summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-08-21watchdog: wdt285: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: footbridge_defconfig arm): drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’: drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] watchdog_ping(); ^~~~~~~~~~~~~~~ drivers/watchdog/wdt285.c:172:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-21mtd: sa1100: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: assabet_defconfig arm): drivers/mtd/maps/sa1100-flash.c: In function ‘sa1100_probe_subdev’: drivers/mtd/maps/sa1100-flash.c:82:3: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_WARNING "SA1100 flash: unknown base address " ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "0x%08lx, assuming CS0\n", phys); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/maps/sa1100-flash.c:85:2: note: here case SA1100_CS0_PHYS: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-21drm/sun4i: tcon: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: sunxi_defconfig arm): drivers/gpu/drm/sun4i/sun4i_tcon.c: In function ‘sun4i_tcon0_mode_set_dithering’: drivers/gpu/drm/sun4i/sun4i_tcon.c:318:7: warning: this statement may fall through [-Wimplicit-fallthrough=] val |= SUN4I_TCON0_FRM_CTL_MODE_B; drivers/gpu/drm/sun4i/sun4i_tcon.c:319:2: note: here case MEDIA_BUS_FMT_RGB666_1X18: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-21drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: multi_v7_defconfig arm): drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function ‘sun6i_dsi_transfer’: drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:993:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (msg->rx_len == 1) { ^ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:998:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-21dmaengine: fsldma: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: powerpc-ppa8548_defconfig powerpc): drivers/dma/fsldma.c: In function ‘fsl_dma_chan_probe’: drivers/dma/fsldma.c:1165:26: warning: this statement may fall through [-Wimplicit-fallthrough=] chan->toggle_ext_pause = fsl_chan_toggle_ext_pause; ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/dma/fsldma.c:1166:2: note: here case FSL_DMA_IP_83XX: ^~~~ Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-21dma-direct: fix zone selection after an unaddressable CMA allocationChristoph Hellwig1-0/+3
The new dma_alloc_contiguous hides if we allocate CMA or regular pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA allocation succeeds but isn't addressable. That means we either fail outright or dip into a small zone that might not succeed either. Thanks to Hillf Danton for debugging this issue. Fixes: b1d2dc009dec ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
2019-08-20Merge branch 'for-linus' of ↵Linus Torvalds5-26/+13
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - a few regression fixes for wacom driver (including fix for my earlier mismerge) from Aaron Armstrong Skomra and Jason Gerecke - revert of a few Logitech device ID additions which turn out to not work perfectly with the hidpp driver at the moment; proper support is now scheduled for 5.4. Fixes from Benjamin Tissoires - scheduling-in-atomic fix for cp2112 driver, from Benjamin Tissoires - new device ID to intel-ish, from Even Xu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: correct misreported EKR ring values HID: cp2112: prevent sleeping function called from invalid context HID: intel-ish-hid: ipc: add EHL device id HID: wacom: Correct distance scale for 2nd-gen Intuos devices HID: logitech-hidpp: remove support for the G700 over USB Revert "HID: logitech-hidpp: add USB PID for a few more supported mice" HID: wacom: add back changes dropped in merge commit
2019-08-20infiniband: hfi1: fix memory leaksWenwen Wang1-3/+6
In fault_opcodes_write(), 'data' is allocated through kcalloc(). However, it is not deallocated in the following execution if an error occurs, leading to memory leaks. To fix this issue, introduce the 'free_data' label to free 'data' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/1566154486-3713-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20infiniband: hfi1: fix a memory leak bugWenwen Wang1-1/+2
In fault_opcodes_read(), 'data' is not deallocated if debugfs_file_get() fails, leading to a memory leak. To fix this bug, introduce the 'free_data' label to free 'data' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/1566156571-4335-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx4: Fix memory leaksWenwen Wang1-2/+2
In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through kcalloc(). However, it is not always deallocated in the following execution if an error occurs, leading to memory leaks. To fix this issue, free 'tun_qp->tx_ring' whenever an error occurs. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Acked-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/cma: fix null-ptr-deref Read in cma_cleanupzhengbin1-1/+5
In cma_init, if cma_configfs_init fails, need to free the previously memory and return fail, otherwise will trigger null-ptr-deref Read in cma_cleanup. cma_cleanup cma_configfs_exit configfs_unregister_subsystem Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/1566188859-103051-1-git-send-email-zhengbin13@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Block MR WR if UMR is not possibleMoni Shoua1-5/+19
Check conditions that are mandatory to post_send UMR WQEs. 1. Modifying page size. 2. Modifying remote atomic permissions if atomic access is required. If either condition is not fulfilled then fail to post_send() flow. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-9-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Fix MR re-registration flow to use UMR properlyMoni Shoua1-1/+2
The UMR WQE in the MR re-registration flow requires that modify_atomic and modify_entity_size capabilities are enabled. Therefore, check that the these capabilities are present before going to umr flow and go through slow path if not. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-8-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Report and handle ODP support properlyMoni Shoua2-11/+12
ODP depends on the several device capabilities, among them is the ability to send UMR WQEs with that modify atomic and entity size of the MR. Therefore, only if all conditions to send such a UMR WQE are met then driver can report that ODP is supported. Use this check of conditions in all places where driver needs to know about ODP support. Also, implicit ODP support depends on ability of driver to send UMR WQEs for an indirect mkey. Therefore, verify that all conditions to do so are met when reporting support. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/mlx5: Consolidate use_umr checks into single functionMoni Shoua2-3/+15
Introduce helper function to unify various use_umr checks. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-6-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/restrack: Rewrite PID namespace check to be reliableLeon Romanovsky2-10/+8
task_active_pid_ns() is wrong API to check PID namespace because it posses some restrictions and return PID namespace where the process was allocated. It created mismatches with current namespace, which can be different. Rewrite whole rdma_is_visible_in_pid_ns() logic to provide reliable results without any relation to allocated PID namespace. Fixes: 8be565e65fa9 ("RDMA/nldev: Factor out the PID namespace check") Fixes: 6a6c306a09b5 ("RDMA/restrack: Make is_visible_in_pid_ns() as an API") Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-4-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/counters: Properly implement PID checksLeon Romanovsky1-5/+3
"Auto" configuration mode is called for visible in that PID namespace and it ensures that all counters and QPs are coexist in the same namespace and belong to same PID. Fixes: 99fa331dc862 ("RDMA/counter: Add "auto" configuration mode support") Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/core: Fix NULL pointer dereference when bind QP to counterIdo Kalir1-1/+1
If QP is not visible to the pid, then we try to decrease its reference count and return from the function before the QP pointer is initialized. This lead to NULL pointer dereference. Fix it by pass directly the res to the rdma_restract_put as arg instead of &qp->res. This fixes below call trace: [ 5845.110329] BUG: kernel NULL pointer dereference, address: 00000000000000dc [ 5845.120482] Oops: 0002 [#1] SMP PTI [ 5845.129119] RIP: 0010:rdma_restrack_put+0x5/0x30 [ib_core] [ 5845.169450] Call Trace: [ 5845.170544] rdma_counter_get_qp+0x5c/0x70 [ib_core] [ 5845.172074] rdma_counter_bind_qpn_alloc+0x6f/0x1a0 [ib_core] [ 5845.173731] nldev_stat_set_doit+0x314/0x330 [ib_core] [ 5845.175279] rdma_nl_rcv_msg+0xeb/0x1d0 [ib_core] [ 5845.176772] ? __kmalloc_node_track_caller+0x20b/0x2b0 [ 5845.178321] rdma_nl_rcv+0xcb/0x120 [ib_core] [ 5845.179753] netlink_unicast+0x179/0x220 [ 5845.181066] netlink_sendmsg+0x2d8/0x3d0 [ 5845.182338] sock_sendmsg+0x30/0x40 [ 5845.183544] __sys_sendto+0xdc/0x160 [ 5845.184832] ? syscall_trace_enter+0x1f8/0x2e0 [ 5845.186209] ? __audit_syscall_exit+0x1d9/0x280 [ 5845.187584] __x64_sys_sendto+0x24/0x30 [ 5845.188867] do_syscall_64+0x48/0x120 [ 5845.190097] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1bd8e0a9d0fd1 ("RDMA/counter: Allow manual mode configuration support") Signed-off-by: Ido Kalir <idok@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Drop stale TID RDMA packets that cause TIDErrKaike Wan1-44/+3
In a congested fabric with adaptive routing enabled, traces show that packets could be delivered out of order. A stale TID RDMA data packet could lead to TidErr if the TID entries have been released by duplicate data packets generated from retries, and subsequently erroneously force the qp into error state in the current implementation. Since the payload has already been dropped by hardware, the packet can be simply dropped and it is no longer necessary to put the qp into error state. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192058.105923.72324.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Add additional checks when handling TID RDMA WRITE DATA packetKaike Wan1-0/+7
In a congested fabric with adaptive routing enabled, traces show that packets could be delivered out of order, which could cause incorrect processing of stale packets. For stale TID RDMA WRITE DATA packets that cause KDETH EFLAGS errors, this patch adds additional checks before processing the packets. Fixes: d72fe7d5008b ("IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192051.105923.69979.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Add additional checks when handling TID RDMA READ RESP packetKaike Wan1-1/+4
In a congested fabric with adaptive routing enabled, traces show that packets could be delivered out of order, which could cause incorrect processing of stale packets. For stale TID RDMA READ RESP packets that cause KDETH EFLAGS errors, this patch adds additional checks before processing the packets. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192045.105923.59813.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Unsafe PSN checking for TID RDMA READ Resp packetKaike Wan1-2/+2
When processing a TID RDMA READ RESP packet that causes KDETH EFLAGS errors, the packet's IB PSN is checked against qp->s_last_psn and qp->s_psn without the protection of qp->s_lock, which is not safe. This patch fixes the issue by acquiring qp->s_lock first. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192039.105923.7852.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20IB/hfi1: Drop stale TID RDMA packetsKaike Wan1-2/+11
In a congested fabric with adaptive routing enabled, traces show that the sender could receive stale TID RDMA NAK packets that contain newer KDETH PSNs and older Verbs PSNs. If not dropped, these packets could cause the incorrect rewinding of the software flows and the incorrect completion of TID RDMA WRITE requests, and eventually leading to memory corruption and kernel crash. The current code drops stale TID RDMA ACK/NAK packets solely based on KDETH PSNs, which may lead to erroneous processing. This patch fixes the issue by also checking the Verbs PSN. Addition checks are added before rewinding the TID RDMA WRITE DATA packets. Fixes: 9e93e967f7b4 ("IB/hfi1: Add a function to receive TID RDMA ACK packet") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20190815192033.105923.44192.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/siw: Fix potential NULL de-refBernard Metzler1-2/+3
In siw_connect() we have an error flow where there is no valid qp pointer. Make sure we don't try to de-ref in that situation. Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190819140257.19319-1-bmt@zurich.ibm.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLBJason Gunthorpe2-8/+4
When ODP is enabled with IB_ACCESS_HUGETLB then the required pages should be calculated based on the extent of the MR, which is rounded to the nearest huge page alignment. Fixes: d2183c6f1958 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-5-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20nvme: Add quirk for LiteON CL1 devices running FW 22301111Mario Limonciello3-1/+17
One of the components in LiteON CL1 device has limitations that can be encountered based upon boundary race conditions using the nvme bus specific suspend to idle flow. When this situation occurs the drive doesn't resume properly from suspend-to-idle. LiteON has confirmed this problem and fixed in the next firmware version. As this firmware is already in the field, avoid running nvme specific suspend to idle flow. Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Charles Hyde <charles.hyde@dellteam.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme: Fix cntlid validation when not using NVMEoFGuilherme G. Piccoli1-1/+3
Commit 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") introduced a validation for controllers with duplicate cntlid that runs on nvme_init_subsystem(). The problem is that the validation relies on ctrl->cntlid, and this value is assigned (from id_ctrl value) after the call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics scenario. That leads to ctrl->cntlid always being 0 in case we have a physical set of controllers in the same subsystem. This patch fixes that by loading the discovered cntlid id_ctrl value into ctrl->cntlid before the subsystem initialization, only for the non-fabrics case. The patch was tested with emulated nvme devices (qemu) having two controllers in a single subsystem. Without the patch, we couldn't make it work failing in the duplicate check; when running with the patch, we could see the subsystem holding both controllers. For the fabrics case we see ctrl->cntlid has a more intricate relation with the admin connect, so we didn't change that. Fixes: 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme-multipath: fix possible I/O hang when paths are updatedAnton Eidelman1-0/+1
nvme_state_set_live() making a path available triggers requeue_work in order to resubmit requests that ended up on requeue_list when no paths were available. This requeue_work may race with concurrent nvme_ns_head_make_request() that do not observe the live path yet. Such concurrent requests may by made by either: - New IO submission. - Requeue_work triggered by nvme_failover_req() or another ana_work. A race may cause requeue_work capture the state of requeue_list before more requests get onto the list. These requests will stay on the list forever unless requeue_work is triggered again. In order to prevent such race, nvme_state_set_live() should synchronize_srcu(&head->srcu) before triggering the requeue_work and prevent nvme_ns_head_make_request referencing an old snapshot of the path list. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAEDexuan Cui1-1/+1
In the case of X86_PAE, unsigned long is u32, but the physical address type should be u64. Due to the bug here, the netvsc driver can not load successfully, and sometimes the VM can panic due to memory corruption (the hypervisor writes data to the wrong location). Fixes: 6ba34171bcbd ("Drivers: hv: vmbus: Remove use of slow_virt_to_phys()") Cc: stable@vger.kernel.org Cc: Michael Kelley <mikelley@microsoft.com> Reported-and-tested-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20Input: hyperv-keyboard: Use in-place iterator API in the channel callbackDexuan Cui1-29/+6
Simplify the ring buffer handling with the in-place API. Also avoid the dynamic allocation and the memory leak in the channel callback function. Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_contextDexuan Cui1-2/+0
This field is no longer used after the commit 63ed4e0c67df ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code") , because it's replaced by the global variable "struct ms_hyperv_tsc_page *tsc_pg;" (now, the variable is in drivers/clocksource/hyperv_timer.c). Fixes: 63ed4e0c67df ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-20iwlwifi: pcie: fix recognition of QuZ devicesLuca Coelho1-0/+17
If the HW revision of Qu devices we found is QuZ, then we need to switch the configuration accordingly in order to use the correct FW. Add a block of ifs in order do that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20iwlwifi: pcie: don't switch FW to qnj when ax201 is detectedLuca Coelho1-0/+1
We have a too generic condition that switches from Qu configurations to QnJ configurations. We need to exclude some configurations so that they are not erroneously switched. Add the ax201 configuration to the list of exclusions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20iwlwifi: pcie: fix the byte count table format for 22560 devicesEmmanuel Grumbach1-7/+13
Starting from 22560, the byte count is expected to be in bytes and we have now 14 bits. Ajust the code to this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20iwlwifi: mvm: Allow multicast data frames only when associatedIlan Peer2-3/+40
The MAC context configuration always allowed multicast data frames to pass to the driver for all MAC context types, and in the case of station MAC context both when associated and when not associated. One of the outcomes of this configuration is having the FW forward encrypted multicast frames to the driver with Rx status indicating that the frame was not decrypted (as expected, since no keys were configured yet) which in turn results with unnecessary error messages. Change this behavior to allow multicast data frames only when they are actually expected, e.g., station MAC context is associated etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20rt2x00: clear IV's on start to fix AP mode regressionStanislaw Gruszka3-5/+18
To do not brake HW restart we should keep initialization vectors data. I assumed that on start the data is already initialized to zeros, but that not true on some scenarios and we should clear it. So add additional flag to check if we are under HW restart and clear IV's data if we are not. Patch fixes AP mode regression. Reported-and-tested-by: Emil Karlson <jekarl@iki.fi> Fixes: 710e6cc1595e ("rt2800: do not nullify initialization vector data") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20mt76: mt76x0u: do not reset radio on resumeStanislaw Gruszka1-4/+4
On some machines mt76x0u firmware can hung during resume, what result on messages like below: [ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: stable@vger.kernel.org Fixes: 134b2d0d1fcf ("mt76x0: init files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()Wenwen Wang1-1/+3
If devm_request_irq() fails to disable all interrupts, no cleanup is performed before retuning the error. To fix this issue, invoke omap_dma_free() to do the cleanup. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1565938570-7528-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-20dmaengine: ti: dma-crossbar: Fix a memory leak bugWenwen Wang1-1/+3
In ti_dra7_xbar_probe(), 'rsv_events' is allocated through kcalloc(). Then of_property_read_u32_array() is invoked to search for the property. However, if this process fails, 'rsv_events' is not deallocated, leading to a memory leak bug. To fix this issue, free 'rsv_events' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1565938136-7249-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-20auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constantNishka Dasgupta1-2/+2
The static structures ht16k33_fb_fix and ht16k33_fb_var, of types fb_fix_screeninfo and fb_var_screeninfo respectively, are not used except to be copied into other variables. Hence make both of them constant to prevent unintended modification. Issue found with Coccinelle. Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-20HID: wacom: correct misreported EKR ring valuesAaron Armstrong Skomra1-1/+1
The EKR ring claims a range of 0 to 71 but actually reports values 1 to 72. The ring is used in relative mode so this change should not affect users. Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Fixes: 72b236d60218f ("HID: wacom: Add support for Express Key Remote.") Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-20scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQJames Smart4-4/+27
When SCSI-MQ is enabled, the SCSI-MQ layers will do pre-allocation of MQ resources based on shost values set by the driver. In newer cases of the driver, which attempts to set nr_hw_queues to the cpu count, the multipliers become excessive, with a single shost having SCSI-MQ pre-allocation reaching into the multiple GBytes range. NPIV, which creates additional shosts, only multiply this overhead. On lower-memory systems, this can exhaust system memory very quickly, resulting in a system crash or failures in the driver or elsewhere due to low memory conditions. After testing several scenarios, the situation can be mitigated by limiting the value set in shost->nr_hw_queues to 4. Although the shost values were changed, the driver still had per-cpu hardware queues of its own that allowed parallelization per-cpu. Testing revealed that even with the smallish number for nr_hw_queues for SCSI-MQ, performance levels remained near maximum with the within-driver affiinitization. A module parameter was created to allow the value set for the nr_hw_queues to be tunable. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-20nfp: flower: verify that block cb is not busy before bindingVlad Buslov1-0/+7
When processing FLOW_BLOCK_BIND command on indirect block, check that flow block cb is not busy. Fixes: 0d4fd02e7199 ("net: flow_offload: add flow_block_cb_is_busy() and use it") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ↵Christophe JAILLET1-1/+1
ATM_NICSTAR_USE_IDT77105 This should be IDT77105, not IDT77015. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds6-75/+163
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple fixes to the core framework logic that finds clk parents, a handful of samsung clk driver fixes for audio and display clks, and a small fix for the Stratix10 SoC driver that was checking the wrong register for validity" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Fix potential NULL dereference in clk_fetch_parent_index() clk: Fix falling back to legacy parent string matching clk: socfpga: stratix10: fix rate caclulationg for cnt_clks clk: samsung: exynos542x: Move MSCL subsystem clocks to its sub-CMU clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU clk: samsung: Change signature of exynos5_subcmus_init() function
2019-08-20Merge branch 'siginfo-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kernel thread signal handling fix from Eric Biederman: "I overlooked the fact that kernel threads are created with all signals set to SIG_IGN, and accidentally caused a regression in cifs and drbd when replacing force_sig with send_sig. This is my fix for that regression. I add a new function allow_kernel_signal which allows kernel threads to receive signals sent from the kernel, but continues to ignore all signals sent from userspace. This ensures the user space interface for cifs and drbd remain the same. These kernel threads depend on blocking networking calls which block until something is received or a signal is pending. Making receiving of signals somewhat necessary for these kernel threads. Perhaps someday we can cleanup those interfaces and remove allow_kernel_signal. If not allow_kernel_signal is pretty trivial and clearly documents what is going on so I don't think we will mind carrying it" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Allow cifs and drbd to receive their terminating signals
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds60-397/+519
Pull networking fixes from David Miller: 1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov. 2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan. 3) Fix severe performance regression due to lack of SKB coalescing of fragments during local delivery, from Guillaume Nault. 4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk. 5) Fix batched events in skbedit packet action, from Roman Mashak. 6) Propagate VLAN TX offload to hw_enc_features in bond and team drivers, from Yue Haibing. 7) RXRPC local endpoint refcounting fix and read after free in rxrpc_queue_local(), from David Howells. 8) Fix endian bug in ibmveth multicast list handling, from Thomas Falcon. 9) Oops, make nlmsg_parse() wrap around the correct function, __nlmsg_parse not __nla_parse(). Fix from David Ahern. 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin. 11) Fix memory leak in cxgb4, from Wenwen Wang. 12) Yet another race in AF_PACKET, from Eric Dumazet. 13) Fix false detection of retransmit failures in tipc, from Tuong Lien. 14) Use after free in ravb_tstamp_skb, from Tho Vu. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) ravb: Fix use-after-free ravb_tstamp_skb netfilter: nf_tables: map basechain priority to hardware priority net: sched: use major priority number as hardware priority wimax/i2400m: fix a memory leak bug net: cavium: fix driver name ibmvnic: Unmap DMA address of TX descriptor buffers after use bnxt_en: Fix to include flow direction in L2 key bnxt_en: Use correct src_fid to determine direction of the flow bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails bnxt_en: Improve RX doorbell sequence. bnxt_en: Fix VNIC clearing logic for 57500 chips. net: kalmia: fix memory leaks cx82310_eth: fix a memory leak bug bnx2x: Fix VF's VLAN reconfiguration in reload. Bluetooth: Add debug setting for changing minimum encryption key size tipc: fix false detection of retransmit failures lan78xx: Fix memory leaks MAINTAINERS: r8169: Update path to the driver MAINTAINERS: PHY LIBRARY: Update files in the record ...
2019-08-19HID: cp2112: prevent sleeping function called from invalid contextBenjamin Tissoires1-2/+6
When calling request_threaded_irq() with a CP2112, the function cp2112_gpio_irq_startup() is called in a IRQ context. Therefore we can not sleep, and we can not call cp2112_gpio_direction_input() there. Move the call to cp2112_gpio_direction_input() earlier to have a working driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19HID: intel-ish-hid: ipc: add EHL device idEven Xu2-0/+2
EHL is a new platform using ishtp solution, add its device id to support list. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19HID: wacom: Correct distance scale for 2nd-gen Intuos devicesJason Gerecke1-0/+2
Distance values reported by 2nd-gen Intuos tablets are on an inverted scale (0 == far, 63 == near). We need to change them over to a normal scale before reporting to userspace or else userspace drivers and applications can get confused. Ref: https://github.com/linuxwacom/input-wacom/issues/98 Fixes: eda01dab53 ("HID: wacom: Add four new Intuos devices") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 08:41:12 +0300