summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-08-14net: asix: Move declaration of ax88172a_info to shared headerMark Brown2-2/+2
Ensure that the definition of ax88172a_info matches the declaration seen by users and silence sparse warnings about symbols without declarations in the global namespace by moving the declaration into the shared header asix.h. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-14net: asix: Staticise non-exported symbolsMark Brown1-3/+5
Make functions that are only referenced from ops structures static, they do not need to be in the global namespace and sparse complains about this. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12net: Add MOXA ART SoCs ethernet driverJonas Jensen6-0/+925
The MOXA UC-711X hardware(s) has an ethernet controller that seem to be developed internally. The IC used is "RTL8201CP". Since there is no public documentation, this driver is mostly the one published by MOXA that has been heavily cleaned up / ported from linux 2.6.9. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10net: attempt high order allocations in sock_alloc_send_pskb()Eric Dumazet2-2/+2
Adding paged frags skbs to af_unix sockets introduced a performance regression on large sends because of additional page allocations, even if each skb could carry at least 100% more payload than before. We can instruct sock_alloc_send_pskb() to attempt high order allocations. Most of the time, it does a single page allocation instead of 8. I added an additional parameter to sock_alloc_send_pskb() to let other users to opt-in for this new feature on followup patches. Tested: Before patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 46861.15 After patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 57981.11 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10pptp: fix sparse pointer warningstephen hemminger1-1/+1
callid_sock array is referenced via rcu_dereference and sparse rcu checks complains about address space mismatch. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10tg3: clean up unnecessary MSI/MSI-X capability findYijing Wang1-1/+1
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10netxen: clean up unnecessary MSI/MSI-X capability findYijing Wang1-5/+3
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10myri10ge: clean up unnecessary MSI/MSI-X capability findYijing Wang1-3/+2
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Andrew Gallatin <gallatin@myri.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10bnx2x: clean up unnecessary MSI/MSI-X capability findYijing Wang1-5/+3
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: netdev@vger.kernel.org Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10bnx2: clean up unnecessary MSI/MSI-X capability findYijing Wang1-2/+2
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10net: via-rhine: Fix incorrect placement of __initdataSachin Kamat1-1/+1
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10net: wan: sbni: Fix incorrect placement of __initdataSachin Kamat1-1/+1
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09bonding: unwind on bond_add_vlan failurenikolay@redhat.com1-2/+2
In case of bond_add_vlan() failure currently we'll have the vlan's refcnt bumped up in all slaves, but it will never go down because it failed to get added to the bond, so properly unwind the added vlan if bond_add_vlan fails. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09bonding: change the bond's vlan syncing functions with the standard onesnikolay@redhat.com1-30/+7
Now we have vlan_vids_add/del_by_dev() which serve the same purpose as bond's bond_add/del_vlans_on_slave() with the good side effect of reverting the changes if one of the additions fails. There's only 1 change in the behaviour of enslave: if adding of the vlans to the slave fails, we'll fail the enslaving because otherwise we might delete some vlan that wasn't added by the bonding. The only way this may happen is with ENOMEM currently, so we're in trouble anyway. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08net: phy: mdio: add missing __iomem annotationJingoo Han1-1/+1
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/net/phy/mdio-mux-mmioreg.c:51:27: warning: incorrect type in initializer (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:51:27: expected void *p drivers/net/phy/mdio-mux-mmioreg.c:51:27: got void [noderef] <asn:2>* drivers/net/phy/mdio-mux-mmioreg.c:57:21: warning: incorrect type in argument 1 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:57:21: expected void const volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:57:21: got void *p drivers/net/phy/mdio-mux-mmioreg.c:60:25: warning: incorrect type in argument 2 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:60:25: expected void volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:60:25: got void *p drivers/net/phy/mdio-mux-mmioreg.c:64:25: warning: incorrect type in argument 1 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:64:25: expected void volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:64:25: got void *p Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08net: phy: micrel: Staticize ksz8873mll_read_status()Jingoo Han1-1/+1
ksz8873mll_read_status() is used only in this file. Fix the following sparse warning: drivers/net/phy/micrel.c:147:5: warning: symbol 'ksz8873mll_read_status' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08net: move zerocopy_sg_from_iovec() to net/core/datagram.cJason Wang2-160/+0
To let it be reused and reduce code duplication. Also document this function. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08net: move iov_pages() to net/core/iovec.cJason Wang2-46/+0
To let it be reused and reduce code duplication. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Update version to 2.2.4Michael Chan2-4/+4
and update copyright year. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Add pci shutdown handler.Michael Chan1-22/+25
WoL and power state changes will now be done in the shutdown handler. open/close/ethtool will no longer change the power state. NVRAM operations can now be permitted whether the device is up or down. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Use SIMPLE_DEV_PM_OPS.Michael Chan1-20/+25
This simplifies the suspend/resume code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Refactor WoL setup into a separate function.Michael Chan1-80/+81
Separate MAC and PHY WoL setup code into a separate function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Use kernel APIs for WoL and power state changes.Michael Chan1-22/+14
Simple API changes with no functional changes. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Handle error condition in ->slot_reset()Michael Chan1-5/+10
by closing the device if necessary. Otherwise, since NAPI state is already disabled, a subsequent close will hang the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: update driver versionSathya Perla1-1/+1
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Initialize "status" in be_cmd_get_die_temperature()Vasundhara Volam1-1/+1
Uninitialized value was being returned in the non-failure case. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: fixup log msgs for async eventsVasundhara Volam1-2/+4
Log the event type for unknown async events Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Fix displaying supported speeds for BE2Vasundhara Volam1-0/+6
The BE2 FW GET_PHY_DETAILS cmd does not return fixed speeds supported. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: don't limit max MAC and VLAN countsVasundhara Volam1-7/+0
For SH-R and Lancer-R, use the FW supported values for Max unicast MACs, Max VLANs and Max multicast MACs. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Do not call get_die_temperature cmd for VFVasundhara Volam1-1/+2
This is a chip wide value and the PFs already report it. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Adding more speeds reported by get_settingsVasundhara Volam2-1/+10
The new speeds are supported by variants of the Skyhawk-R chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05gianfar: Cleanup TxFCB insertion on xmitClaudiu Manoil1-29/+33
Cleanup gfar_start_xmit()'s fast path by factoring out "redundant" FCB insertion code (repeated gfar_add_fcb() calls and related) and by reducing the number of if() clauses (i.e. if(fcb) checks). Improve maintainability (e.g. there's less code and easier to read) also by introducing do_csum and do_vlan to mark the other 2 Tx TOE functionalities, following the same model as do_tstamp. fcb_len may also be 0 now, to mark that Tx FCB insertion conditions (do_csum, do_vlan, do_tstamp) have not been met. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05gianfar: Fix Tx csum generation errata handlingClaudiu Manoil1-19/+25
Both [eTSEC76] and [eTSEC12] errata relate to Tx checksum generation (for some MPC83xx and MCP8548 older revisions). They require the same workaround: manual checksum computation and insertion, and disabling the H/W Tx csum acceleration feature (per frame) through Tx FCB (Frame Control Block) csum offload settings. The workaround for [eTSEC76] needs to be fixed because it currently fails to disable H/W Tx csum insertion via FCB. This patch fixes it and provides a common workaround implementation for both Tx csum errata. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bonding: remove locking from bond_set_rx_mode()Veaceslav Falico1-6/+4
We're already protected by RTNL lock, so nothing can happen to bond/its slaves, and thus the locking is useless here (both bond->lock and bond->curr_active_slave). Also, add ASSERT_RTNL() both to bond_set_rx_mode() and bond_hw_addr_swap() to catch possible uses of it without RTNL locking. This patch also saves us from a lockdep false-positive in bond_set_rx_mode() vs bond_hw_addr_swap(). CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05drivers: net: cpsw: Add support for new CPSW IP versionMugunthan V N1-0/+3
The new IP version has a minor changes and the offsets are same as the previous version, so adding new IP version support in the driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bonding: add bond_time_in_interval() and use it for time comparisonVeaceslav Falico1-53/+32
Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bonding: call slave_last_rx() only once per slaveVeaceslav Falico1-7/+8
Simple cleanup to not call slave_last_rx() on every time function. It won't give any measurable boost - but looks cleaner and easier to understand. There are no time-consuming functions in between these calls, so it's safe to call it in the beginning only once. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05tile: fix missing unlock on error in tile_net_open()Wei Yongjun1-1/+3
Add the missing unlock before return from function tile_net_open() in the error handling case. Introduced by commit f3286a3af89d6db7a488f3e8f02b98d67d50f00c. (tile: support multiple mPIPE shims in tilegx network driver) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net: mlx4: Staticize local functionsJingoo Han1-3/+3
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/mellanox/mlx4/cmd.c:803:5: warning: symbol 'MLX4_CMD_UPDATE_QP_wrapper' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlx4/cmd.c:812:5: warning: symbol 'MLX4_CMD_GET_OP_REQ_wrapper' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlx4/cmd.c:1547:5: warning: symbol 'mlx4_master_immediate_activate_vlan_qos' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net: micrel: Staticize local functionsJingoo Han2-5/+7
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/micrel/ks8842.c:708:6: warning: symbol 'ks8842_handle_rx' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:718:6: warning: symbol 'ks8842_handle_tx' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:727:6: warning: symbol 'ks8842_handle_rx_overrun' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:735:6: warning: symbol 'ks8842_tasklet' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8851_mll.c:691:6: warning: symbol 'ks_enable_qmu' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05be2net: Staticize local functionsJingoo Han3-19/+20
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:475:6: warning: symbol 'populate_erx_stats' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:1485:6: warning: symbol 'be_rx_compl_process_gro' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:2262:5: warning: symbol 'be_poll' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3223:6: warning: symbol 'flash_cookie' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3280:27: warning: symbol 'get_fsec_info' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1013:5: warning: symbol 'be_cmd_mccq_ext_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1071:5: warning: symbol 'be_cmd_mccq_org_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3166:5: warning: symbol 'be_cmd_get_profile_config_mbox' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3194:5: warning: symbol 'be_cmd_get_profile_config_mccq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:96:6: warning: symbol '_be_roce_dev_remove' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:113:6: warning: symbol '_be_roce_dev_open' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:129:6: warning: symbol '_be_roce_dev_close' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bna: Staticize local functionsJingoo Han1-5/+5
bna_rx_sm_stop_wait_entry(), bna_rx_sm_rxf_stop_wait_entry(), bna_rx_sm_started_entry(), bna_rx_sm_cleanup_wait_entry(), and bna_rx_sm_cleanup_wait() are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1423:1: warning: symbol 'bna_rx_sm_stop_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1476:1: warning: symbol 'bna_rx_sm_rxf_stop_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1532:1: warning: symbol 'bna_rx_sm_started_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1597:1: warning: symbol 'bna_rx_sm_cleanup_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1602:1: warning: symbol 'bna_rx_sm_cleanup_wait' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05vxlan: fix rcu related warningstephen hemminger1-5/+11
Vxlan remote list is protected by RCU and guaranteed to be non-empty. Split out the rcu and non-rcu access to the list to fix warning Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04ax88179_178a: avoid copy of tx tcp packetsEric Dumazet1-17/+4
ax88179_tx_fixup() has quite complex code trying to push 8 bytes of control data (len/mss), but fails to do it properly for TCP packets, incurring an extra copy and point of memory allocation failure. Lets use the simple and approved way. dev->needed_headroom being 8, all frames should have 8 bytes of headroom, so the extra copy should be unlikely anyway. This patch should improve performance for TCP xmits. Reported-by: Ming Lei <ming.lei@canonical.com> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller537-95275/+6940
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds49-403/+665
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
2013-08-03qlcnic: Fix for flash update failure on 83xx adapterHimanshu Madhani10-132/+231
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed and duplex display for 83xx adapterRajesh Borundia1-9/+16
o Set link speed and duplex to unknown when link is not up. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed display for 82xx adapterRajesh Borundia1-3/+7
o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix external loopback test.Shahed Shaikh1-2/+10
Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-29 09:26:06 +0300