| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit e6d701dca9893990d999fd145e3e07223c002b06 upstream.
When running a kernel with Clang's Control Flow Integrity implemented,
there is a violation that happens when accessing
/sys/firmware/acpi/pm_profile:
$ cat /sys/firmware/acpi/pm_profile
0
$ dmesg
...
[ 17.352564] ------------[ cut here ]------------
[ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8):
[ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40
[ 17.352573] Modules linked in:
[ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1
[ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40
[ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff
[ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246
[ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8
[ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c
[ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200
[ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00
[ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328
[ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000
[ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0
[ 17.352584] Call Trace:
[ 17.352586] ? rev_id_show+0x8/0x8
[ 17.352587] ? __cfi_check+0x45bac/0x4b640
[ 17.352589] ? kobj_attr_show+0x73/0x80
[ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140
[ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8
[ 17.352593] ? seq_read+0x180/0x600
[ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10
[ 17.352596] ? tlbflush_read_file+0x8/0x8
[ 17.352597] ? __vfs_read+0x6b/0x220
[ 17.352598] ? handle_mm_fault+0xa23/0x11b0
[ 17.352599] ? vfs_read+0xa2/0x130
[ 17.352599] ? ksys_read+0x6a/0xd0
[ 17.352601] ? __do_sys_getpgrp+0x8/0x8
[ 17.352602] ? do_syscall_64+0x72/0x120
[ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 17.352604] ---[ end trace 7b1fa81dc897e419 ]---
When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called,
which in turn calls kobj_attr_show, which gets the ->show callback
member by calling container_of on attr (casting it to struct
kobj_attribute) then calls it.
There is a CFI violation because pm_profile_attr is of type
struct device_attribute but kobj_attr_show calls ->show expecting it
to be from struct kobj_attribute. CFI checking ensures that function
pointer types match when doing indirect calls. Fix pm_profile_attr to
be defined in terms of kobj_attribute so there is no violation or
mismatch.
Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace")
Link: https://github.com/ClangBuiltLinux/linux/issues/1051
Reported-by: yuu ichii <byahu140@heisei.be>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 543094e19c82b5d171e139d09a1a3ea0a7361117 ]
It is possible that a platform that is capable of 'namespace labels'
comes up without the labels properly initialized. In this case, the
region's 'align' attribute is hidden. Howerver, once the user does
initialize he labels, the 'align' attribute still stays hidden, which is
unexpected.
The sysfs_update_group() API is meant to address this, and could be
called during region probe, but it has entanglements with the device
'lockdep_mutex'. Therefore, simply make the 'align' attribute always
visible. It doesn't matter what it says for label-less namespaces, since
it is not possible to change their allocation anyway.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 782b6b69847f34dda330530493ea62b7de3fd06a ]
Use noirq suspend/resume callbacks as other drivers which implement
noirq suspend/resume callbacks (Ex:- PCIe) depend on pinctrl driver to
configure the signals used by their respective devices in the noirq phase.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200604174935.26560-1-vidyas@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e50311556c9f409a85740e3cb4c4511e7e27da0 ]
Fix the following warnings caused by reusage of the same irq_chip
instance for all spmi-gpio gpio_irq_chip instances. Instead embed
irq_chip into pmic_gpio_state struct.
gpio gpiochip2: (c440000.qcom,spmi:pmic@2:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip3: (c440000.qcom,spmi:pmic@4:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip4: (c440000.qcom,spmi:pmic@a:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200604002817.667160-1-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e89df5c4322c1bf495f62d74745895b5fd2a4393 ]
There is a race condition exist during termination. The path is
alx_stop and then alx_remove. An alx_schedule_link_check could be called
before alx_stop by interrupt handler and invoke alx_link_check later.
Alx_stop frees the napis, and alx_remove cancels any pending works.
If any of the work is scheduled before termination and invoked before
alx_remove, a null-ptr-deref occurs because both expect alx->napis[i].
This patch fix the race condition by moving cancel_work_sync functions
before alx_free_napis inside alx_stop. Because interrupt handler can call
alx_schedule_link_check again, alx_free_irq is moved before
cancel_work_sync calls too.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dff515a3e71dc8ab3b9dcc2e23a9b5fca88b3c18 ]
The VNIC driver's "login" command sequence is the final step
in the driver's initialization process with device firmware,
confirming the available device queue resources to be utilized
by the driver. Under high system load, firmware may not respond
to the request in a timely manner or may abort the request. In
such cases, the driver should reattempt the login command
sequence. In case of a device error, the number of retries
is bounded.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95459261c99f1621d90bc628c2a48e60b7cf9a88 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dcacbc1242c71e18fa9d2eadc5647e115c9c627d ]
It's possible for a block driver to set logical block size to
a value greater than page size incorrectly; e.g. bcache takes
the value from the superblock, set by the user w/ make-bcache.
This causes a BUG/NULL pointer dereference in the path:
__blkdev_get()
-> set_init_blocksize() // set i_blkbits based on ...
-> bdev_logical_block_size()
-> queue_logical_block_size() // ... this value
-> bdev_disk_changed()
...
-> blkdev_readpage()
-> block_read_full_page()
-> create_page_buffers() // size = 1 << i_blkbits
-> create_empty_buffers() // give size/take pointer
-> alloc_page_buffers() // return NULL
.. BUG!
Because alloc_page_buffers() is called with size > PAGE_SIZE,
thus it initializes head = NULL, skips the loop, return head;
then create_empty_buffers() gets (and uses) the NULL pointer.
This has been around longer than commit ad6bf88a6c19 ("block:
fix an integer overflow in logical block size"); however, it
increased the range of values that can trigger the issue.
Previously only 8k/16k/32k (on x86/4k page size) would do it,
as greater values overflow unsigned short to zero, and queue_
logical_block_size() would then use the default of 512.
Now the range with unsigned int is much larger, and users w/
the 512k value, which happened to be zero'ed previously and
work fine, started to hit this issue -- as the zero is gone,
and queue_logical_block_size() does return 512k (>PAGE_SIZE.)
Fix this by checking the bcache device's logical block size,
and if it's greater than page size, fallback to the backing/
cached device's logical page size.
This doesn't affect cache devices as those are still checked
for block/page size in read_super(); only the backing/cached
devices are not.
Apparently it's a regression from commit 2903381fce71 ("bcache:
Take data offset from the bdev superblock."), moving the check
into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks
of backing devices out there with this larger value, we cannot
refuse to load them (i.e., have a similar check in _BDEV.)
Ideally perhaps bcache should use all values from the backing
device (physical/logical/io_min block size)? But for now just
fix the problematic case.
Test-case:
# IMG=/root/disk.img
# dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G
# DEV=$(losetup --find --show $IMG)
# make-bcache --bdev $DEV --block 8k
< see dmesg >
Before:
# uname -r
5.7.0-rc7
[ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4
...
[ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100
...
[ 55.966434] Call Trace:
[ 55.967021] create_page_buffers+0x48/0x50
[ 55.967834] block_read_full_page+0x49/0x380
[ 55.972181] do_read_cache_page+0x494/0x610
[ 55.974780] read_part_sector+0x2d/0xaa
[ 55.975558] read_lba+0x10e/0x1e0
[ 55.977904] efi_partition+0x120/0x5a6
[ 55.980227] blk_add_partitions+0x161/0x390
[ 55.982177] bdev_disk_changed+0x61/0xd0
[ 55.982961] __blkdev_get+0x350/0x490
[ 55.983715] __device_add_disk+0x318/0x480
[ 55.984539] bch_cached_dev_run+0xc5/0x270
[ 55.986010] register_bcache.cold+0x122/0x179
[ 55.987628] kernfs_fop_write+0xbc/0x1a0
[ 55.988416] vfs_write+0xb1/0x1a0
[ 55.989134] ksys_write+0x5a/0xd0
[ 55.989825] do_syscall_64+0x43/0x140
[ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 55.991519] RIP: 0033:0x7f7d60ba3154
...
After:
# uname -r
5.7.0.bcachelbspgsz
[ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512)
[ 31.675133] bcache: register_bdev() registered backing device loop0
# grep ^ /sys/block/bcache0/queue/*_block_size
/sys/block/bcache0/queue/logical_block_size:512
/sys/block/bcache0/queue/physical_block_size:8192
Reported-by: Ryan Finnie <ryan@finnie.org>
Reported-by: Sebastian Marsching <sebastian@marsching.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43a562774fceba867e8eebba977d7d42f8a2eac7 ]
Use kfree() instead of kvfree() to free rgb_user in
calculate_user_regamma_ramp() because the memory is allocated with
kcalloc().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
ata_scsi_mode_select_xlat function
[ Upstream commit f650ef61e040bcb175dd8762164b00a5d627f20e ]
BUG: KASAN: use-after-free in ata_scsi_mode_select_xlat+0x10bd/0x10f0
drivers/ata/libata-scsi.c:4045
Read of size 1 at addr ffff88803b8cd003 by task syz-executor.6/12621
CPU: 1 PID: 12621 Comm: syz-executor.6 Not tainted 4.19.95 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xac/0xee lib/dump_stack.c:118
print_address_description+0x60/0x223 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report mm/kasan/report.c:409 [inline]
kasan_report.cold+0xae/0x2d8 mm/kasan/report.c:393
ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045
ata_scsi_translate+0x2da/0x680 drivers/ata/libata-scsi.c:2035
__ata_scsi_queuecmd drivers/ata/libata-scsi.c:4360 [inline]
ata_scsi_queuecmd+0x2e4/0x790 drivers/ata/libata-scsi.c:4409
scsi_dispatch_cmd+0x2ee/0x6c0 drivers/scsi/scsi_lib.c:1867
scsi_queue_rq+0xfd7/0x1990 drivers/scsi/scsi_lib.c:2170
blk_mq_dispatch_rq_list+0x1e1/0x19a0 block/blk-mq.c:1186
blk_mq_do_dispatch_sched+0x147/0x3d0 block/blk-mq-sched.c:108
blk_mq_sched_dispatch_requests+0x427/0x680 block/blk-mq-sched.c:204
__blk_mq_run_hw_queue+0xbc/0x200 block/blk-mq.c:1308
__blk_mq_delay_run_hw_queue+0x3c0/0x460 block/blk-mq.c:1376
blk_mq_run_hw_queue+0x152/0x310 block/blk-mq.c:1413
blk_mq_sched_insert_request+0x337/0x6c0 block/blk-mq-sched.c:397
blk_execute_rq_nowait+0x124/0x320 block/blk-exec.c:64
blk_execute_rq+0xc5/0x112 block/blk-exec.c:101
sg_scsi_ioctl+0x3b0/0x6a0 block/scsi_ioctl.c:507
sg_ioctl+0xd37/0x23f0 drivers/scsi/sg.c:1106
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:501 [inline]
do_vfs_ioctl+0xae6/0x1030 fs/ioctl.c:688
ksys_ioctl+0x76/0xa0 fs/ioctl.c:705
__do_sys_ioctl fs/ioctl.c:712 [inline]
__se_sys_ioctl fs/ioctl.c:710 [inline]
__x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:710
do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c479
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89
f7 48
89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f
83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fb0e9602c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fb0e96036d4 RCX: 000000000045c479
RDX: 0000000020000040 RSI: 0000000000000001 RDI: 0000000000000003
RBP: 000000000076bfc0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000046d R14: 00000000004c6e1a R15: 000000000076bfcc
Allocated by task 12577:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc mm/kasan/kasan.c:553 [inline]
kasan_kmalloc+0xbf/0xe0 mm/kasan/kasan.c:531
__kmalloc+0xf3/0x1e0 mm/slub.c:3749
kmalloc include/linux/slab.h:520 [inline]
load_elf_phdrs+0x118/0x1b0 fs/binfmt_elf.c:441
load_elf_binary+0x2de/0x4610 fs/binfmt_elf.c:737
search_binary_handler fs/exec.c:1654 [inline]
search_binary_handler+0x15c/0x4e0 fs/exec.c:1632
exec_binprm fs/exec.c:1696 [inline]
__do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820
do_execveat_common fs/exec.c:1866 [inline]
do_execve fs/exec.c:1883 [inline]
__do_sys_execve fs/exec.c:1964 [inline]
__se_sys_execve fs/exec.c:1959 [inline]
__x64_sys_execve+0x8a/0xb0 fs/exec.c:1959
do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 12577:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x129/0x170 mm/kasan/kasan.c:521
slab_free_hook mm/slub.c:1370 [inline]
slab_free_freelist_hook mm/slub.c:1397 [inline]
slab_free mm/slub.c:2952 [inline]
kfree+0x8b/0x1a0 mm/slub.c:3904
load_elf_binary+0x1be7/0x4610 fs/binfmt_elf.c:1118
search_binary_handler fs/exec.c:1654 [inline]
search_binary_handler+0x15c/0x4e0 fs/exec.c:1632
exec_binprm fs/exec.c:1696 [inline]
__do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820
do_execveat_common fs/exec.c:1866 [inline]
do_execve fs/exec.c:1883 [inline]
__do_sys_execve fs/exec.c:1964 [inline]
__se_sys_execve fs/exec.c:1959 [inline]
__x64_sys_execve+0x8a/0xb0 fs/exec.c:1959
do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88803b8ccf00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 259 bytes inside of
512-byte region [ffff88803b8ccf00, ffff88803b8cd100)
The buggy address belongs to the page:
page:ffffea0000ee3300 count:1 mapcount:0 mapping:ffff88806cc03080
index:0xffff88803b8cc780 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 ffffea0001104080 0000000200000002 ffff88806cc03080
raw: ffff88803b8cc780 00000000800c000b 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88803b8ccf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88803b8ccf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88803b8cd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88803b8cd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88803b8cd100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
You can refer to "https://www.lkml.org/lkml/2019/1/17/474" reproduce
this error.
The exception code is "bd_len = p[3];", "p" value is ffff88803b8cd000
which belongs to the cache kmalloc-512 of size 512. The "page_address(sg_page(scsi_sglist(scmd)))"
maybe from sg_scsi_ioctl function "buffer" which allocated by kzalloc, so "buffer"
may not page aligned.
This also looks completely buggy on highmem systems and really needs to use a
kmap_atomic. --Christoph Hellwig
To address above bugs, Paolo Bonzini advise to simpler to just make a char array
of size CACHE_MPAGE_LEN+8+8+4-2(or just 64 to make it easy), use sg_copy_to_buffer
to copy from the sglist into the buffer, and workthere.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eea1238867205b9e48a67c1a63219529a73c46fd ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40e05200593af06633f64ab0effff052eee6f076 ]
If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of
them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued
on some random device to return an arbitrary value in the first
byte (and nothing else). When this happens, i2c_smbus_xfer_emulated()
will happily write past the end of the supplied data buffer, thus
causing Bad Things to happen. To prevent this, check the size
before copying the data block and return an error if it is too large.
Fixes: 209d27c3b167 ("i2c: Emulate SMBus block read over I2C")
Signed-off-by: Mans Rullgard <mans@mansr.com>
[wsa: use better errno]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 045790b7bc66a75070c112a61558c639cef2263e ]
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands. In this case, too, the non-gro path didn't bother checking
the return value. Plus, this had some clunky debugging functions that
duplicated code from elsewhere and was generally pretty messy. So, this
commit cleans that all up too.
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5e7d8052f6140985c03bd49ebaa0af9c2944bc6 ]
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df08126e3833e9dca19e2407db5f5860a7c194fb ]
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33fdef24c9ac20c68b71b363e423fbf9ad2bfc1e ]
DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.
Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 502035e284cc7e9efef22b01771d822d49698ab9 ]
The port number field in the status register was not correct, so fix it.
Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0a5fdf4cc83dabcdea668f971b8a2e916437711 ]
The (struct __prci_data).hw_clks.hws is an array with dynamic elements.
Using struct_size(pd, hw_clks.hws, ARRAY_SIZE(__prci_init_clocks))
instead of sizeof(*pd) to get the correct memory size of
struct __prci_data for sifive/fu540-prci. After applying this
modifications, the kernel runs smoothly with CONFIG_SLAB_FREELIST_RANDOM
enabled on the HiFive unleashed board.
Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20d1f2d1b024f6be199a3bedf1578a1d21592bc5 ]
When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).
The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.
Since the original reason for the padding was corrected by
commit 7dd399130efb ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.
Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a51243860893615b457b149da1ef5df0a4f1ffc2 ]
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum
enum dbg_status however there is a missing corresponding entry for
this in the array s_status_str. This causes an out-of-bounds read when
indexing into the last entry of s_status_str. Fix this by adding in
the missing entry.
Addresses-Coverity: ("Out-of-bounds read").
Fixes: 2d22bc8354b1 ("qed: FW 8.42.2.0 debug features")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e164471dcf19308d154adb69e7760d8ba426a77f ]
Right now ns->head->lock is protecting namespace mutation
which is wrong and unneeded. Move it to only protect
against head mutations. While we're at it, remove unnecessary
ns->head reference as we already have head pointer.
The problem with this is that the head->lock spans
mpath disk node I/O that may block under some conditions (if
for example the controller is disconnecting or the path
became inaccessible), The locking scheme does not allow any
other path to enable itself, preventing blocked I/O to complete
and forward-progress from there.
This is a preparation patch for the fix in a subsequent patch
where the disk I/O will also be done outside the head->lock.
Fixes: 0d0b660f214d ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea0efd687b01355cd799c8643d0c636ba4859ffc ]
This driver assumed that dmaengine_tx_status() could return
the residue even if the transfer was completed. However,
this was not correct usage [1] and this caused to break getting
the residue after the commit 24461d9792c2 ("dmaengine:
virt-dma: Fix access after free in vchan_complete()") actually.
So, this is possible to get wrong received size if the usb
controller gets a short packet. For example, g_zero driver
causes "bad OUT byte" errors.
The usb-dmac driver will support the callback_result, so this
driver can use it to get residue correctly. Note that even if
the usb-dmac driver has not supported the callback_result yet,
this patch doesn't cause any side-effects.
[1]
https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1592482277-19563-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e55f3c37cb8d31c7e301f46396b2ac6a19eb3a7c ]
If this is in "transceiver" mode the the ->qwork isn't required and is
a NULL pointer. This can lead to a NULL dereference when we call
destroy_workqueue(udc->qwork).
Fixes: 3517c31a8ece ("usb: gadget: mv_udc: use devm_xxx for probe")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46da547e21d6cefceec3fb3dba5ebbca056627fc ]
Commit cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with
general hdw_queues per cpu") has introduced static checker warnings for
potential null dereferences in 'lpfc_sli4_hba_unset()' and commit 1ffdd2c0440d
("scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset") has
tried to fix it. However, yet another potential null dereference is
remaining. This commit fixes it.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Link: https://lore.kernel.org/r/20200623084122.30633-1-sjpark@amazon.com
Fixes: 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning inlpfc_sli4_hba_unset")
Fixes: cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 030c98824deaba205787af501a074b3d7f46e32e ]
Check for whether PTP is enabled or not at the caller and perform
locking/unlocking at the caller.
Fixes following sparse warning:
sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' -
different lock contexts for basic block
Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11d8cd5c9f3b46f397f889cefdb66795518aaebd ]
Move code handling L2T ARP failures to the only caller.
Fixes following sparse warning:
skbuff.h:2091:29: warning: context imbalance in
'handle_failed_resolution' - unexpected unlock
Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c221dd1831732449f844e03631a34fd21c2b9429 ]
Sizes of all ILT blocks must be reset before ILT recomputing when
disabling clients, or memory allocation may exceed ILT shadow array
and provoke system crashes.
Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec6c80590bde6b5dfa4970fffa3572f1acd313ca ]
Set edev->cdev pointer to NULL after calling remove() callback to avoid
using of already freed object.
Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c85f394c2206ea3835f43534d5675f0574e1b70 ]
Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.
Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d434d02f7e7c24c721365fd594ed781acb18e0da ]
This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.
Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccd7c7ce167a21dbf2b698ffcf00f11d96d44f9b ]
25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.
Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.
Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.
Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4079c7f7a2a00ab403c177ce723b560de59139c3 ]
Set rdma_wq pointer to NULL after destroying the workqueue and check
for it when adding new events to fix crashes on driver unload.
Fixes: cee9fbd8e2e9 ("qede: Add qedr framework")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31333c1a2521ff4b4ceb0c29de492549cd4a8de3 ]
qed_spq_unregister_async_cb() should be called before
qed_rdma_info_free() to avoid crash-spawning uses-after-free.
Instead of calling it from each subsystem exit code, do it in one place
on PF down.
Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c95c9693b112f312b59c5d100fd09a1349970fab ]
Correct i.MX8MP UID fuse offset according to fuse map:
UID_LOW: 0x420
UID_HIGH: 0x430
Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver")
Fixes: 18f662a73862 ("soc: imx: Add i.MX8MP SoC driver support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04c00956ee3cd138fd38560a91452a804a8c5550 ]
The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.
Fixes: 765b6a98c1de3 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50310600ebda74b9988467e2e6128711c7ba56fc ]
PCI ACS is disabled if Intel IOMMU is off by default or intel_iommu=off
is used in command line. Unfortunately, Intel IOMMU will be forced on if
there're devices sitting on an external facing PCI port that is marked
as untrusted (for example, thunderbolt peripherals). That means, PCI ACS
is disabled while Intel IOMMU is forced on to isolate those devices. As
the result, the devices of an MFD will be grouped by a single group even
the ACS is supported on device.
[ 0.691263] pci 0000:00:07.1: Adding to iommu group 3
[ 0.691277] pci 0000:00:07.2: Adding to iommu group 3
[ 0.691292] pci 0000:00:07.3: Adding to iommu group 3
Fix it by requesting PCI ACS when Intel IOMMU is detected with platform
opt in hint.
Fixes: 89a6079df791a ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Co-developed-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16ecf10e815d70d11d2300243f4a3b4c7c5acac7 ]
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b59eabd23ee53e8c3492602722e1697f9a2f63ad ]
Even with moving netif_tx_disable() to an earlier point when
taking down the queues for a reconfiguration, we still end
up with the occasional netdev watchdog Tx Timeout complaint.
The old method of using netif_trans_update() works fine for
queue 0, but has no effect on the remaining queues. Using
netif_device_detach() allows us to signal to the watchdog to
ignore us for the moment.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a17f4bed811c60712d8131883cdba11a105d0161 ]
If ib_dma_mapping_error() returns non-zero value,
ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM
without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv
in this case.
Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors")
Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com
Signed-off-by: Fan Guo <guofan5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2dfcfba00ba4a414617ef4c5a8501fe21567eb3 ]
Current(?) OSA devices also store their cmd-specific return codes for
SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code.
So once we added stricter checking for the top-level field a while ago,
none of the error logic that rolls back the user's configuration to its
old state is applied any longer.
For this specific cmd, go back to the old model where we peek into the
cmd structure even though the top-level field indicated an error.
Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4121fb0db68ed4de574f9bdc630b75fcc99b4835 ]
In disassociate flow, the type_attrs is set to be NULL, which is in an
implicit way is checked in alloc_uobj() by "if (!attrs->context)".
Change the logic to rely on that check, to be consistent with other
alloc_uobj() places that will fix the following kernel splat.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 2743 Comm: python3 Not tainted 5.7.0-rc6-for-upstream-perf-2020-05-23_19-04-38-5 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:alloc_begin_fd_uobject+0x18/0xf0 [ib_uverbs]
Code: 89 43 48 eb 97 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 1f <48> 8b 43 18 48 8b 80 80 00 00 00 48 3d 20 10 33 a0 74 1c 48 3d 30
RSP: 0018:ffffc90001127b70 EFLAGS: 00010282
RAX: ffffffffa0339fe0 RBX: 0000000000000000 RCX: 8000000000000007
RDX: fffffffffffffffb RSI: ffffc90001127d28 RDI: ffff88843fe1f600
RBP: ffff88843fe1f600 R08: ffff888461eb06d8 R09: ffff888461eb06f8
R10: ffff888461eb0700 R11: 0000000000000000 R12: ffff88846a5f6450
R13: ffffc90001127d28 R14: ffff88845d7d6ea0 R15: ffffc90001127cb8
FS: 00007f469bff1540(0000) GS:ffff88846f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000450018003 CR4: 0000000000760ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? xa_store+0x28/0x40
rdma_alloc_begin_uobject+0x4f/0x90 [ib_uverbs]
ib_uverbs_create_comp_channel+0x87/0xf0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs]
ib_uverbs_cmd_verbs.isra.8+0x96d/0xae0 [ib_uverbs]
? get_page_from_freelist+0x3bb/0xf70
? _copy_to_user+0x22/0x30
? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs]
? __wake_up_common_lock+0x87/0xc0
ib_uverbs_ioctl+0xbc/0x130 [ib_uverbs]
ksys_ioctl+0x83/0xc0
? ksys_write+0x55/0xd0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x48/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f469ac43267
Fixes: 849e149063bd ("RDMA/core: Do not allow alloc_commit to fail")
Link: https://lore.kernel.org/r/20200617061826.2625359-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 730c8912484186d4623d0c76509066d285c3a755 ]
The bind_list and listen_list must be accessed under a lock, add the
missing locking around the access in cm_ib_id_from_event()
In addition add lockdep asserts to make it clearer what the locking
semantic is here.
general protection fault: 0000 [#1] SMP NOPTI
CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15
Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020
Workqueue: ib_cm cm_work_handler [ib_cm]
task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000
RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm]
RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286
RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000
RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08
RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900
R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30
R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688
FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0
Call Trace:
? rdma_addr_cancel+0xa0/0xa0 [ib_core]
? cm_process_work+0x28/0x140 [ib_cm]
cm_process_work+0x28/0x140 [ib_cm]
? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm]
cm_work_handler+0xa06/0x1a6f [ib_cm]
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to+0x7c/0x4b0
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
process_one_work+0x1da/0x400
worker_thread+0x2b/0x3f0
? process_one_work+0x400/0x400
kthread+0x118/0x140
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x22/0x40
Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01
00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28
Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM")
Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0dfbd5ecf28cbcb81674c49d34ee97366db1be44 ]
Private data passed to iwarp_cm_handler is copied for connection request /
response, but ignored otherwise. If junk is passed, it is stored in the
event and used later in the event processing.
The driver passes an old junk pointer during connection close which leads
to a use-after-free on event processing. Set private data to NULL for
events that don 't have private data.
BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm]
kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250
kernel:
kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm]
kernel: Call Trace:
kernel: dump_stack+0x8c/0xc0
kernel: print_address_description.constprop.0+0x1b/0x210
kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
kernel: __kasan_report.cold+0x1a/0x33
kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
kernel: kasan_report+0xe/0x20
kernel: check_memory_region+0x130/0x1a0
kernel: memcpy+0x20/0x50
kernel: ucma_event_handler+0x532/0x560 [rdma_ucm]
kernel: ? __rpc_execute+0x608/0x620 [sunrpc]
kernel: cma_iw_handler+0x212/0x330 [rdma_cm]
kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm]
kernel: ? enqueue_timer+0x86/0x140
kernel: ? _raw_write_lock_irq+0xd0/0xd0
kernel: cm_work_handler+0xd3d/0x1070 [iw_cm]
Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions")
Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0133654d8eb8607eacc96badfe49bf992155f4cb ]
The max_pkeys device attribute was not set in query device verb, set it to
one in order to account for the default pkey (0xffff). This information is
exposed to userspace and can cause malfunction
Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20200614103534.88060-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90a239ee25fa3a483facec3de7c144361a3d3a51 ]
In case of failure of alloc_ud_wq_attr(), the memory allocated by
rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the
existing clean-up code.
Fixes: d310c4bf8aea ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs")
Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95b2c3ec4cb1689db2389c251d39f64490ba641c ]
When a register patch is registered the reg_sequence is copied but the
memory allocated is never freed. Add a kfree in regmap_exit to clean it
up.
Fixes: 22f0d90a3482 ("regmap: Support register patch sets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6769b275a313c76ddcd7d94c632032326db5f759 ]
The variable buf_addr is type dma_addr_t, which may not be the same size
as a pointer. To ensure it is the correct size, cast to a uintptr_t.
Fixes: c536277e0db1 ("RDMA/siw: Fix 64/32bit pointer inconsistency")
Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.com
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a88a6227dc7f2e723bba11ece05e57bd8dce8e4 ]
Commit 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") introduced a
regression that made a couple of (badly configured) systems fail to
boot [1]: Until 5.6, we silently accepted Unix-style file separators in
EFI paths, which might violate the EFI standard, but are an easy to make
mistake. This fix restores the pre-5.7 behaviour.
[1] https://bbs.archlinux.org/viewtopic.php?id=256273
Fixes: 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine")
Signed-off-by: Philipp Fent <fent@in.tum.de>
Link: https://lore.kernel.org/r/20200615115109.7823-1-fent@in.tum.de
[ardb: rewrite as chained if/else statements]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ]
PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg
is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on
pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG
and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG
and pfuze100_sw_regulator_ops.
Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a")
Reported-by: Christophe Meynard <Christophe.Meynard@ign.fr>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ddf4739be6e375116c375f0a68bf3893ffcee21 ]
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 0bb549052d33 ("efi: Add esrt support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
