summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-04-29net: selftest: fix build issue if INET is disabledOleksij Rempel2-2/+2
In case ethernet driver is enabled and INET is disabled, selftest will fail to build. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 3e1e58d64c3d ("net: add generic selftest support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28net: tun: Remove redundant assignment to retYang Li1-1/+0
Variable 'ret' is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: drivers/net/tun.c:3008:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619603852-114996-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28net: phy: marvell: add downshift support for M88E1240Maxim Kochetkov1-0/+2
Add downshift support for 88E1240, it uses the same downshift configuration registers as 88E1011. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20210428095356.621536-1-fido_max@inbox.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255Colin Ian King1-1/+1
Currently the for-loop in ksz8_port_init_cnt is causing a static analysis infinite loop warning with the comparison of mib->cnt_ptr < dev->reg_mib_cnt. This occurs because mib->cnt_ptr is a u8 and dev->reg_mib_cnt is an int and the analyzer determines that mib->cnt_ptr potentially can wrap around to zero if the value in dev->reg_mib_cnt is > 255. However, this value is never this large, it is always less than 256 so make reg_mib_cnt a u8. Addresses-Coverity: ("Infinite loop") Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428120010.337959-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queuesIgnat Korchagin1-0/+2
efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Fixes: e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues") Cc: <stable@vger.kernel.org> # 5.12.x Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: Add Microchip KSZ8863 SMI based driver supportMichael Grzeschik3-1/+223
Add KSZ88X3 driver support. We add support for the KXZ88X3 three port switches using the Microchip SMI Interface. They are supported using the MDIO-Bitbang Interface. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: phy: Add support for microchip SMI0 MDIO busAndrew Lunn2-2/+14
SMI0 is a mangled version of MDIO. The main low level difference is the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The read/write information is instead encoded in the PHY address. Extend the bit-bang code to allow the op code to be overridden, but default to normal C22 values. Add an extra compatible to the mdio-gpio driver, and when this compatible is present, set the op codes to 0. A higher level driver, sitting on top of the basic MDIO bus driver can then implement the rest of the microchip SMI0 odderties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: Add Microchip KSZ8863 SPI based driver supportMichael Grzeschik1-12/+32
Add KSZ88X3 driver support. We add support for the KXZ88X3 three port switches using the SPI Interface. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: add support for ksz88xx chipsOleksij Rempel3-71/+281
We add support for the ksz8863 and ksz8873 chips which are using the same register patterns but other offsets as the ksz8795. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: move register offsets and shifts to separate ↵Michael Grzeschik3-160/+281
struct In order to get this driver used with other switches the functions need to use different offsets and register shifts. This patch changes the direct use of the register defines to register description structures, which can be set depending on the chips register layout. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: move cpu_select_interface to extra functionMichael Grzeschik1-42/+50
This patch moves the cpu interface selection code to a individual function specific for ksz8795. It will make it simpler to customize the code path for different switches supported by this driver. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: change drivers prefix to be genericMichael Grzeschik3-117/+111
The driver can be used on other chips of this type. To reflect this we rename the drivers prefix from ksz8795 to ksz8. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: mscc: ocelot: support PTP Sync one-step timestampingYangbo Lu2-4/+57
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp configuration, the PTP Sync one-step timestamping had never been supported. This patch is to truely support it. - ocelot_port_txtstamp_request() This function handles tx timestamp request by storing ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd, and additionally for two-step timestamp storing ts_id in OCELOT_SKB_CB(clone)->ptp_cmd. - ocelot_ptp_rew_op() During xmit, this function is called to get rew_op (rewriter option) by checking skb->cb for tx timestamp request, and configure to transmitting. Non-onestep-Sync packet with one-step timestamp request falls back to use two-step timestamp. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: mscc: ocelot: convert to ocelot_port_txtstamp_request()Yangbo Lu3-22/+35
Convert to a common ocelot_port_txtstamp_request() for TX timestamp request handling. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: free skb->cb usage in core driverYangbo Lu5-8/+8
Free skb->cb usage in core driver and let device drivers decide to use or not. The reason having a DSA_SKB_CB(skb)->clone was because dsa_skb_tx_timestamp() which may set the clone pointer was called before p->xmit() which would use the clone if any, and the device driver has no way to initialize the clone pointer. This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning of dsa_slave_xmit(). Some new features in the future, like one-step timestamp may need more bytes of skb->cb to use in dsa_skb_tx_timestamp(), and p->xmit(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: no longer clone skb in core driverYangbo Lu7-36/+54
It was a waste to clone skb directly in dsa_skb_tx_timestamp(). For one-step timestamping, a clone was not needed. For any failure of port_txtstamp (this may usually happen), the skb clone had to be freed. So this patch moves skb cloning for tx timestamp out of dsa core, and let drivers clone skb in port_txtstamp if they really need. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: no longer identify PTP packet in core driverYangbo Lu7-10/+18
Move ptp_classify_raw out of dsa core driver for handling tx timestamp request. Let device drivers do this if they want. Not all drivers want to limit tx timestamping for only PTP packet. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: check tx timestamp request in core driverYangbo Lu3-9/+1
Check tx timestamp request in core driver at very beginning of dsa_skb_tx_timestamp(), so that most skbs not requiring tx timestamp just return. And drop such checking in device drivers. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28fddi/skfp: fix typoqhjindev1-1/+1
change 'privae' to 'private' Signed-off-by: qhjindev <qhjin_dev@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODETobias Waldekranz1-3/+3
The .serdes_get_lane op used the magic value 0xff to indicate a valid SERDES lane and 0 signaled that a non-SERDES mode was set on the port. Unfortunately, "0" is also a valid lane ID, so even when these ports where configured to e.g. RGMII the driver would set them up as SERDES ports. - Replace 0xff with 0 to indicate a valid lane ID. The number is on the one hand just as arbitrary, but it is at least the first valid one and therefore less of a surprise. - Follow the other .serdes_get_lane implementations and return -ENODEV in the case where no SERDES is assigned to the port. Fixes: f5be107c3338 ("net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: phy: marvell-88x2222: enable autoneg by defaultIvan Bornyakov1-2/+0
There is no real need for disabling autonigotiation in config_init(). Leave it enabled by default. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28macvlan: Use 'hash' iterators to simplify codeChristophe JAILLET1-27/+18
Use 'hash_for_each_rcu' and 'hash_for_each_safe' instead of hand writing them. This saves some lines of code, reduce indentation and improve readability. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_sendLv Yunlong1-1/+3
In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..). If some error happens in emac_tx_fill_tpd(), the skb will be freed via dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd(). But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len). As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len, thus my patch assigns skb->len to 'len' before the possible free and use 'len' instead of skb->len later. Fixes: b9b17debc69d2 ("net: emac: emac gigabit ethernet controller driver") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26net: hso: fix NULL-deref on disconnect regressionJohan Hovold1-1/+1
Commit 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration") fixed the racy minor allocation reported by syzbot, but introduced an unconditional NULL-pointer dereference on every disconnect instead. Specifically, the serial device table must no longer be accessed after the minor has been released by hso_serial_tty_unregister(). Fixes: 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration") Cc: stable@vger.kernel.org Cc: Anirudh Rayabharam <mail@anirudhrb.com> Reported-by: Leonardo Antoniazzi <leoanto@aruba.it> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge tag 'linux-can-next-for-5.13-20210426' of ↵David S. Miller2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-04-26 this is a pull request of 4 patches for net-next/master. the first two patches are from Colin Ian King and target the etas_es58x driver, they add a missing NULL pointer check and fix some typos. The next two patches are by Erik Flodin. The first one updates the CAN documentation regarding filtering, the other one fixes the header alignment in CAN related proc output on 64 bit systems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26net: davicom: Remove redundant assignment to retJiapeng Chong1-1/+0
Variable ret is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/davicom/dm9000.c:1527:5: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26pcnet32: Remove redundant variable prev_link and curr_linkJiapeng Chong1-2/+1
Variable prev_link and curr_link is being assigned a value from a calculation however the variable is never read, so this redundant variable can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/amd/pcnet32.c:2857:4: warning: Value stored to 'prev_link' is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/amd/pcnet32.c:2856:4: warning: Value stored to 'curr_link' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller14-71/+109
2021-04-26bnxt_en: Implement .ndo_features_check().Michael Chan2-2/+42
For UDP encapsultions, we only support the offloaded Vxlan port and Geneve port. All other ports included FOU and GUE are not supported so we need to turn off TSO and checksum features. v2: Reverse the check for supported UDP ports to be more straight forward. Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Support IFF_SUPP_NOFCS feature to transmit without ethernet FCS.Michael Chan2-3/+14
If firmware is capable, set the IFF_SUPP_NOFCS flag to support the sockets option to transmit packets without FCS. This is mainly used for testing. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Add PCI IDs for Hyper-V VF devices.Michael Chan1-1/+18
Support VF device IDs used by the Hyper-V hypervisor. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Call bnxt_approve_mac() after the PF gives up control of the VF MAC.Michael Chan1-1/+10
When the PF is no longer enforcing an assigned MAC address on a VF, the VF needs to call bnxt_approve_mac() to tell the PF what MAC address it is now using. Otherwise it gets out of sync and the PF won't know what MAC address the VF wants to use. Ultimately the VF will fail when it tries to setup the L2 MAC filter for the vnic. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Move bnxt_approve_mac().Michael Chan1-26/+27
Move it before bnxt_update_vf_mac(). In the next patch, we need to call bnxt_approve_mac() from bnxt_update_mac() under some conditions. This will avoid forward declaration. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: allow VF config ops when PF is closedEdwin Peer1-4/+0
It is perfectly legal for the stack to query and configure VFs via PF NDOs while the NIC is administratively down. Remove the unnecessary check for the PF to be in open state. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: allow promiscuous mode for trusted VFsEdwin Peer3-7/+11
Firmware previously only allowed promiscuous mode for VFs associated with a default VLAN. It is now possible to enable promiscuous mode for a VF having no VLAN configured provided that it is trusted. In such cases the VF will see all packets received by the PF, irrespective of destination MAC or VLAN. Note, it is necessary to query firmware at the time of bnxt_promisc_ok() instead of in bnxt_hwrm_func_qcfg() because the trusted status might be altered by the PF after the VF has been configured. This check must now also be deferred because the firmware call sleeps. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Add support for fw managed link down feature.Michael Chan2-1/+3
In the current code, the driver will not shutdown the link during IFDOWN if there are still VFs sharing the port. Newer firmware will manage the link down decision when the port is shared by VFs, so we can just call firmware to shutdown the port unconditionally and let firmware make the final decision. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Add a new phy_flags field to the main driver structure.Michael Chan3-34/+22
Copy the phy related feature flags from the firmware call HWRM_PORT_PHY_QCAPS to this new field. We can also remove the flags field in the bnxt_test_info structure. It's cleaner to have all PHY related flags in one location, directly copied from the firmware. To keep the BNXT_PHY_CFG_ABLE() macro logic the same, we need to make a slight adjustment to check that it is a PF. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: report signal mode in link up messagesEdwin Peer1-3/+19
Firmware reports link signalling mode for certain speeds. In these cases, print the signalling modes in kernel log link up messages. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26macvlan: Add nodst option to macvlan type sourceJethro Beekman1-5/+14
The default behavior for source MACVLAN is to duplicate packets to appropriate type source devices, and then do the normal destination MACVLAN flow. This patch adds an option to skip destination MACVLAN processing if any matching source MACVLAN device has the option set. This allows setting up a "catch all" device for source MACVLAN: create one or more devices with type source nodst, and one device with e.g. type vepa, and incoming traffic will be received on exactly one device. v2: netdev wants non-standard line length Signed-off-by: Jethro Beekman <kernel@jbeekman.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge tag 'mlx5-updates-2021-04-21' of ↵David S. Miller16-422/+701
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-04-21 devlink external port attribute for SF (Sub-Function) port flavour This adds the support to instantiate Sub-Functions on external hosts E.g when Eswitch manager is enabled on the ARM SmarNic SoC CPU, users are now able to spawn new Sub-Functions on the Host server CPU. Parav Pandit Says: ================== This series introduces and uses external attribute for the SF port to indicate that a SF port belongs to an external controller. This is needed to generate unique phys_port_name when PF and SF numbers are overlapping between local and external controllers. For example two controllers 0 and 1, both of these controller have a SF. having PF number 0, SF number 77. Here, phys_port_name has duplicate entry which doesn't have controller number in it. Hence, add controller number optionally when a SF port is for an external controller. This extension is similar to existing PF and VF eswitch ports of the external controller. When a SF is for external controller an example view of external SF port and config sequence: On eswitch system: $ devlink dev eswitch set pci/0033:01:00.0 mode switchdev $ devlink port show pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1 pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached phys_port_name construction: $ cat /sys/class/net/eth1/phys_port_name c1pf0sf77 Patch summary: First 3 patches prepares the eswitch to handle vports in more generic way using xarray to lookup vport from its unique vport number. Patch-1 returns maximum eswitch ports only when eswitch is enabled Patch-2 prepares eswitch to return eswitch max ports from a struct Patch-3 uses xarray for vport and representor lookup Patch-4 considers SF for an additioanl range of SF vports Patch-5 relies on SF hw table to check SF support Patch-6 extends SF devlink port attribute for external flag Patch-7 stores the per controller SF allocation attributes Patch-8 uses SF function id for filtering events Patch-9 uses helper for allocation and free Patch-10 splits hw table into per controller table and generic one Patch-11 extends sf table for additional range ================== ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26net: ethernet: ixp4xx: Support device tree probingLinus Walleij2-63/+148
This adds device tree probing to the IXP4xx ethernet driver. Add a platform data bool to tell us whether to register an MDIO bus for the device or not, as well as the corresponding NPE. We need to drop the memory region request as part of this since the OF core will request the memory for the device. Cc: Zoltan HERPAI <wigyori@uid0.hu> Cc: Raylynn Knight <rayknight@me.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26net: ethernet: ixp4xx: Retire ancient phy retrievealLinus Walleij1-5/+5
This driver was using a really dated way of obtaining the phy by printing a string and using it with phy_connect(). Switch to using more reasonable modern interfaces. Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26r8152: remove some bit operationsHayes Wang1-7/+7
Remove DELL_TB_RX_AGG_BUG and LENOVO_MACPASSTHRU flags of rtl8152_flags. They are only set when initializing and wouldn't be change. It is enough to record them with variables. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26hv_netvsc: Make netvsc/VF binding check both MAC and serial numberDexuan Cui1-2/+12
Currently the netvsc/VF binding logic only checks the PCI serial number. The Microsoft Azure Network Adapter (MANA) supports multiple net_device interfaces (each such interface is called a "vPort", and has its unique MAC address) which are backed by the same VF PCI device, so the binding logic should check both the MAC address and the PCI serial number. The change should not break any other existing VF drivers, because Hyper-V NIC SR-IOV implementation requires the netvsc network interface and the VF network interface have the same MAC address. Co-developed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Co-developed-by: Shachar Raindel <shacharr@microsoft.com> Signed-off-by: Shachar Raindel <shacharr@microsoft.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26bnxt_en: Fix RX consumer index logic in the error path.Michael Chan1-2/+4
In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Fixes: a1b0e4e684e9 ("bnxt_en: Improve RX consumer index validity check.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26ch_ktls: Remove redundant variable resultJiapeng Chong1-6/+4
Variable result is being assigned a value from a calculation however the variable is never read, so this redundant variable can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1488:2: warning: Value stored to 'pos' is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:876:3: warning: Value stored to 'pos' is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:36:3: warning: Value stored to 'start' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-24can: etas_es58x: Fix a couple of spelling mistakesColin Ian King1-2/+2
There are spelling mistakes in netdev_dbg and netdev_dbg messages, fix these. Link: https://lore.kernel.org/r/20210415113050.1942333-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-24can: etas_es58x: Fix missing null check on netdev pointerColin Ian King1-1/+1
There is an assignment to *netdev that is that can potentially be null but the null check is checking netdev and not *netdev as intended. Fix this by adding in the missing * operator. Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/r/20210415084723.1807935-1-colin.king@canonical.com Addresses-Coverity: ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-24net/mlx5: SF, Extend SF table for additional SF id rangeParav Pandit6-53/+140
Extended the SF table to cover additioanl SF id range of external controller. A user optionallly provides the external controller number when user wants to create SF on the external controller. An example on eswitch system: $ devlink dev eswitch set pci/0033:01:00.0 mode switchdev $ devlink port show pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1 pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 external true splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-24net/mlx5: SF, Split mlx5_sf_hw_table into two partsParav Pandit1-29/+58
Device has SF ids in two different contiguous ranges. One for the local controller and second for the external controller's PF. Each such range has its own maximum number of functions and base id. To allocate SF from either of the range, prepare code to split into range specific fields into its own structure. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 14:18:19 +0300