Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit b92103b559c77abc5f8b7bec269230a219c880b7 ]
find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 822cab6150d3002952407a8297ff5a0d32bb7b54 ]
When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9376fa634afc207a3ce99e0957e04948c34d6510 ]
Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is
equivalent to Pro4.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ]
The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Also remove the unnecessary error message as the core already prints the
info.
Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ]
Currently we wait only until the PGC inverts the isolation setting
before disabling the peripheral clocks. This doesn't ensure that the
reset is properly propagated through the peripheral devices in the
power domain.
Wait until the PGC signals that the power up request is done and
wait a bit for resets to propagate before disabling the clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ]
Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents
are osc, osc_div2, osc_div4 and extern clock.
Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4
for PMC clocks.
This patch fixes this.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ]
The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4bd9d5070b92da012f2715cf8e4859acb78b8f35 ]
Ethtool command allow setting of several FEC modes in a single set
command. The driver can only set a single FEC mode at a time. With this
patch driver will reply not-supported on setting several FEC modes.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0ecf1c6c6e82da4847900fad0272abfd014666d ]
clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f21cf9c77ee82ef8adfeb2143adfacf21ec1d5cc ]
We don't check for errors from clk_ops::get_phase() before storing away
the result into the clk_core::phase member. This can lead to some fairly
confusing debugfs information if these ops do return an error. Let's
skip the store when this op fails to fix this. While we're here, move
the locking outside of clk_core_get_phase() to simplify callers from
the debugfs side.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-2-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bbcf69e42fe7fd49b6f4339c970729d0e343753 ]
As we move the ttm_bo_individualize_resv() upwards, we need flush the
copied fence too. Otherwise the driver keeps waiting for fence.
run&Kill kfdtest, then perf top.
25.53% [ttm] [k] ttm_bo_delayed_delete
24.29% [kernel] [k] dma_resv_test_signaled_rcu
19.72% [kernel] [k] ww_mutex_lock
Fix: 378e2d5b("drm/ttm: fix ttm_bo_cleanup_refs_or_queue once more")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/72339/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f11a2cc10a4ae3a70e2c73361f4a9a33503539b ]
If kmsg_dump_register() fails, hv_panic_page will not be used
anywhere. So free and reset it.
Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-3-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 952c48b0ed18919bff7528501e9a3fff8a24f8cd ]
rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(),
including rbd_dev_header_info(), which means that rbd_dev_header_info()
isn't supposed to be called after rbd_dev_unprobe().
However, rbd_dev_image_release() calls rbd_dev_unprobe() before
rbd_unregister_watch(). This is racy because a header update notify
can sneak in:
"rbd unmap" thread ceph-watch-notify worker
rbd_dev_image_release()
rbd_dev_unprobe()
free and zero out header
rbd_watch_cb()
rbd_dev_refresh()
rbd_dev_header_info()
read in header
The same goes for "rbd map" because rbd_dev_image_probe() calls
rbd_dev_unprobe() on errors. In both cases this results in a memory
leak.
Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e4e1de5b63fa423b13593337a27fd2d2b0bcf77 ]
rbd_unregister_watch() flushes notifies and therefore cannot be called
under header_rwsem because a header update notify takes header_rwsem to
synchronize with "rbd map". If mapping an image fails after the watch
is established and a header update notify sneaks in, we deadlock when
erroring out from rbd_dev_image_probe().
Move watch registration and unregistration out of the critical section.
The only reason they were put there was to make header_rwsem management
slightly more obvious.
Fixes: 811c66887746 ("rbd: fix rbd map vs notify races")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f3a99e761efa616028b255b4de58e9b5b87c5545 upstream.
When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 040026df7088c56ccbad28f7042308f67bde63df upstream.
When sysctl_record_panic_msg is not set, the panic will
not be reported to Hyper-V via hyperv_report_panic_msg().
So the crash should be reported via hyperv_report_panic().
Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-6-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 73f26e526f19afb3a06b76b970a76bcac2cafd05 upstream.
When a guest VM panics, Hyper-V should be notified only once via the
crash synthetic MSRs. Current Linux code might write these crash MSRs
twice during a system panic:
1) hyperv_panic/die_event() calling hyperv_report_panic()
2) hv_kmsg_dump() calling hyperv_report_panic_msg()
Fix this by not calling hyperv_report_panic() if a kmsg dump has been
successfully registered. The notification will happen later via
hyperv_report_panic_msg().
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-4-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74347a99e73ae00b8385f1209aaea193c670f901 upstream.
When kdump is not configured, a Hyper-V VM might still respond to
network traffic after a kernel panic when kernel parameter panic=0.
The panic CPU goes into an infinite loop with interrupts enabled,
and the VMbus driver interrupt handler still works because the
VMbus connection is unloaded only in the kdump path. The network
responses make the other end of the connection think the VM is
still functional even though it has panic'ed, which could affect any
failover actions that should be taken.
Fix this by unloading the VMbus connection during the panic process.
vmbus_initiate_unload() could then be called twice (e.g., by
hyperv_panic_event() and hv_crash_handler(), so reset the connection
state in vmbus_initiate_unload() to ensure the unload is done only
once.
Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-2-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream.
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.
target_path was not freed in the non-error path.
Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream.
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.
of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.
Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 216830d2413cc61be3f76bc02ffd905e47d2439e upstream.
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.
of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices). Fix the platform
device reference counts so that the memory will be freed.
Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 upstream.
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.
of_unittest_changeset() reaches deeply into the dynamic devicetree
functions. Several nodes were left with an elevated reference
count and thus were not properly cleaned up. Fix the reference
counts so that the memory will be freed.
Fixes: 201c910bd689 ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edfc23f6f9fdbd7825d50ac1f380243cde19b679 upstream.
Using irq_domain_free_irqs_common() on the irqdomain free path will
leave the MSI descriptor unfreed when platform devices get removed.
Properly free it by MSI domain free function.
Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream.
If the dxfer_len is greater than 256M then the request is invalid and we
need to call sg_remove_request in sg_common_write.
Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com
Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream.
The restart handler is missing two things, first, the registers
has to be unlocked and second there is no synchronization for the
write_relaxed() calls.
This was tested on a custom board with the NXP LS1028A SoC.
Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
session
[ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ]
A number of hangs have been reported against the target driver; they are
due to the fact that multiple threads may try to destroy the iscsi session
at the same time. This may be reproduced for example when a "targetcli
iscsi/iqn.../tpg1 disable" command is executed while a logout operation is
underway.
When this happens, two or more threads may end up sleeping and waiting for
iscsit_close_connection() to execute "complete(session_wait_comp)". Only
one of the threads will wake up and proceed to destroy the session
structure, the remaining threads will hang forever.
Note that if the blocked threads are somehow forced to wake up with
complete_all(), they will try to free the same iscsi session structure
destroyed by the first thread, causing double frees, memory corruptions
etc...
With this patch, the threads that want to destroy the iscsi session will
increase the session refcount and will set the "session_close" flag to 1;
then they wait for the driver to close the remaining active connections.
When the last connection is closed, iscsit_close_connection() will wake up
all the threads and will wait for the session's refcount to reach zero;
when this happens, iscsit_close_connection() will destroy the session
structure because no one is referencing it anymore.
INFO: task targetcli:5971 blocked for more than 120 seconds.
Tainted: P OE 4.15.0-72-generic #81~16.04.1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
targetcli D 0 5971 1 0x00000080
Call Trace:
__schedule+0x3d6/0x8b0
? vprintk_func+0x44/0xe0
schedule+0x36/0x80
schedule_timeout+0x1db/0x370
? __dynamic_pr_debug+0x8a/0xb0
wait_for_completion+0xb4/0x140
? wake_up_q+0x70/0x70
iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod]
iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod]
iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod]
lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod]
configfs_write_file+0xb9/0x120
__vfs_write+0x1b/0x40
vfs_write+0xb8/0x1b0
SyS_write+0x5c/0xe0
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com
Reported-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ]
iscsit_free_session() is equivalent to iscsit_stop_session() followed by a
call to iscsit_close_session().
Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com
Tested-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3688b0db5c331f4ec3fa5eb9f670a4b04f530700 upstream.
The ti_sci_inta_irq_handler() does not take into account INTA IRQs state
(masked/unmasked) as it uses INTA_STATUS_CLEAR_j register to get INTA IRQs
status, which provides raw status value.
This causes hard IRQ handlers to be called or threaded handlers to be
scheduled many times even if corresponding INTA IRQ is masked.
Above, first of all, affects the LEVEL interrupts processing and causes
unexpected behavior up the system stack or crash.
Fix it by using the Interrupt Masked Status INTA_STATUSM_j register which
provides masked INTA IRQs status.
Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20200408191532.31252-1-grygorii.strashko@ti.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d79294d0de12ddd1420110813626d691f440b86f upstream.
We already set DPM_FLAG_SMART_PREPARE, so we completely skip all
callbacks (other then prepare) where possible, quoting from
dw_i2c_plat_prepare():
/*
* If the ACPI companion device object is present for this device, it
* may be accessed during suspend and resume of other devices via I2C
* operation regions, so tell the PM core and middle layers to avoid
* skipping system suspend/resume callbacks for it in that case.
*/
return !has_acpi_companion(dev);
Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend()
to leave the controller runtime-suspended even if dw_i2c_plat_prepare()
returned 0.
Leaving the controller runtime-suspended normally, when the I2C controller
is suspended during the suspend_late phase, is not an issue because
the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it.
But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c
leaves the controller alive until the suspend_noirq phase, because it may
be used by the _PS3 ACPI methods of PCI devices and PCI devices are left
powered on until the suspend_noirq phase.
Between the suspend_late and resume_early phases runtime-pm is disabled.
So for any ACPI I2C OPRegion accesses done after the suspend_late phase,
the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the
controller is left runtime-suspended.
i2c_dw_xfer() has a check to catch this condition (rather then waiting
for the I2C transfer to timeout because the controller is suspended).
acpi_subsys_suspend() leaving the controller runtime-suspended in
combination with an ACPI I2C OPRegion access done after the suspend_late
phase triggers this check, leading to the following error being logged
on a Bay Trail based Lenovo Thinkpad 8 tablet:
[ 93.275882] i2c_designware 80860F41:00: Transfer while suspended
[ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280
...
[ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred
[ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280
...
[ 93.276340] Call Trace:
[ 93.276366] __i2c_transfer+0x121/0x520
[ 93.276379] i2c_transfer+0x4c/0x100
[ 93.276392] i2c_acpi_space_handler+0x219/0x510
[ 93.276408] ? up+0x40/0x60
[ 93.276419] ? i2c_acpi_notify+0x130/0x130
[ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252
...
So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses
to work until the suspend_noirq phase, we need the controller to be
runtime-resumed during the suspend phase if it is runtime-suspended
suspended at that time. This means that we must not set the
DPM_FLAG_SMART_SUSPEND on these platforms.
On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag
to make sure the controller stays functional until the suspend_noirq
phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND
flag when that flag is set.
Cc: stable@vger.kernel.org
Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b2a7e9735ab2864330be9d00d7f38c961c28de5d upstream.
The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.
Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c7f0a44b4b4ef16df8f44fbaee6d1f5d1593c83 upstream.
Should prevent flicker if PP_OVERDRIVE_MASK is set.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628
Signed-off-by: Sergei Lopatin <magist3r@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe867cac9e1967c553e4ac2aece5fc8675258010 ]
mlx5e_ethtool_set_channels updates the indirection table before
switching to the new channels. If the switch fails, the indirection
table is new, but the channels are old, which is wrong. Fix it by using
the preactivate hook of mlx5e_safe_switch_channels to update the
indirection table at the stage when nothing can fail anymore.
As the code that updates the indirection table is now encapsulated into
a new function, use that function in the attach flow when the driver has
to reduce the number of channels, and prepare the code for the next
commit.
Fixes: 85082dba0a ("net/mlx5e: Correctly handle RSS indirection table when changing number of channels")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dca147b3dce5abb5284ff747211960fd2db5ec2e ]
mlx5e_safe_switch_channels accepts a callback to be called before
activating new channels. It is intended to configure some hardware
parameters in cases where channels are recreated because some
configuration has changed.
Recently, this callback has started being used to update the driver's
internal MLX5E_STATE_XDP_OPEN flag, and the following patches also
intend to use this callback for software preparations. This patch
renames the hw_modify callback to preactivate, so that the name fits
better.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2c95271f9f39ea9b34db2301b3b6c5105cdb447 ]
As a preparation for one of the following commits, create a function to
encapsulate the code that notifies the kernel about the new amount of
RX and TX queues. The code will be called multiple times in the next
commit.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7ea862048317aa76d0f22334202779a25530980c upstream.
syzbot reports a warning:
precision 33020 too large
WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471
vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547
kvasprintf+0xb2/0x170 lib/kasprintf.c:22
kasprintf+0xbb/0xf0 lib/kasprintf.c:59
hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
...
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Thus it seems that kasprintf() with "%.*s" format can not be used for
duplicating a string with arbitrary length. Replace it with kstrndup().
Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64,
but the code is simpler this way.
Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com
Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi
[johannes: add note about length limit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a114c4ca64bd522aec1790c7e5c60c882f699d8f upstream.
We track END_TRANSFER command completion. Don't clear transfer
started/ended flag prematurely. Otherwise, we'd run into the problem
with restarting transfer before END_TRANSFER command finishes.
Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d7a83d67a1694c42cc95fc0755d823f7ca3bfcfb upstream.
Use usbs_mask passed as argument. The usbs_mask is different for
SAM9X60.
Fixes: 2423eeaead6f8 ("clk: at91: usb: Add sam9x60 support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-4-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43b203d32b77d1b1b2209e22837f49767020553e upstream.
SAM9X60's USB clock has 3 parents: plla, upll and main_osc.
Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-3-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9cc5f232a4b6a0ef6e9b57876d61b88f61bdd7c2 upstream.
This driver allows pwms to be requested as gpios via gpiolib. Obviously,
it should not be allowed to request a GPIO when its corresponding PWM is
already requested (and vice versa). So it requires some exclusion code.
Given that the PWMm and GPIO cores are not synchronized with respect to
each other, this exclusion code will also require proper
synchronization.
Such a mechanism was in place, but was inadvertently removed by Uwe's
clean-up in commit e926b12c611c ("pwm: Clear chip_data in pwm_put()").
Upon revisiting the synchronization mechanism, we found that
theoretically, it could allow two threads to successfully request
conflicting PWMs/GPIOs.
Replace with a bitmap which tracks PWMs in-use, plus a mutex. As long as
PWM and GPIO's respective request/free functions modify the in-use
bitmap while holding the mutex, proper synchronization will be
guaranteed.
Reported-by: YueHaibing <yuehaibing@huawei.com>
Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.org/lkml/2019/5/31/963
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[cg: Tested on an i.MX6Q board with two NXP PCA9685 chips]
Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> # cg's rebase
Link: https://lore.kernel.org/lkml/20200330160238.GD2817345@ulmo/
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 01091c496f920e634ea84b689f480c39016752a8 upstream.
The 'func' variable can come from the user in the __nd_ioctl(). If it's
too high then the (1 << func) shift in acpi_nfit_clear_to_send() is
undefined. In acpi_nfit_ctl() we pass 'func' to test_bit(func, &dsm_mask)
which could result in an out of bounds access.
To fix these issues, I introduced the NVDIMM_CMD_MAX (31) define and
updated nfit_dsm_revid() to use that define as well instead of magic
numbers.
Fixes: 11189c1089da ("acpi/nfit: Fix command-supported detection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20200225161927.hvftuq7kjn547fyj@kili.mountain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f775ac78fcfc6bdc96bdda07029d11f2a5e84869 upstream.
Host event can be sent by remoteproc by any time, and
cros_ec_rpmsg_callback would be called after cros_ec_rpmsg_create_ept.
But the cros_ec_device is initialized after that, which cause host event
handler to use cros_ec_device that are not initialized properly yet.
Fix this by don't schedule host event handler before cros_ec_register
returns. Instead, remember that we have a pending host event, and
schedule host event handler after cros_ec_register.
Fixes: 71cddb7097e2 ("platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed.")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c63d6099a7959ecc919b2549dc6b71f53521f819 upstream.
The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.
Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ce7a61a0d57d2dd613941d8aef82a5b54fb2e396 which is
commit 65a691f5f8f0bb63d6a82eec7b0ffd193d8d8a5f upstream.
Rafael writes:
It has not been marked for -stable or otherwise requested to be
included AFAICS. Also it depends on other mainline commits that
have not been included into 5.6.5.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 806fd188ce2a4f8b587e83e73c478e6484fbfa55 ]
After commit bfcb813203e619a8960a819bf533ad2a108d8105 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.
Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.
Fixes: eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7482d9cb5b974b7ad1a58fa8714f7a8c05b5d278 ]
Cited patch missed to extract PCI pf number accurately for PF and VF
port flavour. It considered PCI device + function number.
Due to this, device having non zero device number shown large pfnum.
Hence, use only PCI function number; to avoid similar errors, derive
pfnum one time for all port flavours.
Fixes: f60f315d339e ("net/mlx5e: Register devlink ports for physical link, PCI PF, VFs")
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 70f478ca085deec4d6c1f187f773f5827ddce7e8 ]
Current value of nest_level, assigned from net_device lower_level value,
does not reflect the actual number of vlan headers, needed to pop.
For ex., if we have untagged ingress traffic sended over vlan devices,
instead of one pop action, driver will perform two pop actions.
To fix that, calculate nest_level as difference between vlan device and
parent device lower_levels.
Fixes: f3b0a18bb6cb ("net: remove unnecessary variables and callback")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d19987ccf57501894fdd8fadc2e55e4a3dd57239 ]
Once driver finishes flashing the firmware image, it should release it.
Fixes: 9c8bca2637b8 ("mlx5: Move firmware flash implementation to devlink")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8c702a53bb0a79bfa203ba21ef1caba43673c5b7 ]
High frequency of PCI ioread calls during recovery flow may cause the
following trace on powerpc:
[ 248.670288] EEH: 2100000 reads ignored for recovering device at
location=Slot1 driver=mlx5_core pci addr=0000:01:00.1
[ 248.670331] EEH: Might be infinite loop in mlx5_core driver
[ 248.670361] CPU: 2 PID: 35247 Comm: kworker/u192:11 Kdump: loaded
Tainted: G OE ------------ 4.14.0-115.14.1.el7a.ppc64le #1
[ 248.670425] Workqueue: mlx5_health0000:01:00.1 health_recover_work
[mlx5_core]
[ 248.670471] Call Trace:
[ 248.670492] [c00020391c11b960] [c000000000c217ac] dump_stack+0xb0/0xf4
(unreliable)
[ 248.670548] [c00020391c11b9a0] [c000000000045818]
eeh_check_failure+0x5c8/0x630
[ 248.670631] [c00020391c11ba50] [c00000000068fce4]
ioread32be+0x114/0x1c0
[ 248.670692] [c00020391c11bac0] [c00800000dd8b400]
mlx5_error_sw_reset+0x160/0x510 [mlx5_core]
[ 248.670752] [c00020391c11bb60] [c00800000dd75824]
mlx5_disable_device+0x34/0x1d0 [mlx5_core]
[ 248.670822] [c00020391c11bbe0] [c00800000dd8affc]
health_recover_work+0x11c/0x3c0 [mlx5_core]
[ 248.670891] [c00020391c11bc80] [c000000000164fcc]
process_one_work+0x1bc/0x5f0
[ 248.670955] [c00020391c11bd20] [c000000000167f8c]
worker_thread+0xac/0x6b0
[ 248.671015] [c00020391c11bdc0] [c000000000171618] kthread+0x168/0x1b0
[ 248.671067] [c00020391c11be30] [c00000000000b65c]
ret_from_kernel_thread+0x5c/0x80
Reduce the PCI ioread frequency during recovery by using msleep()
instead of cond_resched()
Fixes: 3e5b72ac2f29 ("net/mlx5: Issue SW reset on FW assert")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a5d75538295b06bc6ade1b9da07b9bee57d1c677 ]
Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 84d2f7b708c374a15a2abe092a74e0e47d018286 ]
Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.
Fixes: ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API")
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|