summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-04-07vhost-net: fix vq_memory_access_ok error checkingJeff Dike1-0/+4
vq_memory_access_ok needs to check whether mem == NULL Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-18vhost: fix error handling in vring ioctlsMichael S. Tsirkin1-6/+12
Stanse found a locking problem in vhost_set_vring: several returns from VHOST_SET_VRING_KICK, VHOST_SET_VRING_CALL, VHOST_SET_VRING_ERR with the vq->mutex held. Fix these up. Reported-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Laurent Chavey <chavey@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-17vhost: fix interrupt mitigation with raw socketsMichael S. Tsirkin1-1/+1
A thinko in code means we never trigger interrupt mitigation. Fix this. Reported-by: Juan Quintela <quintela@redhat.com> Reported-by: Unai Uribarri <unai.uribarri@optenet.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-07vhost: fix error path in vhost_net_set_backendJeff Dike1-3/+5
An error could cause vhost_net_set_backend to exit without unlocking vq->mutex. Fix this. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-28vhost-net: restart tx poll on sk_sndbuf fullSridhar Samudrala1-1/+5
guest to remote communication with vhost net sometimes stops until guest driver is restarted. This happens when we get guest kick precisely when the backend send queue is full, as a result handle_tx() returns without polling backend. This patch fixes this by restarting tx poll on this condition. Signed-off-by: Sridhar Samudrala <samudrala@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Tom Lendacky <toml@us.ibm.com>
2010-02-28vhost: fix get_user_pages_fast error handlingMichael S. Tsirkin1-1/+2
get_user_pages_fast returns number of pages on success, negative value on failure, but never 0. Fix vhost code to match this logic. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-28vhost: initialize log eventfd context pointerMichael S. Tsirkin1-0/+1
vq log eventfd context pointer needs to be initialized, otherwise operation may fail or oops if log is enabled but log eventfd not set by userspace. When log_ctx for device is created, it is copied to the vq. This reset was missing. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-28vhost: logging thinko fixMichael S. Tsirkin1-4/+8
vhost was dong some complex math to get offset to log at, and got it wrong by a couple of bytes, while in fact it's simple: get address where we write, subtract start of buffer, add log base. Do it this way. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-28wireless: convert to use netdev_for_each_mc_addrJiri Pirko7-36/+31
also added missed locking in rndis_wlan.c Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28ipoib: returned back addrlen check for mc addressesJiri Pirko1-1/+5
Apparently bogus mc address can break IPOIB multicast processing. Therefore returning the check for addrlen back until this is resolved in bonding (I don't see any other point from where mc address with non-dev->addr_len length can came from). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28axnet_cs: add new idKen Kawasaki1-0/+1
axnet_cs: add new id (corega PCC-TXM) Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Merge branch 'master' of ↵David S. Miller15-21/+23
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-02-28tg3: Remove now useless VPD codeMatt Carlson1-29/+23
Now that the VPD searching code is abstracted away, the outer loop used to detect the read-only large resource data type section is useless. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bnx2: Remove now useless VPD codeMatt Carlson1-45/+29
Now that the VPD searching code is abstracted away, the outer loop used to detect the read-only large resource data type section is useless. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28pci: Add helper to search for VPD keywordsMatt Carlson3-43/+61
This patch adds the pci_vpd_find_info_keyword() helper function to find information field keywords within read-only and read-write large resource data type sections. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28pci: Add VPD information field helper functionsMatt Carlson2-8/+10
This patch adds a preprocessor constant to describe the PCI VPD information field header size and an inline function to extract the size of the information field itself. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28pci: Add helper to find a VPD resource data typeMatt Carlson4-42/+53
This patch adds the pci_vpd_find_tag() helper function to find VPD resource data types in a buffer. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28pci: Add large and small resource data type codeMatt Carlson2-12/+34
This patch introduces more VPD preprocessor definitions to identify some small and large resource data type item names. The patch then continues to correct how the tg3 and bnx2 drivers search for the "read-only data" large resource data type. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28pci: Add PCI LRDT tag size and section sizeMatt Carlson2-10/+11
This patch adds a preprocessor constant to describe the PCI VPD large resource data type tag size and an inline function to extract the large resource section size from the large resource data type tag. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27Bluetooth: Convert Marvell driver to use per adapter debugfsMarcel Holtmann1-7/+7
The debugfs support of the Marvell driver is buggy. It is limited to one controller per system. Fix this by using the controller specific debugfs directory as parent. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Convert controller hdev->type to hdev->busMarcel Holtmann11-11/+11
The hdev->type is misnamed and should be actually hdev->bus instead. So convert it now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Add missing kfree() on error path in Atheros driverDan Carpenter1-0/+2
Add a couple kfree() calls on an error path. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Make USB device id constantMárton Németh1-1/+1
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make bcm203x_table also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Add __init/__exit macros to Marvell SDIO driverPeter Huewe1-2/+2
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of btmrvl_sdio.c driver. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27ixgbe: move TC_PRIO_CONTROL check into ixgbe_select_queue()John Fastabend1-10/+11
Move TC_PRIO_CONTROL check and queue remapping into ixgbe_select_queue(). Remapping queues after the qdisc can result in the wrong qdisc queue being stopped with netif_stop_subqueue(). Even if this is resolved and the correct queue is stopped it can result in a queue being blocked by TC_PRIO_CONTROL frames uneccesarily. Moving this into the select_queue routine maintains alignment between tx_rings and qdisc queues. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27bonding: fix device leak on error in bond_create()Patrick McHardy1-0/+2
When the register_netdevice() call fails, the newly allocated device is not freed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: support specifying device flags on device creationPatrick McHardy1-5/+10
commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27fs_enet: add FEC TX buffer alignment workaround for MPC5121Anatolij Gustschin1-0/+47
MPC5121 FEC requeries 4-byte alignmnent for TX data buffers. This patch is a work around that copies misaligned tx packets to an aligned skb before sending. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27fs_enet: Add support for MPC512x to fs_enet driverAnatolij Gustschin5-21/+95
Extend the fs_enet driver to support MPC512x FEC. Enable it with CONFIG_FS_ENET_MPC5121_FEC option. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27fs_enet: use dev_xxx instead of printkAnatolij Gustschin4-38/+27
Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27Merge branch 'master' of ↵David S. Miller10-73/+53
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-27b43: fall back gracefully to PIO mode after fatal DMA errorsLinus Torvalds3-7/+31
This makes the b43 driver just automatically fall back to PIO mode when DMA doesn't work. The driver already told the user to do it, so rather than have the user reload the module with a new flag, just make the driver do it automatically. We keep the message as an indication that something is wrong, but now just automatically fall back to the hopefully working PIO case. (Some post-2.6.33 merge fixups by Larry Finger <Larry.Finger@lwfinger.net> and yours truly... -- JWL) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-27ath9k: disable RIFS search for AR91xx based chipsFelix Fietkau2-0/+13
While ath9k does not support RIFS yet, the ability to receive RIFS frames is currently enabled for most chipsets in the initvals. This is causing baseband related issues on AR9160 and AR9130 based chipsets, which can lock up under certain conditions. This patch fixes these issues by overriding the initvals, effectively disabling RIFS for all affected chipsets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-27Merge branch 'wireless-next-2.6' of ↵John W. Linville3-62/+1
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-02-27Merge branch 'wireless-2.6' of ↵John W. Linville2-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-02-27Merge branch 'master' of ↵John W. Linville9-13/+35
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h net/mac80211/rate.c
2010-02-26net: Delete isa-skeleton net driverJeff Garzik1-718/+0
The ISA skeleton net driver has been obsolete and unmaintained for many years. Any hardware remotely like ISA will use the platform API and look much more like a PCI driver, and make much better use of netdev APIs such as NAPI. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26can: ti hecc module : add platform specific initialization callback.Sriramakrishnan1-1/+16
CAN module on AM3517 requires programming of IO expander as part of init sequence - to enable CAN PHY. Added platform specific callback to handle phy control(switch on /off). Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26infiniband: convert to use netdev_for_each_mc_addrJiri Pirko2-42/+51
Due to the loop complexicity in nes_nic.c, I'm using char* to copy mc addresses to it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26greth: fall through to common return statement on errorSimon Horman1-2/+0
There doesn't seem to be any reason to explicitly return NETDEV_TX_OK as err is set to NETDEV_TX_OK in all cases that reach this point. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26myri10ge: optimize 4k-boundary check when stocking rx pagesBrice Goglin1-4/+7
Small optimization to the code which checks to see if we'd cross a 4K boundary when stocking RX ring. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Guillaume Morin <guillaume@morinfr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Update version to 2.1.1.Michael Chan4-6/+6
And update copyright to 2010. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Use union for the status blocks of different devices.Michael Chan2-21/+23
We only need to assign the status block address once and it also saves space in the structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Simplify route checking during iSCSI connection.Michael Chan1-24/+13
With a separate IP address for iSCSI, connections should proceed whether or not we can get a route to the target from the network stack. It is possible that the network IP address may not reach the iSCSI target. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Fix panic in cnic_iscsi_nl_msg_recv() when device is down.Michael Chan1-0/+7
Some data structures are freed when the device is down and it will crash if an ISCSI netlink message is received. Add RCU protection to prevent this. In the shutdown path, ulp_ops[CNIC_ULP_L4] is assigned NULL and rcu_synchronized before freeing the data structures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Finetune iSCSI connection reset.Eddie Wai1-5/+16
For bnx2 devices, always send notification to bnx2i to let it initiate the cleanup when RST is received. For bnx2x devices, add unsolicited RST_COMP handling to start the cleanup. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Finetune iSCSI connection set up.Eddie Wai2-2/+17
Initialize IP ID and handle some additional connection errors. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ixgbe: Do not allocate too many netdev txqueuesJohn Fastabend1-1/+13
Instead of allocating 128 struct netdev_queue per device, use the minimum value between 128 and the number of possible txq's, to reduce ram usage and "tc -s -d class shod dev .." output. This patch fixes Eric Dumazet's patch to set the TX queues to the correct minimum. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ixgbe: do not stop tx queues in ixgbe_set_tsoJohn Fastabend1-2/+0
Disabling TSO can cause the dev_watchdog timer to be triggered because when TSO is disabled netif_tx_stop_all_queues is called. If the watchdog timer fires while the queues are stopped and traffic has not recently been sent on a paticular queue this is falsly identified as a hang and ndo_tx_timeout() is called. This is ocossionally seen during testing. This removes the netif_tx_stop_all_queues() it is not needed. The scheduler submits skb's with dev_hard_start_xmit(), this checks if netif_needs_gso and if so it calls dev_gso_segment. Disabling TSO will cause dev_hard_start_xmit() to do the gso processing. However ixgbe does not use the features flags to determine if it needs to use tso or not instead it uses skb->gso_size so ixgbe will process these frames correctly regardless of the netdev features flag. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ixgbe: Fix DMA mapping/unmapping issues when HWRSC is enabled on IOMMU ↵Mallikarjuna R Chilakala1-3/+29
enabled kernels Work around 82599 HW issue when HWRSC is enabled on IOMMU enabled kernels. 82599 HW is updating the header information after setting the descriptor to done, resulting DMA mapping/unmapping issues on IOMMU enabled systems. To work around the issue delay unmapping of first packet that carries the header information until end of packet is reached. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 08:40:00 +0300