summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01Merge branch 'dev-5.10' into dev-5.10-inteldev-5.10.46-intelJae Hyun Yoo196-1561/+3324
This is the 5.10.46 stable release. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
2021-06-28fixup! i2c: Add mux hold/unhold msg typesJae Hyun Yoo2-13/+14
It replaces timer callback with delayed work to avoid deadlock. Tested: Passed over weekend stress test. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Change-Id: I123cacabe7c1a5988f6356deeee03a6996b87141
2021-06-24Merge tag 'v5.10.46' into dev-5.10Joel Stanley182-438/+1374
This is the 5.10.46 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24misc: Remove obsolete mctp-lpc chardevAndrew Jeffery3-451/+0
The mctp-lpc chardev is replaced (temporarily) by the raw KCS chardev. The raw chardev is required for IBM's purposes until Jeremy's socket-based MCTP patches are merged[1][2]. [1] https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.md [2] https://lore.kernel.org/openbmc/f4f5fa66542401e8d5e78c1fb30153195d384b62.camel@codeconstruct.com.au/ OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-6-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ipmi: kcs_bmc: Add a "raw" character device interfaceAndrew Jeffery3-0/+465
The existing IPMI chardev encodes IPMI behaviours as the name suggests. However, KCS devices are useful beyond IPMI (or keyboards), as they provide a means to generate IRQs and exchange arbitrary data between a BMC and its host system. Implement a "raw" KCS character device that exposes the IDR, ODR and STR registers to userspace via read() and write() implemented on a character device: +--------+--------+---------+ | Offset | read() | write() | +--------+--------+---------+ | 0 | IDR | ODR | +--------+--------+---------+ | 1 | STR | STR | +--------+--------+---------+ This interface allows userspace to implement arbitrary (though somewhat inefficient) protocols for exchanging information between a BMC and host firmware. Conceptually the KCS interface can be used as an out-of-band mechanism for interrupt-signaled control messages while bulk data transfers occur over more appropriate interfaces between the BMC and the host (which may lack their own interrupt mechanism, e.g. LPC FW cycles). poll() is provided, which will wait for IBF or OBE conditions for data reads and writes respectively. Reads of STR on its own never blocks, though accessing both offsets in the one system call may block if the data registers are not ready. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-3-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned intColin Ian King1-3/+5
The comparisons of the unsigned int hw_type to less than zero always false because it is unsigned. Fix this by using an int for the assignment and less than zero check. OpenBMC-Staging-Count: 1 Addresses-Coverity: ("Unsigned compared against 0") Fixes: 9d2df9a0ad80 ("ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration") Signed-off-by: Colin Ian King <colin.king@canonical.com> Message-Id: <20210616162913.15259-1-colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20210623033854.587464-2-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-23usb: dwc3: core: fix kernel panic when do rebootPeter Chen1-1/+1
commit 4bf584a03eec674975ee9fe36c8583d9d470dab1 upstream. When do system reboot, it calls dwc3_shutdown and the whole debugfs for dwc3 has removed first, when the gadget tries to do deinit, and remove debugfs for its endpoints, it meets NULL pointer dereference issue when call debugfs_lookup. Fix it by removing the whole dwc3 debugfs later than dwc3_drd_exit. [ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 .... [ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 2925.037005] pc : inode_permission+0x2c/0x198 [ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8 [ 2925.045903] sp : ffff80001276ba70 [ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000 [ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100 [ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001 [ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000 [ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004 [ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030 [ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420 [ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080 [ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065 [ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188 [ 2925.120671] Call trace: [ 2925.123119] inode_permission+0x2c/0x198 [ 2925.127042] lookup_one_len_common+0xb0/0xf8 [ 2925.131315] lookup_one_len_unlocked+0x34/0xb0 [ 2925.135764] lookup_positive_unlocked+0x14/0x50 [ 2925.140296] debugfs_lookup+0x68/0xa0 [ 2925.143964] dwc3_gadget_free_endpoints+0x84/0xb0 [ 2925.148675] dwc3_gadget_exit+0x28/0x78 [ 2925.152518] dwc3_drd_exit+0x100/0x1f8 [ 2925.156267] dwc3_remove+0x11c/0x120 [ 2925.159851] dwc3_shutdown+0x14/0x20 [ 2925.163432] platform_shutdown+0x28/0x38 [ 2925.167360] device_shutdown+0x15c/0x378 [ 2925.171291] kernel_restart_prepare+0x3c/0x48 [ 2925.175650] kernel_restart+0x1c/0x68 [ 2925.179316] __do_sys_reboot+0x218/0x240 [ 2925.183247] __arm64_sys_reboot+0x28/0x30 [ 2925.187262] invoke_syscall+0x48/0x100 [ 2925.191017] el0_svc_common.constprop.0+0x48/0xc8 [ 2925.195726] do_el0_svc+0x28/0x88 [ 2925.199045] el0_svc+0x20/0x30 [ 2925.202104] el0_sync_handler+0xa8/0xb0 [ 2925.205942] el0_sync+0x148/0x180 [ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660) [ 2925.215372] ---[ end trace 124254d8e485a58b ]--- [ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2925.227676] Kernel Offset: disabled [ 2925.231164] CPU features: 0x00001001,20000846 [ 2925.235521] Memory Limit: none [ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically") Cc: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.org (cherry picked from commit 2a042767814bd0edf2619f06fecd374e266ea068) Link: https://lore.kernel.org/r/20210615080847.GA10432@jackp-linux.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23usb: dwc3: debugfs: Add and remove endpoint dirs dynamicallyJack Pham3-19/+8
commit 8d396bb0a5b62b326f6be7594d8bd46b088296bd upstream. The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: stable <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23net: fec_ptp: add clock rate zero checkFugang Duan1-0/+4
commit cb3cefe3f3f8af27c6076ef7d1f00350f502055d upstream. Add clock rate zero check to fix coverity issue of "divide by 0". Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23net: stmmac: disable clocks in stmmac_remove_config_dt()Joakim Zhang1-0/+2
commit 8f269102baf788aecfcbbc6313b6bceb54c9b990 upstream. Platform drivers may call stmmac_probe_config_dt() to parse dt, could call stmmac_remove_config_dt() in error handing after dt parsed, so need disable clocks in stmmac_remove_config_dt(). Go through all platforms drivers which use stmmac_probe_config_dt(), none of them disable clocks manually, so it's safe to disable them in stmmac_remove_config_dt(). Fixes: commit d2ed0a7755fe ("net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23net: ll_temac: Fix TX BD buffer overwriteEsben Haabendal1-1/+1
commit c364df2489b8ef2f5e3159b1dff1ff1fdb16040d upstream. Just as the initial check, we need to ensure num_frag+1 buffers available, as that is the number of buffers we are going to use. This fixes a buffer overflow, which might be seen during heavy network load. Complete lockup of TEMAC was reproducible within about 10 minutes of a particular load. Fixes: 84823ff80f74 ("net: ll_temac: Fix race condition causing TX hang") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23net: ll_temac: Make sure to free skb when it is completely usedEsben Haabendal1-1/+5
commit 6aa32217a9a446275440ee8724b1ecaf1838df47 upstream. With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.Yifan Zhang1-1/+5
commit 4cbbe34807938e6e494e535a68d5ff64edac3f20 upstream. If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.Yifan Zhang1-1/+5
commit 1c0b0efd148d5b24c4932ddb3fa03c8edd6097b3 upstream. If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclcBumyong Lee1-2/+4
commit 4ad5dd2d7876d79507a20f026507d1a93b8fff10 upstream. flags varible which is the input parameter of pl330_prep_dma_cyclic() should not be used by spinlock_irq[save/restore] function. Signed-off-by: Jongho Park <jongho7.park@samsung.com> Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20210507063647.111209-1-chanho61.park@samsung.com Fixes: f6f2421c0a1c ("dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs") Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23s390/ap: Fix hanging ioctl caused by wrong msg counterHarald Freudenberger1-2/+9
commit e73a99f3287a740a07d6618e9470f4d6cb217da8 upstream. When a AP queue is switched to soft offline, all pending requests are purged out of the pending requests list and 'received' by the upper layer like zcrypt device drivers. This is also done for requests which are already enqueued into the firmware queue. A request in a firmware queue may eventually produce an response message, but there is no waiting process any more. However, the response was counted with the queue_counter and as this counter was reset to 0 with the offline switch, the pending response caused the queue_counter to get negative. The next request increased this counter to 0 (instead of 1) which caused the ap code to assume there is nothing to receive and so the response for this valid request was never tried to fetch from the firmware queue. This all caused a queue to not work properly after a switch offline/online and in the end processes to hang forever when trying to send a crypto request after an queue offline/online switch cicle. Fixed by a) making sure the counter does not drop below 0 and b) on a successful enqueue of a message has at least a value of 1. Additionally a warning is emitted, when a reply can't get assigned to a waiting process. This may be normal operation (process had timeout or has been killed) but may give a hint that something unexpected happened (like this odd behavior described above). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
commit ce00322c2365e1f7b0312f2f493539c833465d97 upstream. pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna1-0/+2
commit db2f77e2bd99dbd2fb23ddde58f0fae392fe3338 upstream. The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23PCI: aardvark: Fix kernel panic during PIO transferPali Rohár1-9/+40
commit f18139966d072dab8e4398c95ce955a9742e04f7 upstream. Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni1-0/+12
commit 4c207e7121fa92b66bf1896bf8ccb9edfb0f9731 upstream. Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23PCI: Mark TI C667X to avoid bus resetAntti Järvinen1-0/+10
commit b5cf198e74a91073d12839a3e2db99994a39995d upstream. Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23usb: chipidea: imx: Fix Battery Charger 1.2 CDP detectionBreno Lima1-2/+14
commit c6d580d96f140596d69220f60ce0cfbea4ee5c0f upstream. i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not following CDP timing requirements defined by USB BC 1.2 specification and section 3.2.4 Detection Timing CDP. During Primary Detection the i.MX device should turn on VDP_SRC and IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON, the i.MX is allowed to check the status of the D- line. Current implementation is waiting between 1ms and 2ms, and certain BC 1.2 complaint USB HUBs cannot be detected. Increase delay to 40ms allowing enough time for primary detection. During secondary detection the i.MX is required to disable VDP_SRC and IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON). Current implementation is not disabling VDP_SRC and IDM_SNK, introduce disable sequence in imx7d_charger_secondary_detection() function. VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON). Increase delay allowing enough time for detection. Cc: <stable@vger.kernel.org> Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23usb: core: hub: Disable autosuspend for Cypress CY7C65632Andrew Lunn1-0/+7
commit a7d8d1c7a7f73e780aa9ae74926ae5985b2f895f upstream. The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23can: mcba_usb: fix memory leak in mcba_usbPavel Skripkin1-2/+15
commit 91c02557174be7f72e46ed7311e3bea1939840b0 upstream. Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entryMarc Zyngier1-1/+35
[ Upstream commit 382e6e177bc1c02473e56591fe5083ae1e4904f6 ] The arm64 entry code suffers from an annoying issue on taking a NMI, as it sets PMR to a value that actually allows IRQs to be acknowledged. This is done for consistency with other parts of the code, and is in the process of being fixed. This shouldn't be a problem, as we are not enabling interrupts whilst in NMI context. However, in the infortunate scenario that we took a spurious NMI (retired before the read of IAR) *and* that there is an IRQ pending at the same time, we'll ack the IRQ in NMI context. Too bad. In order to avoid deadlocks while running something like perf, teach the GICv3 driver about this situation: if we were in a context where no interrupt should have fired, transiently set PMR to a value that only allows NMIs before acking the pending interrupt, and restore the original value after that. This papers over the core issue for the time being, and makes NMIs great again. Sort of. Fixes: 4d6a38da8e79e94c ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry") Co-developed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/lkml/20210610145731.1350460-1-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23hwmon: (scpi-hwmon) shows the negative temperature properlyRiwen Lu1-0/+9
[ Upstream commit 78d13552346289bad4a9bf8eabb5eec5e5a321a5 ] The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Tested-by: Xin Chen <chenxin@kylinos.cn> Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23radeon: use memcpy_to/fromio for UVD fw uploadChen Li1-2/+2
[ Upstream commit ab8363d3875a83f4901eb1cc00ce8afd24de6c85 ] I met a gpu addr bug recently and the kernel log tells me the pc is memcpy/memset and link register is radeon_uvd_resume. As we know, in some architectures, optimized memcpy/memset may not work well on device memory. Trival memcpy_toio/memset_io can fix this problem. BTW, amdgpu has already done it in: commit ba0b2275a678 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"), that's why it has no this issue on the same gpu and platform. Signed-off-by: Chen Li <chenli@uniontech.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23drm/sun4i: dw-hdmi: Make HDMI PHY into a platform deviceSaravana Kannan3-11/+66
[ Upstream commit 9bf3797796f570b34438235a6a537df85832bdad ] On sunxi boards that use HDMI output, HDMI device probe keeps being avoided indefinitely with these repeated messages in dmesg: platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy not ready There's a fwnode_link being created with fw_devlink=on between hdmi and hdmi-phy nodes, because both nodes have 'compatible' property set. Fw_devlink code assumes that nodes that have compatible property set will also have a device associated with them by some driver eventually. This is not the case with the current sun8i-hdmi driver. This commit makes sun8i-hdmi-phy into a proper platform device and fixes the display pipeline probe on sunxi boards that use HDMI. More context: https://lkml.org/lkml/2021/5/16/203 Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabledSergio Paracuellos1-1/+1
[ Upstream commit eb367d875f94a228c17c8538e3f2efcf2eb07ead ] In 'rt2880_pmx_group_enable' driver is printing an error and returning -EBUSY if a pin has been already enabled. This begets anoying messages in the caller when this happens like the following: rt2880-pinmux pinctrl: pcie is already enabled mt7621-pci 1e140000.pcie: Error applying setting, reverse things back To avoid this just print the already enabled message in the pinctrl driver and return 0 instead to not confuse the user with a real bad problem. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604055337.20407-1-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULLAxel Lin1-2/+2
[ Upstream commit cb2381cbecb81a8893b2d1e1af29bc2e5531df27 ] devm_gpiod_get_array_optional may return NULL if no GPIO was assigned. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210603094944.1114156-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23spi: stm32-qspi: Always wait BUSY bit to be cleared in stm32_qspi_wait_cmd()Patrice Chotard1-1/+4
[ Upstream commit d38fa9a155b2829b7e2cfcf8a4171b6dd3672808 ] In U-boot side, an issue has been encountered when QSPI source clock is running at low frequency (24 MHz for example), waiting for TCF bit to be set didn't ensure that all data has been send out the FIFO, we should also wait that BUSY bit is cleared. To prevent similar issue in kernel driver, we implement similar behavior by always waiting BUSY bit to be cleared. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210603073421.8441-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error codezpershuai1-3/+4
[ Upstream commit f131767eefc47de2f8afb7950cdea78397997d66 ] In zynq_qspi_probe function, when enable the device clock is done, the return of all the functions should goto the clk_dis_all label. If num_cs is not right then this should return a negative error code but currently it returns success. Signed-off-by: zpershuai <zpershuai@gmail.com> Link: https://lore.kernel.org/r/1622110857-21812-1-git-send-email-zpershuai@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23regulator: rtmv20: Fix to make regcache value first reading back from HWChiYuan Huang1-0/+2
[ Upstream commit 46639a5e684edd0b80ae9dff220f193feb356277 ] - Fix to make regcache value first reading back from HW. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1622542155-6373-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()Tiezhu Yang1-0/+2
[ Upstream commit aaac9a1bd370338ce372669eb9a6059d16b929aa ] Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621420659-15858-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan supportTil Jasper Ullrich1-0/+1
[ Upstream commit c0e0436cb4f6627146acdae8c77828f18db01151 ] The X1 Carbon Gen 9 uses two fans instead of one like the previous generation. This adds support for the second fan. It has been tested on my X1 Carbon Gen 9 (20XXS00100) and works fine. Signed-off-by: Til Jasper Ullrich <tju@tju.me> Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23regulator: cros-ec: Fix error code in dev_err messageAxel Lin1-1/+2
[ Upstream commit 3d681804efcb6e5d8089a433402e19179347d7ae ] Show proper error code instead of 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210512075824.620580-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net: ethernet: fix potential use-after-free in ec_bhf_removePavel Skripkin1-1/+3
[ Upstream commit 9cca0c2d70149160407bda9a9446ce0c29b6e6c6 ] static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls. Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error pathSomnath Kotur1-0/+1
[ Upstream commit 03400aaa69f916a376e11526cf591901a96a3a5c ] bnxt_ethtool_init() may have allocated some memory and we need to call bnxt_ethtool_free() to properly unwind if bnxt_init_one() fails. Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23bnxt_en: Fix TQM fastpath ring backing store computationRukhsana Ansari1-1/+1
[ Upstream commit c12e1643d2738bcd4e26252ce531878841dd3f38 ] TQM fastpath ring needs to be sized to store both the requester and responder side of RoCE QPs in TQM for supporting bi-directional tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of 2 when computing the number of entries for TQM fastpath ring. This fixes an RX pipeline stall issue when running bi-directional max RoCE QP tests. Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.") Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23bnxt_en: Rediscover PHY capabilities after firmware resetMichael Chan1-0/+5
[ Upstream commit 0afd6a4e8028cc487c240b6cfe04094e45a306e4 ] There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to rediscover the PHY capabilities after a firmware reset. This can cause some PHY related functionalities to fail after a firmware reset. For example, in multi-host, the ability for any host to configure the PHY settings may be lost after a firmware reset. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23cxgb4: fix wrong shift.Pavel Machek1-1/+1
[ Upstream commit 39eb028183bc7378bb6187067e20bf6d8c836407 ] While fixing coverity warning, commit dd2c79677375 introduced typo in shift value. Fix that. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Fixes: dd2c79677375 ("cxgb4: Fix unintentional sign extension issues") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net: cdc_eem: fix tx fixup skb leakLinyu Yuan1-1/+1
[ Upstream commit c3b26fdf1b32f91c7a3bc743384b4a298ab53ad7 ] when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)") Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net: hamradio: fix memory leak in mkiss_closePavel Skripkin1-0/+1
[ Upstream commit 7edcc682301492380fbdd604b4516af5ae667a13 ] My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23be2net: Fix an error handling path in 'be_probe()'Christophe JAILLET1-0/+1
[ Upstream commit c19c8c0e666f9259e2fc4d2fa4b9ff8e3b40ee5d ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: d6b6d9877878 ("be2net: use PCIe AER capability") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net/mlx5: Reset mkey index on creationAya Levin1-1/+1
[ Upstream commit 0232fc2ddcf4ffe01069fd1aa07922652120f44a ] Reset only the index part of the mkey and keep the variant part. On devlink reload, driver recreates mkeys, so the mkey index may change. Trying to preserve the variant part of the mkey, driver mistakenly merged the mkey index with current value. In case of a devlink reload, current value of index part is dirty, so the index may be corrupted. Fixes: 54c62e13ad76 ("{IB,net}/mlx5: Setup mkey variant before mr create command invocation") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net/mlx5: E-Switch, Allow setting GUID for host PF vportParav Pandit1-2/+0
[ Upstream commit ca36fc4d77b35b8d142cf1ed0eae5ec2e071dc3c ] E-switch should be able to set the GUID of host PF vport. Currently it returns an error. This results in below error when user attempts to configure MAC address of the PF of an external controller. $ devlink port function set pci/0000:03:00.0/196608 \ hw_addr 00:00:00:11:22:33 mlx5_core 0000:03:00.0: mlx5_esw_set_vport_mac_locked:1876:(pid 6715):\ "Failed to set vport 0 node guid, err = -22. RDMA_CM will not function properly for this VF." Check for zero vport is no longer needed. Fixes: 330077d14de1 ("net/mlx5: E-switch, Supporting setting devlink port function mac address") Signed-off-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net/mlx5: E-Switch, Read PF mac addressParav Pandit1-0/+6
[ Upstream commit bbc8222dc49db8d49add0f27bcac33f4b92193dc ] External controller PF's MAC address is not read from the device during vport setup. Fail to read this results in showing all zeros to user while the factory programmed MAC is a valid value. $ devlink port show eth1 -jp { "port": { "pci/0000:03:00.0/196608": { "type": "eth", "netdev": "eth1", "flavour": "pcipf", "controller": 1, "pfnum": 0, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Hence, read it when enabling a vport. After the fix, $ devlink port show eth1 -jp { "port": { "pci/0000:03:00.0/196608": { "type": "eth", "netdev": "eth1", "flavour": "pcipf", "controller": 1, "pfnum": 0, "splittable": false, "function": { "hw_addr": "98:03:9b:a0:60:11" } } } } Fixes: f099fde16db3 ("net/mlx5: E-switch, Support querying port function mac address") Signed-off-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net: fec_ptp: fix issue caused by refactor the fec_devtypeJoakim Zhang1-3/+1
[ Upstream commit d23765646e71b43ed2b809930411ba5c0aadee7b ] Commit da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") refactor the fec_devtype, need adjust ptp driver accordingly. Fixes: da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23net: usb: fix possible use-after-free in smsc75xx_bindDongliang Mu1-4/+6
[ Upstream commit 56b786d86694e079d8aad9b314e015cd4ac02a3d ] The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23lantiq: net: fix duplicated skb in rx descriptor ringAleksander Jan Bajkowski1-1/+2
[ Upstream commit 7ea6cd16f1599c1eac6018751eadbc5fc736b99a ] The previous commit didn't fix the bug properly. By mistake, it replaces the pointer of the next skb in the descriptor ring instead of the current one. As a result, the two descriptors are assigned the same SKB. The error is seen during the iperf test when skb_put tries to insert a second packet and exceeds the available buffer. Fixes: c7718ee96dbc ("net: lantiq: fix memory corruption in RX ring ") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 01:32:02 +0300