RAM efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness efi/tpm: Return -EINVAL when determining tpm final events log size fails efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
2019-11-01Merge tag 'wireless-drivers-2019-11-01' of ↵David S. Miller16-139/+305
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Third set of fixes for 5.4. Most of them are for iwlwifi but important fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being most important. iwlwifi * fix merge damage on earlier patch * various fixes to device id handling * fix scan config command handling which caused firmware asserts rtlwifi * fix overflow on P2P IE handling * don't deliver too small frames to mac80211 mt76 * disable PCIE_ASPM * fix buffer DMA unmap on certain cases ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01net: ethernet: arc: add the missed clk_disable_unprepareChuhong Yuan1-0/+3
The remove misses to disable and unprepare priv->macclk like what is done when probe fails. Add the missed call in remove. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01Merge tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drmLinus Torvalds32-90/+224
Pull drm fixes from Dave Airlie: "This is the regular drm fixes pull request for 5.4-rc6. It's a bit larger than I'd like but then last week was quieter than usual. The main fixes are amdgpu, and the two bigger area are navi fixes which are the newest GPU range so still getting actively fixed up, but also a bunch of clang stack alignment fixes (as amdgpu uses double in some places). Otherwise it's all fairly run of the mill fixes, i915, panfrost, etnaviv, v3d and radeon, along with a core scheduler fix. Summary: amdgpu: - clang alignment fixes - Updated golden settings - navi: gpuvm, sdma and display fixes - Freesync fix - Gamma fix for DCN - DP dongle detection fix - vega10: Fix for undervolting radeon: - reenable kexec fix for ppc scheduler: - set an error if hw job failed i915: - fix PCH reference clock for HSW/BDW - TGL display PLL doc fix panfrost: - warning fix - runtime pm fix - bad pointer dereference fix v3d: - memleak fix etnaviv: - memory corruption fix - deadlock fix - reintroduce lost debug message" * tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/amdgpu: enable -msse2 for GCC 7.1+ users drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+ drm/amdgpu: fix stack alignment ABI mismatch for Clang drm/radeon: Fix EEH during kexec drm/amdgpu/gmc10: properly set BANK_SELECT and FRAGMENT_SIZE drm/amdgpu/powerplay/vega10: allow undervolting in p7 dc.c:use kzalloc without test drm/amd/display: setting the DIG_MODE to the correct value. drm/amd/display: Passive DP->HDMI dongle detection fix drm/amd/display: add 50us buffer as WA for pstate switch in active drm/amd/display: Allow inverted gamma drm/amd/display: do not synchronize "drr" displays drm/amdgpu: If amdgpu_ib_schedule fails return back the error. drm/sched: Set error to s_fence if HW job submission failed. drm/amdgpu/gfx10: update gfx golden settings for navi12 drm/amdgpu/gfx10: update gfx golden settings for navi14 drm/amdgpu/gfx10: update gfx golden settings drm/amd/display: Change Navi14's DWB flag to 1 drm/amdgpu/sdma5: do not execute 0-sized IBs (v2) drm/amdgpu: Fix SDMA hang when performing VKexample test ...
2019-11-01Merge tag 'pm-5.4-rc6' of ↵Linus Torvalds2-26/+42
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a recently introduced (mostly theoretical) issue that the requests to confine the maximum CPU frequency coming from the platform firmware may not be taken into account if multiple CPUs are covered by one cpufreq policy on a system with ACPI" * tag 'pm-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Add QoS requests for all CPUs
2019-11-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds17-123/+126
Pull rdma fixes from Jason Gunthorpe: "A number of bug fixes and a regression fix: - Various issues from static analysis in hfi1, uverbs, hns, and cxgb4 - Fix for deadlock in a case when the new auto RDMA module loading is used - Missing _irq notation in a prior -rc patch found by lockdep - Fix a locking and lifetime issue in siw - Minor functional bug fixes in cxgb4, mlx5, qedr - Fix a regression where vlan interfaces no longer worked with RDMA CM in some cases" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Prevent memory leaks of eq->buf_list RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case RDMA/mlx5: Use irq xarray locking for mkey_table IB/core: Avoid deadlock during netlink message handling RDMA/nldev: Skip counter if port doesn't match RDMA/uverbs: Prevent potential underflow IB/core: Use rdma_read_gid_l2_fields to compare GID L2 fields RDMA/qedr: Fix reported firmware version RDMA/siw: free siw_base_qp in kref release routine RDMA/iwcm: move iw_rem_ref() calls out of spinlock iw_cxgb4: fix ECN check on the passive accept IB/hfi1: Use a common pad buffer for 9B and 16B packets IB/hfi1: Avoid excessive retry for TID RDMA READ request RDMA/mlx5: Clear old rate limit when closing QP
2019-11-01Merge tag 'drm-fixes-5.4-2019-10-30' of ↵Dave Airlie21-67/+165
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-10-30: amdgpu: - clang fixes - Updated golden settings - GPUVM fixes for navi - Navi sdma fix - Navi display fixes - Freesync fix - Gamma fix for DCN - DP dongle detection fix - Fix for undervolting on vega10 radeon: - enable kexec fix for PPC scheduler: - set an error on fence if hw job failed Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191030162339.44366-1-alexander.deucher@amd.com
2019-11-01Merge tag 'drm-intel-fixes-2019-10-31' of ↵Dave Airlie4-7/+25
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix PCH reference clock for FDI on HSW/BDW which was causing users blank screen - Small documentation fix for TGL display PLLs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191031171209.GA6586@intel.com
2019-11-01Merge tag 'drm-misc-fixes-2019-10-30-1' of ↵Dave Airlie4-9/+14
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - three fixes for panfrost, one to silence a warning, one to fix runtime_pm and one to prevent bogus pointer dereferences - one fix for a memleak in v3d Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191030182207.evrscl7lnv42u5zu@hendrix
2019-11-01Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie3-7/+20
into drm-fixes One memory corruption fix in the MMUv2 GPU coredump code, a deadlock fix also in the coredump code and reintroduction of a helpful message, which got dropped by accident in this cycle. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/b0d640267662e3ce5e0089d0afedc1baba55058d.camel@pengutronix.de
2019-11-01hp100: Move 100BaseVG AnyLAN driver to stagingJoe Perches8-2/+3
100BaseVG AnyLAN hasn't been useful since 1996 or so and even then didn't sell many devices. It's unlikely any are still in use. Move the driver to staging with the intent of removing it altogether one day. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during suspend/resume.Pavan Chebbi1-0/+2
Inform the RDMA driver to stop/start during suspend/resume. The RDMA driver needs to stop and start just like error recovery. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during error recovery.Vasundhara Volam1-9/+14
Notify the RDMA driver by calling the bnxt_ulp_stop()/bnxt_ulp_start() hooks during error recovery. The current ULP IRQ start/stop sequence in error recovery (which is insufficient) is replaced with the full reset sequence when we call bnxt_ulp_stop()/bnxt_ulp_start(). Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt_en: Improve bnxt_ulp_stop()/bnxt_ulp_start() call sequence.Vasundhara Volam3-11/+20
We call bnxt_ulp_stop() to notify the RDMA driver that some error or imminent reset is about to happen. After that we always call some variants of bnxt_close(). In the next patch, we will integrate the recently added error recovery with the RDMA driver. In response to ulp_stop, the RDMA driver may free MSIX vectors and that will also trigger bnxt_close(). To avoid bnxt_close() from being called twice, we set a new flag after ulp_stop is called. If the RDMA driver frees MSIX vectors while the new flag is set, we will not call bnxt_close(), knowing that it will happen in due course. With this change, we must make sure that the bnxt_close() call after ulp_stop will reset IRQ. Modify bnxt_reset_task() accordingly if we call ulp_stop. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacksSriharsha Basavapatna3-2/+165
The decap (VXLAN tunnel) flow rules are not getting offloaded with upstream kernel. This is because TC block callback infrastructure has been updated to use indirect callbacks to get offloaded rules from other higher level devices (such as tunnels), instead of ndo_setup_tc(). Since the decap rules are applied to the tunnel devices (e.g, vxlan_sys), the driver should register for indirect TC callback with tunnel devices to get the rules for offloading. This patch updates the driver to register and process indirect TC block callbacks from VXLAN tunnels. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt_en: Add support for NAT(L3/L4 rewrite)Somnath Kotur2-7/+144
Provides support for modifying L3/L4 Header parameters to support NAT. Sets the appropriate fields/bits in cfa_flow_alloc cmd. Sample cmd for offloading an IPv4 flow with SNAT: ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \ actions=mod_nw_src:203.31.220.144,output:p7p1" Replace 'nw_src' with 'nw_dst' in above cmd for DNAT with IPv4 Sample cmd for offloading an IPv4 flow with SNAPT: ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \ actions=mod_nw_src:203.31.220.144, mod_tp_src:6789,output:p7p1" Similar to DNAT, replace 'tp_src' with 'tp_dst' for offloading flow with DNAPT Sample cmd for offloading an IPv6 flow with SNAT: ovs-ofctl add-flow ovsbr0 "ipv6, ipv6_src=2001:5c0:9168::2/64 \ actions=load:0x1->NXM_NX_IPV6_SRC[0..63], \ load:0x20010db801920000->NXM_NX_IPV6_SRC[64..127],output:p7p1" Replace 'SRC' with DST' above for IPv6 DNAT Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt: Avoid logging an unnecessary message when a flow can't be offloadedSomnath Kotur1-1/+2
For every single case where bnxt_tc_can_offload() can fail, we are logging a user friendly descriptive message anyway, but because of the path it would take in case of failure, another redundant error message would get logged. Just freeing the node and returning from the point of failure should suffice. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bnxt_en: Add support for L2 rewriteVenkat Duvvuru2-0/+143
This patch adds support for packet edit offload of L2 fields (src mac & dst mac, also referred as L2 rewrite). Only when the mask is fully exact match for a field, the command is sent down to the adapter to offload such a flow. Otherwise, an error is returned. v2: Fix pointer alignment issue in bnxt_fill_l2_rewrite_fields() [MChan] Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01net: dsa: list DSA links in the fabricVivien Didelot1-4/+4
Implement a new list of DSA links in the switch fabric itself, to provide an alterative to the ds->rtable static arrays. At the same time, provide a new dsa_routing_port() helper to abstract the usage of ds->rtable in drivers. If there's no port to reach a given device, return the first invalid port, ds->num_ports. This avoids potential signedness errors or the need to define special values. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01dpaa2-eth: add MAC/PHY support through phylinkIoana Ciornei9-21/+816
The dpaa2-eth driver now has support for connecting to its associated PHY device found through standard OF bindings. This happens when the DPNI object (that the driver probes on) gets connected to a DPMAC. When that happens, the device tree is looked up by the DPMAC ID, and the associated PHY bindings are found. The old logic of handling the net device's link state by hand still needs to be kept, as the DPNI can be connected to other devices on the bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only engaged when there is no DPMAC (and therefore no phylink instance) attached. The MC firmware support multiple type of DPMAC links: TYPE_FIXED, TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from Linux side, and as such, the driver will not handle such a DPMAC. Although PHYLINK typically handles SFP cages and in-band AN modes, for the moment the driver only supports the RGMII interfaces found on the LX2160A. Support for other modes will come later. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01dpaa2-eth: update the TX frame queues on DPNI_IRQ_EVENT_ENDPOINT_CHANGEDIoana Ciornei1-4/+3
Currently the function is called at every link up event, although the FQID values will only change when the DPNI is disconnected from the current object and reconnected to a different one. The patch also avoids the forward declaration of update_tx_fqids. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bus: fsl-mc: add the fsl_mc_get_endpoint functionIoana Ciornei4-4/+130
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can find its associated endpoint (another object at the other link of a MC firmware link). The API will be used in the following patch in order to discover the connected DPMAC object of a DPNI. Also, the fsl_mc_device_lookup function is made available to the entire fsl-mc bus driver and not just for the dprc driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01bus: fsl-mc: export device types present on the busIoana Ciornei1-0/+10
Export all device types present on the fsl-mc bus in order to be able to actually use the is_fsl_mc_bus_*() functions from drivers on the bus. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01sfc: add XDP counters to ethtool statsCharles McLachlan3-0/+42
Count XDP packet drops, error drops, transmissions and redirects and expose these counters via the ethtool stats command. Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01sfc: handle XDP_TX outcomes of XDP eBPF programsCharles McLachlan4-1/+116
Provide an ndo_xdp_xmit function that uses the XDP tx queue for this CPU to send the packet. Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01sfc: allocate channels for XDP tx queuesCharles McLachlan4-40/+190
Each CPU needs access to its own queue to allow uncontested transmission of XDP_TX packets. This means we need to allocate (up front) enough channels ("xdp transmit channels") to provide at least one extra tx queue per CPU. These tx queues should not do TSO. Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-24 13:53:25 +0300