Age | Commit message (Expand) | Author | Files | Lines |
2012-02-15 | wl12xx: Revert "wl12xx: disable auto-arp" | Eliad Peller | 1 | -1/+2 |
2012-02-15 | wl12xx: consider encryption and QoS in auto arp template | Eliad Peller | 9 | -35/+117 |
2012-02-15 | wl12xx: add forced_ps debugfs file | Eyal Shapira | 1 | -0/+70 |
2012-02-15 | wl12xx: add forced_ps mode | Eyal Shapira | 5 | -13/+32 |
2012-02-15 | wl12xx: add suspend_listen_interval debugfs file | Eyal Shapira | 1 | -0/+59 |
2012-02-15 | wl12xx: Set different wake up conditions in case of suspend | Eyal Shapira | 5 | -9/+72 |
2012-02-15 | wl12xx: add new coex params | Eliad Peller | 2 | -0/+7 |
2012-02-15 | wl12xx: add TX_HW_ATTR_HOST_ENCRYPT flag | Eliad Peller | 2 | -4/+14 |
2012-02-15 | wl12xx: Set IEEE80211_TX_RC_SHORT_GI if short GI was used on | Pontus Fuchs | 3 | -4/+11 |
2012-02-15 | wl12xx: Set IEEE80211_TX_RC_MCS on MCS rates on TX complete. | Pontus Fuchs | 2 | -1/+15 |
2012-02-15 | wl12xx: change WLVIF_FLAG_PSM name and remove WLVIF_FLAG_PSM_REQUESTED | Eyal Shapira | 4 | -36/+23 |
2012-02-15 | wl12xx: enable/disable BET with AUTO_PS/ACTIVE | Eyal Shapira | 1 | -0/+7 |
2012-02-15 | wl12xx: remove 2 unused parameters in wl1271_ps_set_mode() | Eyal Shapira | 4 | -12/+6 |
2012-02-15 | wl12xx: add dynamic_ps_timeout debugfs file | Eyal Shapira | 1 | -0/+67 |
2012-02-15 | wl12xx: add support for HW dynamic PS | Eyal Shapira | 6 | -26/+26 |
2012-02-15 | wl12xx: remove PS management code | Eyal Shapira | 7 | -239/+5 |
2012-02-15 | wl12xx: fw api change - update cmd/acx/event enums | Eliad Peller | 6 | -134/+156 |
2012-02-15 | wl12xx: fw api change - add role_id to tsf_info | Eliad Peller | 3 | -6/+13 |
2012-02-15 | wl12xx: use dev_role_id for scans | Eliad Peller | 3 | -8/+17 |
2012-02-15 | wl12xx: fw api change - add role_id to set_template | Eliad Peller | 6 | -53/+94 |
2012-02-15 | wl12xx: don't release/claim sdio on suspend/resume | Eliad Peller | 1 | -11/+0 |
2012-02-15 | Revert "wl12xx: Change claiming of the SDIO bus" | Eliad Peller | 1 | -0/+10 |
2012-02-15 | wl12xx: remove wl1271_tx_update_filters | Eliad Peller | 1 | -31/+0 |
2012-02-15 | wl12xx: check bss_conf->assoc on CHANGED_BSSID | Eliad Peller | 1 | -1/+2 |
2012-02-15 | wl12xx: fix typo in fwlog module param description | Luciano Coelho | 1 | -1/+1 |
2012-02-15 | wl12xx: remove unnecessary shadow declaration | Luciano Coelho | 1 | -1/+2 |
2012-02-15 | wl12xx: add testmode operation to read the BD_ADDR from Fuse ROM | Luciano Coelho | 1 | -0/+50 |
2012-02-15 | wl12xx: use two MAC addresses based on the NVS or from fuse ROM | Luciano Coelho | 5 | -26/+131 |
2012-02-15 | wl12xx: read chip ID and HW PG version during probe | Luciano Coelho | 3 | -29/+46 |
2012-02-15 | wl12xx: move partition table definition to io.c | Luciano Coelho | 3 | -66/+68 |
2012-02-15 | wl12xx: cancel delayed elp work and clear flags when stopping PLT | Luciano Coelho | 1 | -3/+4 |
2012-02-15 | wl12xx: Fix potential interrupt storm | Ido Yariv | 1 | -2/+28 |
2012-02-15 | wl12xx: Power off after flushing work | Ido Yariv | 1 | -2/+5 |
2012-02-15 | wl12xx: Acquire lock before stopping plt | Ido Yariv | 1 | -13/+5 |
2012-02-15 | wl12xx: Make sure HW is available in sched scan ops | Pontus Fuchs | 1 | -0/+8 |
2012-02-15 | wl12xx: enable sparse endianess check by default | Luciano Coelho | 1 | -0/+2 |
2012-02-15 | wl1251: enable sparse endianess check by default | Luciano Coelho | 1 | -0/+2 |
2012-02-15 | wl1251: convert 32-bit values to le32 before writing to the chip | Luciano Coelho | 2 | -6/+5 |
2012-02-15 | wl1251: fix sparse warning | Luciano Coelho | 1 | -2/+0 |
2012-02-09 | rtlwifi: Modify rtl_pci_init to return 0 on success | John W. Linville | 1 | -3/+3 |
2012-02-09 | rtlwifi: Return correct failure code on error | Simon Graham | 1 | -1/+1 |
2012-02-09 | rtlwifi: Handle previous allocation failures when freeing device memory | Simon Graham | 1 | -6/+10 |
2012-02-09 | rt2x00: Correctly set txmixer_gain in RT3572 channel switching. | Gertjan van Wingerde | 2 | -7/+40 |
2012-02-09 | rt2x00: Fix RT3572 channel switch RFCSR 7 programming. | Gertjan van Wingerde | 2 | -5/+12 |
2012-02-09 | rt2x00: Align RT3572 channel switch RFCSR 1 programming with Ralink driver. | Gertjan van Wingerde | 1 | -1/+2 |
2012-02-09 | rt2x00: Fix RFCSR 12 & 13 programming on RT3572 channel switching. | Gertjan van Wingerde | 1 | -4/+2 |
2012-02-09 | rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572. | Gertjan van Wingerde | 2 | -2/+10 |
2012-02-09 | rt2x00: Update comment on freq_offset field in struct rt2x00_dev. | Gertjan van Wingerde | 1 | -1/+1 |
2012-02-09 | rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}. | Gertjan van Wingerde | 5 | -17/+31 |
2012-02-09 | rt2x00: Introduce concept of driver data in struct rt2x00_dev. | Gertjan van Wingerde | 2 | -0/+24 |